aFe

AFE MACH Force-Xp Axle-Back Dual Exhaust w/ Polished Tips (2015-2026 Mustang Ecoboost Non Active / V6) - 49-43085-P

$858.00
Shipping calculated at checkout.
  • Fitment guaranteed
  • Ships in 1–3 business days
  • Secure checkout

The aFe MACH Force-Xp axle-back exhaust (part number 49-43085-P) replaces the rear section of the factory exhaust on 2.3L EcoBoost and 3.7L V6 Mustangs. It is built from 2-1/2 inch stainless steel tubing and uses dual high-flow mufflers. It finishes with a pair of 4 inch polished 304 stainless steel tips carrying laser-etched aFe branding.

aFe designed this system to improve performance across the power band while giving the Mustang a more aggressive exhaust note. The mufflers absorb high-pitched tones, and band clamps seal the joints. Installation hardware comes in the box. For owners of four-cylinder or V6 Mustangs who want a stronger sound and a more finished rear appearance from a bolt-on rear section, this axle-back is a practical choice. aFe engineers and manufactures it at its Corona, California facility.

Key Features

  • Axle-back exhaust design for the 2.3L EcoBoost and 3.7L V6 Mustang
  • 2-1/2 inch stainless steel tubing
  • Dual high-flow, free-flowing mufflers that absorb high-pitched tones
  • Aggressive exhaust sound
  • Engineered to improve performance across the power band
  • High-quality band clamps with a full 360-degree sealing surface for a leak-free connection
  • Dual 4 inch diameter high-luster polished 304 stainless steel tips
  • Laser-etched aFe logo on the tips
  • Installation hardware included
  • Engineered and manufactured in aFe's Corona, California facility
  • Manufacturer part number 49-43085-P

Stainless Steel Tubing and Polished 304 Stainless Tips

The MACH Force-Xp axle-back is built around 2-1/2 inch stainless steel tubing that runs from the axle back to the tips. Each side ends in a 4 inch diameter tip made from 304 stainless steel and polished to a high-luster finish. The tips carry a laser-etched aFe logo rather than a stamped or stuck-on badge.

Instead of relying on conventional slip-fit connections, aFe uses high-quality band clamps at the joints. These clamps provide a complete 360-degree sealing surface, which helps keep the system free of leaks. aFe engineers and builds all of its exhaust systems in-house at its manufacturing facility in Corona, California.

Performance and Benefits

The system uses two free-flowing mufflers that are tuned to absorb high-pitched tones. The intent is a more powerful, aggressive exhaust note without harsh, raspy frequencies. aFe states that the high-flow design improves performance across the power band and frees up the engine's available horsepower and torque. The manufacturer does not publish specific gain figures.

At the rear, the dual 4 inch polished tips give the car a more aggressive appearance and fill out the rear valance more visibly than smaller outlets.

Installation

  • Hardware is included with the system, which aFe describes as allowing a hassle-free installation
  • Band clamps are used at the connections

Why You Need This

  • Replaces the factory axle-back with stainless steel tubing and dual high-flow mufflers on 2.3L EcoBoost and 3.7L V6 Mustangs
  • Delivers a more aggressive exhaust sound, with mufflers designed to absorb high-pitched tones
  • Engineered by aFe to improve performance across the power band
  • Band clamps provide a 360-degree seal to help prevent exhaust leaks
  • Polished 304 stainless steel 4 inch tips with laser-etched branding improve the look of the rear of the car
  • Ships with the hardware needed for installation

Vehicle Fitment

  • 2015-2026 Ford Mustang EcoBoost / V6 (2.3L, 3.7L)

What's Included

  • MACH Force-Xp axle-back exhaust with dual high-flow mufflers
  • Dual 4 inch polished 304 stainless steel tips
  • Installation hardware
Shipping & returns

In-stock parts ship in 1–3 business days. See our refund policy for return details.

Fitment & install help

Not sure it fits? Contact us with your year, trim and options before ordering.