The aFe Twisted Steel short tube header, part number 48-43031-T, is a shorty header built for the 3.7L V6 Mustang. It replaces the factory exhaust manifolds with 1-5/8 inch mandrel-bent 409 stainless steel primaries that feed 3-to-1 mitered merge collectors, and it has a Titanium Ceramic Coat finish. aFe designed the header with computer-aided design tools to match factory mounting points closely, so it installs as a direct bolt-on without cutting or modification.
Manufacturer-stated gains: Up to +14 horsepower and +15 lb-ft of torque, as measured by aFe on its in-house dyno.
For owners of 2011-2017 V6 Mustangs looking to get more out of the 3.7L, this header targets the restriction at the head of the exhaust system. aFe reports gains of up to 14 horsepower and 15 lb-ft of torque on its in-house dyno, along with improved throttle response. The coating is intended to lower header surface and underhood temperatures. Gaskets and lower outlet hardware are included, which makes it a practical exhaust upgrade for enthusiasts who do their own work.
Key Features
- 1-5/8 inch mandrel-bent 409 stainless steel tubing
- Titanium Ceramic Coat finish to reduce exterior header surface temperatures and engine compartment temperatures
- 3-to-1 mitered merge collectors designed to reduce turbulence and raise exhaust velocity
- Factory-style laser-cut, machined mild steel flanges for a secure, leak-free seal
- 100% MIG-welded construction
- Developed with computer-aided design technology for close-tolerance, factory-style fitment
- Direct bolt-on design with no cutting or modifications required
- Gaskets and lower outlet hardware included
- Short tube (shorty) header design
- Manufacturer part number 48-43031-T
Mandrel-Bent 409 Stainless Steel with Titanium Ceramic Coat
aFe builds the primaries from 1-5/8 inch 409 stainless steel tubing, mandrel-bent to keep the tube diameter consistent through each bend. The material was chosen for strength and durability, and every joint is MIG-welded across the whole assembly.
The head flanges are laser-cut, machined mild steel in a factory-style pattern. They are designed to seal securely against the cylinder head and prevent leaks. aFe used computer-aided design to set the header geometry, aiming for close-tolerance fitment that lines up with the factory mounting locations.
The Titanium Ceramic Coat finish is more than a cosmetic choice. aFe states it lowers the outside surface temperature of the headers, which also brings down engine compartment temperatures, and that it improves overall header efficiency.
Performance and Benefits
Each bank uses a 3-to-1 mitered merge collector that joins the three primaries. aFe says this reduces turbulence and increases exhaust velocity, which results in more horsepower and torque and sharper throttle response.
On aFe's in-house dyno, the header made up to 14 additional horsepower and 15 additional lb-ft of torque on the 3.7L V6. The ceramic coating also keeps more heat in the header and less in the engine bay, and aFe credits it with improving header efficiency.
Installation
- Designed as a direct bolt-on system
- No cutting or modifications required
- Gaskets and lower outlet hardware are included for installation
Why You Need This
- Manufacturer-measured gains of up to 14 horsepower and 15 lb-ft of torque over the factory setup on the 3.7L V6
- 3-to-1 mitered merge collectors intended to improve exhaust velocity and throttle response
- Titanium Ceramic Coat finish helps reduce underhood heat
- 409 stainless steel tubing and fully MIG-welded construction for long-term durability
- Bolt-on fitment with included gaskets and lower outlet hardware, so no fabrication is needed
Vehicle Fitment
- 2011-2017 Ford Mustang V6 (3.7L)
What's Included
- Twisted Steel short tube headers with Titanium Ceramic Coat
- Gaskets
- Lower outlet hardware