{"product_id":"american-racing-headers-1-7-8-x-3-long-tube-header-system-with-cats-2024-2026-mustang-5-0l-160233","title":"American Racing Headers 1-7\/8\" x 3\" Long Tube Header System - With Cats (2024-2026 Mustang 5.0L) - 160233","description":"\u003cp\u003eThe American Racing Headers 160233 is a complete long tube header system for the 2024-2026 Mustang with the 5.0L V8. It pairs 1-7\/8 in. primary tubes with a 3 in. exhaust path, and this version includes catalytic converters built on a 200-cell metallic substrate. A 3 in. X-pipe is part of the system as standard equipment, and the assembly connects to the factory axle-back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e American Racing Headers states performance gains of up to 30 RWHP for its Long System. The manufacturer does not give test conditions or specify which primary tube size produced that figure.\u003c\/p\u003e\n\u003cp\u003eThe system is aimed at owners of the seventh-generation Mustang who want more from the 5.0L than the factory exhaust delivers. American Racing Headers states gains of up to 30 RWHP for its Long System. Construction is entirely 304 stainless steel, and the headers are made in the USA. They use 3\/8 in. laser-cut flanges, hand-ported TIG-welded inlets, and merge collectors with scavenger spikes, which suits enthusiasts who want a long tube setup with catalytic converters that bolts into the rest of the stock exhaust.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 in. primary tubes with a 3 in. exhaust diameter\u003c\/li\u003e\n\u003cli\u003eLong tube header design\u003c\/li\u003e\n\u003cli\u003eCatted configuration with 200-cell metallic substrate catalytic converters\u003c\/li\u003e\n\u003cli\u003e3 in. X-pipe included as standard\u003c\/li\u003e\n\u003cli\u003eMade entirely of 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e3\/8 in. thick laser-cut flanges intended to resist warping and seal reliably\u003c\/li\u003e\n\u003cli\u003eHand-ported, TIG-welded inlets\u003c\/li\u003e\n\u003cli\u003ePrimary tube routing optimized for fit and performance\u003c\/li\u003e\n\u003cli\u003eMerge collectors with scavenger spikes\u003c\/li\u003e\n\u003cli\u003eConnects to the existing axle-back with a mark-and-cut procedure; no welding required\u003c\/li\u003e\n\u003cli\u003e100% made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction, Made in the USA\u003c\/h3\u003e\u003cp\u003eEvery part of this system is made from 304 stainless steel, and American Racing Headers builds it in the USA rather than outsourcing production. The head flanges are laser cut from 3\/8 in. thick material. Thick flanges like these are meant to stay flat through repeated heat cycles so the seal against the cylinder head holds up over time.\u003c\/p\u003e\u003cp\u003eEach inlet is hand ported and TIG welded. The primary tubes follow a routing the manufacturer has optimized for both fitment and performance. The catalytic converters use a 200-cell metallic substrate, which the manufacturer chose for its durability.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLong 1-7\/8 in. primaries feed merge collectors fitted with scavenger spikes, and the exhaust then flows into a 3 in. path that includes the supplied X-pipe. American Racing Headers positions this layout as a replacement for a restrictive factory exhaust on the seventh-generation 5.0L and rates its Long System at up to 30 RWHP.\u003c\/p\u003e\u003cp\u003eBecause this version keeps catalytic converters in the system, owners get long tube headers without moving to a catless setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe system mates to the vehicle's existing axle-back using a mark-and-cut method.\u003c\/li\u003e\n\u003cli\u003eNo welding is required to connect the system to the factory axle-back.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifolds and mid-section with long tube headers, a 3 in. X-pipe, and catalytic converters in a single system.\u003c\/li\u003e\n\u003cli\u003eThe manufacturer rates its Long System at up to 30 RWHP.\u003c\/li\u003e\n\u003cli\u003eAll-304 stainless construction with 3\/8 in. laser-cut flanges is built for long-term durability.\u003c\/li\u003e\n\u003cli\u003eRetaining catalytic converters with a 200-cell metallic substrate suits owners who want long tubes with cats in place.\u003c\/li\u003e\n\u003cli\u003eReuses the existing axle-back and needs no welding to connect.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 in. long tube headers\u003c\/li\u003e\n\u003cli\u003e3 in. X-pipe\u003c\/li\u003e\n\u003cli\u003e200-cell metallic substrate catalytic converters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68305202741433,"sku":"ARH-160233","price":2676.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/Gen_7_Coyote_Mustang_Long_System_2024-2025_8c0a1c73-60ef-4608-bbf1-174e8d9ed539.png?v=1794430347","url":"https:\/\/engmustangs.com\/products\/american-racing-headers-1-7-8-x-3-long-tube-header-system-with-cats-2024-2026-mustang-5-0l-160233","provider":"ENG Mustangs","version":"1.0","type":"link"}