aFe

AFE MACH Force-Xp Cat-Back Exhaust w/ Black Tip (2015-2021 Mustang) - 49-33084-B

$1,461.00
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The aFe MACH Force-Xp cat-back, part number 49-33084-B, is a complete exhaust system for the S550-generation Mustang. aFe developed and tested it on the turbocharged 2.3L four-cylinder EcoBoost. Its main sections are built from mandrel-bent 304 stainless steel tubing that steps from 3 inches down to 2-1/2 inches. A pair of high-flow mufflers and dual 4-inch stainless tips finish the system. aFe's goal was to improve exhaust flow and output across the power band while giving the car a more aggressive voice.

Manufacturer-stated gains: aFe reports gains of +16 horsepower and +17 lb-ft of torque, measured on its in-house dyno. The test car was a 2015 Ford Mustang EcoBoost with the 2.3L I4, equipped with aFe part number 48-33017-HC.

The system is designed to grow with your build. Clamp-on reduction pipes let it bolt to the factory exhaust connections. Remove them, and the full 3-inch system lines up with aFe's Twisted Steel downpipes, offered as 48-33017-HC or 48-33017-HN. Other details include a mitered 2-to-1 Y-pipe, fully MIG-welded construction, and band clamps that seal all the way around each joint. Mounting hardware is included, which makes this a practical choice for EcoBoost owners who want a stainless cat-back now and room for downpipe upgrades later.

Key Features

  • Mandrel-bent 304 stainless steel tubing, 3 inches stepping down to 2-1/2 inches
  • Dual high-flow mufflers
  • Y-pipe with a 2-to-1 mitered split that eliminates the dead zone found in formed collectors
  • Dual 4-inch diameter, double-wall, 304 stainless steel tips with a laser-etched aFe Power logo
  • 100 percent MIG-welded construction
  • Band clamps that provide a full 360-degree sealing surface
  • Removable clamp-on reduction pipes for connection to the factory exhaust
  • Full 3-inch configuration compatible with aFe downpipes 48-33017-HC or 48-33017-HN once the reduction pipes are removed
  • Installation hardware included

Mandrel-Bent 304 Stainless Steel Construction

The tubing is 304 stainless steel, mandrel-bent so the pipe keeps its full diameter through every bend rather than crimping at the curves. All joints are MIG-welded, which aFe specifies for strength and long-term durability.

Sections are joined with band clamps instead of conventional U-bolt clamps. Band clamps wrap the entire joint, giving a 360-degree sealing surface that helps prevent leaks. The dual 4-inch tips are also 304 stainless steel. They use double-wall construction and carry a laser-etched aFe logo.

Performance and Benefits

Flow was a central focus of the design. Instead of a formed collector, the Y-pipe uses a mitered 2-to-1 split. aFe notes that formed collectors tend to leave dead space, which creates turbulence and restricts flow, and the mitered junction avoids that.

The two free-flowing mufflers are tuned to absorb high-pitched tones. The result is a strong, aggressive exhaust note without restricting the engine's available horsepower and torque.

Out of the box, the reduction pipes adapt the system to the stock connections. If you later fit aFe's 48-33017-HC or 48-33017-HN Twisted Steel downpipes, you can remove the reducers and run the full 3-inch system. aFe says this combination adds flow and performance.

Installation

  • Hardware needed to install the system is included
  • Clamp-on reduction pipes allow the system to connect to the factory exhaust connections
  • For use with aFe 48-33017-HC or 48-33017-HN downpipes, remove the reduction pipes to run the full 3-inch system

Why You Need This

  • aFe documented dyno gains of +16 horsepower and +17 lb-ft of torque on a 2.3L EcoBoost Mustang
  • Mandrel-bent 304 stainless tubing and full MIG welding are built for durability
  • Dual high-flow mufflers produce an aggressive tone while filtering out high-pitched frequencies
  • The mitered Y-pipe eliminates collector dead space to improve flow
  • The system works with the factory exhaust connections now and adapts to aFe downpipes later
  • Band clamps provide a full 360-degree seal at each joint

Vehicle Fitment

  • 2015-2021 Ford Mustang

What's Included

  • Mandrel-bent 304 stainless steel cat-back piping
  • Y-pipe with 2-to-1 mitered split
  • Dual high-flow mufflers
  • Dual 4-inch double-wall 304 stainless steel tips
  • Clamp-on reduction pipes
  • Band clamps
  • Installation hardware
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.