{"title":"S650 Mustang Forced Induction","description":null,"products":[{"product_id":"snyder-performance-engineering-intercooler-manifold-stock-12an-2020-shelby-gt500-2026-mustang-dark-horse-sc-2022-f150-raptor-r-p100122","title":"Snyder Performance Engineering Intercooler Manifold - Stock -12AN (2020+ Shelby GT500 \/ 2026 Mustang Dark Horse SC \/ 2022+ F150 Raptor R) - P100122","description":"\u003cp\u003eThe Snyder Performance Engineering (SPE) intercooler manifold, part number P100122, replaces the factory blower water manifold on the supercharged 5.2L platform used in the Shelby GT500. This component sits under the supercharger lid and routes coolant into the intercooler. According to SPE, the original cast part was designed mainly for easy manufacturing and assembly, with flow as a secondary concern. SPE built its version around coolant flow to better meet the cooling demands of the intercooler. This listing is the Stock -12AN configuration, set up for the factory intercooler core with factory-size 3\/4 inch (-12) hose connections.\u003c\/p\u003e\n\u003cp\u003eMachined from 6061 billet aluminum with a hard anodized black finish, the manifold also adds a boost and vacuum reference port, which the factory engine lacks. SPE presents it as a worthwhile upgrade whether the car sees track sessions, weekend drives, or daily use. It is especially useful for modified GT500 owners who need a pressure signal for a boost gauge or a fuel pump pressure switch without modifying the blower lid.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachined from 6061 billet aluminum\u003c\/li\u003e\n\u003cli\u003eHard anodized black finish\u003c\/li\u003e\n\u003cli\u003eDesigned for increased coolant flow compared with the cast factory manifold\u003c\/li\u003e\n\u003cli\u003eStock -12AN configuration uses factory-size 3\/4 inch (-12) hose connections\u003c\/li\u003e\n\u003cli\u003eSPE supports both the factory and Whipple intercooler cores through configurable fittings and tubes\u003c\/li\u003e\n\u003cli\u003eOption to upgrade to -16 fittings for ice tank setups\u003c\/li\u003e\n\u003cli\u003eIntegrated pressure port for boost and vacuum reference\u003c\/li\u003e\n\u003cli\u003eStainless steel intercooler connection tubes, the same material Ford used on the factory tubes\u003c\/li\u003e\n\u003cli\u003eStock-style connection tubes measure .060 larger internally than the factory tubes\u003c\/li\u003e\n\u003cli\u003eKeeps a correctly sized coolant vent hose\u003c\/li\u003e\n\u003cli\u003eSeals with the original Ford gasket, not a custom o-ring\u003c\/li\u003e\n\u003cli\u003eShips with the fittings and hardware required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e6061 Billet Aluminum Construction with Hard Anodized Finish\u003c\/h3\u003e\u003cp\u003eFord's factory blower water manifold is a casting, and SPE notes that it was engineered for production and assembly efficiency rather than coolant flow. SPE machines its replacement from 6061 billet aluminum and finishes it with a hard anodized black coating.\u003c\/p\u003e\u003cp\u003eThe intercooler connection tubes are stainless steel, the same material as the original parts. They are also larger internally, with the stock-style tubes measuring .060 greater in internal size than the OEM tubes. To keep future maintenance simple, the manifold is designed to seal against the supercharger lid using the original Ford gasket. Because no hard-to-source custom o-ring is involved, replacing the seal is straightforward.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe main purpose of the SPE manifold is to move more coolant to the intercooler under the supercharger lid. It does this through a flow-focused billet design and larger internal-diameter connection tubes. The coolant vent hose remains properly sized, so the system's venting is not compromised.\u003c\/p\u003e\u003cp\u003eThe built-in pressure reference port solves a common problem on modified GT500s. Without a factory location to read boost or vacuum, adding a boost gauge or a fuel pump that relies on a pressure switch can be difficult. With this manifold, there is a dedicated port for that signal.\u003c\/p\u003e\u003cp\u003eThe fitting setup is flexible. This Stock -12AN version keeps the factory 3\/4 inch (-12) hose size, and SPE also supports -16 fittings for ice tank systems and the Whipple intercooler core for owners whose plans call for those setups.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe kit ships with the fittings, o-rings, plugs, hose ends, and hardware needed for installation\u003c\/li\u003e\n\u003cli\u003eThe manifold reuses the original Ford gasket, so no custom o-ring is required\u003c\/li\u003e\n\u003cli\u003eThe integrated pressure port eliminates the need to drill and tap the blower lid for a boost or vacuum reference\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces a cast factory part that SPE says was not designed with flow as the priority\u003c\/li\u003e\n\u003cli\u003eIncreases coolant delivery to the intercooler through larger internal-diameter stainless connection tubes\u003c\/li\u003e\n\u003cli\u003eAdds a boost and vacuum reference port for gauges or fuel pump pressure switches without modifying the blower lid\u003c\/li\u003e\n\u003cli\u003eUses the original Ford gasket, so replacement seals are easy to find\u003c\/li\u003e\n\u003cli\u003eSupports later upgrades, including -16 ice tank fittings and the Whipple intercooler core\u003c\/li\u003e\n\u003cli\u003eDurable 6061 billet aluminum with a hard anodized black finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2020-2022 Ford Mustang GT500\u003c\/li\u003e\n\u003cli\u003e2020-2026 Ford Mustang GT500\u003c\/li\u003e\n\u003cli\u003e2020-2026 Ford Mustang GT500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlower water manifold\u003c\/li\u003e\n\u003cli\u003eAll required fittings, o-rings, and plugs\u003c\/li\u003e\n\u003cli\u003e2 intercooler connection tubes\u003c\/li\u003e\n\u003cli\u003e2 hose ends\u003c\/li\u003e\n\u003cli\u003e2 ORB AN adapters\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Snyder Performance Engineering","offers":[{"title":"Default Title","offer_id":68306104221881,"sku":"SPE-P100122","price":380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/rwtewrtewertrwet.jpg?v=1794436147"},{"product_id":"roush-phase-2-supercharger-2024-2026-mustang-gt-422337","title":"Roush Phase 2 Supercharger (2024-2026 Mustang GT) - 422337","description":"\u003cp\u003eRoush 2024 Ford Mustang GT \/ Dark Horse 5.0L Phase 2 Supercharger Kit\u003c\/p\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003e422337\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68327182303417,"sku":"RSH422337","price":9995.