{"product_id":"ford-performance-extreme-non-active-cat-back-w-valance-and-black-tips-2026-mustang-gt-m-5200-m5ebv","title":"Ford Performance Extreme Non-Active Cat-Back w\/ Valance \u0026 Black Tips (2026 Mustang GT) – M-5200-M5EBV","description":"\u003cp\u003eThe Ford Performance Parts Extreme cat-back, part number M-5200-M5EBV, is a non-active exhaust system developed for the 2026 Mustang GT. It replaces the factory exhaust from the catalytic converters rearward with mandrel-bent 304 stainless steel tubing and quad 4.5-inch black chrome tips. A matching rear valance is included, giving the rear of the S650 an integrated, OEM-plus appearance.\u003c\/p\u003e\n\u003cp\u003eThe system targets owners who want a more aggressive exhaust note and improved flow without dealing with active valves or drive modes. Ford Performance Parts states it produces a deeper tone under load and a clean idle burble while avoiding drone at highway speeds. It bolts into the stock mounting locations, needs no tune or reflash, and is intended to work alongside later bolt-on upgrades such as long-tube headers without becoming a restriction.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing in place of the crimped factory pipes\u003c\/li\u003e\n\u003cli\u003eQuad 4.5-inch black chrome exhaust tips\u003c\/li\u003e\n\u003cli\u003eRear valance included for an integrated, factory-style finish\u003c\/li\u003e\n\u003cli\u003eNon-active design with no valves and no selectable modes\u003c\/li\u003e\n\u003cli\u003eHigh-flow layout intended to reduce backpressure\u003c\/li\u003e\n\u003cli\u003eNo tuning or reprogramming required\u003c\/li\u003e\n\u003cli\u003eUses stock mounting locations\u003c\/li\u003e\n\u003cli\u003eNo additional components required for a factory vehicle setup\u003c\/li\u003e\n\u003cli\u003ePart number M-5200-M5EBV\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe tubing is made from 304 stainless steel, which Ford Performance Parts selected for its resistance to corrosion from exhaust heat, road salt, and track use. The manufacturer positions this material as more durable under heat and hard use than the factory system.\u003c\/p\u003e\u003cp\u003eEvery bend is mandrel-formed, so the pipe keeps a consistent diameter through the curves instead of being crimped as on the stock pipes. The included rear valance and black chrome tips are designed to provide a clean, OE-level fit and finish at the back of the car.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eOn sound, Ford Performance Parts describes a richer, deeper note under throttle and a clean burble at idle, without excessive drone inside the cabin during freeway cruising. With no valves or modes, the exhaust note stays the same every time the car is driven.\u003c\/p\u003e\u003cp\u003eMandrel-bent tubing lets exhaust gases move more freely than the factory crimped pipes, and the manufacturer says this reduced backpressure helps top-end pull and throttle response. No specific horsepower or torque figures are published. The design emphasizes flow and durability rather than weight reduction, and no weight savings are claimed. Ford Performance Parts also notes the system will not bottleneck a car that is being built toward a full bolt-on package or that later receives long-tube headers.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on design that uses the stock mounting locations\u003c\/li\u003e\n\u003cli\u003eNo tuning, reflash, or reprogramming required\u003c\/li\u003e\n\u003cli\u003eNo additional components required for a factory vehicle setup\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended for the best fitment of the rear valance section\u003c\/li\u003e\n\u003cli\u003eThis is a non-active system; on a car equipped with factory active exhaust, that feature will be lost or disabled\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSwaps the factory exhaust for 304 stainless steel built to stand up to heat, road salt, and track use\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing improves flow compared with the crimped stock pipes\u003c\/li\u003e\n\u003cli\u003eProvides a deeper, more aggressive tone without highway drone, according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eRequires no tune, so it can be installed without changing engine calibration\u003c\/li\u003e\n\u003cli\u003eThe included valance and 4.5-inch black chrome quad tips give the rear end an integrated look\u003c\/li\u003e\n\u003cli\u003eA simple non-active layout with no valves or modes to set up or maintain\u003c\/li\u003e\n\u003cli\u003eBuilt to suit future bolt-on and long-tube header upgrades without restricting flow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang EcoBoost \/ GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not fit GT500, EcoBoost, or convertible models\u003c\/li\u003e\n\u003cli\u003eNot compatible with active exhaust-equipped Mustangs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system with quad 4.5-inch black chrome tips\u003c\/li\u003e\n\u003cli\u003eRear valance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68306142363833,"sku":"FRPM-5200-M5EBV","price":2133.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M-5200-M5EBV_3.jpg?v=1794436170","url":"https:\/\/engmustangs.com\/products\/ford-performance-extreme-non-active-cat-back-w-valance-and-black-tips-2026-mustang-gt-m-5200-m5ebv","provider":"ENG Mustangs","version":"1.0","type":"link"}