BBK

BBK 1-3/4 Long Tube Headers (Titanium Ceramic) (2011-2017 Mustang V6) - 1642

$649.99
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The BBK 1642 is a set of full-length long tube headers for the 3.7L V6 Mustang, built with 1-3/4 inch CNC mandrel-bent primary tubing and solid 3/8 inch laser-cut exhaust flanges. The title lists a titanium ceramic finish. BBK's research and development team designed these headers to extract more horsepower and torque from the V6 platform, replacing the factory exhaust manifolds with a long tube design.

Manufacturer-stated gains: BBK reports gains of around 10+ horsepower and 5 ft-lbs of torque from initial testing on a V6 Mustang with a 6-speed manual transmission, run with a high flow catted X pipe.

These headers are intended for V6 Mustang owners building a more capable exhaust system from the engine back. BBK includes new gaskets, the required hardware, and detailed instructions. The headers are designed to be paired with one of BBK's short mid X or H pipes to finish the installation. Owners of 2015-2017 models will also need BBK's front O2 sensor wire harness extensions, which are sold separately.

Key Features

  • 1-3/4 inch primary tubing
  • CNC mandrel-bent tube construction
  • Solid 3/8 inch laser-cut exhaust flanges
  • Full-length long tube header design for the 3.7L V6 Mustang
  • Titanium ceramic finish, as listed in the product title
  • Includes new gaskets, required hardware, and detailed installation instructions
  • Designed to pair with BBK short mid X pipes (2011-2014) or short mid H pipes (2015-2017)
  • BBK part number 1642

CNC Mandrel-Bent Tubing and 3/8-Inch Laser-Cut Flanges

BBK forms the 1-3/4 inch primary tubes on CNC mandrel-bending equipment. This process produces repeatable bends and is part of the rugged design BBK describes for this header.

The exhaust flanges are cut from solid 3/8 inch material using a laser. This gives the headers a thick, precisely shaped mounting surface where they bolt to the cylinder heads.

Performance and Benefits

BBK built these long tube headers specifically to increase horsepower and torque on the V6 Mustang. In initial testing on a 6-speed manual car with a high flow catted X pipe, BBK measured roughly 10+ horsepower and 5 ft-lbs of torque.

Because long tube headers move the catalytic converters and O2 sensors farther back in the exhaust, some vehicles may set a check engine light when these headers are run with high flow mid pipes. BBK explains that the factory computer monitors converter temperature, and the relocated converter takes longer to heat up. According to BBK, this is not a physical fault with the headers, converters, or O2 sensors, and it does not cause a drivability problem. A vehicle tune can eliminate the check engine light.

Installation

  • Detailed installation instructions, new gaskets, and the required hardware are included.
  • A BBK short mid pipe is needed to complete the installation.
  • For 2011-2014 models: Part# 1461, 2-3/4 inch Short Mid X Pipe with converters, or Part# 1462, 2-3/4 inch Short Mid X Pipe Off Road.
  • For 2015-2017 models: Part# 1465, 2-1/2 inch Short Mid H Pipe with converters, or Part# 14650, 2-1/2 inch Short Mid H Pipe Off Road.
  • All 2015-2017 Mustang V6 installations require front O2 sensor wire harness extensions, BBK Part# 1119, purchased separately.
  • A check engine light may appear with long tube headers and high flow mid pipes. BBK states that a vehicle tune can eliminate it.

Why You Need This

  • Replaces the factory exhaust manifolds with a long tube design that BBK developed specifically to add power on the 3.7L V6 Mustang.
  • BBK's own testing showed around 10+ horsepower and 5 ft-lbs of torque with a high flow catted X pipe.
  • 1-3/4 inch CNC mandrel-bent tubing and solid 3/8 inch laser-cut flanges give the headers a robust build.
  • Gaskets, hardware, and instructions come in the box, so you do not have to source them separately.
  • BBK offers matching short mid X and H pipes, with or without converters, to build a complete system.

Vehicle Fitment

  • 2011-2017 Ford Mustang V6 (3.7L)
  • 2015-2017 Ford Mustang V6

What's Included

  • Long tube headers (pair)
  • New gaskets
  • Required hardware
  • Detailed installation instructions

Not included:

  • Front O2 sensor wire harness extensions, BBK Part# 1119, required for all 2015-2017 Mustang V6 installations
  • Short mid X pipe or H pipe needed to complete the installation (BBK Part# 1461, 1462, 1465, or 14650 depending on model year)
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.