{"title":"S650 Mustang X-Pipes \u0026 Mid-Pipes","description":null,"products":[{"product_id":"corsa-2015-2026-ford-mustang-gt-dark-horse-3-double-h-pipe-with-stainless-steel-construction-5-0l","title":"CORSA 2015-2026 Ford Mustang GT\/Dark Horse 3\" Double H-Pipe with Stainless Steel Construction (5.0L)","description":"\u003cp\u003eThe CORSA 3.0-inch Double H-Pipe replaces the factory mid-pipe section on the 5.0L Coyote-powered Ford Mustang GT, including the Dark Horse, from 2015 through 2026. It is designed to work as part of a complete CORSA exhaust system, giving the V8 a more aggressive voice while keeping highway cruising free of drone.\u003c\/p\u003e\n\u003cp\u003eFor owners who already run an axle-back or plan a full exhaust build, this H-pipe is a straightforward way to raise the sound level and improve exhaust flow without welding or cutting. It suits drivers who want a noticeably stronger exhaust note that stays civil on long drives.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0-inch double H-pipe design for the 5.0L V8\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction\u003c\/li\u003e\n\u003cli\u003eEstimated 23.43% increase in exhaust flow, per CORSA (actual results may vary)\u003c\/li\u003e\n\u003cli\u003eAggressive sound through the gears with a distinct rumble at idle\u003c\/li\u003e\n\u003cli\u003eNo drone during cruise\u003c\/li\u003e\n\u003cli\u003eMoves an axle-back exhaust system up one sound level\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered and manufactured in Berea, Ohio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCORSA builds this H-pipe from premium stainless steel, chosen for its performance, appearance and contribution to the system's sound. Each pipe is made for specific vehicles to ensure correct fitment and performance.\u003c\/p\u003e\u003cp\u003eEvery unit is designed, engineered and manufactured by CORSA in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe double H-pipe layout increases exhaust flow by an estimated 23.43% according to CORSA, with actual results varying by vehicle. On the street, it delivers an aggressive, high-performance tone through the gears and a distinct rumble at idle.\u003c\/p\u003e\u003cp\u003ePaired with an axle-back system, it raises the overall sound by one level, while CORSA's design keeps the cabin free of drone at cruising speed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation; no welding needed\u003c\/li\u003e\n\u003cli\u003eIncludes the necessary hardware and detailed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds volume and character to an existing CORSA axle-back without introducing highway drone\u003c\/li\u003e\n\u003cli\u003eImproves exhaust flow over the factory mid-pipe section\u003c\/li\u003e\n\u003cli\u003eBolts on with no welding or fabrication\u003c\/li\u003e\n\u003cli\u003eBacked by a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang Dark Horse \/ GT (5.0L), Fastback\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L), Convertible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble H-pipe\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLimited lifetime warranty with proof of purchase, for as long as you own the vehicle. The exhaust must be installed on the specified vehicle for the warranty to remain valid.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68304222191801,"sku":"COR14502","price":614.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/Picture1.jpg?v=1794370743"},{"product_id":"mbrp-3-exhaust-resonator-delete-x-pipe-stainless-steel-2020-2022-shelby-gt500-2026-mustang-dark-horse-sc-s7219409","title":"MBRP 3\" Exhaust Resonator Delete X-Pipe - Stainless Steel (2020-2022 Shelby GT500 \/ 2026 Mustang Dark Horse SC) - S7219409","description":"\u003cp\u003eThe MBRP XP-Series 3-inch Resonator Delete X-Pipe replaces the factory resonator section on the 2020-2022 Shelby GT500 and the 2026 Mustang Dark Horse SC. It is mandrel-bent stainless steel and is designed to raise the sound level and attitude of these supercharged Mustangs.\u003c\/p\u003e\n\u003cp\u003eThe factory resonator restricts both sound and exhaust flow. Swapping it for this free-flowing X-pipe increases flow, removes weight and gives the car a more aggressive tone, all in one relatively simple modification.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch X-pipe that replaces the factory resonators\u003c\/li\u003e\n\u003cli\u003eMandrel-bent for maximum flow\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eReduces back pressure and increases exhaust flow\u003c\/li\u003e\n\u003cli\u003eLighter than the factory section and resonators\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary clamps\u003c\/li\u003e\n\u003cli\u003eNo welding or tuning required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent Stainless Steel\u003c\/h3\u003e\u003cp\u003eMBRP builds this X-pipe from stainless steel and mandrel-bends the tubing to keep its full diameter through every bend for maximum flow.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonators opens up exhaust flow and noticeably increases the sound level, while the X-pipe design gives these cars a more aggressive tone. It is also lighter than the factory parts it replaces.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires cutting the factory exhaust piping; after that, it is a bolt-in installation\u003c\/li\u003e\n\u003cli\u003eNo welding required\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eAll necessary clamps are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMuch more sound from a GT500 or Dark Horse SC\u003c\/li\u003e\n\u003cli\u003eBetter exhaust flow and less weight than the factory resonators\u003c\/li\u003e\n\u003cli\u003eSimple modification with no welding or tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2020-2022 Ford Mustang GT500\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang Dark Horse SC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWill NOT fit any other Mustang models beyond those listed above\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eAll necessary clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68304223928505,"sku":"MBRPS7219409","price":304.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_fb941d06-3b5c-4952-a7ad-f5cda0c32620.webp?v=1794435503"},{"product_id":"steeda-2015-2026-ford-mustang-gt-resonator-delete-h-pipe-with-304-stainless-steel-construction-direct-fit","title":"Steeda 2015-2026 Ford Mustang GT Resonator Delete H-Pipe with 304 Stainless Steel Construction (Direct-Fit)","description":"\u003cp\u003eThe Steeda Resonator Delete H-Pipe is a 304 stainless steel mid-pipe that takes the place of the factory resonator assembly on S550 and S650 Mustangs powered by the 5.0L Coyote V8. It is built from 2.5 inch mandrel-bent tubing and uses an H-style crossover design. It fits in the exhaust system downstream of the stock catalytic converters and upstream of the OEM mufflers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Steeda states gains of up to +2 hp and up to +2 lb-ft of torque. The manufacturer does not list specific test conditions for these figures.\u003c\/p\u003e\n\u003cp\u003eRemoving the resonator gives the exhaust a deeper, traditional muscle car tone, and the H-pipe layout is designed to build low-RPM torque compared to the factory resonator. It also cuts up to 6.5 pounds from the car. The pipe is intended for GT, Mach 1, and Bullitt models. It keeps the factory heat shields used on 2018 and newer GTs, works with virtually all aftermarket axle-back systems, and does not need a tune. That makes it a practical, budget-minded way to change the character of a Coyote-powered Mustang.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.5 inch diameter mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover design that replaces the factory resonator\u003c\/li\u003e\n\u003cli\u003e32 inch overall length\u003c\/li\u003e\n\u003cli\u003eUp to 6.5 lbs lighter than the factory setup\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated gains of up to +2 hp and up to +2 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eImproves low-end torque compared to the factory resonator\u003c\/li\u003e\n\u003cli\u003eDeep, traditional muscle car exhaust note\u003c\/li\u003e\n\u003cli\u003eRetains the factory exhaust heat shields on 2018 and newer GT models without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eFlush-fit band clamps allow the pipe to be shortened if needed and help prevent leaks common with expanded-end kits\u003c\/li\u003e\n\u003cli\u003eSupplied band clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually all aftermarket axle-back exhaust kits\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003cli\u003eIntended for Mustang GT, Bullitt, and Mach 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this H-pipe from 304 stainless steel. 409 stainless often develops surface rust, and aluminized mild steel can corrode all the way through, while 304 resists both. That makes it a good choice for cars driven year-round or in wet climates.\u003c\/p\u003e\u003cp\u003eThe 2.5 inch tubing is mandrel bent, so the pipe keeps a consistent diameter through each bend. The pipe joins the exhaust with flush-fit band clamps rather than expanded slip-fit ends. Steeda notes that this approach avoids the exhaust leaks common with expanded-end kits and also lets the installer trim the pipe to a shorter length when needed.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith the factory resonator removed and the H-style crossover in place, the exhaust develops a deeper, more traditional muscle car tone. Steeda states that the H design increases torque at lower RPM compared to the factory resonator. The manufacturer quotes up to +2 hp and up to +2 lb-ft of torque, and no tune is required.\u003c\/p\u003e\u003cp\u003eSwapping the resonator assembly for this pipe saves up to 6.5 pounds. Because it works with virtually all aftermarket axle-back kits, it can be added to an existing rear exhaust or used as one step in a staged exhaust build.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCutting of the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market\u003c\/li\u003e\n\u003cli\u003eThe H-pipe mounts downstream of the stock catalytic converters and ahead of the OEM mufflers\u003c\/li\u003e\n\u003cli\u003eFactory heat shields on 2018 and newer GT models can stay in place without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the pipe to be cut to a shorter length if needed\u003c\/li\u003e\n\u003cli\u003eThe supplied band clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003cli\u003eNo tune is required after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a deeper, traditional V8 exhaust tone from your Coyote-powered Mustang without replacing the entire system\u003c\/li\u003e\n\u003cli\u003eThe H-pipe layout targets low-RPM torque compared to the factory resonator\u003c\/li\u003e\n\u003cli\u003eIt removes up to 6.5 pounds from the car\u003c\/li\u003e\n\u003cli\u003e304 stainless steel resists the surface rust and rust-through seen with 409 stainless and aluminized steel\u003c\/li\u003e\n\u003cli\u003eOn 2018 and newer GTs, you can keep the factory heat shields without modifying them\u003c\/li\u003e\n\u003cli\u003eIt pairs with virtually all aftermarket axle-back kits\u003c\/li\u003e\n\u003cli\u003eNo tune is needed, and the supplied clamps let you return to the factory resonator if you choose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT \/ Mach 1 \/ Bullitt\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel resonator delete H-pipe\u003c\/li\u003e\n\u003cli\u003eBand clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304692084921,"sku":"SDA-555-3619","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3619_P04.jpg?v=1794436008"},{"product_id":"steeda-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-304-stainless-steel-construction-direct-fit","title":"Steeda 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with 304 Stainless Steel Construction (Direct-Fit)","description":"\u003cp\u003eThe Steeda Resonator Delete X-Pipe replaces the factory resonator section on 5.0L Coyote-powered S550 and S650 Mustangs. It is built from T-304 stainless steel using mandrel-bent 2.5-inch diameter tubing, and it mounts in the factory location between the stock catalytic converters and the stock mufflers. Removing the resonators and adding an X-style crossover changes the exhaust note to a more aggressive, race-inspired tone. Steeda also cites gains in output, flow, and weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Steeda states gains of up to +8 hp and up to +9.5 lb-ft of torque. The manufacturer notes that no tune is required. No further test conditions are specified.