{"product_id":"kooks-full-3-stainless-steel-connection-adapter-2015-2026-mustang-gt-5-0l-part-11513010","title":"Kooks Full 3\" Stainless Steel Connection Adapter (2015–2026 Mustang GT 5.0L) – Part #11513010","description":"\u003cp\u003eThe Kooks Full 3\" Stainless Steel Connection Adapter, part number 11513010, joins Kooks headers or mid-pipes to a stock or stock-style rear exhaust on the 5.0L Mustang GT. It is fabricated from T304 stainless steel and keeps a full 3\" diameter through the transition, so the larger aftermarket piping does not have to neck down where it meets the cat-back.\u003c\/p\u003e\n\u003cp\u003eThis adapter is aimed at owners who have installed Kooks full 3\" long tube headers or mid-pipes but have not yet replaced the cat-back, and at anyone upgrading the exhaust in stages or replacing only part of the system. It addresses the mismatched connection points between those parts. Kooks notes that if you plan to run a complete Kooks system, a full cat-back is the better route and this adapter is not needed.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull 3\" diameter maintained through the adapter to avoid stepping down to stock pipe sizing\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction for corrosion resistance on street or track cars\u003c\/li\u003e\n\u003cli\u003eMandrel-bent transitions with smooth internal surfaces to reduce turbulence\u003c\/li\u003e\n\u003cli\u003eDesigned to mate Kooks full 3\" headers or mid-pipes with stock or stock-style cat-back systems\u003c\/li\u003e\n\u003cli\u003eFixed design with no adjustability\u003c\/li\u003e\n\u003cli\u003eHelps keep pipe diameter consistent for exhaust scavenging; weight savings are minimal\u003c\/li\u003e\n\u003cli\u003eNo tuning or calibration required\u003c\/li\u003e\n\u003cli\u003eKooks part number 11513010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eKooks builds this adapter from T304 stainless steel, a material chosen for its resistance to corrosion under both daily driving and track use. Compared with mass-produced factory adapters, the manufacturer states the stainless construction gives a tighter seal and better durability at the joint.\u003c\/p\u003e\u003cp\u003eThe transitions are mandrel bent, which keeps the internal surfaces smooth and the pipe diameter consistent through each bend. The adapter is a fixed piece rather than an adjustable one, so it is intended to locate the connection in a set position between the Kooks components and the rear exhaust.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBy carrying a full 3\" diameter from the Kooks headers or mid-pipes to the rear section, the adapter removes the restriction created when larger aftermarket piping is forced down to stock sizing. Kooks states the smooth mandrel-bent internals reduce turbulence and that the consistent diameter supports exhaust scavenging.\u003c\/p\u003e\u003cp\u003eKooks describes the weight savings from this part as minimal; its main purpose is a properly sealed, unrestricted connection between performance and stock-style components.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKooks states it installs without modification when pairing Kooks headers or mid-pipes with a factory or factory-style cat-back\u003c\/li\u003e\n\u003cli\u003eCorrect alignment with your existing exhaust system is required\u003c\/li\u003e\n\u003cli\u003eNo tuning or calibration is needed\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended if you are not experienced with exhaust fitment and sealing\u003c\/li\u003e\n\u003cli\u003eNot compatible with every aftermarket system; it is intended for Kooks full 3\" headers or mid-pipes used with stock or stock-style cat-backs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou have Kooks full 3\" long tube headers or mid-pipes and are still running a stock or stock-style cat-back\u003c\/li\u003e\n\u003cli\u003eIt resolves mismatched connection points between the aftermarket front section and the rear exhaust\u003c\/li\u003e\n\u003cli\u003eIt keeps a full 3\" path rather than reducing to stock pipe size at the joint\u003c\/li\u003e\n\u003cli\u003eT304 stainless construction suits both daily-driven and track cars\u003c\/li\u003e\n\u003cli\u003eIt lets you build or upgrade the exhaust in stages without replacing the entire system at once\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003enot compatible with all aftermarket systems\u003c\/li\u003e\n\u003cli\u003eWill not fit GT350, GT500, or EcoBoost models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304696508601,"sku":"KOO-11513010","price":56.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/0f6968d2ad301b42d6d3924d660d74b6_c773f5e0-1d78-4547-881e-290da4905b7b.png?v=1794374965","url":"https:\/\/engmustangs.com\/products\/kooks-full-3-stainless-steel-connection-adapter-2015-2026-mustang-gt-5-0l-part-11513010","provider":"ENG Mustangs","version":"1.0","type":"link"}