{"product_id":"bbk-1-3-4-long-tube-headers-ceramic-2011-2017-mustang-v6-16420","title":"BBK 1-3\/4 Long Tube Headers- (Ceramic) (2011-2017 Mustang V6) - 16420","description":"\u003cp\u003eBBK Performance Parts 16420 is a set of full-length long tube headers for the 2011-2017 Ford Mustang with the 3.7L V6. BBK's research and development team engineered them to extract more horsepower and torque from the V6. They use 1-3\/4 inch CNC mandrel-bent primary tubes and solid 3\/8 inch laser-cut flanges, and the product title designates a ceramic finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e In BBK's initial testing on a 6-speed manual transmission V6 Mustang, these headers showed gains of around 10+ horsepower and 5 ft-lbs of torque when paired with a high flow catted X pipe.\u003c\/p\u003e\n\u003cp\u003eThese headers suit V6 owners who want to go beyond what a cat-back or axle-back system can deliver. BBK's initial testing showed measurable gains in both horsepower and torque. The headers are designed to pair with BBK's short mid X pipes for 2011-2014 cars or short mid H pipes for 2015-2017 cars, which together form a complete header-back upgrade.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull-length long tube header design for the 2011-2017 Mustang 3.7L V6\u003c\/li\u003e\n\u003cli\u003e1-3\/4 inch CNC mandrel-bent primary tubing\u003c\/li\u003e\n\u003cli\u003eSolid 3\/8 inch laser-cut exhaust flanges\u003c\/li\u003e\n\u003cli\u003eCeramic finish, as designated in the product title\u003c\/li\u003e\n\u003cli\u003eDeveloped by BBK's R\u0026amp;D department to increase horsepower and torque\u003c\/li\u003e\n\u003cli\u003ePairs with BBK short mid X pipes (2011-2014) or short mid H pipes (2015-2017), sold separately\u003c\/li\u003e\n\u003cli\u003eSupplied with new gaskets, required hardware, and detailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCNC Mandrel-Bent Tubing and 3\/8 Inch Laser-Cut Flanges\u003c\/h3\u003e\u003cp\u003eBBK forms the 1-3\/4 inch primary tubes on CNC mandrel-bending equipment. Mandrel bending keeps the tube diameter consistent through each bend, so the exhaust path is not pinched where the tubing changes direction. CNC control also keeps the bends repeatable from one header to the next.\u003c\/p\u003e\u003cp\u003eThe headers bolt to the cylinder heads through solid 3\/8 inch laser-cut flanges. Laser cutting produces precise port openings and bolt-hole locations, and the 3\/8 inch thickness gives the flanges a rigid mounting surface for the supplied gaskets. BBK describes the overall design as rugged. The product title lists the headers as the ceramic version.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe long tube layout replaces the restrictive factory exhaust manifolds with full-length primaries. BBK's testing on a 6-speed manual V6 Mustang recorded roughly 10+ horsepower and 5 ft-lbs of torque when the headers were run with a high flow catted X pipe.\u003c\/p\u003e\u003cp\u003eLong tube headers move the catalytic converters and oxygen sensors farther back in the exhaust system. As a result, the converters take longer to reach operating temperature. BBK notes that this can trigger a check engine light on some vehicles because the factory computer monitors converter temperature. According to BBK, the light does not indicate a physical problem with the headers, converters, or O2 sensors, does not affect drivability, and can be eliminated with a tune.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eA BBK short mid pipe is required to complete the installation, and it is sold separately.\u003c\/li\u003e\n\u003cli\u003e2011-2014 models: Part 1461, a 2-3\/4 inch short mid X pipe with converters, or Part 1462, a 2-3\/4 inch short mid X pipe for off-road use.\u003c\/li\u003e\n\u003cli\u003e2015-2017 models: Part 1465, a 2-1\/2 inch short mid H pipe with converters, or Part 14650, a 2-1\/2 inch short mid H pipe for off-road use.\u003c\/li\u003e\n\u003cli\u003eAll 2015-2017 Mustang V6 installations require front O2 wire harness extensions, Part 1119, which are purchased separately.\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions, new gaskets, and the required hardware come with the headers.\u003c\/li\u003e\n\u003cli\u003eA check engine light may appear after installing long tube headers and high flow mid pipes, and BBK states that a vehicle tune can eliminate it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds with a full-length long tube design aimed at increasing horsepower and torque on the 3.7L V6.\u003c\/li\u003e\n\u003cli\u003eBBK's own testing showed around 10+ horsepower and 5 ft-lbs of torque with a high flow catted X pipe.\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 1-3\/4 inch tubing and 3\/8 inch laser-cut flanges provide a consistent flow path and a solid sealing surface.\u003c\/li\u003e\n\u003cli\u003eMatching BBK short mid X and H pipes are available for both the 2011-2014 and 2015-2017 chassis, so the system can be completed with compatible parts.\u003c\/li\u003e\n\u003cli\u003eGaskets, hardware, and instructions are included, which simplifies parts gathering for a DIY install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011-2017 Ford Mustang V6 (3.7L)\u003c\/li\u003e\n\u003cli\u003e2015-2017 Ford Mustang V6\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers\u003c\/li\u003e\n\u003cli\u003eNew gaskets\u003c\/li\u003e\n\u003cli\u003eRequired installation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFront O2 wire harness extensions, Part 1119 (required for all 2015-2017 Mustang V6 installations)\u003c\/li\u003e\n\u003cli\u003eShort mid X pipe (Part 1461 or 1462 for 2011-2014) or short mid H pipe (Part 1465 or 14650 for 2015-2017), required to complete installation\u003c\/li\u003e\n\u003cli\u003eVehicle tune (may be needed to eliminate a check engine light)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68304941056185,"sku":"BBK-16420","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/16420_v1_2.jpg?v=1794430550","url":"https:\/\/engmustangs.com\/products\/bbk-1-3-4-long-tube-headers-ceramic-2011-2017-mustang-v6-16420","provider":"ENG Mustangs","version":"1.0","type":"link"}