\u003c\/p\u003e\n\u003cp\u003eThis part suits GT, Bullitt, Mach 1, and Dark Horse owners who want a sharper sound and a measurable improvement without a tune. Steeda states it works with virtually all aftermarket axle-back systems, so it can pair with an existing or planned rear exhaust. On 2018 and newer GT models, it keeps the factory exhaust heat shields without modifying either the pipe or the shields. The band clamps also leave a path back to stock, because they allow the factory resonator to be reinstalled.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eT-304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.5-inch diameter tubing\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover with a smooth transition, which Steeda says creates more scavenging than traditional H-pipe designs\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated exhaust flow improvement of up to 20% over the factory resonator and H-pipe designs\u003c\/li\u003e\n\u003cli\u003eUp to +8 hp and up to +9.5 lb-ft of torque, per Steeda\u003c\/li\u003e\n\u003cli\u003eSheds up to 7 lb compared to the factory resonator section\u003c\/li\u003e\n\u003cli\u003e32-inch overall length\u003c\/li\u003e\n\u003cli\u003eFlush-fit band clamps allow the X-pipe to be shortened if needed\u003c\/li\u003e\n\u003cli\u003eClamp design helps prevent the exhaust leaks common with expanded-end kits\u003c\/li\u003e\n\u003cli\u003eRetains the factory exhaust heat shields on 2018 and newer GT models without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eInstalls between the factory catalytic converters and factory mufflers\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually all aftermarket axle-back exhaust kits\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this X-pipe from T-304 stainless steel tubing. According to the manufacturer, it will not develop the surface rust typical of 409 stainless steel. It also will not rust completely through the way aluminized mild steel pipes can. That matters for a component mounted low under the car, where it is exposed to moisture, road salt, and heat cycling.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent at a 2.5-inch diameter, so the pipe keeps a consistent cross-section through each bend. Instead of expanded slip-fit ends, the X-pipe uses flush-fit band clamps. Steeda says this approach prevents the exhaust leaks common with expanded-end kits. The same clamps also allow the pipe to be trimmed to a shorter length when needed.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe X-shaped crossover merges the two exhaust banks through a smooth transition. Steeda states this produces a stronger scavenging effect than a traditional H-pipe, which supports added power at high RPM. The manufacturer rates the design at up to 20% better exhaust flow than the factory resonator and H-pipe layouts. It also lists gains of up to 8 hp and 9.5 lb-ft of torque with no tune required.\u003c\/p\u003e\u003cp\u003eDeleting the resonators gives the Coyote V8 a more aggressive, race-inspired exhaust tone. The swap also removes up to 7 lb from the exhaust system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts between the factory catalytic converters and the factory mufflers\u003c\/li\u003e\n\u003cli\u003eCutting of the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the X-pipe to be shortened to suit the installation\u003c\/li\u003e\n\u003cli\u003eOn 2018 and newer GT models, the factory heat shields can stay in place without modifying the X-pipe or the shields\u003c\/li\u003e\n\u003cli\u003eNo tune is required after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory resonators for a more aggressive exhaust tone on a Coyote-powered Mustang\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated gains of up to 8 hp and 9.5 lb-ft without a tune\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel resists the surface rust seen on 409 stainless and the rust-through seen on aluminized steel\u003c\/li\u003e\n\u003cli\u003eRemoves up to 7 lb from the exhaust system\u003c\/li\u003e\n\u003cli\u003eKeeps the 2018 and newer factory heat shields without cutting or chiseling\u003c\/li\u003e\n\u003cli\u003eWorks with virtually all aftermarket axle-back systems, so it fits into a staged exhaust build\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT \/ Mach 1 \/ Dark Horse \/ Bullitt\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304692150457,"sku":"SDA-555-3618","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3618_P04.jpg?v=1794436009"},{"product_id":"steeda-304-stainless-resonator-delete-h-x-pipe-2015-2026-mustang-gt-555-3625","title":"Steeda 304 Stainless Resonator Delete H\/X-Pipe (2015-2026 Mustang GT) - 555-3625","description":"\u003cp\u003eThe Steeda 555-3625 is a resonator delete mid-pipe built from 304 stainless steel for the 5.0L Coyote-powered S550 and S650 Mustang. It replaces the factory resonator section with a hybrid H\/X layout, which Steeda also calls a Hex Pipe. A smooth transition and crossover are intended to combine the characteristics of an H-pipe and an X-pipe in one assembly. The tubing is 2.5 inch mandrel-bent, the overall length is 32 inches, and Steeda builds it in the USA to a patent-pending design.\u003c\/p\u003e\n\u003cp\u003eThe part is aimed at owners who want a more aggressive, race-inspired exhaust note and less weight without retuning the car. Steeda states that it removes up to 6 pounds and does not require a tune. It fits in the mid-pipe position, after the stock catalytic converters and before the stock mufflers, and works with virtually all aftermarket axle-back systems. Unlike many competing resonator deletes, it keeps the factory heat shields on 2018 and newer GT models with no cutting or modification of the shields. It suits GT, Bullitt, Mach 1, and Dark Horse owners building a lighter, louder exhaust in stages.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eU.S.-sourced T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli\u003e2.5 inch diameter mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eHybrid H\/X (Hex Pipe) design with a smooth transition and crossover section\u003c\/li\u003e\n\u003cli\u003ePatent-pending design\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003e32 inch overall length\u003c\/li\u003e\n\u003cli\u003eFlush-fit band clamps allow the pipe to be cut shorter if needed\u003c\/li\u003e\n\u003cli\u003eBand clamps help prevent the exhaust leaks common with expanded-end kits\u003c\/li\u003e\n\u003cli\u003eRetains the factory exhaust heat shields on 2018 and newer GT models\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003cli\u003eRemoves up to 6 lbs compared to the factory setup\u003c\/li\u003e\n\u003cli\u003eAggressive, race-inspired exhaust tone\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually all aftermarket axle-back exhaust kits\u003c\/li\u003e\n\u003cli\u003eSteeda part number 555-3625\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eU.S.-Sourced T-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this H\/X-pipe from T-304 stainless steel tubing sourced in the United States and mandrel-bent to a consistent 2.5 inch diameter. According to the manufacturer, 304 stainless will not develop the surface rust typical of 409 stainless, and it will not corrode through the way aluminized mild steel pipes eventually can. For a component that sits low under the car and takes road spray, salt, and heat cycling, that material choice matters for long-term durability.\u003c\/p\u003e\u003cp\u003eThe pipe connects with flush-fit band clamps instead of expanded slip-fit ends. Steeda notes that this joint style helps prevent the exhaust leaks often seen with expanded-end kits. It also lets you trim the pipe shorter where needed for fitment. The design is patent pending, and the part is manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe core of the design is the hybrid H\/X crossover. A smooth transition between the two banks is meant to deliver the benefits of both an H-pipe and an X-pipe in one part. With the factory resonator gone, the Coyote V8 takes on a noticeably more aggressive, race-inspired tone.\u003c\/p\u003e\u003cp\u003eRemoving the resonator also takes weight out of the car, with Steeda citing a reduction of up to 6 pounds. The pipe requires no tune, so it can be installed without changing the engine calibration.\u003c\/p\u003e\u003cp\u003eOn 2018 and newer GT models, the pipe was engineered to work with the factory heat shields as they are. Many competing resonator deletes require you to cut and expand the pipe to clear the OE shields, or to chisel the shields off. This one avoids both. It is also compatible with virtually all aftermarket axle-back systems, so it pairs easily with an existing or planned rear exhaust upgrade.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts in the mid-pipe location, downstream of the stock catalytic converters and upstream of the stock mufflers\u003c\/li\u003e\n\u003cli\u003eCutting the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market\u003c\/li\u003e\n\u003cli\u003eNo tune is required after installation\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the H\/X-pipe to be cut to a shorter length if needed for fitment\u003c\/li\u003e\n\u003cli\u003eFactory heat shields on 2018 and newer GT models can stay in place without cutting or chiseling\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled at a later date\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives the Coyote V8 a more aggressive, race-inspired exhaust tone by eliminating the factory resonator\u003c\/li\u003e\n\u003cli\u003eTakes up to 6 pounds out of the exhaust system\u003c\/li\u003e\n\u003cli\u003eRequires no tune, so the engine calibration stays as it is\u003c\/li\u003e\n\u003cli\u003eT-304 stainless tubing resists the surface rust of 409 stainless and the rust-through of aluminized steel\u003c\/li\u003e\n\u003cli\u003eKeeps the factory heat shields on 2018 and newer GT models without cutting or removal\u003c\/li\u003e\n\u003cli\u003eWorks with virtually all aftermarket axle-back kits for a staged exhaust build\u003c\/li\u003e\n\u003cli\u003eBand-clamp connections allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT \/ Mach 1 \/ Dark Horse \/ Bullitt\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304696180921,"sku":"SDA-555-3625","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/hex_pipe_8-6-25__15449.1754504883.jpg?v=1794436007"},{"product_id":"roush-2015-2026-ford-mustang-gt-resonator-delete-h-pipe-with-improved-sound-direct-fit","title":"ROUSH 2015-2026 Ford Mustang GT Resonator Delete H-Pipe with Improved Sound (Direct-Fit)","description":"\u003cp\u003eThe ROUSH Resonator Delete H-Pipe is a direct-fit mid-pipe assembly for the 5.0L V8 Mustang GT that removes the factory resonator from the exhaust path. In its place is a 2.5-inch H-pipe formed from mandrel-bent stainless steel. ROUSH engineered it from OEM vehicle CAD data so it lines up with the factory exhaust components. It works with both Ford and ROUSH Active Exhaust Systems.