Ford Performance Parts

Ford Performance Touring Cat-Back Exhaust System – 2.5” Stainless Steel w/ 4” Chrome Tips (2015–2017 & 2026 Mustang GT, Non-Active) – M-5200-M8TC

$1,205.00
OEM Genuine Ford Performance part, made by Ford. OEM parts usually cost more than aftermarket.
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The Ford Performance Touring Cat-Back Exhaust System, part number M-5200-M8TC, is a non-valved replacement for the factory cat-back on Coyote 5.0-powered Mustang GT models that left the factory without active exhaust. It uses Touring mufflers developed by Ford Performance, mandrel-bent 2.5-inch tubing in 304 stainless steel, and four polished 4-inch chrome tips. The goal is a more noticeable exhaust note than stock while keeping the car comfortable enough to drive every day.

Ford Performance says the system reduces restriction through the mid and rear sections for better breathing and throttle response, particularly under load. It also replaces the stock tips with a more finished-looking polished chrome set. It bolts to the factory mounting points with OEM hardware and needs no tuning, so it suits owners who want a clean OEM+ upgrade in sound, durability, and appearance without a loud, aggressive exhaust.

Key Features

  • Touring mufflers tuned by Ford Performance for a cleaner, lower 5.0 exhaust note
  • Manufacturer states the Touring mufflers are designed to avoid drone
  • Mandrel-bent 2.5-inch stainless steel tubing for consistent flow from flange to tip
  • 304 stainless steel construction for corrosion resistance
  • Quad 4-inch polished chrome tips
  • Fixed, non-valved design for Mustang GT models without factory active exhaust
  • Reduced restriction through the mid and rear sections compared with stock
  • Slight weight reduction compared with the factory system, per the manufacturer
  • Bolt-on installation using OEM mounting points and hardware
  • No tuning, calibration, or additional components required
  • Part number M-5200-M8TC

Mandrel-Bent 304 Stainless Steel Construction

The tubing is 304 stainless steel, which Ford Performance chose for durability in everyday conditions. The manufacturer says it holds up against road grime, moisture, and repeated heat cycles, and that it resists corrosion far better than the factory system.

The 2.5-inch tubing is mandrel-bent, so the pipe keeps its full diameter through each bend. That avoids the crimped or flattened sections that can restrict flow in crush-bent tubing and keeps the exhaust path consistent along the whole length of the system.

Performance and Benefits

The Touring mufflers are tuned to bring out more of the 5.0 V8's character than the stock system without becoming harsh. Ford Performance describes the result as a cleaner, lower tone without drone, intended for daily commuting as well as occasional spirited driving.

With less restriction in the mid and rear sections, the system is meant to help the engine breathe more freely and respond better, especially under load. The manufacturer also lists a slight weight reduction compared with the factory exhaust.

At the rear, four polished 4-inch chrome tips replace the stock tips. They add a brighter, more finished look that stays within an OEM+ style.

Installation

  • Bolts on at the factory mounting points using OEM hardware, with no modifications called for
  • No engine tune or recalibration is needed after installation
  • No extra parts or wiring harnesses are needed
  • Ford Performance recommends professional installation to get correct tip alignment and proper sealing
  • Designed as a complete system; it is not intended to be combined with other aftermarket or factory mid-pipes
  • Non-valved system; not for vehicles equipped with factory active exhaust

Why You Need This

  • You drive a Mustang GT without active exhaust and want a deeper, more noticeable tone that still works for daily driving
  • You want a system built from 304 stainless steel that resists corrosion better than the factory exhaust
  • You prefer mandrel-bent tubing that keeps a consistent diameter and flow path
  • You want polished quad 4-inch chrome tips for a more finished rear appearance
  • You want a bolt-on upgrade that needs no tune and no additional parts

Vehicle Fitment

  • 2026 Ford Mustang GT

Fitment notes:

  • Does not fit EcoBoost, Mach 1, Dark Horse, or models with factory active exhaust
  • Not compatible with active exhaust models—this is a non-valved system
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.