{"product_id":"borla-cat-back-exhaust-system-atak-stainless-steel-quad-tips-2024-2026-mustang-w-active-exhaust-140963","title":"Borla Cat-Back Exhaust System - ATAK - Stainless Steel Quad Tips (2024-2026 Mustang w\/ Active Exhaust) - 140963","description":"\u003cp\u003eThe Borla ATAK cat-back exhaust system, part number 140963, is a complete replacement exhaust for the latest-generation Ford Mustang equipped with the factory active exhaust. It is built from T304 stainless steel using 2.75-inch mandrel-bent tubing, includes an X-pipe, and finishes with four polished 4-inch tips. Borla positions the ATAK as its aggressive-sounding option, delivering a deep tone at startup that builds to a much louder note under throttle.\u003c\/p\u003e\n\u003cp\u003eFor owners of current Mustangs with active exhaust who want a more assertive exhaust note without permanent changes to the car, this system bolts in place of the factory cat-back with no cutting or welding. Borla also states that the system is engineered to control cabin drone, so the added volume is meant to stay outside the car during steady cruising. The combination of stainless construction, X-pipe routing, and a polished quad-tip finish makes it a direct upgrade in both sound and appearance.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system designed for Mustangs equipped with active exhaust\u003c\/li\u003e\n\u003cli\u003eATAK sound profile with a deep, aggressive tone that intensifies under acceleration\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.75-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing to support exhaust flow\u003c\/li\u003e\n\u003cli\u003eX-pipe included\u003c\/li\u003e\n\u003cli\u003eQuad exhaust tips, 4 inches each, with a polished finish\u003c\/li\u003e\n\u003cli\u003eBolt-on design with no cutting or welding required\u003c\/li\u003e\n\u003cli\u003eEngineered by Borla to minimize cabin drone\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 140963\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds the ATAK system from T304 stainless steel, a material chosen for its corrosion resistance and ability to hold its appearance over time. This helps the system stand up to road exposure and weather while keeping its finish.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which keeps the pipe diameter consistent through each bend rather than allowing it to crimp or narrow. With a 2.75-inch pipe diameter throughout, this approach supports smooth exhaust flow from the catalytic converters back to the tips.\u003c\/p\u003e\u003cp\u003eAt the rear, the system terminates in four polished 4-inch tips that give the back of the car a more aggressive, finished look.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe ATAK sound character starts with a deep, aggressive rumble at startup and climbs to a much louder roar as engine speed rises. It is aimed at drivers who want the car to sound noticeably more present than stock.\u003c\/p\u003e\u003cp\u003eBorla states that the system is engineered to manage drone, keeping cabin noise under control so conversation and audio remain comfortable during normal driving even with the aggressive exterior sound.\u003c\/p\u003e\u003cp\u003eThe included X-pipe and mandrel-bent tubing are intended to improve exhaust flow compared to a restrictive layout. Borla does not publish specific horsepower or torque figures for this system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required\u003c\/li\u003e\n\u003cli\u003eDesigned to fit vehicles equipped with the factory active exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a noticeably more aggressive exhaust note than the factory system produces\u003c\/li\u003e\n\u003cli\u003eYou want added volume while keeping cabin drone in check on the highway\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction resists corrosion and holds its appearance\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.75-inch tubing and an included X-pipe support efficient exhaust flow\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment means no cutting or welding, so the install is reversible\u003c\/li\u003e\n\u003cli\u003ePolished 4-inch quad tips upgrade the rear appearance of the car\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eFour polished 4-inch exhaust tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68306131189945,"sku":"BOR140963","price":2479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140963-main-1-xlarge.jpg?v=1794430428","url":"https:\/\/engmustangs.com\/products\/borla-cat-back-exhaust-system-atak-stainless-steel-quad-tips-2024-2026-mustang-w-active-exhaust-140963","provider":"ENG Mustangs","version":"1.0","type":"link"}