{"product_id":"awe-3020-33030-2015-2017-2024-non-active-mustang-gt-catback-exhaust-track-diamond-black-tips","title":"AWE 3020-33030 2015-2017 \/ 2024 Non-Active Mustang GT Catback Exhaust Track (Diamond Black Tips)","description":"\u003cp\u003eThe AWE Tuning Track Edition Cat-Back Exhaust System (part number 3020-33030) is a complete bolt-on replacement for the factory exhaust from the catalytic converters back on Mustang GT models equipped with the non-active exhaust. It is the most aggressive configuration in the lineup, built around 3.0-inch CNC mandrel-bent T304 stainless steel tubing and finished with 4-inch slash-cut tips in a Diamond Black coating.\u003c\/p\u003e\n\u003cp\u003eThis system is aimed at owners who want an unfiltered exhaust note and are comfortable without drone-canceling technology. AWE states that the mandrel-bent layout improves exhaust flow for better horsepower, torque, and throttle response. It installs without cutting or welding, so you can do it in your own garage with basic hand tools. It suits track-day cars and street-driven GTs where sound intensity matters more than a quiet cabin.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTrack Edition configuration with an aggressive, raw sound profile\u003c\/li\u003e\n\u003cli\u003e3.0-inch CNC mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eNatural stainless finish on the piping\u003c\/li\u003e\n\u003cli\u003e4-inch slash-cut exhaust tips with Diamond Black coating\u003c\/li\u003e\n\u003cli\u003eNo drone-canceling technology, for an unfiltered exhaust note\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT models with the non-active exhaust only\u003c\/li\u003e\n\u003cli\u003eBolt-on design with no welding or cutting required\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 3020-33030\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel with CNC Mandrel-Bent Tubing\u003c\/h3\u003e\u003cp\u003eAWE builds the Track Edition cat-back from T304 stainless steel. The piping is left in a natural stainless finish, and the tips carry a Diamond Black coating.\u003c\/p\u003e\u003cp\u003eThe 3.0-inch tubing is CNC mandrel-bent, so the pipe keeps its full diameter through each bend instead of crimping. AWE describes the system as precision-engineered to fit the non-active-exhaust Mustang GT, which is what allows it to bolt in without modification.\u003c\/p\u003e\u003cp\u003eThe 4-inch slash-cut tips give the rear of the car a darker look that contrasts with the bare stainless piping ahead of them.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAWE describes the sound by driving condition. At idle the system produces a deep, commanding tone. Under acceleration it develops a resonant growl that builds noticeably as rpm climbs. At wide open throttle the note becomes loud and race-inspired, which AWE positions for spirited driving and track use.\u003c\/p\u003e\u003cp\u003eThe Track Edition does not use drone-canceling technology. Expect a raw, performance-focused sound at all times, including at cruising speeds, rather than a muted highway character.\u003c\/p\u003e\u003cp\u003eAccording to AWE, the combination of T304 stainless construction and 3.0-inch mandrel-bent tubing improves exhaust flow, with gains in horsepower, torque, and throttle response. AWE does not publish specific figures for these gains.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation with no cutting or welding required\u003c\/li\u003e\n\u003cli\u003eInstallation typically takes approximately 2-3 hours\u003c\/li\u003e\n\u003cli\u003eCan be completed with basic hand tools\u003c\/li\u003e\n\u003cli\u003eCompatible only with Mustang GT models that use the non-active exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the most aggressive sound level AWE offers and are comfortable without drone cancellation.\u003c\/li\u003e\n\u003cli\u003eThe 3.0-inch mandrel-bent T304 stainless tubing is intended to improve exhaust flow, with stated benefits to horsepower, torque, and throttle response.\u003c\/li\u003e\n\u003cli\u003eThe 4-inch Diamond Black slash-cut tips change the rear appearance of the car while the piping stays in natural stainless.\u003c\/li\u003e\n\u003cli\u003eIt bolts on with basic hand tools in roughly 2-3 hours and needs no cutting or welding.\u003c\/li\u003e\n\u003cli\u003eIt is designed for track use and spirited street driving where a loud, race-inspired note at wide open throttle is the goal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":68306105630905,"sku":"AWE3020-33030","price":1325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/3020-32028_2_3d341098-0663-42b7-a3df-c321962cd5e5.jpg?v=1794430594","url":"https:\/\/engmustangs.com\/products\/awe-3020-33030-2015-2017-2024-non-active-mustang-gt-catback-exhaust-track-diamond-black-tips","provider":"ENG Mustangs","version":"1.0","type":"link"}