{"product_id":"borla-cat-back-exhaust-system-atak-stainless-steel-dual-tips-2024-2026-mustang-w-non-active-exhaust-140961","title":"Borla Cat-Back Exhaust System -ATAK - Stainless Steel Dual Tips (2024-2026 Mustang w\/ Non Active Exhaust) - 140961","description":"\u003cp\u003eThe Borla ATAK cat-back exhaust system, part number 140961, is a bolt-on replacement for the factory exhaust from the catalytic converters back on late-model S650 Mustangs equipped with the non-active (non-valved) exhaust. It is built from T304 stainless steel with 2.75-inch mandrel-bent tubing, an X-pipe, and dual 4-inch polished stainless tips.\u003c\/p\u003e\n\u003cp\u003eATAK is Borla's most aggressive sound level. This system suits owners who want a deep tone at idle and a strong, loud note under throttle, along with improved flow over the stock exhaust. Borla says the system is engineered to keep drone out of the cabin. The stainless construction resists corrosion for long-term ownership, and the bolt-on design lets the system go on without permanent changes to the car.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK cat-back exhaust system, part number 140961\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustangs with non-active (non-valved) exhaust\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.75-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eX-pipe included for flow optimization\u003c\/li\u003e\n\u003cli\u003eDual 4-inch tips\u003c\/li\u003e\n\u003cli\u003ePolished finish\u003c\/li\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003cli\u003eEngineered to limit cabin drone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds the ATAK system from T304 stainless steel, chosen for strength and corrosion resistance. That makes it a durable, long-term upgrade for a car that sees regular use.\u003c\/p\u003e\u003cp\u003eThe 2.75-inch tubing is mandrel-bent. This keeps the pipe diameter consistent through each bend, so exhaust gases move through the system smoothly. The dual 4-inch tips are also polished stainless steel, giving the rear of the car a clean, finished look that matches the rest of the system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe ATAK sound profile is aggressive from startup. At idle it produces a deep, throaty tone, and under acceleration it builds into a loud, pronounced roar.\u003c\/p\u003e\u003cp\u003eBorla states that the system is engineered to keep drone out of the cabin. The goal is aggressive exterior sound without excessive noise inside the car at cruise.\u003c\/p\u003e\u003cp\u003eThe included X-pipe and mandrel-bent 2.75-inch tubing are intended to optimize exhaust flow through the system. Borla does not publish specific horsepower or torque figures for this part.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003cli\u003eIntended for vehicles with the non-active (non-valved) factory exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelivers Borla's most aggressive ATAK sound level for owners who want a loud, deep exhaust note\u003c\/li\u003e\n\u003cli\u003eEngineered to limit cabin drone, which helps on longer drives\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction resists corrosion\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.75-inch tubing and an X-pipe improve flow compared with restrictive bends\u003c\/li\u003e\n\u003cli\u003eDual 4-inch polished stainless tips give the rear of the car a clean, upgraded look\u003c\/li\u003e\n\u003cli\u003eBolt-on design works for owners who handle their own installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eDual 4-inch polished stainless steel tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305991499961,"sku":"BOR140961","price":1724.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140961-main-1-xlarge.jpg?v=1794430411","url":"https:\/\/engmustangs.com\/products\/borla-cat-back-exhaust-system-atak-stainless-steel-dual-tips-2024-2026-mustang-w-non-active-exhaust-140961","provider":"ENG Mustangs","version":"1.0","type":"link"}