{"product_id":"american-racing-2015-2017-mustang-gt-1-7-8-x-3-catted-x-exhaust-system-w-pure-thunder-mufflers","title":"American Racing 2015-2017 Mustang GT 1-7\/8\" x 3\" Catted X Exhaust System w\/ Pure Thunder Mufflers","description":"\u003cp\u003eThis American Racing Headers exhaust system is a complete catted X-pipe setup for the 2015-2017 Mustang GT. It pairs 1-7\/8 inch primaries with 3 inch tubing that runs back to the rear axle, where it connects to the company's Pure Thunder Series axle-back mufflers. The system is built in the USA from aircraft-quality T304 stainless steel. The tubing is mandrel bent and fully TIG welded.\u003c\/p\u003e\n\u003cp\u003eAmerican Racing Headers designs the system to be configured for a wide range of builds. Depending on the primary and collector sizes chosen, the manufacturer says it can serve anything from an unmodified car to one making more than 1000 RWHP. The same company supplies factory header systems for the Ford Cobra Jet Mustang, Dodge Drag Pack, and Chevrolet COPO Camaro. For S550 GT owners who want a stainless, catted, header-back system from one source with a tuned muffler package, this is a well-matched option.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete catted X-pipe exhaust system for the 2015-2017 Mustang GT\u003c\/li\u003e\n\u003cli\u003e1-7\/8 inch primary tube size\u003c\/li\u003e\n\u003cli\u003e3 inch exhaust tubing routed to the rear axle\u003c\/li\u003e\n\u003cli\u003eFinished with Pure Thunder Series axle-back mufflers\u003c\/li\u003e\n\u003cli\u003eAircraft-quality T304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing with 049 wall thickness\u003c\/li\u003e\n\u003cli\u003eHand ported and fully TIG welded\u003c\/li\u003e\n\u003cli\u003e100% made in the USA by American Racing Headers\u003c\/li\u003e\n\u003cli\u003eManufacturer states the system platform supports builds from stock up to over 1000 RWHP, depending on primary and collector size\u003c\/li\u003e\n\u003cli\u003ePlatform is offered with 1-3\/4 inch, 1-7\/8 inch, or 2 inch primaries (2 inch intended for max-effort racing) and collectors up to 3-1\/2 inch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUSA-Made T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eAmerican Racing Headers builds this system in the USA from aircraft-quality T304 stainless steel. The tubing is mandrel bent, which keeps a consistent diameter through each bend. Every joint is TIG welded, and the manufacturer describes the components as hand ported.\u003c\/p\u003e\u003cp\u003eThe wall thickness is specified as 049. American Racing Headers uses this number to indicate tubing gauge, and a higher figure means thicker material, so 065 tubing would be heavier walled than 049. The company races with its own products and supplies factory header systems for the Ford Cobra Jet Mustang, Dodge Drag Pack, and Chevrolet COPO Camaro.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRunning 3 inch tubing all the way to the rear axle gives the Coyote V8 a large-diameter path from the 1-7\/8 inch primaries through the catted X-pipe. The Pure Thunder Series axle-back sits at the end of the system. American Racing Headers says these mufflers produce a deep, full exhaust note and are tuned to avoid high-pitched raspiness and drone inside the cabin.\u003c\/p\u003e\u003cp\u003eThe system is part of a modular platform, so primary and collector sizing can be matched to the power level of the build. The manufacturer states the platform suits everything from a bone-stock car to setups exceeding 1000 RWHP. This version uses the 1-7\/8 inch primary size.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAmerican Racing Headers states that its systems are designed for easy installation, drawing on decades of fabrication and racing experience.\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou get a complete header-back stainless system from a single manufacturer instead of combining parts from different brands.\u003c\/li\u003e\n\u003cli\u003eThe system retains catalytic converters in an X-pipe layout.\u003c\/li\u003e\n\u003cli\u003eThe Pure Thunder Series axle-back is tuned by the manufacturer to avoid raspiness and cabin drone, which suits a car that sees regular street use.\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel, mandrel-bent tubing, and full TIG welding are built for long-term durability.\u003c\/li\u003e\n\u003cli\u003eThe platform's sizing range lets the exhaust grow with the build, from stock power to over 1000 RWHP.\u003c\/li\u003e\n\u003cli\u003eThe products are made in the USA by the same company that supplies factory header systems for Cobra Jet, Drag Pack, and COPO race cars.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e","brand":"American Racing Headers","offers":[{"title":"Default Title","offer_id":68304935485625,"sku":"ARH-MTC5-15178300FSWC","price":3994.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/mtc5-15134300fshnc_662fc065-ebcb-4399-bdd2-46cdff3ee806.jpg?v=1794430318","url":"https:\/\/engmustangs.com\/products\/american-racing-2015-2017-mustang-gt-1-7-8-x-3-catted-x-exhaust-system-w-pure-thunder-mufflers","provider":"ENG Mustangs","version":"1.0","type":"link"}