The BBK Performance 18480 is a set of 1-3/4 inch tuned length shorty headers with a ceramic finish, built as a replacement for the factory exhaust manifolds on the Coyote 5.0L S550 Mustang GT. BBK's R&D department developed this header with a single goal: extracting more horsepower and torque from the Coyote-powered Mustang GT. The design keeps the factory OEM catalytic converters in the system, so the header swaps in ahead of the stock converters rather than replacing them.
Manufacturer-stated gains: BBK reports that initial testing has shown gains of around 14 horsepower with this bolt-on header. No torque figure or specific test conditions are stated.
Each primary is formed from 1-3/4 inch CNC mandrel-bent tubing to improve exhaust flow compared with the stock headers, and the tubes terminate in solid 3/8 inch laser-cut flanges intended to resist heat distortion. For owners of 2015-2017 Mustang GT models who want a bolt-on header upgrade that retains the original converters, this BBK kit pairs a flow-focused tube design with the hardware, gaskets, and instructions needed for installation, and it is designed and manufactured in the USA.
Key Features
- BBK Performance part number 18480
- 1-3/4 inch tuned length shorty header design
- 1-3/4 inch CNC mandrel-bent tubing for improved exhaust flow over stock
- Solid 3/8 inch laser-cut exhaust flanges designed to prevent heat distortion
- Polished silver ceramic finish (the design is also offered in chrome under a separate listing)
- Retains the factory OEM catalytic converters
- Driver side factory converter is transferred to the new BBK driver side header flange by cutting and welding
- Kit includes required hardware, gaskets, and detailed instructions
- Designed and manufactured in the USA
CNC Mandrel-Bent Tubing with 3/8 Inch Laser-Cut Flanges
BBK builds the 18480 around 1-3/4 inch tubing that is CNC mandrel bent. Mandrel bending maintains a consistent tube diameter through each bend, which supports the improved exhaust flow BBK designed this header to deliver over the factory parts.
At the cylinder head, the header uses solid 3/8 inch flanges that are laser cut. BBK specifies this thickness to keep the flanges from distorting under heat, a key factor in maintaining a good seal at the head over repeated heat cycles. This version is finished in a polished silver ceramic coating.
Performance and Benefits
The tuned length primaries and 1-3/4 inch mandrel-bent tubing are intended to move exhaust out of the Coyote 5.0L more efficiently than the stock headers, with BBK citing roughly 14 horsepower in initial testing. Because the design reuses the factory catalytic converters, the upgrade focuses on the header section of the exhaust while the rest of the stock converter arrangement stays in place.
Installation
- The factory driver side catalytic converter must be cut from the factory header and welded to the new BBK driver side header flange
- Detailed instructions covering the driver side converter transfer are included with the kit
- BBK references a detailed video and how-to for the converter transfer procedure
- The passenger side reuses the factory catalytic converter as part of the direct fit design
Why You Need This
- You want a header upgrade for a Coyote 5.0L Mustang GT that BBK reports produced around 14 horsepower in initial testing
- You prefer to keep the factory OEM catalytic converters rather than replace them
- You want 1-3/4 inch CNC mandrel-bent tubing for improved flow over the stock headers
- You value thick 3/8 inch laser-cut flanges designed to resist heat distortion
- You want a kit that arrives with the required hardware, gaskets, and detailed instructions
- You are comfortable with, or have access to, the cutting and welding needed to transfer the driver side converter
Vehicle Fitment
- 2015-2017 Ford Mustang GT (5.0L)
What's Included
- BBK 1-3/4 inch tuned length shorty headers (ceramic finish)
- All required hardware
- Gaskets
- Detailed instructions for re-installing the factory driver side catalytic converter