{"product_id":"american-racing-2018-2023-mustang-1-7-8-x-3-long-tube-headers-and-off-road-x-pipe-bottleneck-eliminator-system","title":"American Racing 2018-2023 Mustang 1-7\/8\" x 3\" Long Tube Headers and Off Road X Pipe (Bottleneck Eliminator System)","description":"\u003cp\u003eThe American Racing Headers Bottleneck Eliminator System pairs a set of 1-7\/8 in. x 3 in. long tube headers with an off-road X-pipe for 2018-2023 Mustangs running an aftermarket cat-back exhaust. American Racing Headers designed the package around one specific problem: the 2-1\/4 in. inlet restriction that aftermarket cat-backs are built with to mate to the factory mid-pipe. The X-pipe outlet here measures 3 in. ID, so once the cat-back inlet is trimmed, the exhaust path stays at a consistent 3 in. from the X-pipe rearward.\u003c\/p\u003e\n\u003cp\u003eEach system is fabricated in the USA from aircraft-quality T304 stainless steel, with mandrel-bent tubing that is hand ported and fully TIG welded. American Racing Headers builds and races its own systems, and the same company supplies header systems that come installed from the factory on the Ford Cobra Jet Mustang, the Dodge Drag Pack, and the Chevrolet COPO Camaro. For owners who already have, or plan to add, an aftermarket cat-back, this kit replaces the factory headers and mid-pipe in one step and removes the inlet bottleneck that a cat-back alone cannot fix.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBottleneck Eliminator System: long tube headers combined with an off-road X-pipe\u003c\/li\u003e\n\u003cli\u003e1-7\/8 in. x 3 in. long tube header sizing, as listed by the manufacturer\u003c\/li\u003e\n\u003cli\u003eX-pipe outlet is 3 in. inside diameter\u003c\/li\u003e\n\u003cli\u003eRemoves the 2-1\/4 in. inlet restriction found on aftermarket cat-back systems\u003c\/li\u003e\n\u003cli\u003eDesigned for use with aftermarket cat-back exhausts only\u003c\/li\u003e\n\u003cli\u003eAircraft-quality T304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 049 stainless tubing (049 refers to the tubing thickness; 065 would be thicker)\u003c\/li\u003e\n\u003cli\u003eHand ported and fully TIG welded\u003c\/li\u003e\n\u003cli\u003eHandcrafted and 100% made in the USA\u003c\/li\u003e\n\u003cli\u003eBuilt by the supplier of factory header systems for the Ford Cobra Jet Mustang, Dodge Drag Pack, and Chevrolet COPO Camaro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUSA-Made T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eAmerican Racing Headers fabricates the Bottleneck Eliminator System in the USA using aircraft-quality T304 stainless steel. The headers and X-pipe are built by hand by the company's own fabricators, and the brand states that its header and exhaust systems are 100% American made.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent from 049 stainless. ARH uses this number to describe tubing thickness, with higher numbers indicating thicker material; for reference, 065 tubing would be thicker than 049. Every system is hand ported and completely TIG welded.\u003c\/p\u003e\u003cp\u003eARH header systems are installed at the factory on purpose-built drag cars including the Ford Cobra Jet Mustang, the Dodge Drag Pack, and the Chevrolet COPO Camaro, and the company also campaigns its own products in competition.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMost aftermarket cat-backs for these Mustangs neck down to 2-1\/4 in. at the inlet so they can bolt to the stock mid-pipe. That reduction remains in the system no matter how large the rest of the cat-back tubing is. The Bottleneck Eliminator addresses it by supplying an X-pipe with a 3 in. ID outlet, allowing the restricted inlet section of the cat-back to be cut away.\u003c\/p\u003e\u003cp\u003eCombined with long tube headers, the result is a header-to-cat-back path designed without the inlet restriction. American Racing Headers also emphasizes fitment, stating its systems are engineered to install with less hassle based on decades of fabrication and racing experience.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompatible with aftermarket cat-back exhausts only; not intended for use with the factory cat-back\u003c\/li\u003e\n\u003cli\u003eRequires cutting a small section from the inlet side of the aftermarket cat-back to remove the 2-1\/4 in. restriction\u003c\/li\u003e\n\u003cli\u003eManufacturer states the system is engineered for straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou already run an aftermarket cat-back and want to remove the 2-1\/4 in. inlet restriction it was built with\u003c\/li\u003e\n\u003cli\u003eYou want long tube headers and an X-pipe from a single matched system rather than mixing brands\u003c\/li\u003e\n\u003cli\u003eThe X-pipe outlet is 3 in. ID, keeping the cat-back connection at full size once trimmed\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel, mandrel-bent tubing, and full TIG welding offer durable construction\u003c\/li\u003e\n\u003cli\u003eThe system is made in the USA by a company whose headers come installed on factory drag cars such as the Cobra Jet Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers (1-7\/8 in. x 3 in.)\u003c\/li\u003e\n\u003cli\u003eOff-road X-pipe with 3 in. ID outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAftermarket cat-back exhaust (required for use with this system)\u003c\/li\u003e\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68305703469241,"sku":"ARH-MTC5-18178300BEXNC","price":2073.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/mtc5-15134300bexnc_50a7661a-611f-4de8-aaa3-d1921e4c5809.jpg?v=1794430392","url":"https:\/\/engmustangs.com\/products\/american-racing-2018-2023-mustang-1-7-8-x-3-long-tube-headers-and-off-road-x-pipe-bottleneck-eliminator-system","provider":"ENG Mustangs","version":"1.0","type":"link"}