The Ford Performance Sport Active Cat-Back Exhaust System, part number M-5200-M5SC, is a complete replacement for the factory exhaust from the catalytic converters back on the 2024 and newer Mustang GT. It is built for cars equipped with active exhaust valves and works with those factory valves, so the driver can move the exhaust note from a restrained, refined tone to a far more aggressive one on demand. The system uses 3-inch mandrel-bent T304 stainless steel tubing and finishes in four 4-inch polished chrome tips that keep a clean, factory-style look at the rear of the car.
For owners of the current-generation Mustang GT, this system offers a deeper, more assertive exhaust character without giving up the comfort of a quieter mode for daily driving. It bolts onto the existing active valves and retains the factory valence, with no cutting or welding required. That makes it a practical choice for enthusiasts who want a noticeable change in sound and appearance from a factory-engineered part they can install in their own garage.
Key Features
- Ford Performance part number M-5200-M5SC
- Cat-back configuration with active exhaust compatibility
- Works with the factory active exhaust valves for adjustable exhaust tone
- 3-inch mandrel-bent tubing
- T304 stainless steel construction
- Quad 4-inch tips in a polished chrome finish
- Retains the factory rear valence; no valence included
- Direct bolt-on installation with no cutting or welding
- Sound character described by the manufacturer as refined and deep at idle, a progressive growl under acceleration, and bold at wide open throttle
T304 Stainless Steel, Mandrel-Bent Construction
Ford Performance builds this cat-back from T304 stainless steel, a material commonly chosen for exhaust systems because of its resistance to corrosion. The tubing is 3 inches in diameter and mandrel bent, which keeps the pipe's diameter consistent through each bend rather than crimping it as conventional press bending can.
The system ends in four 4-inch tips finished in polished chrome. The tips are styled to look like original equipment, and the system is designed to work with the Mustang GT's factory valence and active exhaust valves rather than replacing them.
Performance and Benefits
Ford Performance describes a sound profile that changes noticeably with throttle input. At idle the system produces a refined, sporty tone with audible depth. Under acceleration the note becomes a smooth, muscular growl that builds progressively as the throttle opens, and at wide open throttle it turns bold and assertive.
Because the system retains the factory active exhaust valves, the driver can choose between a more subdued tone for cruising and a more aggressive one for spirited driving. According to the manufacturer, the 3-inch mandrel-bent stainless tubing improves exhaust flow and overall throttle response compared with the stock system.
Installation
- Direct bolt-on installation for the 2024 and newer Mustang GT with active exhaust
- Typical installation time is 2 to 3 hours
- Requires only basic hand tools
- No cutting or welding required
- Connects to the existing active exhaust valves
- Uses the factory rear valence
Why You Need This
- You want a deeper, more aggressive exhaust note on your Mustang GT while keeping the ability to quiet it down through the factory active valves
- You prefer T304 stainless steel construction with mandrel-bent 3-inch tubing over the stock system
- You want quad 4-inch polished chrome tips that keep an original-equipment appearance
- You plan to install it yourself and want a bolt-on system that needs no cutting or welding and reuses the factory valence
Vehicle Fitment
- 2024-2026 Ford Mustang GT