\u003c\/p\u003e\n\u003cp\u003eRemoving the factory resonator, which ROUSH describes as restrictive, gives the exhaust a deeper, more aggressive tone with a race-inspired growl. ROUSH says the H-pipe increases flow through the exhaust system and lowers back pressure. It also states that replacing the resonator with this part will not set a check engine light. For S550 and later Mustang GT owners who want a more assertive V8 sound for street or track use from a single bolt-in mid-pipe change, it is a practical upgrade backed by a 3-year limited warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete design that removes the factory resonator from the exhaust system\u003c\/li\u003e\n\u003cli\u003eH-pipe configuration with 2.5-inch tubing\u003c\/li\u003e\n\u003cli\u003eConstructed from corrosion-resistant, high-grade stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent flow and reduced back pressure\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered using OEM vehicle CAD data for accurate fitment\u003c\/li\u003e\n\u003cli\u003eDirect-fit design\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford and ROUSH Active Exhaust Systems\u003c\/li\u003e\n\u003cli\u003ePer ROUSH, replacing the factory resonator with this H-pipe will not trigger a check engine light\u003c\/li\u003e\n\u003cli\u003eProduces a deeper, more aggressive, race-inspired exhaust tone\u003c\/li\u003e\n\u003cli\u003eSuitable for street and track use\u003c\/li\u003e\n\u003cli\u003eBacked by a ROUSH 3-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 2.5-Inch Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eROUSH builds the H-pipe assembly from high-grade stainless steel chosen for corrosion resistance and long service life. That matters for a component that sits low under the car and is exposed to heat, moisture, and road debris.\u003c\/p\u003e\u003cp\u003eThe 2.5-inch tubing is mandrel-bent, so the pipe keeps a consistent diameter through each bend instead of crimping or flattening. ROUSH developed the assembly from OEM vehicle CAD data so it fits the factory exhaust mounting points and connections.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonator changes the character of the 5.0L V8 exhaust note. ROUSH describes the result as a deep, aggressive, race-inspired growl. Because the part is compatible with Ford and ROUSH Active Exhaust Systems, cars with active exhaust can keep using that feature after the swap.\u003c\/p\u003e\u003cp\u003eWith the resonator gone and mandrel-bent tubing in place, ROUSH says the H-pipe increases exhaust flow and reduces back pressure, which it links to improved horsepower and torque. ROUSH does not publish specific gain figures. The manufacturer also states that the change will not trigger a check engine light.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eROUSH describes installation as quick and simple.\u003c\/li\u003e\n\u003cli\u003eDirect-fit design engineered from OEM vehicle CAD data to match the factory exhaust layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a deeper, more aggressive V8 exhaust tone than the factory resonator allows.\u003c\/li\u003e\n\u003cli\u003eYour car has a Ford or ROUSH Active Exhaust System and you want a mid-pipe that stays compatible with it.\u003c\/li\u003e\n\u003cli\u003eYou prefer stainless steel construction for corrosion resistance and durability.\u003c\/li\u003e\n\u003cli\u003eYou want mandrel-bent tubing that keeps flow consistent and reduces back pressure.\u003c\/li\u003e\n\u003cli\u003eYou want a resonator delete that, per ROUSH, will not set a check engine light.\u003c\/li\u003e\n\u003cli\u003eYou want a manufacturer-backed part covered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\n\u003cli\u003e2015-2019 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eROUSH 3-year limited warranty\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68304696574137,"sku":"RSH422119","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c3d2b7c28f4e68e53a0cba3a279889dd.jpg?v=1794782234"},{"product_id":"corsa-2015-2026-ford-mustang-gt-dark-horse-5-0l-double-helixx-x-pipe-with-stainless-steel-construction-3-diameter","title":"CORSA 2015-2026 Ford Mustang GT\/Dark Horse 5.0L Double Helixx X-Pipe with Stainless Steel Construction (3\" Diameter)","description":"\u003cp\u003eThe CORSA Double Helixx X-Pipe is a 3-inch stainless steel mid-pipe for the 5.0L V8 Mustang GT and Dark Horse. It replaces the factory crossover section between the headers and the rear of the exhaust. Its double X-pipe layout is meant to raise exhaust volume and add character without the cruise drone that many owners want to avoid. Corsa Performance designs, engineers, and manufactures the part in Berea, Ohio, and engineers it specifically for the vehicles it is listed for.\u003c\/p\u003e\n\u003cp\u003eFor owners who already run an axle-back system, CORSA says this X-pipe moves the exhaust up one step on its sound scale. The result is a more pronounced rumble at idle and a more aggressive tone under acceleration, while staying quiet during steady-state cruising. The manufacturer rates the design at a 23.43 percent flow increase. It installs with bolts only, no welding, and comes with the hardware and instructions needed to complete the job.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble Helixx double X-pipe configuration\u003c\/li\u003e\n\u003cli\u003e3.0-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated flow increase of +23.43% (actual results not guaranteed and may vary)\u003c\/li\u003e\n\u003cli\u003eRaises sound by one CORSA sound level when paired with an axle-back exhaust system\u003c\/li\u003e\n\u003cli\u003eDistinct rumble at idle and aggressive sound through the gears\u003c\/li\u003e\n\u003cli\u003eEngineered for no drone during cruise\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eAll hardware and detailed instructions included\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in Berea, Ohio\u003c\/li\u003e\n\u003cli\u003eBacked by a CORSA Limited Lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e3-Inch Stainless Steel Double X-Pipe Construction\u003c\/h3\u003e\u003cp\u003eCORSA builds this X-pipe from premium stainless steel. The material is chosen to hold up over time in performance, sound, and appearance. The tubing is 3.0 inches in diameter throughout the double X-pipe design.\u003c\/p\u003e\u003cp\u003eThe design, engineering, and manufacturing all take place at CORSA's facility in Berea, Ohio. CORSA says each system is engineered around the specific characteristics of the vehicle it is built for, to achieve accurate fitment and the intended performance. For that reason, CORSA does not recommend or recognize installation on vehicles other than those specified.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe main purpose of the Double Helixx X-Pipe is to change the sound. Installed with an axle-back system, CORSA states it raises output by one sound level. Owners can expect a distinct rumble at idle and a more aggressive note as the car pulls through the gears. CORSA also says the system is engineered to avoid drone at cruising speed, which matters on a daily-driven or highway-driven Mustang.\u003c\/p\u003e\u003cp\u003eCORSA rates the X-pipe at a 23.43 percent increase in exhaust flow. The manufacturer notes that actual performance results are not guaranteed and may vary.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo welding needed\u003c\/li\u003e\n\u003cli\u003eAll required hardware is included\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions are included\u003c\/li\u003e\n\u003cli\u003eCORSA does not recommend or recognize installation on vehicles other than those the part is specified for\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds one step of exhaust volume to an existing axle-back setup without changing the rear section\u003c\/li\u003e\n\u003cli\u003eDelivers a stronger idle rumble and a more aggressive tone under acceleration\u003c\/li\u003e\n\u003cli\u003eEngineered to stay drone-free at cruise, which suits regular street and highway driving\u003c\/li\u003e\n\u003cli\u003eManufacturer-rated 23.43 percent flow increase over the stated baseline\u003c\/li\u003e\n\u003cli\u003eStainless steel construction intended for long-term durability and appearance\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment with included hardware and instructions, no welding required\u003c\/li\u003e\n\u003cli\u003eCovered by a CORSA Limited Lifetime warranty for as long as you own the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang Dark Horse \/ GT (5.0L), Fastback\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L), Convertible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCORSA Limited Lifetime warranty, valid for as long as you own the vehicle, with proof of purchase.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68304704372921,"sku":"COR14327","price":747.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/14327-2015-2019-ford-mustang-gt-3-0-double-helixx-x-pipe-14327-x-pipe-744519663632.jpg?v=1794374984"},{"product_id":"kooks-2025-ford-mustang-gtd-5-2l-3in-oem-connection-green-catted-x-pipe-kooks-header-required","title":"Kooks 2025+ Ford Mustang GTD 5.2L 3in OEM Connection GREEN Catted X-Pipe (Kooks Header Required)","description":"\u003cp\u003eThe Kooks 3-inch OEM Connection GREEN Catted X-Pipe is a catalyzed crossover mid-section built for the 2025 and later Ford Mustang GTD with the 5.2L V8. The X-pipe layout ties the two exhaust banks together ahead of the rest of the system, the integrated catalytic converters keep the section catted, and the OEM-style 3-inch connection lets it join the downstream exhaust. It is designed to pair with Kooks headers, which are required for this part to fit.\u003c\/p\u003e\n\u003cp\u003eKooks Headers has been building exhaust components since 1962 and remains independently owned and operated, now under its third generation of family leadership. The company handcrafts its products in the USA from T304 stainless steel, dyno and race tests them, and backs them with a Limited Lifetime Warranty to the original purchaser. For GTD owners already running or planning a Kooks header installation, this X-pipe is the matching catted mid-section from the same manufacturer.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe crossover design with integrated catalytic converters (catted)\u003c\/li\u003e\n\u003cli\u003eKooks GREEN catted configuration\u003c\/li\u003e\n\u003cli\u003e3-inch OEM connection\u003c\/li\u003e\n\u003cli\u003eBuilt for the 2025+ Ford Mustang GTD 5.2L V8\u003c\/li\u003e\n\u003cli\u003eRequires Kooks headers\u003c\/li\u003e\n\u003cli\u003eConstructed from T304 stainless steel\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA\u003c\/li\u003e\n\u003cli\u003eDyno and race tested by Kooks\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty to the original purchaser\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Handcrafted in the USA\u003c\/h3\u003e\u003cp\u003eKooks builds its exhaust components from T304 stainless steel, a grade the manufacturer describes as aircraft quality. Every Kooks product is handcrafted in the USA, and the company states its parts are 100 percent manufactured domestically.\u003c\/p\u003e\u003cp\u003eKooks has been producing headers and complete exhaust systems since 1962 and remains an independent, family-run company in its third generation. Its products have been used in competition across organizations including NHRA, IHRA, NMCA, NMRA, NASCAR, NASA and SCCA, and each product is dyno and race tested before release.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eKooks states that its systems are designed with maximum power as the goal and that each product is validated on the dyno and on track. As an X-pipe, this section connects the left and right exhaust banks in a crossover, while the catalytic converters keep the mid-section catted. Kooks does not publish specific horsepower, torque or sound figures for this part.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKooks headers are required; this X-pipe is designed to work with a Kooks header installation rather than the factory exhaust manifolds.\u003c\/li\u003e\n\u003cli\u003eUses a 3-inch OEM connection to join the downstream exhaust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMatches a Kooks header installation on the Mustang GTD with a catted mid-section from the same manufacturer.\u003c\/li\u003e\n\u003cli\u003eRetains catalytic converters in the X-pipe section rather than going to an off-road setup.