{"product_id":"american-racing-2015-2020-shelby-gt350-2-x-3-catted-system-with-pure-thunder-mufflers-full-system-no-resonators-160204","title":"American Racing 2015-2020 Shelby GT350 2\" x 3\" Catted System with Pure Thunder Mufflers (Full System No Resonators) 160204","description":"\u003cp\u003eThe American Racing Headers 160204 is a complete catted exhaust system for the 2015-2020 Shelby GT350 Mustang. It runs from the headers back and includes high-flow catalytic converters, mid-tubes, an X-pipe, mufflers, and tailpipes. The listing title calls this configuration a 2-inch by 3-inch catted system with Pure Thunder mufflers and no resonators. The system is built in the USA from 16-gauge 304 stainless steel, and the tubing is mandrel bent to clear the tight packaging of the GT350 chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e American Racing Headers states a gain of 31 rear wheel horsepower (RWHP) and 18 lb-ft of torque over the GT350's 526 HP stock rating with its full system of headers, high-flow cats, mid-tube, X-pipe, and tailpipes. The manufacturer does not give the specific test conditions.\u003c\/p\u003e\n\u003cp\u003eThe system is designed to increase output from the 5.2L V8 and give the car the ARH exhaust note while keeping its factory appearance. The tailpipes connect to the original polished stainless steel GT350 tips, and installation uses the factory hangers. It suits owners who want a single, matched header-back package in place of separate components. American Racing Headers states that all of its exhaust systems are for off-road use only.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete header-back system: headers, catalytic converters, mid-tube section, X-pipe, mufflers, and tailpipes\u003c\/li\u003e\n\u003cli\u003eListed as a 2-inch x 3-inch catted configuration with Pure Thunder mufflers and no resonators\u003c\/li\u003e\n\u003cli\u003eMade entirely of 304 stainless steel; system tubing specified as 16-gauge\u003c\/li\u003e\n\u003cli\u003eMandrel-bent construction shaped for the GT350 chassis\u003c\/li\u003e\n\u003cli\u003eHeaders use 1 7\/8-inch primary tubes and 3-inch collectors\u003c\/li\u003e\n\u003cli\u003eMerge collectors with scavenger spikes (directional spike design)\u003c\/li\u003e\n\u003cli\u003ePrimary tube routing optimized for fit and performance\u003c\/li\u003e\n\u003cli\u003eHand-ported, TIG-welded header inlets\u003c\/li\u003e\n\u003cli\u003e3\/8-inch thick laser-cut flanges intended to seal without warping\u003c\/li\u003e\n\u003cli\u003eCatalytic converters use a 200-cell metallic substrate\u003c\/li\u003e\n\u003cli\u003eARH-exclusive mufflers developed through dyno testing and on-road tuning\u003c\/li\u003e\n\u003cli\u003eConnects to the factory GT350 polished stainless steel exhaust tips\u003c\/li\u003e\n\u003cli\u003eMounts using the factory hangers\u003c\/li\u003e\n\u003cli\u003e100 percent made in the USA, never outsourced\u003c\/li\u003e\n\u003cli\u003eOff-road use only, per the manufacturer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUSA-Made 16-Gauge 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eEvery part of this system is fabricated from 304 stainless steel, and the tubing is specified as 16-gauge. American Racing Headers mandrel bends the tubing, which holds a consistent diameter through each bend, and routes it to fit within the confined underbody of the GT350. The manufacturer builds the system entirely in the USA and does not outsource production.\u003c\/p\u003e\u003cp\u003eAt the cylinder heads, the headers use 3\/8-inch thick laser-cut flanges, which are meant to stay flat and maintain a warp-free seal. The inlets are hand ported and TIG welded. The primary tubes measure 1 7\/8 inches and are routed for both fitment and performance. They feed 3-inch merge collectors fitted with ARH's scavenger collector design and directional spike. ARH uses these same internal features across its maximum-performance header line.\u003c\/p\u003e\u003cp\u003eThe catalytic converters in this catted version use a 200-cell metallic substrate, which ARH selected for durability.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe headers, collectors, and high-flow converters are designed to pull more airflow out of the 5.2L V8. ARH credits the complete system with 31 rear wheel horsepower and 18 lb-ft of torque over the stock 526 HP rating.\u003c\/p\u003e\u003cp\u003eThe sound comes mainly from ARH's own mufflers. The company developed them for flow and refined their tone through dyno-facility testing and years of on-road tuning, aiming for a traditional muscle car sound. The X-pipe and mid-section sit between the converters and mufflers. The tailpipes route the exhaust back to the factory tips, so the rear of the car keeps its original Shelby look while producing the ARH exhaust note.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe system mounts with the factory exhaust hangers, which the manufacturer says keeps installation effort to a minimum.\u003c\/li\u003e\n\u003cli\u003eThe tailpipes are designed to connect to the existing factory GT350 polished stainless steel tips, so the original tips are reused.\u003c\/li\u003e\n\u003cli\u003eAmerican Racing Headers states that all of its exhaust systems are intended for off-road use only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou get headers, converters, X-pipe, mid-section, mufflers, and tailpipes as one matched system instead of piecing components together.\u003c\/li\u003e\n\u003cli\u003eThe manufacturer states gains of 31 RWHP and 18 lb-ft of torque over the stock GT350.\u003c\/li\u003e\n\u003cli\u003eThe 304 stainless steel construction, 16-gauge tubing, and 3\/8-inch flanges are built for long-term durability.\u003c\/li\u003e\n\u003cli\u003eThe factory polished stainless tips are retained, so the GT350 keeps its stock rear appearance.\u003c\/li\u003e\n\u003cli\u003eReusing the factory hangers simplifies mounting the system.\u003c\/li\u003e\n\u003cli\u003eThis catted version includes 200-cell metallic substrate converters for builds that need catalytic converters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2020 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHeaders with 1 7\/8-inch primaries and 3-inch collectors\u003c\/li\u003e\n\u003cli\u003eHigh-flow catalytic converters (200-cell metallic substrate)\u003c\/li\u003e\n\u003cli\u003eMid-tube section\u003c\/li\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eARH mufflers\u003c\/li\u003e\n\u003cli\u003eTailpipes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68304936009913,"sku":"ARH-160204","price":4572.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/GT_350_Full_System_e9ae2838-5105-4305-a3a4-6fbc60dd28c9.png?v=1794430320","url":"https:\/\/engmustangs.com\/products\/american-racing-2015-2020-shelby-gt350-2-x-3-catted-system-with-pure-thunder-mufflers-full-system-no-resonators-160204","provider":"ENG Mustangs","version":"1.0","type":"link"}