American Racing Headers builds this long tube header system for the 2015-2017 Mustang GT. It pairs headers with 1-7/8 inch primary tubes and 3 inch collectors with 2-1/4 inch direct connect pipes that carry catalytic converters. The system is designed to mate to the factory resonator and cat-back, as well as aftermarket cat-back systems that retain the stock connection point. That lets you replace the restrictive factory manifolds and front pipes without re-engineering the rest of the exhaust.
Each system is fabricated in the USA from T304 stainless steel. The tubing is mandrel bent, the headers are hand ported, and every joint is TIG welded. A 3 inch outlet option is available for owners running a CORSA cat-back who want to eliminate the 2-1/4 inch restriction and run a full 3 inch system. For S550 GT owners who want long tube headers from a company whose products are used on factory-built drag race platforms, this kit is a practical choice.
Key Features
- Long tube header design with 1-7/8 inch primary tubes and 3 inch collectors
- 2-1/4 inch catted direct connect pipes
- Connects to the factory resonator and cat-back, or to aftermarket cat-backs that use the stock connection
- Optional 3 inch outlet configuration that connects directly to a CORSA 3 inch cat-back, removing the 2-1/4 inch restriction for a full 3 inch system
- Aircraft quality T304 stainless steel construction
- Mandrel bent stainless tubing specified by the manufacturer as 049 wall thickness
- Hand ported and fully TIG welded
- Made in the USA by American Racing Headers
USA-Built T304 Stainless Steel Construction
American Racing Headers fabricates this system in the USA from aircraft quality T304 stainless steel. The company describes its fabricators as experienced builders who also race with the parts they produce.
The tubing is mandrel bent, which maintains a consistent tube diameter through each bend. The manufacturer lists the material as 049 stainless, a figure that refers to wall thickness. In this numbering, a higher number means thicker tubing, so 065 is heavier than 049. The headers are hand ported and completely TIG welded.
American Racing Headers states that its header systems are installed at the factory on several purpose-built drag racing models: Ford's Cobra Jet Mustang, Dodge's Drag Pack cars, and Chevrolet's COPO Camaro.
Performance and Benefits
Long tube headers with 1-7/8 inch primaries and 3 inch collectors replace the factory exhaust manifolds on the 5.0L GT. The catted 2-1/4 inch direct connect pipes then route exhaust to the existing resonator and cat-back.
If you run a CORSA cat-back, the 3 inch outlet option removes the 2-1/4 inch bottleneck between the headers and the rest of the exhaust, giving you a 3 inch path all the way through.
Installation
- Designed to connect to the factory resonator and cat-back, or to aftermarket cat-backs that keep the stock connection
- The 3 inch outlet option is intended for CORSA 3 inch cat-back systems and connects to them directly
- The manufacturer states the system is engineered for straightforward fitment and installation
Why You Need This
- Replaces the factory exhaust manifolds on a 2015-2017 Mustang GT with long tube headers
- Catted direct connect pipes keep catalytic converters in the exhaust
- Works with the stock resonator and cat-back, so no further exhaust changes are required
- CORSA cat-back owners can choose the 3 inch outlet for a full 3 inch system
- T304 stainless construction with mandrel bent tubing and full TIG welds
- Made in the USA by a manufacturer whose header systems are used on factory drag race models
Vehicle Fitment
- 2015-2017 Ford Mustang GT
What's Included
- Long tube headers, 1-7/8 inch x 3 inch
- 2-1/4 inch catted direct connect pipes (3 inch outlet available as an option for CORSA cat-backs)