CPE

CP-e 2015-2018 Mustang 2.3L Ecoboost QKspl™ High Flow Catted Downpipe

$799.95
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The CP-e QKspl High Flow Catted Downpipe is a full 3.00 inch replacement downpipe for the 2015-2018 Mustang with the 2.3L EcoBoost engine. It is mandrel bent from American-made bright annealed 304 stainless steel and connects to the factory turbocharger through a laser cut flange matched to the stock turbo outlet. The catalytic converter is a high flow unit built around a metallic monolithic honeycomb catalyst, which CP-e designed for maximum flow and surface area.

The downpipe is intended to bolt into the factory mounting points and connect to either the stock exhaust or a full 3.00 inch system. A slip joint at the outlet handles that connection, so the downpipe stays at 3.00 inch along its full length instead of narrowing at the flange, and you can upgrade the rest of the exhaust later without replacing it. It has provisions for both factory O2 sensors plus a third bung for a wideband, a welded bracket for the stock support mount, and a supplied custom gasket. CP-e builds it in the U.S.A. and covers it with a lifetime warranty.

Key Features

  • Full 3.00 inch diameter construction
  • Mandrel bent throughout for smoother, less turbulent exhaust flow
  • Bright annealed 304 stainless steel, American made
  • Laser cut turbo flange matched to the stock Mustang turbo flange
  • Custom laser cut gasket supplied for a leak-free seal at the stock turbo
  • Three O2 bungs: two for the factory O2 sensors and one extra for a wideband sensor
  • Laser cut stainless steel bracket welded to each downpipe to use the stock downpipe support mount
  • Outlet slip joint mates to the stock exhaust or a full 3.00 inch exhaust
  • Stainless steel flex joint
  • High flow catalytic converter with a metallic monolithic honeycomb catalyst
  • Off-road version (no catalytic converter) includes a CP-e Smart O2 Simulator to help prevent a check engine light
  • CP-e satin (Titan) finish, which the manufacturer says strengthens the stainless steel and welds
  • Made in the U.S.A.
  • Lifetime warranty

Mandrel-Bent 304 Stainless Steel Construction

CP-e builds this downpipe from bright annealed 304 stainless steel produced in the United States. The tubing is mandrel bent along its entire length, so it keeps a consistent 3.00 inch diameter through every bend. A stainless steel flex joint is built into the assembly.

At the turbo end, a laser cut flange is shaped to match the factory Mustang turbo flange. CP-e also supplies a custom laser cut gasket to give a leak-free seal at the turbo. For support, CP-e welds a laser cut stainless steel bracket onto each downpipe so it can bolt to the factory downpipe support mount and stay firmly secured.

The downpipe has CP-e's satin finish, which the company also calls its Titan finish. It gives the whole piece an even, clean appearance, and CP-e states that it strengthens both the stainless steel and the welds for added reliability.

Performance and Benefits

The full 3.00 inch diameter and mandrel bends give exhaust gas a smooth path away from the turbocharger, with less turbulence than a design that narrows at the flange. The outlet slip joint connects the 3.00 inch pipe to either the factory exhaust or a full 3.00 inch system, giving a smooth transition to either size.

The catalytic converter uses a metallic monolithic honeycomb catalyst, which CP-e designed for maximum flow and surface area. CP-e notes that the off-road version without a converter ships with its Smart O2 Simulator to help avoid an unwanted check engine light.

The third O2 bung is a convenient place to mount a wideband sensor, so you can monitor air/fuel ratio while tuning without having to weld in a fitting.

Installation

  • Laser cut turbo flange is designed to match the factory Mustang turbo flange
  • Uses the factory downpipe support mount through a welded laser cut stainless steel bracket
  • Accepts both factory O2 sensors, with a third bung available for a wideband sensor
  • Outlet slip joint connects to either the stock exhaust or a full 3.00 inch exhaust
  • Custom laser cut gasket is supplied for sealing to the stock turbo

Why You Need This

  • Full 3.00 inch diameter all the way from the turbo flange, with no neck-down at the flange
  • Works with the factory exhaust now and with a full 3.00 inch system later, so it does not limit future upgrades
  • Retains a catalytic converter using a high flow metallic honeycomb catalyst
  • Built-in wideband O2 bung for monitoring air/fuel ratio during tuning
  • Mounts to factory points, including the stock support mount, and comes with a custom turbo gasket
  • Made in the U.S.A. from 304 stainless steel and covered by a lifetime warranty

Vehicle Fitment

  • 2015-2018 Ford Mustang EcoBoost (2.3L)

What's Included

  • CP-e QKspl 3.00 inch 304 stainless steel downpipe with welded mounting bracket
  • Custom laser cut turbo gasket
  • CP-e Smart O2 Simulator (off-road version without catalytic converter only)

Warranty

Lifetime warranty from CP-e

Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.