{"product_id":"american-racing-headers-1-3-4-x-3-long-tube-header-system-with-cats-2024-2026-mustang-5-0l-160231","title":"American Racing Headers 1-3\/4\" x 3\" Long Tube Header System - With Cats (2024-2026 Mustang 5.0L) - 160231","description":"\u003cp\u003eThe American Racing Headers 160231 is a complete long tube header system for the 2024-2026 Mustang with the 5.0L V8. It pairs 1-3\/4 inch primary tubes with 3 inch exhaust sizing and includes catalytic converters. American Racing Headers builds the system from 304 stainless steel and manufactures it entirely in the USA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e American Racing Headers states performance gains of up to 30 RWHP for its Long System. The source does not specify the test conditions, the supporting modifications, or which primary tube size produced that figure.\u003c\/p\u003e\n\u003cp\u003eThe factory exhaust on the seventh-generation Mustang leaves power on the table, and this long system is designed to recover it. The manufacturer cites gains of up to 30 rear-wheel horsepower. The system includes a 3 inch X-pipe and connects to your existing axle-back with a mark-and-cut procedure that requires no welding. It suits S650 owners who want long tube header performance while keeping catalytic converters in the exhaust.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-3\/4 inch primary tubes with 3 inch exhaust sizing\u003c\/li\u003e\n\u003cli\u003eLong tube header design for the 2024-2026 Mustang 5.0L\u003c\/li\u003e\n\u003cli\u003eConstructed entirely from 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMade 100% in the USA and never outsourced, according to the manufacturer\u003c\/li\u003e\n\u003cli\u003e3\/8 inch laser-cut flanges that resist warping and hold a consistent seal\u003c\/li\u003e\n\u003cli\u003eTIG-welded inlets that are ported by hand\u003c\/li\u003e\n\u003cli\u003ePrimary tube routing optimized for fitment and performance\u003c\/li\u003e\n\u003cli\u003eMerge collectors fitted with scavenger spikes\u003c\/li\u003e\n\u003cli\u003eCatalytic converters built on a 200-cell metallic substrate for durability\u003c\/li\u003e\n\u003cli\u003e3 inch X-pipe included as standard\u003c\/li\u003e\n\u003cli\u003eConnects to the existing axle-back using a mark-and-cut method with no welding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction, Made in the USA\u003c\/h3\u003e\u003cp\u003eEvery part of this header system is made from 304 stainless steel, and American Racing Headers states that the system is manufactured entirely in the USA. The mounting flanges are laser cut from 3\/8 inch material. That thickness helps the flanges stay flat over repeated heat cycles, which keeps the seal at the cylinder head consistent.\u003c\/p\u003e\u003cp\u003eThe inlets are TIG welded and ported by hand. The primary tubes follow routing that the manufacturer optimized for both fitment and performance. On the catted version, the converters use a 200-cell metallic substrate, which American Racing Headers selected for its durability.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLong 1-3\/4 inch primaries feed merge collectors equipped with scavenger spikes, and the system steps up to 3 inch exhaust sizing. Together, these features are intended to move exhaust out of the 5.0L more efficiently than the restrictive factory setup. The manufacturer credits the system with gains of up to 30 RWHP.\u003c\/p\u003e\u003cp\u003eThe included 3 inch X-pipe joins the two banks downstream of the headers. The metallic-substrate catalytic converters keep emissions hardware in the system as part of the complete assembly.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe system mates to the factory or existing axle-back with a simple mark-and-cut procedure.\u003c\/li\u003e\n\u003cli\u003eNo welding is required to connect the system to the axle-back.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the restrictive factory exhaust on the 2024-2026 Mustang 5.0L with a long tube design that the manufacturer rates at up to 30 RWHP.\u003c\/li\u003e\n\u003cli\u003eIncludes catalytic converters with a 200-cell metallic substrate, so you are not adding cats separately.\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction and 3\/8 inch laser-cut flanges are built for long-term durability and a reliable header seal.\u003c\/li\u003e\n\u003cli\u003eA 3 inch X-pipe comes standard, so the system is complete from the heads back to the axle-back.\u003c\/li\u003e\n\u003cli\u003eWorks with your existing axle-back through a mark-and-cut process, with no welding needed.\u003c\/li\u003e\n\u003cli\u003eManufactured entirely in the USA by American Racing Headers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-3\/4 inch x 3 inch long tube headers\u003c\/li\u003e\n\u003cli\u003e3 inch X-pipe\u003c\/li\u003e\n\u003cli\u003eCatalytic converters (200-cell metallic substrate)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68305207328953,"sku":"ARH-160231","price":2643.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/Gen_7_Coyote_Mustang_Long_System_2024-2025_d8fb0b46-d69d-402c-b54c-0fa7fc8abdd4.png?v=1794430344","url":"https:\/\/engmustangs.com\/products\/american-racing-headers-1-3-4-x-3-long-tube-header-system-with-cats-2024-2026-mustang-5-0l-160231","provider":"ENG Mustangs","version":"1.0","type":"link"}