{"product_id":"ford-performance-by-borla-2-5-extreme-catback-exhaust-system-with-4-carbon-fiber-quad-tips-without-active-exhaust-2018-2023-mustang-gt","title":"Ford Performance by Borla 2.5\" Extreme Catback Exhaust System with 4\" Carbon Fiber Quad Tips without Active Exhaust (2018-2023 Mustang GT)","description":"\u003cp\u003eThe Ford Performance by Borla Extreme Cat-Back Exhaust System is a 304 stainless steel replacement for the factory cat-back on 2018-2023 Mustang GT models that were built without the Active Exhaust Option. It runs 2-1\/2 inch mandrel-bent tubing through an integral X-pipe and finishes with four 4 inch carbon fiber exhaust tips. The goal is a much louder, more aggressive exhaust note than stock. It is the loudest system in the Ford Performance exhaust lineup.\u003c\/p\u003e\n\u003cp\u003eThis system is aimed at S550 GT owners whose cars do not have the factory valved exhaust and who want the most aggressive sound Ford Performance offers. It bolts to the stock catalytic converters and uses the factory hangers and mounts. It is also roughly 30 lbs lighter than the factory cat-back. Note that it is engineered only for 2018 and later cars and will not fit 2015-2017 models, regardless of which rear valance is installed.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBuilt from 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e2-1\/2 inch mandrel-bent stainless steel cat-back tubing\u003c\/li\u003e\n\u003cli\u003eHigh-flow integral X-pipe\u003c\/li\u003e\n\u003cli\u003eFour 4 inch carbon fiber exhaust tips\u003c\/li\u003e\n\u003cli\u003eExtreme sound level, the loudest option in the Ford Performance exhaust lineup\u003c\/li\u003e\n\u003cli\u003eSmooth mandrel bends and warp-free flanges\u003c\/li\u003e\n\u003cli\u003eBolts directly to the stock catalytic converters\u003c\/li\u003e\n\u003cli\u003eUses the factory hangers and mounts\u003c\/li\u003e\n\u003cli\u003eApproximately 30 lbs lighter than the factory cat-back system\u003c\/li\u003e\n\u003cli\u003eDesigned for vehicles without the factory Active Exhaust Option\u003c\/li\u003e\n\u003cli\u003eProduced in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eThe system is fabricated from 304 stainless steel, a grade chosen for durability and long service life in an exhaust application. The tubing is 2-1\/2 inch diameter and mandrel bent throughout. Mandrel bending keeps the tube diameter consistent through each bend rather than crimping it, which preserves a high-flow path from the converters to the tips.\u003c\/p\u003e\u003cp\u003eThe manufacturer specifies warp-free flanges to support a reliable seal at each joint. An integral X-pipe is built into the system rather than added as a separate section. The exhaust is finished with four 4 inch carbon fiber tips, and the system is produced in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound is the main reason to choose this system. Ford Performance rates the Extreme as the loudest option in its exhaust range, with a significantly louder and more aggressive tone than the factory setup. For non-active GT owners who want the most volume from a Ford Performance cat-back, this is the top of the lineup.\u003c\/p\u003e\u003cp\u003eFlow comes from the combination of 2-1\/2 inch mandrel-bent tubing and the high-flow integral X-pipe. The manufacturer also says the system was tuned specifically for this application, though it does not publish horsepower or torque figures.\u003c\/p\u003e\u003cp\u003eThe system weighs approximately 30 lbs less than the factory cat-back, which takes that weight off the rear of the car.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolts directly to the stock catalytic converters\u003c\/li\u003e\n\u003cli\u003eMounts using the factory hangers and mounts\u003c\/li\u003e\n\u003cli\u003eThe manufacturer describes installation as quick and easy\u003c\/li\u003e\n\u003cli\u003eConfirm the vehicle does not have the factory Active Exhaust Option before installing, since the system is designed only for non-active cars\u003c\/li\u003e\n\u003cli\u003eWill not fit 2015-2017 models, regardless of the rear valance installed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the loudest exhaust note available in the Ford Performance cat-back lineup for your non-active 2018-2023 GT\u003c\/li\u003e\n\u003cli\u003eYou want 304 stainless steel construction with mandrel-bent 2-1\/2 inch tubing and an integral X-pipe\u003c\/li\u003e\n\u003cli\u003eYou want to remove approximately 30 lbs compared with the factory cat-back\u003c\/li\u003e\n\u003cli\u003eYou prefer a bolt-on system that reuses the stock converters, hangers, and mounts\u003c\/li\u003e\n\u003cli\u003eYou want four 4 inch carbon fiber tips as part of the rear-end appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003ewill NOT fit 2015-2017 models regardless of the installed valance\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68304705290425,"sku":"FPP-M-5200-M8EFA","price":2639.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M-5200-M8SFA_10.jpg?v=1794436015","url":"https:\/\/engmustangs.com\/products\/ford-performance-by-borla-2-5-extreme-catback-exhaust-system-with-4-carbon-fiber-quad-tips-without-active-exhaust-2018-2023-mustang-gt","provider":"ENG Mustangs","version":"1.0","type":"link"}