{"product_id":"american-racing-2018-2023-mustang-1-7-8-x-3-long-tube-headers-and-catted-x-pipe-bottleneck-eliminator-system","title":"American Racing 2018-2023 Mustang 1-7\/8\" x 3\" Long Tube Headers and Catted X Pipe (Bottleneck Eliminator System)","description":"\u003cp\u003eThe American Racing Headers Bottleneck Eliminator System pairs 1-7\/8 in. x 3 in. long tube headers with a catted X-pipe for 2018-2023 Ford Mustangs that run an aftermarket cat-back. Its purpose is narrow and specific: aftermarket cat-back systems are built with a 2-1\/4 in. restriction at the inlet, and this header and mid-pipe combination is designed to remove that choke point so the exhaust can stay at full size from the collectors back. The X-pipe outlet measures 3 in. inside diameter.\u003c\/p\u003e\n\u003cp\u003eAmerican Racing Headers builds the system in the USA from T304 stainless steel, using mandrel-bent 049 tubing, hand-ported construction, and full TIG welding. The company's header systems are installed at the factory on purpose-built race cars, including Ford's Cobra Jet Mustang. For owners who already run, or plan to run, an aftermarket cat-back and want to eliminate the undersized inlet, this kit addresses that issue directly while replacing the factory headers and mid-pipe in one package.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers with 1-7\/8 in. primaries and 3 in. collectors, per the product title\u003c\/li\u003e\n\u003cli\u003eCatted X-pipe with a 3 in. ID outlet\u003c\/li\u003e\n\u003cli\u003eDesigned to remove the 2-1\/4 in. inlet restriction found on aftermarket cat-back systems\u003c\/li\u003e\n\u003cli\u003eIntended for use with aftermarket cat-backs only\u003c\/li\u003e\n\u003cli\u003eManufactured from T304 stainless steel, described by the manufacturer as aircraft quality\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 049 stainless tubing (049 denotes tubing wall thickness; a higher number indicates thicker material, so 065 is thicker than 049)\u003c\/li\u003e\n\u003cli\u003eHand-ported and fully TIG welded\u003c\/li\u003e\n\u003cli\u003eMade in the USA by American Racing Headers\u003c\/li\u003e\n\u003cli\u003eARH header systems are supplied as factory equipment on the Ford Cobra Jet Mustang, Dodge Drag Pack, and Chevrolet COPO Camaro\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUSA-Made T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eAmerican Racing Headers fabricates this system in the USA using T304 stainless steel, which the company specifies as aircraft-quality material. The tubing is mandrel bent from 049 stainless, a designation that refers to wall thickness. For reference, ARH notes that the number rises as the material gets thicker, meaning 065 tubing is heavier-walled than 049.\u003c\/p\u003e\u003cp\u003eEach system is hand ported and joined with complete TIG welding. ARH states that its fabricators race with the same products they build, and the company's header systems are fitted at the factory to dedicated drag cars, including the Ford Cobra Jet Mustang, Dodge Drag Pack, and Chevrolet COPO Camaro.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe core benefit of this system is eliminating the 2-1\/4 in. inlet that aftermarket cat-backs are built with. By trimming that restricted section and connecting the cat-back directly to the 3 in. ID outlet of the X-pipe, the exhaust path avoids the reduction in diameter at the mid-pipe junction.\u003c\/p\u003e\u003cp\u003eARH also emphasizes fitment, stating that its systems are engineered to install with minimal hassle, drawing on decades of fabrication and racing experience.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor use with aftermarket cat-back exhaust systems only; it is not intended for the factory cat-back\u003c\/li\u003e\n\u003cli\u003eA small section of the aftermarket cat-back must be cut off at the inlet side to remove the 2-1\/4 in. restriction\u003c\/li\u003e\n\u003cli\u003eThe X-pipe outlet is 3 in. ID; plan the cat-back connection accordingly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou run an aftermarket cat-back and want to remove the 2-1\/4 in. inlet restriction it was built with\u003c\/li\u003e\n\u003cli\u003eYou want long tube headers and a catted X-pipe sourced as a matched system rather than piecing together separate components\u003c\/li\u003e\n\u003cli\u003eYou prefer USA-made T304 stainless steel construction with mandrel-bent tubing and full TIG welds\u003c\/li\u003e\n\u003cli\u003eYou value a manufacturer whose header systems are used as factory equipment on the Ford Cobra Jet Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers (1-7\/8 in. x 3 in.)\u003c\/li\u003e\n\u003cli\u003eCatted X-pipe with 3 in. ID outlet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68305694261433,"sku":"ARH-MTC5-18178300BEXWC","price":2266.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/mtc5-15134300bexnc_313b0a56-9eed-46f6-a3c9-ecd203fa200d.jpg?v=1794430387","url":"https:\/\/engmustangs.com\/products\/american-racing-2018-2023-mustang-1-7-8-x-3-long-tube-headers-and-catted-x-pipe-bottleneck-eliminator-system","provider":"ENG Mustangs","version":"1.0","type":"link"}