\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction, handcrafted in the USA.\u003c\/li\u003e\n\u003cli\u003eDyno and race tested by a manufacturer with exhaust experience dating back to 1962.\u003c\/li\u003e\n\u003cli\u003eCovered by a Limited Lifetime Warranty to the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2025-2026 Ford Mustang (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLimited Lifetime Warranty to the original purchaser.\u003c\/p\u003e","brand":"Kooks Headers","offers":[{"title":"Default Title","offer_id":68304705355961,"sku":"KSH11575380","price":3211.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c27a3ad5b1dd4aeaab624136d39229a0_b2dfe5b2-c947-4b4e-af34-e33fba11571c.png?v=1794435504"},{"product_id":"roush-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-improved-sound-direct-fit","title":"ROUSH 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with Improved Sound (Direct-Fit)","description":"\u003cp\u003eThe ROUSH Resonator Delete X-Pipe is a direct-fit mid-pipe for the 5.0L Coyote V8 Mustang GT. It replaces the factory resonator section with a 2.5-inch stainless steel X-pipe, removing the resonators from the exhaust path and merging the two banks through an X-style crossover. ROUSH designs the assembly to cut back pressure, improve exhaust flow, and give the car a more aggressive, race-inspired exhaust note than the stock setup.\u003c\/p\u003e\n\u003cp\u003eThis is a practical upgrade for Mustang GT owners who want more sound and better flow without changing the rest of their exhaust system. ROUSH engineered the part from OEM vehicle CAD data for an accurate fit. It works with both Ford and ROUSH active exhaust systems, installs without vehicle modifications, ships with the necessary hardware, and is backed by a ROUSH limited warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEliminates the factory resonators for a more aggressive, growling exhaust tone\u003c\/li\u003e\n\u003cli\u003eX-pipe design increases exhaust flow and reduces back pressure\u003c\/li\u003e\n\u003cli\u003e2.5-inch X-pipe assembly\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent flow through the bends\u003c\/li\u003e\n\u003cli\u003eHigh-grade stainless steel construction for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered using OEM vehicle CAD data for an accurate fit\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford factory active exhaust and ROUSH active exhaust systems\u003c\/li\u003e\n\u003cli\u003eFits both fastback and convertible 5.0L V8 Mustang GT models\u003c\/li\u003e\n\u003cli\u003e12-pound weight reduction compared to the stock assembly, as stated by ROUSH\u003c\/li\u003e\n\u003cli\u003eDirect-fit installation with no vehicle modifications required\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary hardware\u003c\/li\u003e\n\u003cli\u003eROUSH 3-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eROUSH builds the Resonator Delete X-Pipe from high-grade stainless steel. The material was chosen for long-term durability and corrosion resistance, two qualities that matter for a component mounted low under the car where it is exposed to road debris, moisture, and repeated heat cycles.\u003c\/p\u003e\u003cp\u003eThe 2.5-inch tubing is mandrel bent, so the pipe keeps a consistent inside diameter through each bend instead of crimping or flattening. ROUSH developed the assembly from OEM vehicle CAD data, which lets it bolt in at the factory mounting locations as a true direct-fit part.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonators changes the character of the Coyote V8's exhaust note. ROUSH describes the result as a racecar-like growl, with a more aggressive sound than the stock system produces.\u003c\/p\u003e\u003cp\u003eThe X-pipe merges the two exhaust banks and, with the mandrel-bent tubing, reduces back pressure and improves flow through the system. ROUSH states this improves horsepower, torque, and overall performance, but does not publish specific gain figures. The part also works with Ford's factory active exhaust, so owners with active valves can keep that function after installation.\u003c\/p\u003e\u003cp\u003eROUSH lists a 12-pound weight reduction compared to the stock assembly.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit design; ROUSH describes installation as quick and easy\u003c\/li\u003e\n\u003cli\u003eNo vehicle modifications required\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware is included\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford and ROUSH active exhaust systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonators for a noticeably more aggressive exhaust sound\u003c\/li\u003e\n\u003cli\u003eReduces back pressure and improves exhaust flow through the mid-pipe section\u003c\/li\u003e\n\u003cli\u003eMandrel-bent stainless steel tubing for consistent flow and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eEngineered from OEM CAD data for a direct fit with no modifications\u003c\/li\u003e\n\u003cli\u003eRetains compatibility with Ford factory active exhaust and ROUSH active exhaust systems\u003c\/li\u003e\n\u003cli\u003eReduces weight compared to the stock assembly\u003c\/li\u003e\n\u003cli\u003eCovered by a ROUSH 3-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eROUSH Resonator Delete X-Pipe assembly\u003c\/li\u003e\n\u003cli\u003eAll necessary installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eROUSH 3-Year Limited Warranty\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68304937517241,"sku":"RSH422046","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/rsh-422046_1_big.jpg?v=1794436044"},{"product_id":"kooks-2015-2026-ford-mustang-5-0l-v8-oem-resonator-delete-h-pipe-kit-11513500","title":"Kooks 2015-2026 Ford Mustang 5.0L V8 OEM Resonator Delete H-Pipe Kit - 11513500","description":"\u003cp\u003eThe Kooks 11513500 is an H-pipe resonator delete kit for the 5.0L V8 Mustang. It takes the place of the factory resonator in the mid-pipe section of the exhaust. The kit is listed in a 2-1\/4\" x 3\" x 2-1\/2\" configuration and is built to mate with the stock exhaust components on both ends: the OEM headers at the front and the OEM exhaust at the rear.\u003c\/p\u003e\n\u003cp\u003eThis part suits owners of 2015 and later 5.0L Mustangs who want to remove the factory resonator without replacing the rest of the exhaust. It fits between factory parts, and Kooks supplies the midpipe adapters and clamps needed to install it. Kooks says the part is handcrafted in the USA by a family-owned company with a long history in headers and exhaust systems.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH-pipe resonator delete design that replaces the factory resonator\u003c\/li\u003e\n\u003cli\u003eListed configuration: 2-1\/4\" x 3\" x 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eIncludes a 2-1\/4\" x 3\" H-pipe\u003c\/li\u003e\n\u003cli\u003eMidpipe adapters included\u003c\/li\u003e\n\u003cli\u003eClamps necessary for installation included\u003c\/li\u003e\n\u003cli\u003eConnects to OEM headers and OEM exhaust\u003c\/li\u003e\n\u003cli\u003eDesigned for 2015-2026 Mustang 5.0L V8 applications\u003c\/li\u003e\n\u003cli\u003eKooks part number 11513500\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandcrafted in the USA by Kooks\u003c\/h3\u003e\u003cp\u003eKooks states that all of its products are handcrafted in the USA. The company describes itself as family owned and independently operated, now under a third generation of family leadership. It traces its history in headers and exhaust back to 1962.\u003c\/p\u003e\u003cp\u003eThe manufacturer says it has won championships and set records across many racing organizations, including NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, and SCCA. Kooks reports that its Statesville, North Carolina facility opened in July 2009 and covers 45,000 square feet on more than 11 acres of property.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory resonator in the mid-pipe section\u003c\/li\u003e\n\u003cli\u003eConnects to the OEM headers and the OEM exhaust\u003c\/li\u003e\n\u003cli\u003eMidpipe adapters and the clamps necessary for installation are included in the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator from the 5.0L Mustang exhaust and puts a Kooks H-pipe in its place\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the stock headers and stock rear exhaust, so the rest of the system can stay in place\u003c\/li\u003e\n\u003cli\u003eComes with the midpipe adapters and clamps needed for installation\u003c\/li\u003e\n\u003cli\u003eBuilt by an American manufacturer that handcrafts its headers and exhaust products in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang (5.0L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-1\/4\" x 3\" H-Pipe\u003c\/li\u003e\n\u003cli\u003eMidpipe adapters\u003c\/li\u003e\n\u003cli\u003eClamps necessary for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68305044766905,"sku":"KSH11513500","price":347.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/2168a90554aec4f78bbb56c508780471_6d92ea9f-a0a6-406c-9e22-3933154ad236.png?v=1794376848"},{"product_id":"mbrp-2-5-inch-h-pipe-resonator-bypass-t409-2015-2026-ford-mustang-s7283409","title":"MBRP 2.5-Inch H-Pipe Resonator Bypass T409. (2015-2026 Ford Mustang) - S7283409","description":"\u003cp\u003eThe MBRP S7283409 is a 2.5-inch H-pipe that takes the place of the factory resonated mid-pipe section on 2015-2026 Ford Mustang models. It is part of MBRP's ARMOR PLUS Series and is built from T409 stainless steel. It removes the resonators from the exhaust path and adds an H-style crossover between the two banks, with mandrel bent tubing used throughout to keep flow smooth.\u003c\/p\u003e\n\u003cp\u003eThis part suits Mustang owners who want a sharper exhaust tone and a less restrictive mid-pipe without moving to a full system. MBRP pairs the T409 construction with a lifetime warranty, and clamps are included for installation. The manufacturer also positions its exhaust products as a base for other bolt-on upgrades such as cold air intakes and programmers.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.5-inch tubing diameter\u003c\/li\u003e\n\u003cli\u003eH-pipe layout with resonator bypass design\u003c\/li\u003e\n\u003cli\u003eT409 stainless steel construction\u003c\/li\u003e\n\u003cli\u003ePart of the MBRP ARMOR PLUS Series\u003c\/li\u003e\n\u003cli\u003eMandrel bent tubing with no rippling in the bends\u003c\/li\u003e\n\u003cli\u003eLaser cut MBRP logo\u003c\/li\u003e\n\u003cli\u003eImproved exhaust tone compared to the resonated setup\u003c\/li\u003e\n\u003cli\u003eClamps included\u003c\/li\u003e\n\u003cli\u003eDeveloped with testing on MBRP's in-house Mustang 1100 AWD-SE chassis dynamometer, plus road and track mileage\u003c\/li\u003e\n\u003cli\u003eMBRP part number S7283409\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT409 Stainless Steel ARMOR PLUS Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds its ARMOR PLUS Series components from T409 stainless steel. The company describes this as a value-oriented, corrosion-resistant material that holds up against penetrating rust, and notes that the tubing is easy to keep clean. MBRP says T409 is well suited to drivers who don't see much precipitation or road salt.\u003c\/p\u003e\u003cp\u003eMBRP is clear about the limits of T409. Winter conditions, heavy salt air, and road treatments can speed up corrosion. The manufacturer's warranty does not cover that kind of corrosion unless the part or system fails completely. Owners in harsh winter climates should keep this in mind.\u003c\/p\u003e\u003cp\u003eEvery tube is mandrel bent, so the bends keep a consistent diameter without the rippling or crimping that can restrict flow. The pipe carries a laser cut MBRP logo.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMandrel bending keeps the full tube diameter through each bend, which MBRP says lets exhaust leave the engine more efficiently. The manufacturer links better exhaust flow to more fresh air reaching the cylinders, which supports power output, performance, and engine longevity. MBRP does not publish specific horsepower or torque figures for this part.