The Borla ATAK cat-back exhaust system, part number 140963CFBA, is built for the current-generation Ford Mustang equipped with the factory active exhaust. It runs 2.75-inch mandrel-bent T304 stainless steel tubing, includes an X-pipe, and finishes with four 4-inch carbon fiber tips. Borla describes the ATAK sound as a deep, aggressive growl at idle that builds into a ferocious roar at wide-open throttle.
The system targets owners who want a much more assertive exhaust note than stock without putting up with cabin drone on the highway. Borla states the system is designed to eliminate drone, and its bolt-on design suits enthusiasts who handle their own installs. The stainless construction and carbon fiber tips address long-term durability and appearance.
Key Features
- Borla ATAK cat-back exhaust system, part number 140963CFBA
- Designed for Mustang models equipped with the factory active exhaust
- 2.75-inch pipe diameter
- T304 stainless steel construction
- Mandrel-bent tubing for optimized exhaust flow
- X-pipe included
- Quad 4-inch tips with a carbon fiber finish
- Tips rated by the manufacturer to withstand high temperatures and resist corrosion
- Aggressive sound profile: deep growl at idle that builds to a roar at wide-open throttle
- Engineered by Borla to eliminate cabin drone
- Bolt-on design
Mandrel-Bent T304 Stainless Steel Construction
Borla builds this cat-back from T304 stainless steel, chosen for its strength and durability in an exhaust application. The tubing is mandrel-bent, which keeps the 2.75-inch diameter consistent through each bend rather than crimping it. That preserves flow through the system.
The system ends in four 4-inch tips with a carbon fiber finish. According to Borla, the tips are made to hold up to high temperatures and resist corrosion, so they keep their appearance as well as their function over time.
Performance and Benefits
The ATAK sound profile is Borla's aggressive option. At idle the system produces a deep growl, and the volume and intensity build as you open the throttle until it reaches a full roar at wide-open throttle. This tuning is meant for drivers who want the car to sound noticeably more aggressive.
Even with that much volume available, Borla says the system is designed to eliminate cabin drone. That makes it more livable during steady-state cruising while keeping the aggressive character under acceleration.
The included X-pipe and mandrel-bent 2.75-inch tubing are intended to improve exhaust flow compared with a restrictive layout. Borla references performance gains but does not publish specific horsepower or torque figures for this system.
Installation
- Bolt-on design, according to the manufacturer
- Intended for vehicles equipped with the factory active exhaust
Why You Need This
- You want a substantially more aggressive exhaust note than stock, from idle through wide-open throttle
- Your Mustang has the factory active exhaust, which this system is designed to work with
- You want to reduce the risk of cabin drone on long drives, which Borla says this system is engineered to eliminate
- You want durable T304 stainless steel with mandrel-bent tubing
- You want an included X-pipe as part of the cat-back
- You want the look of four 4-inch carbon fiber tips
- You want a bolt-on system you can install yourself
Vehicle Fitment
What's Included