{"product_id":"bbk-1-3-4-tuned-length-shorty-headers-ceramic-2015-2017-mustang-gt-18480","title":"BBK 1-3\/4 Tuned Length Shorty Headers (Ceramic) (2015-2017 Mustang GT) - 18480","description":"\u003cp\u003eThe BBK Performance 18480 is a set of 1-3\/4 inch tuned length shorty headers with a ceramic finish, built as a replacement for the factory exhaust manifolds on the Coyote 5.0L S550 Mustang GT. BBK's R\u0026amp;D department developed this header with a single goal: extracting more horsepower and torque from the Coyote-powered Mustang GT. The design keeps the factory OEM catalytic converters in the system, so the header swaps in ahead of the stock converters rather than replacing them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e BBK reports that initial testing has shown gains of around 14 horsepower with this bolt-on header. No torque figure or specific test conditions are stated.\u003c\/p\u003e\n\u003cp\u003eEach primary is formed from 1-3\/4 inch CNC mandrel-bent tubing to improve exhaust flow compared with the stock headers, and the tubes terminate in solid 3\/8 inch laser-cut flanges intended to resist heat distortion. For owners of 2015-2017 Mustang GT models who want a bolt-on header upgrade that retains the original converters, this BBK kit pairs a flow-focused tube design with the hardware, gaskets, and instructions needed for installation, and it is designed and manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBBK Performance part number 18480\u003c\/li\u003e\n\u003cli\u003e1-3\/4 inch tuned length shorty header design\u003c\/li\u003e\n\u003cli\u003e1-3\/4 inch CNC mandrel-bent tubing for improved exhaust flow over stock\u003c\/li\u003e\n\u003cli\u003eSolid 3\/8 inch laser-cut exhaust flanges designed to prevent heat distortion\u003c\/li\u003e\n\u003cli\u003ePolished silver ceramic finish (the design is also offered in chrome under a separate listing)\u003c\/li\u003e\n\u003cli\u003eRetains the factory OEM catalytic converters\u003c\/li\u003e\n\u003cli\u003eDriver side factory converter is transferred to the new BBK driver side header flange by cutting and welding\u003c\/li\u003e\n\u003cli\u003eKit includes required hardware, gaskets, and detailed instructions\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCNC Mandrel-Bent Tubing with 3\/8 Inch Laser-Cut Flanges\u003c\/h3\u003e\u003cp\u003eBBK builds the 18480 around 1-3\/4 inch tubing that is CNC mandrel bent. Mandrel bending maintains a consistent tube diameter through each bend, which supports the improved exhaust flow BBK designed this header to deliver over the factory parts.\u003c\/p\u003e\u003cp\u003eAt the cylinder head, the header uses solid 3\/8 inch flanges that are laser cut. BBK specifies this thickness to keep the flanges from distorting under heat, a key factor in maintaining a good seal at the head over repeated heat cycles. This version is finished in a polished silver ceramic coating.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe tuned length primaries and 1-3\/4 inch mandrel-bent tubing are intended to move exhaust out of the Coyote 5.0L more efficiently than the stock headers, with BBK citing roughly 14 horsepower in initial testing. Because the design reuses the factory catalytic converters, the upgrade focuses on the header section of the exhaust while the rest of the stock converter arrangement stays in place.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe factory driver side catalytic converter must be cut from the factory header and welded to the new BBK driver side header flange\u003c\/li\u003e\n\u003cli\u003eDetailed instructions covering the driver side converter transfer are included with the kit\u003c\/li\u003e\n\u003cli\u003eBBK references a detailed video and how-to for the converter transfer procedure\u003c\/li\u003e\n\u003cli\u003eThe passenger side reuses the factory catalytic converter as part of the direct fit design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a header upgrade for a Coyote 5.0L Mustang GT that BBK reports produced around 14 horsepower in initial testing\u003c\/li\u003e\n\u003cli\u003eYou prefer to keep the factory OEM catalytic converters rather than replace them\u003c\/li\u003e\n\u003cli\u003eYou want 1-3\/4 inch CNC mandrel-bent tubing for improved flow over the stock headers\u003c\/li\u003e\n\u003cli\u003eYou value thick 3\/8 inch laser-cut flanges designed to resist heat distortion\u003c\/li\u003e\n\u003cli\u003eYou want a kit that arrives with the required hardware, gaskets, and detailed instructions\u003c\/li\u003e\n\u003cli\u003eYou are comfortable with, or have access to, the cutting and welding needed to transfer the driver side converter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBBK 1-3\/4 inch tuned length shorty headers (ceramic finish)\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003cli\u003eDetailed instructions for re-installing the factory driver side catalytic converter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68306133418169,"sku":"BBK18480","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/18480_1.jpg?v=1794430601","url":"https:\/\/engmustangs.com\/products\/bbk-1-3-4-tuned-length-shorty-headers-ceramic-2015-2017-mustang-gt-18480","provider":"ENG Mustangs","version":"1.0","type":"link"}