This Corsa Performance cat-back exhaust system is a complete 3.0 inch dual-mode setup built for the 2020-2022 Shelby GT500 with the 5.2L engine. It pairs a Corsa Dual Mode axle-back section, finished with twin 4.0 inch polished Pro-Series tips in a dual rear exit layout, with a Double HH pipe intended to add a low, throaty rumble. Corsa Active Valve technology lets the driver move between a quieter, more civil tone and a much louder, more aggressive one.
The system is designed for GT500 owners who want adjustable exhaust volume without the drone that often comes with a louder system. Corsa's patented Reflective Sound Cancellation (RSC) technology targets cabin drone during cruising. The valves retain the factory solenoids so they work with the car's existing valve operating system. The system uses stainless steel, mandrel-bent, straight-through construction and bolts on without welding, which makes it a practical choice for enthusiasts who handle their own installs.
Key Features
- 3.0 inch cat-back exhaust system
- Dual rear exit with twin 4.0 inch polished Pro-Series tips
- Corsa Dual Mode axle-back section with polished tips
- Double HH pipe tuned for a low, throaty rumble
- Variable sound level ranging from Xtreme to Touring
- Corsa Active Valves with an 11 decibel volume difference across driving modes
- Supports a quiet start function
- Patented No-Drone Reflective Sound Cancellation (RSC) technology
- Retains factory solenoids for integration with the vehicle's valve operating system
- Corsa-built valve tested to well over half a million cycles under intense heat cycling with no failures
- Premium stainless steel construction
- Mandrel-bent tubing with a straight-through design
- Bolt-on installation with no welding required
- All hardware and detailed instructions included
- Manufactured in Berea, Ohio
Stainless Steel, Mandrel-Bent Construction with Corsa-Built Active Valves
The system is built from premium stainless steel and uses mandrel-bent tubing. Mandrel bending keeps the pipe diameter consistent through each bend, and the straight-through design avoids restrictive internal baffling along the exhaust path.
Corsa spent more than two years developing its active valve exhaust system. After evaluating a range of off-the-shelf valves, the company designed and built its own. That valve was put through intense heat cycling and logged well over half a million cycles without a failure. The valves keep the factory solenoids in place, so they operate within the vehicle's existing valve control system rather than relying on a separate add-on controller.
Performance and Benefits
The Corsa Active Valves give a wide range of volume control, with an 11 decibel difference between the driving modes. Sound level can be set anywhere from Touring to Xtreme. You can use the quiet start function to keep early-morning startups subdued, or open the system fully when you want the full output. Corsa notes the variable range is especially useful on cars with aggressive engine modifications, where controlling exhaust volume matters more.
Corsa's patented RSC technology works together with the active valves to deliver a cruise free of drone, and Corsa states it does this more effectively than the stock system. The Double HH pipe in this kit is intended to add a deep, throaty rumble to the overall exhaust note.
Installation
- Bolt-on installation; the manufacturer describes it as easy
- No welding needed
- All necessary hardware and detailed instructions are included
- Active valves retain the factory solenoids to work with the vehicle's valve operating system
Why You Need This
- Adjustable volume lets you run the GT500 quietly on a commute or cold start and open it up when you want more sound.
- RSC technology is designed to keep highway cruising free of drone.
- An 11 decibel spread across modes gives real separation between the Touring and Xtreme settings.
- Useful for heavily modified cars where you need some control over exhaust volume.
- Corsa's in-house valve was heat-cycle tested to well over half a million cycles without failure.
- Bolt-on fitment with no welding and the factory solenoids retained keeps the install within reach of a home mechanic.
Vehicle Fitment
- 2020-2022 Ford Mustang GT500 (5.2L)
What's Included
- Corsa Dual Mode axle-back section with polished tips
- Double HH pipe
- All hardware necessary for installation
- Detailed instructions