The Corsa Performance 3-inch Dual Mode cat-back exhaust is a complete system for the 2020-2022 Shelby GT500 and its 5.2L engine. It pairs a Corsa Dual Mode axle-back section with a Double HH pipe and exits through dual rear outlets finished with twin 4.0-inch black Pro-Series tips. The Corsa Active Valves let the driver move between a subdued touring tone and a much louder setting, so the exhaust note can match how the car is being driven.
Corsa built this system around its patented Reflective Sound Cancellation (RSC) technology, which is intended to remove interior drone while cruising, and its in-house active valve, which keeps the factory solenoids in use. The straight-through, mandrel-bent stainless steel construction bolts on without welding. For GT500 owners who want more exhaust presence and still need a calm highway cabin, this cat-back combines adjustable volume with a factory-integrated valve setup.
Key Features
- 3.0-inch cat-back exhaust system
- Dual rear exit with twin 4.0-inch black Pro-Series tips
- Corsa Dual Mode axle-back section paired with a Double HH pipe
- Variable sound level ranging from Xtreme to Touring
- Corsa Active Valves with an 11-decibel volume difference across driving modes
- Quiet start function supported
- Patented No-Drone Reflective Sound Cancellation (RSC) technology
- Corsa active valve retains the factory solenoids for integration with the OEM valve operating system
- Valve tested through intense heat cycling at well over half a million cycles with no failures
- Premium stainless steel construction
- Mandrel-bent, straight-through design
- Bolt-on installation with no welding required
- All hardware and detailed instructions included
- Manufactured in Berea, Ohio
Premium Stainless Steel, Mandrel-Bent Construction
The system is built from premium stainless steel, and its tubing is mandrel bent so the pipe keeps a consistent diameter through every bend. The straight-through layout keeps the exhaust path direct from the cat-back connection to the twin 4.0-inch black Pro-Series tips.
Corsa spent more than two years developing its active valve system. After evaluating a number of off-the-shelf valves, the company designed its own and subjected it to severe heat cycling. The valve completed well over half a million cycles without a failure. The design keeps the factory solenoids in place, so the valves work within the car's existing valve operating system. Corsa manufactures the system in Berea, Ohio.
Performance and Benefits
Sound control is the main advantage of this system. The Corsa Active Valves change volume across the available driving modes by 11 decibels, so the exhaust can run anywhere from Touring to Xtreme. A quiet start function is available for cold starts when a loud exhaust note is not wanted. With the valves fully open, the exhaust is considerably more aggressive.
Corsa states that the active valve, working with its patented RSC technology, delivers a more comfortable, drone-free cruise than the stock system. The Double HH pipe is included to give the exhaust a low, throaty character. Because volume is adjustable, Corsa notes that the system suits cars with aggressive engine modifications, where exhaust volume needs to be kept in check.
Installation
- Bolt-on installation
- No welding required
- Retains the factory valve solenoids
- All necessary hardware and detailed instructions are included
Why You Need This
- Adjustable volume, from Touring to Xtreme, with an 11-decibel range across driving modes
- RSC technology is designed to eliminate drone during highway cruising
- The Corsa active valve uses the factory solenoids, so valve control stays integrated with the car
- The valve design held up through well over half a million heat cycles in Corsa's testing
- Bolt-on installation with no welding and all hardware supplied
- Corsa recommends the system for heavily modified cars that need exhaust volume control
Vehicle Fitment
- 2020-2022 Ford Mustang GT500 (5.2L)
What's Included
- Corsa Dual Mode axle-back section with black tips
- Double HH pipe
- All hardware necessary for installation
- Detailed instructions