\u003c\/p\u003e\u003cp\u003eRemoving the resonators and adding an H-pipe crossover changes the exhaust note. MBRP describes the result as an improved exhaust tone. The company says its exhaust products are developed through dyno sessions on its in-house Mustang 1100 AWD-SE chassis dynamometer and through road and track testing, with an emphasis on minimal bend angles to clear exhaust quickly.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonators for a more pronounced exhaust tone\u003c\/li\u003e\n\u003cli\u003eAdds an H-pipe crossover in a 2.5-inch tube diameter\u003c\/li\u003e\n\u003cli\u003eMandrel bent tubing supports smooth exhaust flow through the mid-pipe\u003c\/li\u003e\n\u003cli\u003eT409 stainless steel resists penetrating rust in moderate climates\u003c\/li\u003e\n\u003cli\u003eComes with the clamps needed to connect it\u003c\/li\u003e\n\u003cli\u003eBacked by MBRP's lifetime warranty, subject to the corrosion exclusions stated by the manufacturer\u003c\/li\u003e\n\u003cli\u003eWorks as a foundation for other bolt-on upgrades such as intakes and tuners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.5-inch T409 stainless steel H-pipe resonator bypass\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP backs ARMOR PLUS Series exhaust components with a lifetime warranty. Corrosion that is accelerated by winter conditions, heavy salt air, or road treatments is not covered unless the part or system fails completely.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305171644601,"sku":"MBRPS7283409","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_c100574e-8250-415e-8227-d94ddacb060c.webp?v=1794435521"},{"product_id":"borla-2015-2026-ford-mustang-gt-x-pipe-with-mid-pipes-for-maximum-flow-60705","title":"Borla 2015-2026 Ford Mustang GT X-Pipe with Mid-Pipes for Maximum Flow (60705)","description":"\u003cp\u003eThe Borla 60705 is an X-pipe with integrated mid-pipes for the S550-generation Ford Mustang GT with the 5.0L V8. It replaces the factory crossover and connecting pipes between the exhaust manifolds and the rear section of the exhaust. Borla positions this part for maximum flow and offers it in a single configuration for both manual and automatic transmission cars.\u003c\/p\u003e\n\u003cp\u003eThe 60705 works on Mustang GT fastbacks and convertibles whether or not they have the factory Active Valve Performance Exhaust, so one part covers most rear-wheel-drive 5.0L GT builds from this era. Borla is known for stainless steel performance exhaust and its signature sound. This X-pipe suits owners who want to upgrade the middle of the exhaust system from a manufacturer with a long history of exhaust engineering.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe crossover combined with mid-pipes in one assembly\u003c\/li\u003e\n\u003cli\u003eBorla part number 60705\u003c\/li\u003e\n\u003cli\u003eDescribed by Borla as designed for maximum flow\u003c\/li\u003e\n\u003cli\u003eCompatible with vehicles with or without Active Valve Performance Exhaust\u003c\/li\u003e\n\u003cli\u003eSuitable for both automatic and manual transmission Mustang GT models\u003c\/li\u003e\n\u003cli\u003eIntended for rear-wheel-drive 5.0L V8 Mustang GT coupes and convertibles\u003c\/li\u003e\n\u003cli\u003eManufactured by Borla, a specialist in stainless steel performance exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBorla Exhaust Engineering\u003c\/h3\u003e\u003cp\u003eBorla Performance Industries designs and manufactures stainless steel performance exhaust. The company started by building exhaust systems for concours-level classics such as Rolls-Royce and Ferrari. It later expanded into exhaust for modern performance vehicles used on the street, off-road, and in racing.\u003c\/p\u003e\u003cp\u003eThe 60705 combines the X-pipe crossover and the mid-pipes in one unit. That makes it a complete replacement for the middle section of the Mustang GT exhaust rather than a single crossover component.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAn X-pipe joins the left and right exhaust banks at a central crossover point. Borla describes the 60705 as built for maximum flow. The manufacturer also says its exhaust products deliver the distinctive Borla Sound of Power along with gains in power and torque, but it gives no specific figures for this part.\u003c\/p\u003e\u003cp\u003eBecause it works with or without the factory Active Valve Performance Exhaust, the 60705 can go on valved and non-valved Mustang GTs alike.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory mid-section with an X-pipe and mid-pipe assembly that Borla describes as built for maximum flow\u003c\/li\u003e\n\u003cli\u003eOne part number covers Mustang GTs with or without Active Valve Performance Exhaust\u003c\/li\u003e\n\u003cli\u003eWorks with both manual and automatic transmission cars\u003c\/li\u003e\n\u003cli\u003eComes from a manufacturer that specializes in performance exhaust and is known for its signature exhaust tone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2023 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305436573881,"sku":"BOR60705","price":589.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60705-main-1-xlarge.jpg?v=1794430359"},{"product_id":"mbrp-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-t-409-construction-2-5-diameter","title":"MBRP 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with T-409 Construction (2.5\" Diameter)","description":"\u003cp\u003eThe MBRP XP Series Resonator Delete X-Pipe is a mid-pipe section for the 5.0L Mustang GT and Bullitt. It takes the place of the factory resonator assembly in the exhaust system and works with the original catalytic converters, which remain in place. It covers both the S550 and S650 generations, so owners of either platform can use the same part to change how their exhaust sounds.\u003c\/p\u003e\n\u003cp\u003eThe factory resonator is there to quiet the exhaust, and MBRP notes that it also adds restriction and weight. Removing it lets more of the Coyote V8's sound come through. The X-pipe crossover balances pressure between the left and right banks, which MBRP says helps horsepower and gives a deeper, fuller tone. The pipe is made from 409 stainless steel with 2-1\/2 inch mandrel-bent tubing and bolts into place using clamps. It suits owners who want a more aggressive exhaust note without removing their catalytic converters.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart of the MBRP XP Series\u003c\/li\u003e\n\u003cli\u003eResonator delete design that replaces the factory resonator\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover that balances exhaust pressure between the two banks\u003c\/li\u003e\n\u003cli\u003eMade from T-409 (409) stainless steel for corrosion resistance\u003c\/li\u003e\n\u003cli\u003e2-1\/2 inch (2.5 inch) diameter mandrel-bent piping\u003c\/li\u003e\n\u003cli\u003eReuses the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eBolt-in installation using clamps\u003c\/li\u003e\n\u003cli\u003eLighter than the factory resonator assembly, according to MBRP\u003c\/li\u003e\n\u003cli\u003eDesigned for S550 and S650 Mustang GT and Bullitt models with the 5.0L engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e409 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds this X-pipe from 409 stainless steel, also listed as T-409, which is chosen for long-term corrosion resistance. That matters for a part mounted under the car, where it is exposed to road spray, moisture, and heat cycling.\u003c\/p\u003e\u003cp\u003eThe 2-1\/2 inch tubing is mandrel bent, so the pipe keeps a consistent inside diameter through each bend instead of narrowing where it is crimped. MBRP specifies this to help flow move efficiently through the system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith the factory resonator removed, more of the 5.0L V8's exhaust note reaches the tailpipes. MBRP says the stock resonator keeps the S550 and S650 quiet and restricts flow. Deleting it is meant to make the engine's sound and character more noticeable from the driver's seat.\u003c\/p\u003e\u003cp\u003eThe X-pipe junction lets exhaust pulses from each cylinder bank cross over and balance pressure between the two pipes. MBRP credits this with improving horsepower and giving a deeper, more powerful tone. The manufacturer does not publish specific power figures.\u003c\/p\u003e\u003cp\u003eMBRP describes the part as lightweight compared with the heavier factory resonator it replaces.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-in design that installs with clamps\u003c\/li\u003e\n\u003cli\u003eUses the factory catalytic converters, which stay in place\u003c\/li\u003e\n\u003cli\u003eMBRP describes installation as fast and easy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator to bring out more of the 5.0L V8's exhaust sound\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover balances pressure between banks for a deeper tone\u003c\/li\u003e\n\u003cli\u003e409 stainless steel resists corrosion for long-term use under the car\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2-1\/2 inch tubing supports efficient exhaust flow\u003c\/li\u003e\n\u003cli\u003eKeeps the factory catalytic converters in the system\u003c\/li\u003e\n\u003cli\u003eBolt-in, clamp-on installation with no permanent changes to the factory converters\u003c\/li\u003e\n\u003cli\u003eCovered by MBRP's lifetime warranty against defects in materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang Bullitt \/ GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP lifetime warranty covering defects in materials and workmanship.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305438474425,"sku":"MBRPS7213409","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_f16569c0-98a5-434e-89af-d45f10a43081.webp?v=1794435533"},{"product_id":"roush-y-pipe-2015-2026-mustang-2-3l-ecoboost-422091","title":"Roush Y-Pipe (2015-2026 Mustang 2.3L EcoBoost) - 422091","description":"\u003cp\u003eThe Roush Resonator Delete Y-Pipe, part number 422091, is a 2.5-inch mid-pipe assembly for the four-cylinder 2.3L EcoBoost Mustang. It takes the place of the factory resonator section, so exhaust gases pass through a mandrel-bent 304 stainless steel Y-pipe instead of the stock resonator. Roush designed the part using OEM vehicle CAD data so that it lines up with the factory exhaust layout.\u003c\/p\u003e\n\u003cp\u003eThe part serves two purposes. It lowers back pressure and improves exhaust flow, which Roush says supports horsepower, torque, and overall performance. It also removes the resonator, which gives a deeper and more aggressive exhaust note. For EcoBoost owners who want a stronger sound and a more open exhaust path without replacing the whole system, this Y-pipe is a direct way to make that change. It is made from corrosion-resistant stainless steel and comes with the hardware needed to install it.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoush part number 422091\u003c\/li\u003e\n\u003cli\u003eDeletes the factory resonator for a deeper, more aggressive exhaust tone\u003c\/li\u003e\n\u003cli\u003e2.5-inch Y-pipe assembly\u003c\/li\u003e\n\u003cli\u003eBuilt from high-grade 304 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent flow\u003c\/li\u003e\n\u003cli\u003eDesigned to reduce back pressure and improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eEngineered using OEM vehicle CAD data for proper fitment\u003c\/li\u003e\n\u003cli\u003eManufacturer states an approximate 12-pound weight reduction compared with the stock assembly\u003c\/li\u003e\n\u003cli\u003eManufacturer states it fits both fastback and convertible 2.3L EcoBoost Mustangs\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eRoush makes the 422091 Y-pipe from high-grade 304 stainless steel. This alloy resists corrosion and holds up to the heat cycling and road exposure an exhaust system faces underneath the car.