American Racing Headers

American Racing 2015-2020 Shelby GT350 1-7/8" x 3" Catted System with Pure Thunder Mufflers (Full System No Resonators) 160202

$4,446.58
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The American Racing Headers 160202 is a complete catted exhaust system for the 2015-2020 Shelby GT350 Mustang, running from the headers back to the factory tips. It pairs 1-7/8-inch primary headers that merge into 3-inch collectors with ARH high performance catalytic converters, a mid section, an X-pipe, ARH mufflers, and tailpipes that connect to the original GT350 polished stainless steel tips. This version is the full system configuration without resonators, built around the ARH muffler that the title identifies as Pure Thunder.

Manufacturer-stated gains: American Racing Headers states a gain of 31 rear wheel horsepower (RWHP) and 18 lb-ft of torque over the GT350's 526 hp stock rating. The source does not specify the test conditions, the tune used, or whether the figures were recorded with the catted or non-catted version of the system.

The system is built for GT350 owners who want more output and a more aggressive exhaust note from the 5.2L V8 while keeping the factory tip appearance. American Racing Headers builds the entire system in the USA from 16-gauge 304 stainless steel, using mandrel bends routed to clear the tight GT350 chassis, and it hangs from the factory hangers. The manufacturer states that all of its exhaust systems are intended for off-road use only.

Key Features

  • Complete system: headers, high flow catalytic converters, mid-tube section, X-pipe, mufflers, and tailpipes
  • 1-7/8-inch primary tubes feeding 3-inch collectors
  • Catted configuration with 200 cell metallic substrate catalytic converters
  • Full system layout without resonators
  • ARH-exclusive mufflers developed through dyno testing and on-road tuning
  • Merge collectors with scavenger spikes (directional spike) inside the headers
  • Primary tube routing optimized for fitment and performance
  • Flanges laser cut from 3/8-inch thick material to resist warping and hold a seal
  • Inlets that are ported by hand and joined with TIG welds
  • Constructed entirely from 16-gauge 304 stainless steel, mandrel bent
  • Tailpipes connect to the factory GT350 polished stainless steel exhaust tips
  • Mounts using the factory exhaust hangers
  • 100% made in the USA; manufacturing is never outsourced
  • Manufacturer designates the system for off-road use only

16-Gauge 304 Stainless Steel, Made in the USA

Every section of this system, from the header primaries to the tailpipes, is formed from 16-gauge 304 stainless steel. The tubing is mandrel bent, which maintains a consistent diameter through each bend, and the routing was laid out to fit within the close quarters of the GT350 chassis. American Racing Headers produces the system entirely in the USA and states that it does not outsource its manufacturing.

At the cylinder head, the headers use flanges laser cut from 3/8-inch thick stock, a thickness chosen to keep the flange flat and sealing over repeated heat cycles. The inlets are hand ported and TIG welded. The catalytic converters use a 200 cell metallic substrate, which the manufacturer selected for durability.

Performance and Benefits

The 1-7/8-inch primaries and 3-inch collectors are sized to pull exhaust efficiently from the GT350's 5.2L V8. Inside the headers, ARH uses the same merge collector and scavenger spike design found across its performance header line, and the headers feed directly into the ARH high performance catalytic converters, mid section, and X-pipe.

The exhaust tone is defined by ARH's own mufflers, which were designed with flow in mind and refined through testing on the company's dyno and years of street tuning. ARH describes the result as a classic muscle car note. Because the tailpipes plug into the original polished stainless tips, the rear of the car keeps its factory Shelby look while producing the ARH sound.

Installation

  • The system hangs from the factory exhaust hangers, which the manufacturer says allows it to be mounted with minimal effort
  • The tailpipes are designed to connect to the existing GT350 exhaust tips, so the factory tips are reused
  • The manufacturer states this system is for off-road use only

Why You Need This

  • Replaces the GT350 exhaust from the headers back with a single matched system rather than separate components
  • Manufacturer-stated gains of 31 RWHP and 18 lb-ft of torque
  • Retains catalytic converters, using 200 cell metallic substrate units chosen for durability
  • Keeps the factory polished stainless tips for an original appearance at the rear
  • 16-gauge 304 stainless construction with 3/8-inch flanges built for long service
  • Uses the factory hangers, which simplifies mounting
  • Made entirely in the USA

Vehicle Fitment

  • 2015-2020 Ford Mustang GT350

What's Included

  • Headers with 1-7/8-inch primaries and 3-inch collectors
  • High flow catalytic converters (200 cell metallic substrate)
  • Mid-tube section
  • X-pipe
  • ARH mufflers
  • Tailpipes

Not included:

  • Exhaust tips; the system connects to and reuses the factory GT350 polished stainless steel tips
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.