This Corsa Performance cat-back exhaust is a complete 3-inch system for the 2020-2022 Shelby GT500 with the 5.2L engine. It combines a Dual Mode axle-back section with Corsa's Double Helix X-pipe and exits through twin 4.0-inch polished Pro-Series tips on each side of the rear. The system uses Corsa Active Valves that work with the car's factory solenoids, so you can move between a quieter Touring character and a much louder Xtreme setting.
The system is built for owners who want more exhaust presence without the cabin drone that often comes with louder aftermarket exhausts. Corsa's patented Reflective Sound Cancellation (RSC) technology targets drone at cruise. The stainless steel construction uses mandrel-bent, straight-through tubing, and the system bolts on without welding. Corsa notes that the adjustable sound level is useful on cars with aggressive engine modifications, where controlling exhaust volume matters more. The system is manufactured in Berea, Ohio.
Key Features
- 3.0-inch cat-back system with dual rear exit
- Twin 4.0-inch polished Pro-Series tips
- Dual Mode operation with variable sound levels from Touring to Xtreme
- Corsa Active Valves produce an 11-decibel difference in volume across driving modes
- Quiet start function available through the active valves
- Retains the factory valve solenoids for integration with the OEM valve operating system
- Patented No-Drone Reflective Sound Cancellation (RSC) technology
- Double Helix X-pipe mid-section
- Premium stainless steel construction
- Mandrel-bent, straight-through design
- Bolt-on installation with no welding required
- Manufactured in Berea, Ohio
Stainless Steel Construction and Tested Active Valves
The system is built from premium stainless steel. Its tubing is mandrel bent and follows a straight-through design, which keeps the pipe diameter consistent through the bends rather than allowing it to crimp.
Corsa spent more than two years developing its active valve exhaust. After evaluating a number of off-the-shelf valves, the company built its own and put it through extensive testing. Under intense heat cycling, the Corsa valve exceeded half a million cycles with no failures. The valve keeps the factory solenoids in place, so it operates within the existing valve control system instead of replacing it.
Performance and Benefits
The Corsa Active Valves give an 11-decibel range in volume between driving modes. You can use the quiet start function for early mornings or open the system fully for maximum sound. Corsa says that the active valves, combined with RSC technology, deliver a more comfortable, drone-free cruise than the stock exhaust.
Corsa states that its Double X-Pipe, Part Number 14327, flows 23.43% more than the stock mid-section and adds sound and performance when paired with an axle-back. Because the variable sound level lets you dial volume down, Corsa recommends this system for builds with aggressive engine modifications that would otherwise be very loud.
Installation
- Bolt-on installation
- No welding needed
- All required hardware is included
- Detailed instructions are included
Why You Need This
- Switch between Touring and Xtreme sound levels to suit the drive, with an 11-decibel spread across modes
- RSC technology is designed to reduce cabin drone at highway cruising speeds
- Quiet start function helps keep cold starts discreet
- Factory solenoids are retained, so the valves work with the OEM valve control system
- The Double X-pipe mid-section outflows the stock mid-section by 23.43%, according to Corsa
- Stainless steel, mandrel-bent construction with active valves tested beyond half a million heat cycles
- Bolts on with no welding, using the included hardware and instructions
Vehicle Fitment
- 2020-2022 Ford Mustang GT500 (5.2L)
What's Included
- Axle-back section with Dual Mode valving and polished tips
- Double Helix X-pipe mid-section
- All installation hardware
- Detailed instructions