\u003c\/p\u003e\u003cp\u003eEvery bend in the Y-pipe is mandrel formed. This keeps the inside diameter of the 2.5-inch tubing consistent through each turn instead of letting it crimp or flatten, which helps maintain steady flow and limits restriction. Roush developed the assembly from OEM vehicle CAD data so that it matches the factory mounting points and connections.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonator changes the character of the EcoBoost exhaust note. Roush describes the result as a deep, aggressive, race-inspired sound compared with the stock setup.\u003c\/p\u003e\u003cp\u003eThe Y-pipe is designed to cut back pressure and improve flow through the four-cylinder exhaust system, which Roush says supports horsepower and torque. The manufacturer does not publish specific power figures. Roush also states an approximate 12-pound weight reduction compared with the stock assembly.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoush describes installation as quick and simple.\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware is included with the Y-pipe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDeletes the factory resonator for a more aggressive exhaust sound on the 2.3L EcoBoost\u003c\/li\u003e\n\u003cli\u003e2.5-inch mandrel-bent tubing reduces back pressure and keeps flow consistent\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction resists corrosion over the long term\u003c\/li\u003e\n\u003cli\u003eOEM CAD-based design supports proper fitment with the factory exhaust\u003c\/li\u003e\n\u003cli\u003eApproximate 12-pound weight reduction stated by the manufacturer\u003c\/li\u003e\n\u003cli\u003eComes with the hardware required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoush 2.5-inch 304 stainless steel Y-pipe assembly\u003c\/li\u003e\n\u003cli\u003eAll necessary installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68305440145593,"sku":"RSH422091","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/fb84cad4508fe95e9d6b59d995a091e1.jpg?v=1794782251"},{"product_id":"mbrp-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-2-5-aluminum-construction-s7213al","title":"MBRP 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with 2.5\" Aluminum Construction (S7213AL)","description":"\u003cp\u003eThe MBRP S7213AL is a resonator delete X-pipe from MBRP's Installer Series, built for S550 and S650 Mustang GT and Bullitt owners who want a more open exhaust note without paying for a stainless steel system. It takes the place of the heavy factory resonator assembly in the mid-section of the exhaust and uses 2-1\/2 inch mandrel-bent aluminized steel tubing joined by an X-pipe crossover.\u003c\/p\u003e\n\u003cp\u003eMBRP describes the factory resonator as both quiet and restrictive, muting the sound of the 5.0L V8. Removing it and adding an X-pipe crossover is meant to produce a deeper, more aggressive tone while improving flow. The design keeps your factory catalytic converters in place, and the bolt-in, clamp-together layout suits enthusiasts who handle their own exhaust work. MBRP backs the part with a lifetime warranty against manufacturing defects.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMBRP Installer Series resonator delete, part number S7213AL\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover that MBRP says balances pressure between the left and right exhaust banks\u003c\/li\u003e\n\u003cli\u003e2-1\/2 inch mandrel-bent tubing for more efficient exhaust flow\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eLightweight replacement for the heavy factory resonator\u003c\/li\u003e\n\u003cli\u003eRetains the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eBolt-in design that installs with clamps\u003c\/li\u003e\n\u003cli\u003eIntended for S550 and S650 Mustangs with the 5.0L V8\u003c\/li\u003e\n\u003cli\u003eMBRP lifetime warranty covering defects in materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAluminized Steel, 2-1\/2 Inch Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eThe S7213AL is part of MBRP's Installer Series, a line positioned as a lower-cost alternative to stainless steel kits while targeting comparable performance. The tubing is aluminized steel, which MBRP specifies for long-term corrosion resistance.\u003c\/p\u003e\u003cp\u003eThe piping is 2-1\/2 inch diameter and mandrel bent, so the tube keeps a consistent cross-section through each bend instead of crimping or narrowing. MBRP says this helps the exhaust flow more efficiently and supports performance.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory resonator removes a component that MBRP calls a source of both sound damping and restriction. The result is a louder, more pronounced exhaust note from the 5.0L V8.\u003c\/p\u003e\u003cp\u003eThe X-pipe crossover lets exhaust pulses from each bank interact and equalize pressure between the two pipes. MBRP credits this design with improving horsepower and producing a deeper, more powerful tone. The manufacturer does not publish specific gain figures.\u003c\/p\u003e\u003cp\u003eSwapping the heavy stock resonator for this lighter pipe assembly also cuts some weight from the exhaust system, though MBRP does not state an exact figure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-in application that installs with clamps\u003c\/li\u003e\n\u003cli\u003eReplaces the factory resonator assembly\u003c\/li\u003e\n\u003cli\u003eReuses the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eMBRP describes installation as fast and easy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator, which MBRP identifies as a restriction that mutes the 5.0L V8\u003c\/li\u003e\n\u003cli\u003eAdds an X-pipe crossover for a deeper exhaust tone and balanced pressure between banks\u003c\/li\u003e\n\u003cli\u003eUses 2-1\/2 inch mandrel-bent tubing for more efficient flow\u003c\/li\u003e\n\u003cli\u003eAluminized steel offers corrosion resistance at a lower cost than stainless steel kits\u003c\/li\u003e\n\u003cli\u003eKeeps the factory catalytic converters in place\u003c\/li\u003e\n\u003cli\u003eBolt-in, clamp-together design suits home installation\u003c\/li\u003e\n\u003cli\u003eCovered by MBRP's lifetime warranty against defects in materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang Bullitt \/ GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP lifetime warranty covering defects in materials and workmanship.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305440309433,"sku":"MBRPS7213AL","price":184.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_88779bc7-d8d7-42bc-99fb-2178561da5d6.webp?v=1794435536"},{"product_id":"borla-t304-ss-h-pipe-2015-2026-ford-mustang-gt-2024-dark-horse-60752","title":"Borla T304 SS H-Pipe (2015-2026 Ford Mustang GT \/ 2024+ Dark Horse) - 60752","description":"\u003cp\u003eThe Borla 60752 is a T-304 stainless steel H-pipe built to take the place of the factory resonator on the 5.0L V8 Mustang. It fits in the mid-pipe section of the stock exhaust and adds a balance tube between the left and right banks. The pipe removes the OE resonator and joins the two sides of the exhaust in its place. It works with both automatic and manual transmission cars.\u003c\/p\u003e\n\u003cp\u003eBorla says the H-pipe evens out the exhaust pulses from each bank to improve performance and gives a sound that a crossover pipe of this type is known for. It is made from T-304 stainless with mandrel-bent tubing and CNC-controlled manufacturing for consistent fitment. It suits owners of Coyote-powered GT, Mach 1, and Dark Horse models who want a more aggressive exhaust note and a durable stainless replacement for the resonator. You can run it on its own or add other Borla components later.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the Original Equipment (O.E.) resonator only\u003c\/li\u003e\n\u003cli\u003eH-pipe design with a crossover balance tube that blends combustion pulses from both banks\u003c\/li\u003e\n\u003cli\u003eConstructed from T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth, unrestricted flow\u003c\/li\u003e\n\u003cli\u003ePrecision CNC manufacturing for accurate fitment\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 33.2 in. long x 7.1 in. wide x 4.2 in. high\u003c\/li\u003e\n\u003cli\u003eInlets: 2.25 in. O.D.\u003c\/li\u003e\n\u003cli\u003ePipes: 2.75 in. O.D.\u003c\/li\u003e\n\u003cli\u003eOutlets: 2.5 in. I.D., angled slightly outward\u003c\/li\u003e\n\u003cli\u003eBorla logo laser etched on the balance tube\u003c\/li\u003e\n\u003cli\u003eCompatible with automatic and manual transmission vehicles\u003c\/li\u003e\n\u003cli\u003eCan be installed alone or combined with other Borla parts\u003c\/li\u003e\n\u003cli\u003eIncludes two 2.5 in. clamps\u003c\/li\u003e\n\u003cli\u003eBacked by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this H-pipe from T-304 stainless steel. The manufacturer positions this alloy above T-400 series stainless such as 409 for both performance and durability.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, so the pipe keeps its full diameter through each bend instead of crimping or narrowing. Borla credits this with maximizing flow and power. CNC-controlled manufacturing keeps the dimensions consistent and helps the assembly line up accurately with the factory exhaust. The Borla logo is laser etched on the balance tube.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe crossover tube connects the left and right exhaust banks so the combustion pulses from each side of the V8 can merge. Borla states this produces improved performance.\u003c\/p\u003e\u003cp\u003eOn sound, Borla describes an aggressive, custom tone that it says only an H-pipe system can produce. Because the part removes the factory resonator, expect a change in the exhaust character compared with stock.\u003c\/p\u003e\u003cp\u003eThe outlets are 2.5 in. I.D. and angle slightly outward. The pipe can serve as a standalone upgrade or as one piece of a larger Borla exhaust setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces only the Original Equipment (O.E.) resonator\u003c\/li\u003e\n\u003cli\u003eInstallation requires cutting the O.E. exhaust\u003c\/li\u003e\n\u003cli\u003eCan be installed by itself or combined with other Borla exhaust components\u003c\/li\u003e\n\u003cli\u003eTwo 2.5 in. clamps are included for connecting the outlets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator and adds an H-pipe crossover for a more aggressive exhaust tone\u003c\/li\u003e\n\u003cli\u003eBlends exhaust pulses between banks, which Borla states improves performance\u003c\/li\u003e\n\u003cli\u003eT-304 stainless construction for long-term corrosion resistance and durability\u003c\/li\u003e\n\u003cli\u003eMandrel bends preserve tube diameter for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing for accurate fit with the factory exhaust\u003c\/li\u003e\n\u003cli\u003eWorks as a standalone upgrade or as part of a larger Borla system\u003c\/li\u003e\n\u003cli\u003eCovered by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2025 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2021-2023 Ford Mustang Mach 1\u003c\/li\u003e\n\u003cli\u003e2024-2025 Ford Mustang Dark Horse (5.0L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla T-304 stainless steel H-pipe assembly\u003c\/li\u003e\n\u003cli\u003e2 x 2.5 in. clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305578885305,"sku":"BOR60752","price":356.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60752-main-1-xlarge.jpg?v=1794430380"},{"product_id":"borla-18-25-ford-mustang-gt-replacement-h-pipe","title":"Borla 18-25 Ford Mustang GT Replacement H-Pipe","description":"\u003cp\u003eThe Borla Replacement H-Pipe is a T-304 stainless steel crossover section built for 2018-2025 Mustang GT owners who already run, or plan to run, one of Borla's 3-inch cat-back exhaust systems. It takes the place of the Merge X-Pipe that comes with those systems, swapping the crossover style from an X configuration to an H configuration with a balance tube connecting the two sides.