{"product_id":"corsa-performance-21041-3-dual-rear-exit-touring-axle-back-exhaust-system-with-4-polished-tips-2018-2023-ford-mustang-gt","title":"Corsa Performance 21041 3\" Dual Rear Exit Touring Axle-Back Exhaust System with 4\" Polished Tips (2018-2023 Ford Mustang GT)","description":"\u003cp\u003eThe Corsa Performance 21041 is a 3.0 inch axle-back exhaust built for the 2018-2023 Mustang GT with the 5.0L V8 in fastback form. It replaces the factory rear section with a dual rear exit layout finished by twin 4.0 inch polished Pro-Series tips, and it is tuned to Corsa's Touring sound level, the milder of the brand's options. It is designed specifically for GT cars that were not equipped with the factory active valve exhaust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Corsa states gains of +5 horsepower and +4 torque, along with a 45.99 percent increase in airflow, for the 2018-2023 Mustang GT 5.0L V8. Corsa notes that actual performance results are not guaranteed and may vary.\u003c\/p\u003e\n\u003cp\u003eThe goal of this system is a measured step up from stock. It stays quiet at idle, becomes more assertive under acceleration, and uses Corsa's patented RSC Technology to keep drone out of the cabin while cruising. With a bolt-on, no-welding install and a Limited Lifetime warranty, it suits owners who want a richer V8 note and a cleaner rear appearance without turning the car into a daily-driving compromise. The Touring tune also makes it a sensible choice for heavily modified engines where keeping overall volume in check matters.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorsa Performance part number 21041\u003c\/li\u003e\n\u003cli\u003e3.0 inch axle-back exhaust system\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003eTwin 4.0 inch polished Pro-Series tips\u003c\/li\u003e\n\u003cli\u003eTouring sound level: a modest increase in volume over the factory exhaust\u003c\/li\u003e\n\u003cli\u003eQuiet at idle with a more aggressive tone under acceleration and through the gears\u003c\/li\u003e\n\u003cli\u003ePatented RSC Technology engineered to eliminate drone at cruising speeds\u003c\/li\u003e\n\u003cli\u003eBuilt from premium stainless steel\u003c\/li\u003e\n\u003cli\u003eIntended only for Mustang GT models without the factory active valve exhaust\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in Berea, Ohio\u003c\/li\u003e\n\u003cli\u003eBacked by a Corsa Limited Lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePremium Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds its exhaust systems from premium stainless steel, chosen to hold up over time while preserving the system's performance, sound character, and finished appearance. The 21041 is capped with twin 4.0 inch polished Pro-Series tips for a clean, bright look at the rear of the car.\u003c\/p\u003e\u003cp\u003eEach Corsa system is engineered around the specific characteristics of the vehicle it is built for, with the aim of precise fitment and consistent performance. The company designs, engineers, and manufactures its exhaust systems in Berea, Ohio. Corsa does not recommend or support installing its systems on vehicles other than those specified for a given part number.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Touring calibration is the more restrained choice in Corsa's lineup. At idle the car remains quiet, but under acceleration and as you work through the gears the exhaust delivers a noticeably more aggressive voice than the factory system, while overall volume stays only slightly above stock.\u003c\/p\u003e\u003cp\u003eCorsa's patented RSC Technology is what allows the system to sound assertive under load yet remain free of drone at cruise. Corsa tunes each application individually to achieve this drone-free behavior on the highway.\u003c\/p\u003e\u003cp\u003eAccording to Corsa, the 3.0 inch dual rear exit design increases airflow by 45.99 percent compared with the original equipment, contributing to the stated gains of +5 horsepower and +4 torque. Corsa cautions that real-world results are not guaranteed and can vary. The Touring tune is also positioned as a good match for cars with more aggressive engine modifications, where controlling exhaust volume is a priority.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo welding required\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware is supplied with the kit\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a fuller V8 sound under acceleration while keeping volume only slightly above stock\u003c\/li\u003e\n\u003cli\u003eStays quiet at idle, which suits early starts and residential driving\u003c\/li\u003e\n\u003cli\u003eRSC Technology keeps the cabin free of drone during highway cruising\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated gains of +5 horsepower and +4 torque with a 45.99 percent airflow increase\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction for long-term durability and appearance\u003c\/li\u003e\n\u003cli\u003eTwin 4.0 inch polished Pro-Series tips upgrade the look of the rear fascia\u003c\/li\u003e\n\u003cli\u003eStraightforward bolt-on install with no welding, hardware and instructions included\u003c\/li\u003e\n\u003cli\u003eHelps manage exhaust volume on GT builds with more aggressive engine modifications\u003c\/li\u003e\n\u003cli\u003eCovered by a Limited Lifetime warranty for as long as you own the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT (5.0L), Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch dual rear exit axle-back exhaust system with twin 4.0 inch polished Pro-Series tips\u003c\/li\u003e\n\u003cli\u003eAll installation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCorsa Limited Lifetime warranty, valid for as long as you own the vehicle, with proof of purchase required.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68306346082489,"sku":"COR21041","price":1429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21039-2018-2019-ford-mustang-gt-5-0l-v8-3-0-axle-back-exhaust-system-with-twin-4-0-tips-21039-sport-sound-level-axle-back-exhaust-polished-sport-dual-rear-twin-4-0in-11205752389718_8bf17a11-33bc-44d0-b1e1-606b71344790.jpg?v=1794382236","url":"https:\/\/engmustangs.com\/products\/corsa-performance-21041-3-dual-rear-exit-touring-axle-back-exhaust-system-with-4-polished-tips-2018-2023-ford-mustang-gt","provider":"ENG Mustangs","version":"1.0","type":"link"}