Ford Performance Parts

Ford Performance Touring Cat-Back Exhaust System – 2.5” Stainless Steel w/ 4” Black Tips (2015–2017 & 2026 Mustang GT, Non-Active) – M-5200-M8TB

$1,250.00
OEM Genuine Ford Performance part, made by Ford. OEM parts usually cost more than aftermarket.
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The Ford Performance Touring Cat-Back Exhaust System, part number M-5200-M8TB, replaces the factory exhaust on non-active-exhaust Mustang GT models from the catalytic converters back. It pairs Ford Performance-tuned Touring mufflers with mandrel-bent 2.5 inch 304 stainless steel tubing and four 4 inch tips finished in black powder coat. The aim is a fuller, deeper version of the 5.0L V8's voice than the stock system allows, while keeping cabin drone at a level that suits daily driving.

This system is aimed at GT owners who want more character from their exhaust without stepping up to a track-focused, high-volume setup. It installs as a bolt-on, uses the factory hanger and connection points, and needs no tuning, calibration, modules, or harnesses. The black tips give the rear of the car a darker, understated look that works well on blacked-out or dark-themed builds.

Key Features

  • Ford Performance-tuned Touring mufflers developed for a deeper, fuller tone with reduced harshness, particularly during acceleration and under load
  • Four 4 inch tips with a heat-resistant black powder-coated finish
  • 304 stainless steel construction throughout
  • Mandrel-bent 2.5 inch piping for smooth, consistent exhaust routing
  • Fixed design with no exhaust valve integration
  • Complete cat-back system that is not intended to be combined with stock mid-pipes or components from other systems
  • No additional components required
  • Bolt-on fitment using all OEM hanger and connection points
  • No calibration or tuning needed
  • Manufacturer part number M-5200-M8TB

304 Stainless Steel Construction with Mandrel-Bent 2.5 Inch Tubing

Ford Performance builds this cat-back from 304 stainless steel, a material chosen to stand up to road salt, grime, and exhaust heat over the long term. According to the manufacturer, the system is engineered to resist corrosion, cracking, and discoloration across a wide range of driving conditions, an area where a factory exhaust can begin to show wear over time.

The 2.5 inch tubing is mandrel bent, so the pipe keeps its full diameter through every bend rather than kinking or narrowing. The four 4 inch tips are powder coated in black, a finish selected for its ability to cope with the heat at the outlets while holding its appearance.

Performance and Benefits

The Touring mufflers are tuned to bring out more of the V8's low-end rumble while cutting back on raspy, harsh frequencies, especially when the engine is working hard. The result is a deeper, more aggressive note than stock that still lets you hold a phone conversation and cruise comfortably, with in-cabin drone kept low and no harsh cold starts, according to Ford Performance.

With less restriction than the factory system, the 5.0L can exhale more freely. The manufacturer credits this with improved throttle response and slight performance gains at higher RPM, though no specific horsepower or torque figures are provided.

Weight reduction was not a primary design goal for this system, and the manufacturer describes the weight savings compared with the stock exhaust as minimal.

Installation

  • Fully bolt-on installation using all factory hanger and connection points
  • No calibration or tuning required
  • No supporting modules or wiring harnesses required
  • Professional installation is recommended to achieve the best fit and tip alignment
  • Designed as a complete cat-back system; do not combine with stock mid-pipes or parts from other exhaust systems
  • Not compatible with active exhaust or dual-mode factory exhaust systems

Why You Need This

  • You want a deeper, more pronounced V8 tone than the factory exhaust delivers without the volume of a track-oriented system
  • You drive your GT daily and need cabin drone kept low enough for comfortable cruising
  • You live where road salt and grime are a concern and want the corrosion resistance of 304 stainless steel
  • You prefer a bolt-on upgrade that uses factory mounting points and requires no tuning or extra electronics
  • You are building a blacked-out or dark-themed car and want black tips that match

Vehicle Fitment

  • 2015-2017 Ford Mustang GT
  • 2026 Ford Mustang GT

Fitment notes:

  • Excludes Mach 1, EcoBoost, Dark Horse, and all active-valve models
  • Not compatible with active exhaust or dual-mode factory systems
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.