This American Racing Headers kit pairs 1-7/8 in. primary long-tube headers with 3 in. catted connection pipes for the 2015-2017 Mustang GT with the 5.0L Coyote. ARH calls it a Direct Connect Kit because the connection pipes are built to mate straight to a CORSA cat-back system, so the header-to-cat-back transition needs no welding.
Manufacturer-stated gains: American Racing Headers states performance gains of up to 30 RWHP for its Direct Connect Kit. The manufacturer gives this as a single figure for the kit line, which comes in 1-3/4 in., 1-7/8 in., and 2 in. header sizes with a 3 in. exhaust. It does not specify test conditions, supporting modifications, tuning, or a result for the 1-7/8 in. size on its own.
The kit is aimed at Coyote owners who want to replace the restrictive factory exhaust manifolds and connecting pipes with a long-tube setup. It is fabricated in the USA from mandrel-bent, TIG-welded T304 stainless steel. If your car already runs a CORSA cat-back, or you plan to install one, this kit completes the exhaust forward of it with parts designed specifically for that pairing.
Key Features
- Long-tube headers with 1-7/8 in. primaries
- 3 in. catted connection pipes
- Direct connection to all CORSA cat-back systems for the 2015-2017 Mustang GT 5.0L
- Designed exclusively for use with CORSA cat-backs, with no welding required
- T304 stainless steel piping, described by the manufacturer as aircraft quality
- Mandrel-bent tubing in 049 wall thickness, ARH's thickness designation
- Hand-ported and fully TIG welded
- Made in the USA
- ARH header systems are used as original equipment on factory drag-race vehicles such as the Ford Cobra Jet Mustang
Mandrel-Bent T304 Stainless Steel, Made in the USA
ARH builds this system in the USA from T304 stainless steel, which the company describes as aircraft quality. The tubing is mandrel bent and uses what ARH calls 049 stainless. That number is the manufacturer's wall-thickness designation, and a higher number means thicker material, so 065 tubing has a heavier wall than 049.
The headers are hand ported and every joint is TIG welded. ARH fabricators build systems for racers worldwide, and the company races on its own products. Its header systems are fitted at the factory to Ford's Cobra Jet Mustang, and the company also supplies Chevrolet's COPO Camaro and Dodge's Drag Pack race cars.
Performance and Benefits
Long-tube headers replace the factory exhaust plumbing, which ARH considers a restriction on the Coyote's power and torque. The manufacturer rates its Direct Connect Kit for gains of up to 30 RWHP. Mandrel bending keeps the tube diameter consistent through the bends rather than letting it crimp. This kit uses 1-7/8 in. primaries, the middle size in a range that also includes 1-3/4 in. and 2 in. versions, with the 2 in. option reserved for maximum-effort builds.
Installation
- The connection pipes bolt directly to any CORSA cat-back system for the 2015-2017 Mustang GT 5.0L, with no welding required
- The kit is designed to work exclusively with CORSA cat-back systems
- ARH says it designs its systems for straightforward installation based on decades of fabrication and racing experience
Why You Need This
- Completes the exhaust ahead of an existing or planned CORSA cat-back without any welding
- Replaces the factory exhaust plumbing with long-tube headers rated by ARH for up to 30 RWHP
- Catted connection pipes keep catalytic converters in the system
- T304 stainless construction with 049 tubing, hand porting, and full TIG welding
- Made in the USA by a header supplier that provides factory equipment for drag-race programs such as the Cobra Jet Mustang
Vehicle Fitment
- 2015-2017 Ford Mustang GT
What's Included
- 1-7/8 in. long-tube headers
- 3 in. catted connection pipes
Not included:
- CORSA cat-back system (required, sold separately)