American Racing Headers

American Racing 2015-2020 Shelby GT350 2" x 3" Offroad System with Pure Thunder Mufflers (Full System No Resonators) 160205

$4,385.64
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The American Racing Headers 160205 is a full exhaust system for the Shelby GT350 Mustang, configured as an off-road system with Pure Thunder mufflers and no resonators. Built in the USA entirely from 304 stainless steel, it replaces the factory exhaust from the long-tube headers back through the X-pipe and mid section to the mufflers and tailpipes. The tailpipes are designed to connect to the GT350's original polished stainless steel tips, so the factory rear appearance stays intact.

Manufacturer-stated gains: American Racing Headers states a gain of 31 rear-wheel horsepower and 18 lb-ft of torque over the GT350's 526 hp stock rating. The manufacturer describes the tested system as headers, high-flow catalytic converters, mid-tube, X-pipe, and tailpipes. It does not state whether the same figures apply to this off-road (no resonator) configuration.

This system is aimed at GT350 owners who want more output from the 5.2L V8 and a more aggressive exhaust note. American Racing Headers developed its mufflers through dyno testing at its own facility and years of on-road tuning. Mandrel-bent 16-gauge tubing, 3/8 inch laser-cut flanges, and merge collectors with scavenger spikes reflect a design built specifically around the GT350's chassis. Like all American Racing Headers exhaust systems, it is intended for off-road use only.

Key Features

  • Full system configuration with Pure Thunder mufflers and no resonators
  • Constructed entirely from 304 stainless steel
  • 16-gauge tubing, mandrel bent to fit the GT350 chassis
  • Headers with 1 7/8 inch primary tubes and 3 inch collectors
  • Merge collectors with scavenger spikes (directional spike design)
  • Hand-ported, TIG-welded header inlets
  • Primary tube routing optimized for fit and performance
  • 3/8 inch thick laser-cut flanges for a warp-free seal
  • System includes headers, X-pipe, mid section, ARH-exclusive mufflers, and tailpipes
  • Tailpipes connect to the factory GT350 polished stainless steel exhaust tips
  • Mounts using the factory exhaust hangers
  • 100% made in the USA, never outsourced
  • Off-road use only

Mandrel-Bent 16-Gauge 304 Stainless Steel Construction

Every part of this system is made from 304 stainless steel, with the tubing specified at 16 gauge. All bends are mandrel formed to keep the tube diameter consistent through each turn. American Racing Headers states that the system is manufactured entirely in the USA and never outsourced.

The headers use 3/8 inch thick laser-cut flanges, which the manufacturer specifies for a warp-free seal at the cylinder head. The inlets are hand ported and TIG welded. Primary tube routing was optimized to clear the tight confines of the GT350's chassis while keeping the runners efficient.

Performance and Benefits

The headers pair 1 7/8 inch primary tubes with 3 inch collectors to improve exhaust flow from the 5.2L V8. Inside, they use the same scavenger collector and directional spike design that American Racing Headers applies across its performance header line. Downstream, the exhaust passes through an X-pipe and mid section before reaching the mufflers.

The sound of the system comes from American Racing Headers' own mufflers, which are designed for strong flow. Their tone was refined through extensive dyno testing at the company's facility and years of on-road tuning, with the goal of a traditional muscle car exhaust note. This version uses Pure Thunder mufflers and omits resonators. Because the tailpipes join the original GT350 tips, the car keeps its stock Shelby look at the rear while producing the ARH exhaust note.

Installation

  • Uses the factory exhaust hangers, which the manufacturer says allows the system to mount with minimal effort
  • Tailpipes are designed to connect to the existing factory GT350 exhaust tips
  • Intended for off-road use only

Why You Need This

  • Manufacturer-stated gains of 31 rwhp and 18 lb-ft of torque for the complete headers-back system on the GT350
  • Replaces the entire exhaust with a single matched system rather than piecing components together
  • 304 stainless steel construction with 3/8 inch flanges for long-term durability and a reliable header seal
  • Reuses the factory polished tips, so the rear of the car keeps its original Shelby appearance
  • Mounts on factory hangers for a more direct installation
  • Made in the USA by a manufacturer specializing in Ford exhaust systems

Vehicle Fitment

  • 2015-2020 Ford Mustang GT350
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.