Ford Performance Parts

Ford Performance Sport Cat-Back Exhaust System – 2.5” Stainless Steel w/ 4” Chrome Tips (2015–2017 & 2026 Mustang GT, Non-Active) – M-5200-M8SC

$1,156.00
OEM Genuine Ford Performance part, made by Ford. OEM parts usually cost more than aftermarket.
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The Ford Performance Sport Cat-Back Exhaust System, part number M-5200-M8SC, replaces the factory exhaust from the mid-pipe flanges rearward on non-active-exhaust Mustang GT models. It pairs mandrel-bent 2.5 inch tubing with Ford Performance tuned mufflers and quad 4 inch chrome tips, all built from 304 stainless steel. This is a fixed, non-valved design that brings out more of the Coyote 5.0 V8's character than the stock system without becoming overbearing.

Ford Performance developed this system for GT owners who want more sound and better exhaust flow from a simple bolt-on. It mounts to the factory mid-pipe flanges, reuses the OEM hangers and hardware, and needs no tuning or reprogramming. It is a strong fit for stock cars and mild bolt-on builds where factory-level fit and finish matter as much as tone. It is not intended for EcoBoost, Dark Horse, or Mach 1 models, or for any Mustang equipped with factory active exhaust.

Key Features

  • Ford Performance tuned mufflers voiced for the Coyote V8, with a deep, crackling note under throttle and a smooth burble at idle
  • 304 stainless steel construction for corrosion resistance
  • Mandrel-bent 2.5 inch tubing for a smooth, uninterrupted flow path from flange to tip
  • Quad 4 inch polished chrome tips that fill out the rear valance for an OEM+ appearance
  • Fixed, non-valved design tuned for an aggressive sound, with no valve control
  • Slight weight reduction compared with the stock system, per the manufacturer
  • Bolts directly to the factory mid-pipe flanges and uses OEM hangers and hardware
  • No tuning or reprogramming required
  • No additional components required
  • Part number M-5200-M8SC

304 Stainless Steel, Mandrel-Bent Construction

The entire system is made from 304 stainless steel. Ford Performance chose it for corrosion resistance so the exhaust holds up to road conditions and weather that can eventually degrade a factory system.

The 2.5 inch tubing is mandrel bent, which keeps the inside diameter consistent through every bend. That avoids the pinch points of crush-bent tubing and keeps the flow path smooth from the mid-pipe flange to the tips. The quad 4 inch tips have a polished chrome finish and are sized to fill the rear valance cleanly for a factory-integrated look.

Performance and Benefits

The factory GT exhaust smothers much of the V8's character. Ford Performance's tuned mufflers are matched to the Coyote's tone curve, giving a deeper, crackling exhaust note under load while keeping a smooth burble at idle. The goal is a more aggressive sound that stays well short of obnoxious for everyday driving.

Reduced restriction compared with stock is intended to sharpen throttle response and improve pull at the top of the rev range. The system also weighs slightly less than the factory exhaust. Because it uses a fixed design with no valves, the sound character stays the same at all times. Ford Performance notes that to get the full performance benefit, the cat-back should be combined with long-tube style headers or a higher-flowing mid-pipe section.

Installation

  • Bolts directly to the factory mid-pipe flanges
  • Uses the OEM hangers and hardware
  • No tuning or reprogramming required
  • No additional components required
  • Professional installation is recommended, particularly to get correct tip alignment and a proper seal

Why You Need This

  • Gives the Coyote V8 a more aggressive, characterful exhaust note than the factory system while remaining livable on the street
  • Reduced restriction compared with stock for improved throttle response and top-end pull
  • 304 stainless steel construction resists corrosion for long service life
  • Simple bolt-on design that uses factory mounting points and requires no tuning
  • Quad 4 inch chrome tips provide a clean, OEM+ finish at the rear valance
  • Engineered and tuned by Ford Performance for non-active-exhaust Mustang GT models

Vehicle Fitment

  • 2026 Ford Mustang GT

Fitment notes:

  • Excludes EcoBoost, Dark Horse, Mach 1, or any Mustang with factory active exhaust systems
  • Not compatible with active exhaust setups—this is a non-valved system
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.