{"product_id":"afe-twisted-steel-409-stainless-steel-short-tube-header-w-titanium-coating-ford-mustang-11-17-v6-3-7l-48-43031-t","title":"AFE Twisted Steel 409 Stainless Steel Short Tube Header w\/ Titanium Coating (Ford Mustang 11-17 V6-3.7L) - 48-43031-T","description":"\u003cp\u003eThe aFe Twisted Steel short tube header, part number 48-43031-T, is a shorty header built for the 3.7L V6 Mustang. It replaces the factory exhaust manifolds with 1-5\/8 inch mandrel-bent 409 stainless steel primaries that feed 3-to-1 mitered merge collectors, and it has a Titanium Ceramic Coat finish. aFe designed the header with computer-aided design tools to match factory mounting points closely, so it installs as a direct bolt-on without cutting or modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Up to +14 horsepower and +15 lb-ft of torque, as measured by aFe on its in-house dyno.\u003c\/p\u003e\n\u003cp\u003eFor owners of 2011-2017 V6 Mustangs looking to get more out of the 3.7L, this header targets the restriction at the head of the exhaust system. aFe reports gains of up to 14 horsepower and 15 lb-ft of torque on its in-house dyno, along with improved throttle response. The coating is intended to lower header surface and underhood temperatures. Gaskets and lower outlet hardware are included, which makes it a practical exhaust upgrade for enthusiasts who do their own work.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1-5\/8 inch mandrel-bent 409 stainless steel tubing\u003c\/li\u003e\n\u003cli\u003eTitanium Ceramic Coat finish to reduce exterior header surface temperatures and engine compartment temperatures\u003c\/li\u003e\n\u003cli\u003e3-to-1 mitered merge collectors designed to reduce turbulence and raise exhaust velocity\u003c\/li\u003e\n\u003cli\u003eFactory-style laser-cut, machined mild steel flanges for a secure, leak-free seal\u003c\/li\u003e\n\u003cli\u003e100% MIG-welded construction\u003c\/li\u003e\n\u003cli\u003eDeveloped with computer-aided design technology for close-tolerance, factory-style fitment\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on design with no cutting or modifications required\u003c\/li\u003e\n\u003cli\u003eGaskets and lower outlet hardware included\u003c\/li\u003e\n\u003cli\u003eShort tube (shorty) header design\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 48-43031-T\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 409 Stainless Steel with Titanium Ceramic Coat\u003c\/h3\u003e\u003cp\u003eaFe builds the primaries from 1-5\/8 inch 409 stainless steel tubing, mandrel-bent to keep the tube diameter consistent through each bend. The material was chosen for strength and durability, and every joint is MIG-welded across the whole assembly.\u003c\/p\u003e\u003cp\u003eThe head flanges are laser-cut, machined mild steel in a factory-style pattern. They are designed to seal securely against the cylinder head and prevent leaks. aFe used computer-aided design to set the header geometry, aiming for close-tolerance fitment that lines up with the factory mounting locations.\u003c\/p\u003e\u003cp\u003eThe Titanium Ceramic Coat finish is more than a cosmetic choice. aFe states it lowers the outside surface temperature of the headers, which also brings down engine compartment temperatures, and that it improves overall header efficiency.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eEach bank uses a 3-to-1 mitered merge collector that joins the three primaries. aFe says this reduces turbulence and increases exhaust velocity, which results in more horsepower and torque and sharper throttle response.\u003c\/p\u003e\u003cp\u003eOn aFe's in-house dyno, the header made up to 14 additional horsepower and 15 additional lb-ft of torque on the 3.7L V6. The ceramic coating also keeps more heat in the header and less in the engine bay, and aFe credits it with improving header efficiency.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a direct bolt-on system\u003c\/li\u003e\n\u003cli\u003eNo cutting or modifications required\u003c\/li\u003e\n\u003cli\u003eGaskets and lower outlet hardware are included for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer-measured gains of up to 14 horsepower and 15 lb-ft of torque over the factory setup on the 3.7L V6\u003c\/li\u003e\n\u003cli\u003e3-to-1 mitered merge collectors intended to improve exhaust velocity and throttle response\u003c\/li\u003e\n\u003cli\u003eTitanium Ceramic Coat finish helps reduce underhood heat\u003c\/li\u003e\n\u003cli\u003e409 stainless steel tubing and fully MIG-welded construction for long-term durability\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment with included gaskets and lower outlet hardware, so no fabrication is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2017 Ford Mustang V6 (3.7L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTwisted Steel short tube headers with Titanium Ceramic Coat\u003c\/li\u003e\n\u003cli\u003eGaskets\u003c\/li\u003e\n\u003cli\u003eLower outlet hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":68304701391033,"sku":"AFE48-43031-T","price":646.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/48-43031-t_1.jpg?v=1794374978","url":"https:\/\/engmustangs.com\/products\/afe-twisted-steel-409-stainless-steel-short-tube-header-w-titanium-coating-ford-mustang-11-17-v6-3-7l-48-43031-t","provider":"ENG Mustangs","version":"1.0","type":"link"}