{"product_id":"bbk-short-mid-h-pipe-w-convertors-for-use-w-1642-16420-2015-2017-mustang-v6-1465","title":"BBK Short Mid H Pipe W\/ Convertors For Use W\/ 1642\/16420 (2015-2017 Mustang V6) - 1465","description":"\u003cp\u003eThe BBK Performance Parts 1465 is a short mid H-pipe with catalytic converters, built to connect BBK CNC series long tube headers to the rest of the exhaust on 2015-2017 Mustang models with the 3.7L V6. Long tube headers relocate the collector outlets, so the factory mid-pipe will not line up. This H-pipe fills that gap and uses a merged step-down section to mate with the factory exhaust system downstream.\u003c\/p\u003e\n\u003cp\u003eThe pipe is made from CNC mandrel-bent 2.5-inch tubing. BBK pairs it specifically with its full-length long tube headers, part numbers 1642 and 16420, and it works with either the factory catback or an aftermarket catback. For V6 owners who have chosen or are planning a BBK long tube header install, this is the matching piece that completes the system. BBK says it is intended to improve performance and give a more aggressive exhaust note than stock, and it is designed and manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShort mid H-pipe configuration with catalytic converters\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent 2.5-inch tubing\u003c\/li\u003e\n\u003cli\u003eMerged step-down design for connection to the factory exhaust system\u003c\/li\u003e\n\u003cli\u003eDesigned for use with BBK long tube full-length headers, part numbers 1642 and 16420\u003c\/li\u003e\n\u003cli\u003eCompatible with the factory catback or aftermarket catback exhaust systems\u003c\/li\u003e\n\u003cli\u003eIntended to increase performance and produce a more aggressive sound than stock\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA by BBK Performance Parts\u003c\/li\u003e\n\u003cli\u003eNot CARB emissions certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCNC Mandrel-Bent 2.5-Inch Tubing\u003c\/h3\u003e\u003cp\u003eBBK forms this H-pipe from 2.5-inch tubing bent on CNC mandrel equipment. Mandrel bending keeps the tube's inside diameter consistent through each bend instead of letting it crimp or flatten. That supports exhaust flow, horsepower, and torque. CNC control of the bending process gives repeatable bend geometry from one pipe to the next.\u003c\/p\u003e\u003cp\u003eA merged step-down section transitions from the H-pipe to the factory exhaust connection, so the pipe ties into the stock system without custom fabrication. BBK designs and manufactures the part in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBecause the tubing is mandrel bent at a consistent 2.5-inch diameter, exhaust gases move through the bends without the restriction of crushed or narrowed sections. BBK states this tubing is intended to maximize exhaust flow, horsepower, and torque.\u003c\/p\u003e\u003cp\u003eBBK also designed the pipe to give the 3.7L V6 a more aggressive sound than the factory exhaust. It is intended to work as part of a complete BBK long tube header setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned specifically to connect BBK long tube headers, part numbers 1642 and 16420, to the factory exhaust system\u003c\/li\u003e\n\u003cli\u003eMerged step-down design allows connection to the factory exhaust system\u003c\/li\u003e\n\u003cli\u003eRetains compatibility with the stock catback or an aftermarket catback exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers require a matching mid-pipe, and this H-pipe is engineered specifically for BBK headers 1642 and 16420 on the 3.7L V6\u003c\/li\u003e\n\u003cli\u003eIt retains catalytic converters, unlike off-road-only mid-pipe versions\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent 2.5-inch tubing maintains consistent diameter through every bend for better flow\u003c\/li\u003e\n\u003cli\u003eWorks with the factory catback, so it can be added without replacing the rest of the exhaust\u003c\/li\u003e\n\u003cli\u003eDelivers a more aggressive exhaust note than the stock system, per BBK\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang V6\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eShort mid H-pipe with catalytic converters\u003c\/li\u003e\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68306135318713,"sku":"BBK1465","price":619.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/bbk-performance-performance-exhaust-default-title-ford-mustang-v6-high-flow-catted-short-mid-h-pipe-for-long-tubes-15-17-26999110992051.jpg?v=1794430601","url":"https:\/\/engmustangs.com\/products\/bbk-short-mid-h-pipe-w-convertors-for-use-w-1642-16420-2015-2017-mustang-v6-1465","provider":"ENG Mustangs","version":"1.0","type":"link"}