\u003c\/p\u003e\n\u003cp\u003eIt is not a universal mid-pipe. Borla designed it to work only with a specific group of its own 3-inch cat-back systems, in every tip option offered for them. The H-Pipe balances the exhaust pulses from each cylinder bank and gives the system a distinct, aggressive tone that differs from the X-Pipe arrangement. Mandrel-bent tubing, CNC manufacturing for accurate fitment, and Borla's Million-Mile Warranty make it a practical way to change the character of an existing Borla setup without replacing the entire system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the Merge X-Pipe in select Borla 3-inch cat-back systems\u003c\/li\u003e\n\u003cli\u003eCompatible Borla systems: 140960 through 140965, 140969 and 140970, as well as 140742, 140743, 140745 and 140746, in all tip options\u003c\/li\u003e\n\u003cli\u003eNot intended for use with any other exhaust system\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 21 in. long, 7.4 in. wide, 3 in. high\u003c\/li\u003e\n\u003cli\u003eInlet diameter: 3 in. O.D.\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 3 in. O.D.\u003c\/li\u003e\n\u003cli\u003eOutlet diameter: 3 in. I.D.\u003c\/li\u003e\n\u003cli\u003eH-style crossover with balance tube that blends combustion pulses from both cylinder banks\u003c\/li\u003e\n\u003cli\u003ePremium T-304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth flow\u003c\/li\u003e\n\u003cli\u003eCNC precision manufacturing for accurate fit\u003c\/li\u003e\n\u003cli\u003eLaser-etched Borla logo on the balance tube\u003c\/li\u003e\n\u003cli\u003eIncludes two 2.5 in. clamps\u003c\/li\u003e\n\u003cli\u003eBacked by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this H-Pipe from T-304 stainless steel, a grade the manufacturer positions above T-400 series alloys such as 409 for both performance and durability. Choosing T-304 for an exhaust section that sits under the car and sees heat cycling, road spray, and weather is aimed at long service life.\u003c\/p\u003e\u003cp\u003eThe tubing is formed with mandrel bends, which keep the pipe diameter consistent through each curve rather than allowing it to crimp or flatten. Borla uses CNC manufacturing to hold tight tolerances so the part lines up properly with the compatible cat-back systems. The balance tube carries a laser-etched Borla logo.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe H-Pipe ties the left and right sides of the exhaust together through a balance tube, blending the combustion pulses from both cylinder banks. Borla states this improves performance compared with leaving the banks separate.\u003c\/p\u003e\u003cp\u003eSound is the main reason to choose this part over the Merge X-Pipe. Borla describes the result as an aggressive, custom tone that is unique to H-Pipe exhaust layouts, giving the V8 a different character than the X-Pipe configuration in the same cat-back system.\u003c\/p\u003e\u003cp\u003eWith 3 in. O.D. inlets and tubing, 3 in. I.D. outlets, and mandrel-bent construction, the part is built to maintain flow through the crossover section.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstalls in place of the Merge X-Pipe in the compatible Borla 3-inch cat-back systems only\u003c\/li\u003e\n\u003cli\u003eTwo 2.5 in. clamps are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLets owners of a compatible Borla 3-inch cat-back change the exhaust tone from the X-Pipe sound to an H-Pipe sound without replacing the whole system\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for Borla's own systems, with CNC manufacturing for an accurate fit\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel and mandrel bends for durability and smooth flow\u003c\/li\u003e\n\u003cli\u003eCovered by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2025 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH-Pipe assembly\u003c\/li\u003e\n\u003cli\u003eTwo 2.5 in. clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305685807289,"sku":"BOR60753","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60753-main-1-xlarge.webp?v=1794430384"},{"product_id":"borla-18-25-mustang-gt-24-25-mustang-dark-horse-switchfire-x-pipe","title":"Borla 18-25 Mustang GT \/ 24-25 Mustang Dark Horse SwitchFire X-Pipe","description":"\u003cp\u003eThe Borla SwitchFire X-Pipe is a hydroformed crossover section that takes the place of the Merge X-Pipe in Borla 3-inch Cat-Back systems on the 2018-2025 Mustang GT and the 2024-2025 Mustang Dark Horse. Borla's patented SwitchFire layout does away with the turbulent center intersection found in a standard X-pipe. Instead, it blends the combustion pulses from each cylinder bank, which Borla credits with improved performance, more power, and an aggressive custom exhaust note.\u003c\/p\u003e\n\u003cp\u003eThis part is intended only for owners already running, or planning to run, a Borla 3-inch Cat-Back system on their Coyote-powered GT or Dark Horse. Borla uses hydroforming to give this version a lower profile than its conventional SwitchFire X-Pipe. Construction is T-304 austenitic stainless steel with mandrel bends and CNC precision manufacturing, and Borla backs it with its Million-Mile Warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Borla SwitchFire X-Pipe design that eliminates the turbulent center intersection of a standard X-pipe\u003c\/li\u003e\n\u003cli\u003eBlends combustion pulses from both sides of the engine\u003c\/li\u003e\n\u003cli\u003eHydroformed construction for a lower profile than a conventional SwitchFire X-Pipe\u003c\/li\u003e\n\u003cli\u003eReplaces the Merge X-Pipe in Borla Cat-Back systems\u003c\/li\u003e\n\u003cli\u003eCompatible with Borla 3-inch Cat-Back systems only\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 21.1 inches long x 7.8 inches wide x 5 inches high\u003c\/li\u003e\n\u003cli\u003e2.75-inch O.D. inlet and 3-inch I.D. outlet\u003c\/li\u003e\n\u003cli\u003eT-304 austenitic stainless steel construction\u003c\/li\u003e\n\u003cli\u003eUltra-smooth mandrel bends for flow\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing for accurate fitment\u003c\/li\u003e\n\u003cli\u003eCovered by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHydroformed T-304 Austenitic Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eBorla builds every SwitchFire X-Pipe from T-304 austenitic stainless steel. The company positions this material above T-400 series alternatives such as 409 stainless for both performance and long-term durability.\u003c\/p\u003e\u003cp\u003eHydroforming lets Borla achieve a lower profile on this X-pipe than on its conventional SwitchFire design. Mandrel bending keeps the tube bends smooth, and CNC manufacturing holds the dimensions needed for an accurate fit within the Borla Cat-Back system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eA conventional X-pipe merges both banks at a single center crossing, which creates turbulence. The SwitchFire design removes that intersection and blends the exhaust pulses from each side of the engine. According to Borla, this produces improved performance and power along with an aggressive custom sound.\u003c\/p\u003e\u003cp\u003eThe ultra-smooth mandrel bends are intended to maximize flow and power through the crossover section. Measuring 21.1 inches long, 7.8 inches wide, and 5 inches high, the part moves exhaust from a 2.75-inch O.D. inlet to a 3-inch I.D. outlet.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLets owners of a Borla 3-inch Cat-Back system swap the Merge X-Pipe for the SwitchFire configuration\u003c\/li\u003e\n\u003cli\u003eReplaces the standard center crossover with Borla's patented pulse-blending design, which Borla says improves performance and power\u003c\/li\u003e\n\u003cli\u003eDelivers the aggressive custom sound Borla attributes to the SwitchFire layout\u003c\/li\u003e\n\u003cli\u003eHydroformed shape provides a lower profile than Borla's conventional SwitchFire X-Pipe\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel and Borla's Million-Mile Warranty support long-term ownership\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2018-2025 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2024-2025 Ford Mustang Dark Horse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305704353977,"sku":"BOR60748","price":589.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60748-main-1-xlarge.jpg?v=1794430395"},{"product_id":"borla-t304ss-switchfire-x-pipe-2024-2026-ford-mustang-gt-2024-dark-horse-60750","title":"Borla T304SS Switchfire X-Pipe (2024-2026 Ford Mustang GT \/ 2024+ Dark Horse) - 60750","description":"\u003cp\u003eThe Borla 60750 is a T-304 stainless steel X-pipe built around Borla's SwitchFire design for the latest 5.0L V8 Mustang GT and Dark Horse. It takes the place of the factory resonator and nothing else in the system. Its center section is hydroformed, which lets Borla give it a lower profile than a conventional SwitchFire X-pipe.\u003c\/p\u003e\n\u003cp\u003eBorla's patented SwitchFire layout does away with the turbulent center junction found in a typical X-pipe. Instead, it merges the exhaust pulses from each cylinder bank, which Borla says gives an aggressive custom tone and improved power. The pipe can be used as a standalone upgrade or paired with other Borla exhaust components. Borla backs it with a Million-Mile Warranty, making it a durable middle section for owners building out their exhaust in stages.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla part number 60750\u003c\/li\u003e\n\u003cli\u003eSwitchFire X-pipe design that blends combustion pulses from both banks without a turbulent center intersection\u003c\/li\u003e\n\u003cli\u003eHydroformed center section for a lower profile than a conventional SwitchFire X-pipe\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 33.2 in. long x 7.1 in. wide x 5.5 in. high\u003c\/li\u003e\n\u003cli\u003eInlets: 2.25 in. O.D.\u003c\/li\u003e\n\u003cli\u003eOutlets: 2.5 in. I.D., angled slightly outward\u003c\/li\u003e\n\u003cli\u003eConstructed from T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing for accurate fitment\u003c\/li\u003e\n\u003cli\u003eTakes the place of the factory resonator only\u003c\/li\u003e\n\u003cli\u003eTwo 2.5 in. clamps supplied\u003c\/li\u003e\n\u003cli\u003eCovered by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHydroformed T-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this X-pipe from T-304 stainless steel. The manufacturer positions this grade above T-400 series stainless such as 409 for both performance and durability. The tubing is mandrel bent, so the bends stay smooth and keep a consistent diameter, helping exhaust flow.\u003c\/p\u003e\u003cp\u003eHydroforming is used to shape the center section. This process allows a shallower profile than Borla's conventional SwitchFire X-pipe, with an overall height of 5.5 in. Borla uses CNC manufacturing to hold tight tolerances so the assembly lines up accurately with the existing exhaust.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eA conventional X-pipe forces both banks' exhaust through a single crossover point, which creates turbulence at the center. Borla's SwitchFire design removes that intersection and blends the pulses from each side of the engine instead. According to Borla, the result is an aggressive custom exhaust note along with improved power.\u003c\/p\u003e\u003cp\u003eSmooth mandrel bends support flow through the assembly. The 2.5 in. I.D. outlets are angled slightly outward to direct exhaust toward the rear sections of the system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTakes the place of the factory resonator only; the rest of the factory exhaust is not replaced by this part\u003c\/li\u003e\n\u003cli\u003eThe factory exhaust must be cut to install this X-pipe\u003c\/li\u003e\n\u003cli\u003eInlets are 2.25 in. O.D. and outlets are 2.5 in. I.D.