{"product_id":"american-racing-2018-2023-mustang-gt-1-7-8-x-3-catted-x-exhaust-system-w-pure-thunder-mufflers","title":"American Racing 2018-2023 Mustang GT 1-7\/8\" x 3\" Catted X Exhaust System w\/ Pure Thunder Mufflers","description":"\u003cp\u003eThe American Racing Headers 1-7\/8 in. x 3 in. Catted X Exhaust System is a complete exhaust package for the 2018-2023 Mustang GT. It pairs 1-7\/8 in. primary sizing with 3 in. tubing that runs back to the rear axle, where it connects to the company's Pure Thunder Series axle-back. The design combines catalytic converters with an X-style crossover. American Racing Headers builds the system in the USA from T304 stainless steel.\u003c\/p\u003e\n\u003cp\u003eThe system is aimed at Coyote-powered GT owners who want a deeper, fuller exhaust note without the high-pitched rasp or cabin drone that some aftermarket setups bring. American Racing Headers says its complete systems can be configured for builds ranging from a stock car to more than 1000 RWHP, depending on the primary and collector sizes chosen. The 1-7\/8 in. configuration offered here is the middle of the company's three primary sizes.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-7\/8 in. primary sizing with 3 in. exhaust tubing to the rear axle\u003c\/li\u003e\n\u003cli\u003eCatted design with an X-style crossover\u003c\/li\u003e\n\u003cli\u003ePure Thunder Series axle-back mufflers\u003c\/li\u003e\n\u003cli\u003eDeep, throaty tone with no high-pitched rasp or cabin drone, according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eAircraft-quality T304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent .049 wall stainless tubing\u003c\/li\u003e\n\u003cli\u003eHand ported and fully TIG welded\u003c\/li\u003e\n\u003cli\u003eManufactured 100% in the USA by American Racing Headers\u003c\/li\u003e\n\u003cli\u003eManufacturer states its complete systems can suit builds from stock to over 1000 RWHP, depending on primary and collector size\u003c\/li\u003e\n\u003cli\u003eOther primary sizes offered: 1-3\/4 in. and 2 in. (the 2 in. size is for max-effort racing)\u003c\/li\u003e\n\u003cli\u003eCollector sizes up to 3-1\/2 in. are offered across the system range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel, Made in the USA\u003c\/h3\u003e\u003cp\u003eAmerican Racing Headers fabricates this system in the USA from aircraft-quality T304 stainless steel. The tubing is mandrel bent, which keeps the inside diameter consistent through each bend. Wall thickness is .049, a gauge figure that describes how thick the stainless tubing is. A higher number means a thicker wall, so .065 tubing would be heavier gauge than the .049 used here. The system is hand ported and fully TIG welded.\u003c\/p\u003e\u003cp\u003eThe company's fabricators also race the products they build. Its header systems are installed as original equipment on the Chevrolet COPO Camaro, the Dodge Drag Pack, and Ford's Cobra Jet Mustang. That gives a sense of the build quality and performance standards behind this street-oriented system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound is tuned by the Pure Thunder Series axle-back. The manufacturer describes the result as a deep, throaty tone without high-pitched rasp or drone inside the cabin, which matters if the car sees regular street miles.\u003c\/p\u003e\u003cp\u003eThe 3 in. tubing runs all the way to the rear axle, and the crossover is X-style. American Racing Headers says its complete systems can be matched to anything from a stock vehicle to builds exceeding 1000 RWHP, with the right primary and collector sizes. The 1-7\/8 in. primaries in this configuration sit between the 1-3\/4 in. and 2 in. options.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAmerican Racing Headers states the system is engineered for straightforward installation, drawing on the company's decades of fabrication and racing experience.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou get a complete exhaust system for a 2018-2023 Mustang GT instead of piecing together separate components.\u003c\/li\u003e\n\u003cli\u003eThe catted design and the Pure Thunder mufflers' drone-free tone suit a car that is driven on the street.\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel, mandrel bends, and full TIG welding are built for long-term durability.\u003c\/li\u003e\n\u003cli\u003eThe system is built in the USA by a manufacturer whose headers come on factory drag cars such as the Cobra Jet Mustang.\u003c\/li\u003e\n\u003cli\u003eThe 1-7\/8 in. primary size leaves room for power growth beyond a stock setup, based on the manufacturer's sizing guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68304906354873,"sku":"MTC5-18178300FSWC","price":4194.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/mtc5-15134300fshnc_d603f2d2-2a84-489c-9581-02abdd0a5da4.jpg?v=1794430317","url":"https:\/\/engmustangs.com\/products\/american-racing-2018-2023-mustang-gt-1-7-8-x-3-catted-x-exhaust-system-w-pure-thunder-mufflers","provider":"ENG Mustangs","version":"1.0","type":"link"}