{"product_id":"american-racing-headers-1-3-4-x-3-long-tube-header-system-no-cats-2024-2026-mustang-5-0l-160232","title":"American Racing Headers 1-3\/4\" x 3\" Long Tube Header System - No Cats (2024-2026 Mustang 5.0L) - 160232","description":"\u003cp\u003eThe American Racing Headers 160232 is a long tube header system for the 2024-2026 Mustang with the 5.0L V8. This configuration uses 1-3\/4 in primary tubes feeding a 3 in exhaust and is the no-cat version of the system. American Racing Headers designed it to replace the restrictive factory exhaust on the seventh-generation Mustang, which the manufacturer describes as holding back the Coyote's power and torque. A 3 in X-pipe is included as standard, so the system covers the run from the cylinder heads back to your existing axle-back.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e American Racing Headers states that its Long System for the seventh-generation Mustang delivers gains of up to 30 RWHP. The manufacturer does not list specific test conditions, supporting modifications, or tuning requirements, and the figure is quoted for the Long System generally rather than for the 1-3\/4 in primary size specifically.\u003c\/p\u003e\n\u003cp\u003eThe full system is built from 304 stainless steel and manufactured in the USA by American Racing Headers without outsourcing. It uses thick laser-cut flanges, hand-ported inlets, and collectors fitted with scavenger spikes. For owners who want long tube headers that connect to the stock axle-back without welding, this 1-3\/4 in system is a practical way to free up the 5.0L. ARH also offers the same platform with 1-7\/8 in primaries, or 2 in primaries for max-effort builds.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-3\/4 in primary tubes with a 3 in exhaust\u003c\/li\u003e\n\u003cli\u003eNo-cat configuration\u003c\/li\u003e\n\u003cli\u003e3 in X-pipe included as standard\u003c\/li\u003e\n\u003cli\u003eConstructed fully from 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e3\/8 in thick laser-cut flanges that resist warping and hold a consistent seal\u003c\/li\u003e\n\u003cli\u003eInlets hand ported and joined with TIG welding\u003c\/li\u003e\n\u003cli\u003ePrimary tubes routed for both fitment and performance\u003c\/li\u003e\n\u003cli\u003eCollectors use scavenger spikes at the merge\u003c\/li\u003e\n\u003cli\u003eConnects to the existing axle-back with a mark-and-cut process, no welding needed\u003c\/li\u003e\n\u003cli\u003eManufactured in the USA without outsourcing\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 160232\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction, Made in the USA\u003c\/h3\u003e\u003cp\u003eEvery part of the system is made from 304 stainless steel. American Racing Headers builds it in the USA and states that it does not outsource production.\u003c\/p\u003e\u003cp\u003eThe head flanges are laser cut from 3\/8 in thick material. The thickness helps them resist warping, which keeps the seal at the cylinder head consistent over time. At the inlets, the tubes are hand ported and joined with TIG welds.\u003c\/p\u003e\u003cp\u003eARH routes the primary tubes with both fitment and performance in mind. The primaries end at merge collectors that incorporate scavenger spikes.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eLong 1-3\/4 in primaries feed a 3 in exhaust and the included 3 in X-pipe. Together they replace the factory exhaust, which American Racing Headers identifies as the main restriction on the seventh-generation 5.0L. ARH rates its Long System at gains of up to 30 RWHP.\u003c\/p\u003e\u003cp\u003eThe scavenger spikes in the merge collectors and the routing of the primary tubes are part of the manufacturer's approach to performance in this design. The 1-3\/4 in primary size is the smallest of the three ARH offers for this platform. The 2 in option is the one ARH positions for max-effort applications.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe system mates to the vehicle's existing axle-back with a simple mark-and-cut procedure.\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states that no welding is required to connect the system to the axle-back.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust that the manufacturer says holds back power and torque on the seventh-generation Mustang 5.0L.\u003c\/li\u003e\n\u003cli\u003eThe manufacturer rates the Long System at up to 30 RWHP.\u003c\/li\u003e\n\u003cli\u003eFull 304 stainless steel construction and 3\/8 in thick laser-cut flanges are aimed at long-term durability and a reliable head seal.\u003c\/li\u003e\n\u003cli\u003eA 3 in X-pipe comes standard, so no separate mid-pipe purchase is needed to complete the system.\u003c\/li\u003e\n\u003cli\u003eWorks with your existing axle-back using a mark-and-cut connection rather than welding.\u003c\/li\u003e\n\u003cli\u003eBuilt in the USA by American Racing Headers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header system with 1-3\/4 in primaries\u003c\/li\u003e\n\u003cli\u003e3 in X-pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCatalytic converters (this is the no-cat version)\u003c\/li\u003e\n\u003cli\u003eAxle-back (the system connects to the vehicle's existing axle-back)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68305310154937,"sku":"ARH-160232","price":2449.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/Gen_7_Coyote_Mustang_Long_System_2024-2025_7402aa60-2b44-4ceb-b6a2-789c25945e91.png?v=1794430347","url":"https:\/\/engmustangs.com\/products\/american-racing-headers-1-3-4-x-3-long-tube-header-system-no-cats-2024-2026-mustang-5-0l-160232","provider":"ENG Mustangs","version":"1.0","type":"link"}