\u003c\/li\u003e\n\u003cli\u003eTwo 2.5 in. clamps are supplied for the connections\u003c\/li\u003e\n\u003cli\u003eCan be installed alone or combined with other Borla exhaust parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory resonator with a SwitchFire X-pipe that Borla says produces a more aggressive sound and improved power\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel construction for long-term durability\u003c\/li\u003e\n\u003cli\u003eHydroformed center section gives a lower profile than a conventional SwitchFire X-pipe\u003c\/li\u003e\n\u003cli\u003eMandrel bends and CNC manufacturing for good flow and accurate fit\u003c\/li\u003e\n\u003cli\u003eWorks as a standalone upgrade or as part of a larger Borla exhaust build\u003c\/li\u003e\n\u003cli\u003eBacked by Borla's Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2025 Ford Mustang Dark Horse \/ GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla SwitchFire X-pipe assembly (60750)\u003c\/li\u003e\n\u003cli\u003e2 x 2.5 in. clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305998020793,"sku":"BOR60750","price":669.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60750-main-1-xlarge.jpg?v=1794430415"},{"product_id":"stainless-works-2018-2026-ford-mustang-gt-mid-resonator-delete-h-pipe-with-high-flow-design-direct-fit","title":"Stainless Works 2018-2026 Ford Mustang GT Mid-Resonator Delete H-Pipe with High-Flow Design (Direct-Fit)","description":"\u003cp\u003eThe Stainless Works Mid-Resonator Delete H-Pipe is a direct-fit crossover pipe for the 5.0L Mustang GT. It removes the factory middle resonator and puts a performance H-pipe in its place, so the car keeps a balanced crossover between the two banks without the restriction and sound damping of the stock resonator.\u003c\/p\u003e\n\u003cp\u003eStainless Works builds this H-pipe with smooth mandrel bends to keep exhaust flow moving efficiently and full TIG welding at the joints for strength and a clean finished look. It is designed for a clamp-in installation, and the clamps come in the box. That makes it a simple way for GT owners to change the exhaust note and support performance without welding or cutting new pipe, whether the car stays stock or is part of a larger exhaust build.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete that replaces the OEM middle resonator\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover configuration\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for the 5.0L Mustang GT\u003c\/li\u003e\n\u003cli\u003eSmooth mandrel bends to optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eFully TIG welded for strength and appearance\u003c\/li\u003e\n\u003cli\u003eClamp-in installation\u003c\/li\u003e\n\u003cli\u003eClamps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent, Fully TIG-Welded Construction\u003c\/h3\u003e\u003cp\u003eStainless Works forms this H-pipe with mandrel bends. Mandrel bending keeps the pipe's cross-section smooth and consistent through each curve, avoiding the crimped or flattened sections that can restrict flow.\u003c\/p\u003e\u003cp\u003eEvery joint is TIG welded. Stainless Works chose this method for the strength of the welds and for the clean, uniform bead it leaves on the finished part.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory middle resonator removes a component whose job is to quiet the exhaust. With the H-pipe in its place, the car gets a more pronounced exhaust sound, and Stainless Works describes the part as a way to improve both sound and power.\u003c\/p\u003e\u003cp\u003eThe H-pipe crossover links the two exhaust banks. The smooth mandrel bends are intended to help exhaust gases move through the mid-section of the system efficiently.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for a clamp-in installation in place of the OEM middle resonator\u003c\/li\u003e\n\u003cli\u003eDirect-fit design\u003c\/li\u003e\n\u003cli\u003eRequired clamps are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a more noticeable exhaust note from your 5.0L GT without changing the rest of the factory system\u003c\/li\u003e\n\u003cli\u003eYou prefer a clamp-in part that does not require welding to install\u003c\/li\u003e\n\u003cli\u003eYou want a mid-pipe with mandrel bends and full TIG welds instead of the factory resonator section\u003c\/li\u003e\n\u003cli\u003eYou are building the exhaust in stages and want a direct-fit H-pipe to start with or to add later\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete H-pipe\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68306070012089,"sku":"SSWM18RESDH","price":546.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/m18resdh-1-primary.jpg?v=1794436143"},{"product_id":"bbk-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-high-flow-design-direct-bolt-on","title":"BBK 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with High-Flow Design (Direct Bolt-On)","description":"\u003cp\u003eThe BBK Performance high-flow resonator delete X-pipe replaces the restrictive factory resonator on 5.0L Mustang GT models from 2015 onward. It fits directly where the OEM resonator assembly mounts and uses an X-pipe layout to provide a less restrictive path for exhaust gases. BBK designs it to increase horsepower and torque and to give the car a more aggressive exhaust note than stock.\u003c\/p\u003e\n\u003cp\u003eThe pipe is intended for S550 and later Mustang GT owners who want more performance and sound from the mid-section of the exhaust without replacing the entire system. BBK offers it for the factory exhaust and for aftermarket systems that use full-length exhaust headers, so confirm your exhaust configuration before ordering. It is built from CNC mandrel-bent tubing and is designed and manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete pipe that replaces the factory OEM resonator\u003c\/li\u003e\n\u003cli\u003eX-pipe configuration with a high-flow design\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent tubing to improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eDesigned to increase horsepower and torque\u003c\/li\u003e\n\u003cli\u003eProduces a more aggressive exhaust sound than the stock resonator\u003c\/li\u003e\n\u003cli\u003eOffered for the factory exhaust or for aftermarket systems using full-length exhaust headers\u003c\/li\u003e\n\u003cli\u003eSpecial reducers allow fitment to the factory exhaust where applicable\u003c\/li\u003e\n\u003cli\u003eIncludes detailed instructions plus the hardware and clamps required for installation\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA by BBK Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCNC Mandrel-Bent Tubing, Designed and Built in the USA\u003c\/h3\u003e\u003cp\u003eBBK forms the tubing for this resonator delete X-pipe with CNC mandrel bending. Mandrel bending keeps the tube diameter consistent through each bend, avoiding the crimped sections that restrict flow in press-bent pipe. CNC control keeps the bends consistent, which supports the direct-fit replacement of the factory resonator.\u003c\/p\u003e\u003cp\u003eBBK Performance designs and manufactures the pipe in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe factory resonator restricts exhaust flow. Removing it in favor of a high-flow X-pipe with mandrel-bent tubing lets the engine move exhaust gases more freely. BBK states that this improved flow increases horsepower and torque on the 5.0L Mustang GT.\u003c\/p\u003e\u003cp\u003eDeleting the resonator also changes the character of the exhaust. BBK designed this pipe to give the Mustang GT a more aggressive sound than the stock setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit replacement for the factory OEM resonator\u003c\/li\u003e\n\u003cli\u003eDetailed instructions, hardware, and clamps are included in the kit\u003c\/li\u003e\n\u003cli\u003eWhen installing on the factory exhaust, special reducers are used where applicable, and cutting and clamping is required\u003c\/li\u003e\n\u003cli\u003eVersions are offered for the factory exhaust and for aftermarket systems with full-length headers, so confirm your application before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the restrictive factory resonator to improve exhaust flow on the 5.0L Mustang GT\u003c\/li\u003e\n\u003cli\u003eGives the car a more aggressive exhaust note than stock\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent tubing helps maintain flow through the bends\u003c\/li\u003e\n\u003cli\u003eCan be used with the factory exhaust or with aftermarket full-length header systems\u003c\/li\u003e\n\u003cli\u003eComes with instructions, hardware, and clamps for the installation\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA by BBK Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete X-pipe\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003cli\u003eAll required clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68306134958265,"sku":"BBK1818","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/50a4fb9dbad582f4307e322946ab9cd9.jpg?v=1794782261"},{"product_id":"stainless-works-2018-2026-ford-mustang-gt-mid-resonator-delete-x-pipe-with-high-flow-design-direct-fit","title":"Stainless Works 2018-2026 Ford Mustang GT Mid-Resonator Delete X-Pipe with High-Flow Design (Direct-Fit)","description":"\u003cp\u003eThe Stainless Works Mid-Resonator Delete X-Pipe is a direct-fit crossover for the 2018-2026 Ford Mustang GT with the 5.0L V8. It takes the place of the factory resonator in the middle of the exhaust system, putting a performance X-style crossover where the stock muffling chamber used to sit. The goal is a more distinctive exhaust note and better flow from the Coyote engine without rebuilding the whole system.\u003c\/p\u003e\n\u003cp\u003eBecause it is built as a clamp-in part, it suits owners who want a meaningful exhaust change they can handle in their own garage. The pipe uses smooth mandrel bends to keep exhaust gases moving efficiently and is fully TIG welded for strength and a clean finished look. The clamps needed to fit it are included. For Mustang GT owners who want more sound and a freer-flowing mid-section, it is a simple upgrade to the factory hardware.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete that removes the factory middle resonator\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover design for the 2018-2026 Mustang GT 5.0L\u003c\/li\u003e\n\u003cli\u003eSmooth mandrel bends to optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eFully TIG welded construction for strength and appearance\u003c\/li\u003e\n\u003cli\u003eDirect-fit, clamp-in installation\u003c\/li\u003e\n\u003cli\u003eClamps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent, Fully TIG-Welded Construction\u003c\/h3\u003e\u003cp\u003eStainless Works forms the tubing with smooth mandrel bends, which hold a consistent pipe diameter through each turn instead of crimping or flattening the tube. That consistency helps exhaust gases move through the crossover with less restriction.\u003c\/p\u003e\u003cp\u003eEvery joint is fully TIG welded. TIG welding gives precise, controlled beads that add structural strength at the seams and leave a neat, professional appearance on the finished part.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory mid resonator removes one of the stock exhaust's main sound-dampening components, so the 5.0L's exhaust note comes through more clearly. The X-pipe crossover then routes and merges flow between the two sides of the system.\u003c\/p\u003e\u003cp\u003eThe manufacturer presents the part as a way to improve both sound and power. It does not publish specific horsepower or torque figures.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a direct-fit, clamp-in installation\u003c\/li\u003e\n\u003cli\u003eRequired clamps are included with the X-pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory mid resonator for a more noticeable exhaust note from the 5.0L V8\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing keeps flow smooth through the crossover\u003c\/li\u003e\n\u003cli\u003eFully TIG welded joints provide strength and a clean look\u003c\/li\u003e\n\u003cli\u003eClamp-in, direct-fit design suits owners who do their own work\u003c\/li\u003e\n\u003cli\u003eComes with the clamps needed for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete X-pipe\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68306141577401,"sku":"SSWM18RESDX","price":546.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/m18resdx-1-primary.jpg?v=1794436169"}],"url":"https:\/\/engmustangs.com\/collections\/s650-x-pipes-mid-pipes.oembed","provider":"ENG Mustangs","version":"1.0","type":"link"}