{"product_id":"american-racing-headers-1-7-8-x-3-longtube-headers-with-offroad-connection-pipes-direct-connection-for-corsa-catback-systems-2015-2017-mustang-gt","title":"American Racing Headers 1-7\/8\" x 3\" Longtube Headers with Offroad Connection Pipes - Direct Connection for CORSA Catback Systems (2015-2017 Mustang GT)","description":"\u003cp\u003eThis American Racing Headers long-tube header system pairs 1-7\/8 inch primary tubes with a 3 inch exhaust and a set of off-road connection pipes, configured as a Direct Connect Kit for the 2015-2017 Mustang GT with the 5.0L Coyote V8. The connection pipes are designed to bolt directly to CORSA cat-back exhaust systems, linking the headers to the rear of the exhaust without any welding.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e American Racing Headers states performance gains of up to 30 RWHP (rear-wheel horsepower) for its Direct Connect Kit. The manufacturer does not specify the test vehicle, supporting modifications, or tuning used to achieve this figure.\u003c\/p\u003e\n\u003cp\u003eThe S550 Mustang GT is a capable car out of the box, but American Racing Headers points to the factory exhaust as a restriction that keeps the Coyote from making the power and torque it is capable of. Replacing the stock manifolds and mid-section with this long-tube system addresses that restriction, with the manufacturer citing gains of up to 30 rear-wheel horsepower. The piping is mandrel-bent T304 stainless steel, and the system is made in the USA. It is a strong choice for owners who already run, or plan to run, a CORSA cat-back and want a matched header and connection pipe package.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 inch primary tube long-tube header design\u003c\/li\u003e\n\u003cli\u003e3 inch exhaust sizing\u003c\/li\u003e\n\u003cli\u003eOff-road connection pipes included in this configuration\u003c\/li\u003e\n\u003cli\u003eDirect Connect design made to mate with CORSA cat-back exhaust systems\u003c\/li\u003e\n\u003cli\u003eConnects to all CORSA cat-back systems for the 2015-2017 Mustang GT 5.0L\u003c\/li\u003e\n\u003cli\u003eNo welding required when used with a CORSA cat-back\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel piping\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe headers and connection pipes are built from T304 stainless steel piping, an alloy widely used in performance exhaust work for its resistance to corrosion and heat. Every bend is mandrel formed, which keeps the tubing at a consistent diameter through each curve rather than allowing it to crimp or flatten.\u003c\/p\u003e\u003cp\u003eAmerican Racing Headers manufactures this system in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLong-tube headers with 1-7\/8 inch primaries feeding a 3 inch exhaust replace the restrictive factory manifolds and mid-pipe on the Coyote 5.0L, and American Racing Headers rates the Direct Connect Kit at up to 30 RWHP in gains. The mandrel-bent construction preserves the full inside diameter of the tubing through each bend, supporting smooth exhaust flow from the cylinder heads back to the cat-back.\u003c\/p\u003e\u003cp\u003eBecause the off-road connection pipes are engineered specifically for CORSA cat-back systems, the complete path from the heads to the tailpipes is designed to work together as one system rather than relying on adapters or custom fabrication.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned to connect directly to CORSA cat-back exhaust systems with no welding required\u003c\/li\u003e\n\u003cli\u003eIntended for use exclusively with CORSA cat-back systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou run a CORSA cat-back on a 2015-2017 Mustang GT and want a long-tube header system made to connect to it directly\u003c\/li\u003e\n\u003cli\u003eThe manufacturer cites gains of up to 30 RWHP over the factory exhaust setup\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch primaries and 3 inch exhaust sizing replace the restrictive factory components\u003c\/li\u003e\n\u003cli\u003eMandrel-bent T304 stainless steel piping for consistent tube diameter and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eNo welding is needed to join the system to a CORSA cat-back\u003c\/li\u003e\n\u003cli\u003eBuilt in the USA by American Racing Headers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 inch x 3 inch long-tube headers\u003c\/li\u003e\n\u003cli\u003eOff-road connection pipes for CORSA cat-back systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"No Thanks","offer_id":68305567154361,"sku":"ARH-MTC5-15178300CCNC","price":1947.61,"currency_code":"USD","in_stock":true},{"title":"Yes Please","offer_id":68305567187129,"sku":"ARH-MTC5-15178300CCNC-GESI","price":3042.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/Mustang_Corsa_Direct_Connection_fffe8838-337b-425c-94b0-b1ea147636a3.png?v=1794430373","url":"https:\/\/engmustangs.com\/products\/american-racing-headers-1-7-8-x-3-longtube-headers-with-offroad-connection-pipes-direct-connection-for-corsa-catback-systems-2015-2017-mustang-gt","provider":"ENG Mustangs","version":"1.0","type":"link"}