{"product_id":"american-racing-2018-2023-mustang-1-3-4-x-3-long-tube-headers-and-catted-x-pipe-bottleneck-eliminator-system","title":"American Racing 2018-2023 Mustang 1-3\/4\" x 3\" Long Tube Headers and Catted X Pipe (Bottleneck Eliminator System)","description":"\u003cp\u003eThe American Racing Headers Bottleneck Eliminator System pairs 1-3\/4 in. x 3 in. long tube headers with a catted X-pipe for 2018-2023 Mustangs. It is built specifically for cars running an aftermarket cat-back exhaust. According to the manufacturer, aftermarket cat-backs are forced to use a 2-1\/4 in. restriction at the inlet side, and this header and X-pipe combination is designed to remove that choke point. The X-pipe outlet measures 3 in. ID, so exhaust flow stays at full diameter from the collectors back to the cat-back.\u003c\/p\u003e\n\u003cp\u003eAmerican Racing Headers builds its header and exhaust systems in the USA from aircraft-quality T304 stainless steel. The tubing is mandrel bent, the ports are finished by hand, and every joint is TIG welded. If your Mustang already runs an aftermarket cat-back, or you plan to add one, this system replaces the factory headers and mid-pipe section in one package and is engineered to clear the inlet restriction that would otherwise remain in place.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube header design with 1-3\/4 in. primaries and 3 in. collectors, per the product title\u003c\/li\u003e\n\u003cli\u003eCatted X-pipe included as part of the system, per the product title\u003c\/li\u003e\n\u003cli\u003eX-pipe outlet diameter of 3 in. ID\u003c\/li\u003e\n\u003cli\u003eDesigned to eliminate the 2-1\/4 in. inlet restriction found on aftermarket cat-backs\u003c\/li\u003e\n\u003cli\u003eIntended for use with aftermarket cat-back exhaust systems only\u003c\/li\u003e\n\u003cli\u003eAircraft-quality T304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 049 stainless steel tubing\u003c\/li\u003e\n\u003cli\u003eHand-ported and fully TIG welded\u003c\/li\u003e\n\u003cli\u003e100% made in the USA by American Racing Headers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel, Made in the USA\u003c\/h3\u003e\u003cp\u003eAmerican Racing Headers fabricates this system in the USA from aircraft-quality T304 stainless steel. The tubing is mandrel bent, which keeps the inside diameter consistent through each bend instead of crimping it the way compression bending can.\u003c\/p\u003e\u003cp\u003eThe manufacturer specifies 049 stainless tubing for its exhaust tuning. The number describes the wall thickness of the tubing, and higher numbers mean thicker walls, so 065 tubing would be heavier gauge than 049. Each header is hand ported and fully TIG welded by the company's fabricators.\u003c\/p\u003e\u003cp\u003eAmerican Racing Headers also reports that its header systems are installed at the factory on Ford's Cobra Jet Mustang, Chevrolet's COPO Camaro, and Dodge's Drag Pack cars. The company says it races its own products as well.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe main purpose of this system is to remove a specific flow restriction. American Racing Headers states that aftermarket cat-backs use a 2-1\/4 in. section at the inlet. Cutting that section away and connecting the cat-back to this system's 3 in. ID X-pipe outlet keeps exhaust flow at a larger diameter from the long tube collectors through the mid-pipe.\u003c\/p\u003e\u003cp\u003eThe long tube layout, with 1-3\/4 in. primaries feeding 3 in. collectors, replaces the factory header arrangement. The X-pipe design connects the two banks ahead of the cat-back. The manufacturer does not publish horsepower, torque, or sound figures for this system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFor use with aftermarket cat-back exhaust systems only; it is not intended to mate to a factory cat-back\u003c\/li\u003e\n\u003cli\u003eA small section must be cut from the inlet side of the aftermarket cat-back to remove the 2-1\/4 in. restriction\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states the system is engineered for accurate fitment and straightforward installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYour Mustang already runs an aftermarket cat-back, and you want to remove the 2-1\/4 in. inlet restriction that the manufacturer identifies in those systems\u003c\/li\u003e\n\u003cli\u003eYou want long tube headers and a catted X-pipe that are engineered together as one matched system\u003c\/li\u003e\n\u003cli\u003eYou want USA-made, mandrel-bent T304 stainless steel with hand-ported, fully TIG-welded construction\u003c\/li\u003e\n\u003cli\u003eYou want hardware from a manufacturer whose header systems are used as factory equipment on purpose-built drag cars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers, 1-3\/4 in. x 3 in.\u003c\/li\u003e\n\u003cli\u003eCatted X-pipe with 3 in. ID outlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAftermarket cat-back exhaust, which is required and must be purchased separately\u003c\/li\u003e\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68305701404857,"sku":"ARH-MTC5-18134300BEXWC","price":2232.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/mtc5-15134300bexnc_2a1e47e9-a5f6-44c7-92f8-bfba6616444d.jpg?v=1794430392","url":"https:\/\/engmustangs.com\/products\/american-racing-2018-2023-mustang-1-3-4-x-3-long-tube-headers-and-catted-x-pipe-bottleneck-eliminator-system","provider":"ENG Mustangs","version":"1.0","type":"link"}