Corsa Performance

Corsa 21002 2018-2023 Mustang GT 3" Active Exhaust Axleback System with 4" Quad Polished Tips (Touring/Sport)

$2,065.35 $2,346.99Sale
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The Corsa Performance 3.0 inch Active Exhaust Axle-Back System is a bolt-on rear exhaust for 2018-2023 Mustang GT models equipped with the factory active valve exhaust. It uses a dual rear exit layout finished with 4.0 inch polished Pro-Series tips, 304 stainless steel construction, and Corsa's patented Reflective Sound Cancellation (RSC) technology paired with Corsa-built active valves. Corsa rates the sound level from Touring to Sport: slightly louder than a stock Touring setting, quiet at idle in Touring, and without drone at cruise.

Manufacturer-stated gains: Corsa states gains of +5 horsepower and +4 torque (torque units not specified). The manufacturer notes that actual performance results are not guaranteed and may vary.

This system suits Coyote-powered GT owners who want a broader volume range and better flow while keeping highway cruising comfortable and the quiet start function intact. The Corsa valves work with the factory solenoids, so the car's valve control keeps working as designed. Corsa notes the system is a good match for aggressively modified engines where exhaust volume needs to stay under control. It is designed, engineered, and manufactured in Berea, Ohio.

Key Features

  • 3.0 inch axle-back design with dual rear exit
  • Twin 4.0 inch polished Pro-Series tips with dual-wall stainless steel construction
  • 304 stainless steel construction
  • Patented Reflective Sound Cancellation (RSC) technology for drone-free cruising
  • Corsa active valves that use the factory solenoids
  • Retains the factory quiet start function
  • Touring to Sport sound level: slightly louder than stock Touring and quiet at idle in Touring
  • 11 decibel volume change across the various driving modes
  • Corsa states flow improves 28 percent over stock with the valves closed and 17 percent with the valves open
  • Requires the factory active valve exhaust
  • Bolt-on installation with no welding required
  • Made in the U.S.A. in Berea, Ohio

304 Stainless Steel Construction with Corsa-Built Active Valves

The system is built from 304 stainless steel, which Corsa uses across its exhaust lineup for long-term durability, sound, and appearance. The 4.0 inch Pro-Series tips are dual-walled and polished stainless steel.

Corsa spent more than two years developing its active valve system. After testing several off-the-shelf valves, the company built its own valve and put it through severe heat-cycling tests. Corsa reports no failures at well over half a million cycles. Each Corsa system is engineered for its specific vehicle to achieve proper fitment and performance.

Performance and Benefits

Corsa's RSC technology is meant to deliver an aggressive tone under acceleration and remove drone while cruising. Combined with the Corsa active valves, Corsa says the system manages cruise drone better than the stock exhaust. You can use the quiet start function for cold starts or run the valves fully open, and the system produces an 11 decibel difference in volume across the driving modes.

Corsa rates the system from Touring to Sport. It is slightly louder than the stock Touring setting, stays quiet at idle in Touring, and does not drone during cruise. Corsa lists flow gains of 28 percent over stock with the valves closed and 17 percent with the valves open.

For more sound and performance, Corsa suggests pairing this axle-back with the Corsa Double X-Pipe, part number 14327. Corsa states that the X-pipe outflows the stock mid-section by 23.43 percent.

Installation

  • Bolt-on installation
  • No welding required
  • All hardware is included
  • Detailed printed instructions are included, and full-color instructions are available online
  • Requires a vehicle with the factory active valve exhaust
  • Corsa does not recommend or recognize installation on vehicles the system was not designed for

Why You Need This

  • Adds an 11 decibel volume range across driving modes while keeping the quiet start function
  • RSC technology is designed to eliminate drone at cruise, which helps on long drives
  • Works with the factory valve solenoids, so the stock valve control stays functional
  • Stays at a moderate Touring to Sport level, which suits heavily modified engines where volume needs to be controlled
  • Built from 304 stainless steel with Corsa-developed valves that were tested beyond half a million heat cycles
  • Bolt-on installation with no welding and all hardware included

Vehicle Fitment

  • 2018-2023 Ford Mustang GT (5.0L), Fastback

What's Included

  • Axle-back exhaust system with active valves
  • 4.0 inch polished Pro-Series tips
  • All mounting hardware
  • Detailed printed installation instructions

Warranty

Limited Lifetime warranty on the exhaust for as long as you own the vehicle, with proof of purchase. The valves are covered for 5 years.

Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.