{"product_id":"american-racing-2015-2020-shelby-gt350-cat-back-system-with-pure-thunder-mufflers-mtsh3-16300ctbk","title":"American Racing 2015-2020 Shelby GT350 Cat Back System with Pure Thunder Mufflers MTSH3-16300CTBK","description":"\u003cp\u003eThe American Racing Headers Pure Thunder Cat-Back System (part number MTSH3-16300CTBK) is a complete cat-back exhaust built for the 2015-2020 Shelby GT350. It is intended for owners who want a deeper exhaust note on the Voodoo-powered Shelby, and American Racing Headers says the Pure Thunder mufflers produce virtually no high-pitched rasp. The system is built in the USA from T304 stainless steel and uses mandrel-bent tubing with full TIG welding.\u003c\/p\u003e\n\u003cp\u003eThe muffler section finishes in 4 inch polished, double-walled tips that can be adjusted, so you can set the tip position to the look you prefer. The manufacturer states the mufflers are built to handle tremendous power, which matters if your GT350 is already modified or will be. American Racing Headers supplies header systems as original equipment on several factory drag-racing packages, and that same fabrication background goes into this cat-back. For GT350 owners who want a deeper tone without high-pitched rasp, this system offers stainless construction and domestic manufacturing.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePure Thunder mufflers tuned for a deep tone with virtually no high-pitched rasp, according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eConstructed from aircraft-quality T304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing with an 049 wall thickness designation\u003c\/li\u003e\n\u003cli\u003eCompletely TIG welded and hand ported, per American Racing Headers\u003c\/li\u003e\n\u003cli\u003e4 inch polished, double-walled exhaust tips\u003c\/li\u003e\n\u003cli\u003eTips are adjustable so their position can be set to the desired appearance\u003c\/li\u003e\n\u003cli\u003eMufflers are 100 percent made in the USA\u003c\/li\u003e\n\u003cli\u003eDesigned by the manufacturer to handle tremendous power\u003c\/li\u003e\n\u003cli\u003eReuses the factory GT350 rear valance tips\u003c\/li\u003e\n\u003cli\u003eManufacturer part number MTSH3-16300CTBK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent and TIG Welded\u003c\/h3\u003e\u003cp\u003eAmerican Racing Headers fabricates this cat-back in the USA from aircraft-quality T304 stainless steel. The tubing is mandrel bent, which keeps the pipe diameter consistent through each bend, and every joint is TIG welded. The manufacturer also describes the system as hand ported.\u003c\/p\u003e\u003cp\u003eARH specifies its exhaust tubing as 049 stainless. The company explains that this figure describes wall thickness, with a higher number meaning thicker material, so 065 tubing would be heavier wall than 049. The mufflers are made of 304 stainless steel and built entirely in the USA.\u003c\/p\u003e\u003cp\u003eAmerican Racing Headers builds headers and exhaust systems for racers worldwide and races its own products. Its header systems are installed as original equipment on Ford's Cobra Jet Mustang, the Dodge Drag Pack, and the Chevrolet COPO Camaro.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Pure Thunder mufflers are aimed at drivers who want a deeper exhaust note from the GT350. American Racing Headers says the design delivers that deeper tone with virtually no high-pitched rasp.\u003c\/p\u003e\u003cp\u003eThe manufacturer states the mufflers can handle tremendous power, so the system is suited to GT350s that are already modified or will be.\u003c\/p\u003e\u003cp\u003eThe 4 inch polished, double-walled tips can be adjusted, letting you set their position for the exact appearance you want at the rear of the car.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe system reuses the factory GT350 rear valance tips\u003c\/li\u003e\n\u003cli\u003eAmerican Racing Headers states its exhaust systems are engineered for easy installation, based on decades of fabrication and racing experience\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a deeper exhaust tone on your GT350 with virtually no high-pitched rasp\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction with full TIG welding offers corrosion resistance and long-term durability\u003c\/li\u003e\n\u003cli\u003eMufflers built to handle tremendous power suit a GT350 that is modified now or will be later\u003c\/li\u003e\n\u003cli\u003eAdjustable 4 inch polished, double-walled tips let you fine-tune the rear appearance\u003c\/li\u003e\n\u003cli\u003eMade in the USA by a header and exhaust manufacturer that supplies factory drag-racing packages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2020 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68305200873657,"sku":"ARH-MTSH3-16300CTBK","price":2079.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/GT_350_Catback.png?v=1794430341","url":"https:\/\/engmustangs.com\/products\/american-racing-2015-2020-shelby-gt350-cat-back-system-with-pure-thunder-mufflers-mtsh3-16300ctbk","provider":"ENG Mustangs","version":"1.0","type":"link"}