{"product_id":"borla-cat-back-exhaust-system-atak-stainless-steel-quad-tips-2024-2026-mustang-w-non-active-exhaust-140970","title":"Borla Cat-Back Exhaust System - ATAK - Stainless Steel Quad Tips (2024-2026 Mustang w\/ Non Active Exhaust) - 140970","description":"\u003cp\u003eThe Borla ATAK Cat-Back Exhaust System, part number 140970, is a T304 stainless steel cat-back built for the 2024 Mustang equipped with the non-active (non-valved) exhaust. It uses 2.75-inch mandrel-bent tubing, an integrated X-pipe, and four 4-inch polished tips. The ATAK line is Borla's most aggressive sound level, and this system is tuned for that character.\u003c\/p\u003e\n\u003cp\u003eThis system suits owners of non-active-exhaust Mustangs who want a much bolder exhaust note than the factory system without adding a valved setup. It installs as a bolt-on, uses corrosion-resistant stainless construction throughout, and Borla says it is engineered to keep cabin drone under control. That makes it a practical choice for a car that is driven regularly but is meant to sound purposeful.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK cat-back exhaust system, part number 140970\u003c\/li\u003e\n\u003cli\u003eDesigned for 2024 Mustang models with the non-active exhaust\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.75-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smoother exhaust flow\u003c\/li\u003e\n\u003cli\u003eX-pipe included\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch exhaust tips\u003c\/li\u003e\n\u003cli\u003ePolished tip finish\u003c\/li\u003e\n\u003cli\u003eAggressive ATAK sound profile that builds from idle to wide-open throttle\u003c\/li\u003e\n\u003cli\u003eBorla states the system is engineered to avoid cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds the ATAK 140970 from T304 stainless steel, an alloy chosen for its resistance to corrosion and its long service life in exhaust applications. The system is made for owners who want a cat-back they will not need to replace because of rust or surface deterioration.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, so the 2.75-inch pipe keeps a consistent diameter through each bend instead of narrowing as crush-bent tubing can. The four 4-inch tips have a polished finish to complement the stainless construction and give the rear of the car a finished look.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe ATAK sound level is Borla's most aggressive. At idle the system produces a deep, authoritative tone. The volume and intensity climb as throttle is applied and peak in a loud, hard-edged roar at wide-open throttle. It is aimed at drivers who want an obvious change from the stock exhaust note.\u003c\/p\u003e\u003cp\u003eBorla says the system is engineered so the aggressive exterior sound does not bring unwanted drone into the cabin, which helps on longer drives. The mandrel-bent 2.75-inch tubing and the included X-pipe are designed to improve exhaust flow compared with restrictive designs. The X-pipe balances flow between the two banks.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eDesigned for 2024 Mustang models with the non-active exhaust; confirm your vehicle does not have the factory active exhaust before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelivers Borla's most aggressive ATAK sound level on a Mustang that came without the active exhaust\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction for corrosion resistance and longevity\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.75-inch tubing and an X-pipe for improved exhaust flow\u003c\/li\u003e\n\u003cli\u003eEngineered by Borla to limit cabin drone, so the car stays comfortable to drive\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch polished tips give the rear of the car a cleaner, more finished appearance\u003c\/li\u003e\n\u003cli\u003eBolt-on design for owners who handle their own upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system\u003c\/li\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch polished exhaust tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68306131222713,"sku":"BOR140970","price":1976.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140970-main-1-xlarge.jpg?v=1794430428","url":"https:\/\/engmustangs.com\/products\/borla-cat-back-exhaust-system-atak-stainless-steel-quad-tips-2024-2026-mustang-w-non-active-exhaust-140970","provider":"ENG Mustangs","version":"1.0","type":"link"}