{"product_id":"american-racing-headers-1-3-4-x-3-longtube-headers-with-catted-connection-pipes-direct-connection-for-corsa-catback-systems-2015-2017-mustang-gt","title":"American Racing Headers 1-3\/4\" x 3\" Longtube Headers with Catted Connection Pipes - Direct Connection for CORSA Catback Systems (2015-2017 Mustang GT)","description":"\u003cp\u003eThis American Racing Headers long-tube header kit pairs 1-3\/4 in. primary tubes and a 3 in. exhaust with catted connection pipes, built to bolt directly to CORSA cat-back exhaust systems on the 2015-2017 Mustang GT with the 5.0L Coyote engine. American Racing Headers developed the Direct Connect Kit to address the restrictive factory exhaust on the S550 GT and free up power and torque the car leaves untapped from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e American Racing Headers states performance gains of up to 30 RWHP (rear-wheel horsepower) for its Direct Connect Kit. The manufacturer does not specify test conditions or which primary tube size (1-3\/4 in., 1-7\/8 in., or 2 in.) produced this figure.\u003c\/p\u003e\n\u003cp\u003eThe piping is mandrel-bent T304 stainless steel, and the kit is made in the USA. Because it is designed specifically to mate with CORSA cat-backs, no welding is needed to join the two systems. For S550 GT owners who already run, or plan to run, a CORSA cat-back, this kit provides a matched long-tube header and catted mid-section from one manufacturer. American Racing Headers states gains of up to 30 rear-wheel horsepower for its Direct Connect Kit.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-3\/4 in. long-tube primary tubes\u003c\/li\u003e\n\u003cli\u003e3 in. exhaust sizing\u003c\/li\u003e\n\u003cli\u003eCatted connection pipes included with the headers\u003c\/li\u003e\n\u003cli\u003eDirect connection to CORSA cat-back systems for the 2015-2017 Mustang GT 5.0L\u003c\/li\u003e\n\u003cli\u003eDesigned to work exclusively with CORSA cat-backs, with no welding required\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel piping\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated gains of up to 30 RWHP for the Direct Connect Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eAmerican Racing Headers builds this kit from T304 stainless steel piping, a material choice that suits a component exposed to the high exhaust temperatures found right off the cylinder heads.\u003c\/p\u003e\u003cp\u003eAll tubing is mandrel bent, which keeps the pipe diameter consistent through each bend instead of crimping or flattening it. The headers and connection pipes are manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLong-tube headers with 1-3\/4 in. primaries replace the factory exhaust manifolds, which the manufacturer describes as restrictive on the S550 Mustang GT. Feeding into a 3 in. exhaust, the Direct Connect Kit is rated by American Racing Headers at up to 30 RWHP.\u003c\/p\u003e\u003cp\u003eThe catted connection pipes are shaped to meet CORSA cat-back systems directly, so the headers, mid-section, and rear exhaust function as a coordinated system without custom fabrication between them.\u003c\/p\u003e\u003cp\u003eAmerican Racing Headers also offers this header design in 1-7\/8 in. and 2 in. primary sizes, with the 2 in. option intended for maximum-effort builds. The 1-3\/4 in. version covered here is the smallest of the three.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNo welding is required to connect the kit to a CORSA cat-back system\u003c\/li\u003e\n\u003cli\u003eDesigned to connect exclusively to CORSA cat-back systems for the 2015-2017 Mustang GT 5.0L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou run or plan to run a CORSA cat-back on a 2015-2017 Mustang GT and want long-tube headers that connect to it directly without welding\u003c\/li\u003e\n\u003cli\u003eYou want to replace the restrictive factory exhaust manifolds with long-tube headers that the manufacturer rates at up to 30 RWHP\u003c\/li\u003e\n\u003cli\u003eThe kit includes catted connection pipes, so catalytic converters remain part of the exhaust system\u003c\/li\u003e\n\u003cli\u003eMandrel-bent T304 stainless steel piping provides consistent tube diameter and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eThe 1-3\/4 in. primary size is the smallest of the three sizes American Racing Headers offers, suited to builds that do not call for the larger max-effort tubes\u003c\/li\u003e\n\u003cli\u003eThe product is made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-3\/4 in. long-tube headers\u003c\/li\u003e\n\u003cli\u003eCatted connection pipes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68305823203513,"sku":"MTC5-15134300CCWC","price":2105.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/Mustang_Corsa_Direct_Connection_adcea7a9-ea04-4ec2-8068-9640e902a798.png?v=1794430401","url":"https:\/\/engmustangs.com\/products\/american-racing-headers-1-3-4-x-3-longtube-headers-with-catted-connection-pipes-direct-connection-for-corsa-catback-systems-2015-2017-mustang-gt","provider":"ENG Mustangs","version":"1.0","type":"link"}