{"product_id":"corsa-performance-3-0-dual-rear-exit-xtreme-cat-back-exhaust-system-polished-4-0-slash-cut-tips-2024-2026-mustang-gt-coupe-w-active-exhaust-21259","title":"Corsa Performance 3.0\" Dual Rear Exit Xtreme Cat-Back Exhaust System - Polished 4.0\" Slash Cut Tips (2024-2026 Mustang GT Coupe w\/ Active Exhaust) - 21259","description":"\u003cp\u003eThe Corsa Performance Xtreme Cat-Back Exhaust System, part number 21259, is a 3.0 inch dual rear exit system for the S650 Mustang GT coupe equipped with the factory Active Exhaust. It is built from T304 stainless steel with mandrel-bent tubing and finishes in polished 4.0 inch slash-cut tips. An X-pipe is part of the system and is intended to improve exhaust flow.\u003c\/p\u003e\n\u003cp\u003eCorsa positions the Xtreme as the most aggressive voice in its lineup. It has a deep, throaty tone at idle that builds to a hard-edged roar under throttle, and Corsa engineered it to keep cabin drone in check. It is a bolt-on replacement for the factory cat-back. For owners who want a louder, more assertive exhaust note without living with drone on the highway, this system pairs that sound with durable stainless construction and a clean polished finish at the rear of the car.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorsa Performance Xtreme sound level, the brand's aggressive tone option\u003c\/li\u003e\n\u003cli\u003e3.0 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003ePolished 4.0 inch slash-cut exhaust tips\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eIntegrated X-pipe intended to improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eDesigned to control cabin drone\u003c\/li\u003e\n\u003cli\u003eConfigured for Mustang GT coupe models equipped with Active Exhaust\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 21259\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds the Xtreme cat-back from T304 stainless steel. The material is chosen for its strength and durability in an exhaust application that sees constant heat cycling and road exposure.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which keeps the pipe diameter consistent through each bend. Avoiding the crimped sections common to compression bending supports smooth, unrestricted flow through the 3.0 inch system. The polished 4.0 inch slash-cut tips finish the system with a bright, high-quality appearance at the rear fascia.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Xtreme sound profile starts with a deep, throaty growl at idle. It develops into a much more forceful roar as throttle is applied and becomes loud and commanding at wide-open throttle. It is intended for drivers who want the Coyote V8 to sound noticeably more aggressive than stock.\u003c\/p\u003e\u003cp\u003eCorsa designed this system to keep cabin drone under control. The goal is an aggressive exterior sound without the persistent interior resonance that can make highway driving tiresome.\u003c\/p\u003e\u003cp\u003eThe included X-pipe and mandrel-bent 3.0 inch tubing are intended to improve exhaust flow compared with a more restrictive path. Corsa does not publish specific horsepower or torque figures for this system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation that replaces the factory cat-back section\u003c\/li\u003e\n\u003cli\u003eConfigured for vehicles equipped with the factory Active Exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a substantially more aggressive exhaust note than stock or milder cat-back options\u003c\/li\u003e\n\u003cli\u003eYou want that louder sound with cabin drone kept under control for daily driving\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and mandrel-bent tubing provide durable, flow-friendly construction\u003c\/li\u003e\n\u003cli\u003eThe integrated X-pipe is included as part of the system\u003c\/li\u003e\n\u003cli\u003ePolished 4.0 inch slash-cut tips add a finished look to the rear of the car\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment means no permanent modification is described for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT, Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch dual rear exit cat-back exhaust system\u003c\/li\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003ePolished 4.0 inch slash-cut tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305207394489,"sku":"COR21259","price":2155.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21259_a_lowres.jpg?v=1794377598","url":"https:\/\/engmustangs.com\/products\/corsa-performance-3-0-dual-rear-exit-xtreme-cat-back-exhaust-system-polished-4-0-slash-cut-tips-2024-2026-mustang-gt-coupe-w-active-exhaust-21259","provider":"ENG Mustangs","version":"1.0","type":"link"}