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/1bf96be38969496c55026c6535812b11L.jpg?v=1794520145"},{"product_id":"roush-supercharger-810-hp-2026-mustang-gt-422350","title":"Roush Supercharger | 810 HP (2026 Mustang GT) - 422350","description":"\u003cp\u003eRoush 2024 Ford Mustang GT \/ Dark Horse 5.0L Air Intake System\u003c\/p\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003e422334\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68327182467257,"sku":"RSH422350","price":10399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/f002ca038eabf5ac7a80d0dc5173304aL.jpg?v=1794520148"},{"product_id":"ford-performance-gen-6-3-0l-supercharger-kit-800-hp-whipple-system-2024-2026-mustang-gt-and-dark-horse-m-6066-m8800","title":"Ford Performance Gen 6 3.0L Supercharger Kit - 800+ HP Whipple System (2024- 2026 Mustang GT \u0026 Dark Horse) - M-6066-M8800","description":"\u003cp\u003eFord Performance Parts is pleased to announce our supercharger kit for the 2024 5.0L Mustang GT and Dark Horse. Developed by Whipple Superchargers in partnership with Ford Performance Engineering, this kit delivers on performance. The Ford Performance package delivers 810 HP @ 7,500 RPM and 615 lb.-ft. of torque @ 4,800 RPM for active exhaust equipped Mustangs. (10 HP less for non-active exhaust).\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Performance EXCLUSIVE 3yr\/36k mile warranty when installed by a Ford dealer or ASE certified technician\u003c\/li\u003e\n\u003cli\u003eFactory strut tower brace is NOT compatible with the FPP supercharger kit\u003c\/li\u003e\n\u003cli\u003eWarranty when registered through the Ford Performance Parts Tech-line\u003c\/li\u003e\n\u003cli\u003eEngineered and tested to Ford Motor Company's rigorous standards\u003c\/li\u003e\n\u003cli\u003eEngineered and tested to Ford Motor Companys rigorous standards\u003c\/li\u003e\n\u003cli\u003eWhipple exclusive inverted twin screw design\u003c\/li\u003e\n\u003cli\u003eFord Performance Exclusive Calibration\u003c\/li\u003e\n\u003cli\u003eTomahawk calibration delivery tool\u003c\/li\u003e\n\u003cli\u003ePatented Dual Pass Intercooler\u003c\/li\u003e\n\u003cli\u003ePremium Fuel Required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang Dark Horse \/ GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eM-6066-M8800\u003c\/p\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68327182762169,"sku":"FRPM-6066-M8800","price":9712.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/766c22c5e74f922212825e1bbc8c02b5L.jpg?v=1794520151"},{"product_id":"turbosmart-bov-kompact-em-dual-port-2013-ford-fiesta-st-ecoboost-1-6l-2015-ford-mustang-2-3l-ts-0223-1066","title":"Turbosmart BOV Kompact EM Dual Port - 2013+ Ford Fiesta ST Ecoboost 1.6L\/ 2015+ Ford Mustang 2.3L - TS-0223-1066","description":"\u003cp\u003eThe award-winning Kompact EM series Blow-Off Valves, are the world's first truly plug and play Blow-Off Valves. Simply unplug and unbolt your OEM Blow-Off Valve, and install ours in its place. No adapters, hoses or extra assembly required. All this while retaining complete OE control of the BOV's operation. Turbocharger performance is increased due to minimizing leakage, rapid response, coupled with superior thermal performance thanks to our world-leading engineering and simulation abilities. A must-have for hybrid or larger flowing turbos that utilize OE electronic diverter valve by not leaking, the EM will achieve target boost without stressing the turbo charger and wastegate Dual Port vents both to the atmosphere and back into the air intake.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFitment Available in Plumback or Dual Port options\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eTS-0223-1066\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":68327182860473,"sku":"TS-0223-1066","price":315.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/f54e9eb57bdf778b2f821e528ccbfe87.jpg?v=1794520153"},{"product_id":"mishimoto-titanium-turbo-blanket-fits-ford-mustang-ecoboost-2015-mmtb-mus4-15","title":"Mishimoto Titanium Turbo Blanket, Fits Ford Mustang Ecoboost 2015+ - MMTB-MUS4-15","description":"\u003cp\u003eHelp reduce the heat in your 2015-2023 Ford Mustang EcoBoost engine bay with this Mishimoto turbo blanket. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces. That heat can severely affect intake air temperatures and rob your engine of power. Additionally, keeping the exhaust gases that spin your turbo hot makes for a more efficient, better spooling turbo. That's why it's so important to insulate the hot side of the turbocharger and keep the heat in. With Mishimoto's 2015-2023 Ford Mustang EcoBoost turbo blanket, the heat stays where it's supposed to be and out of your engine bay.Our turbo blankets are constructed with an outer layer of volcanic lava rock and titanium woven fabric. The inner layer traps heat with a high-silica fabric and stainless-steel mesh for maximum durability. This allows the interior layer to withstand over 2,300F (1,260C) while the outer layer protects against temperatures over 1,760F (960C). Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. This Mishimoto turbo blanket is a direct fit for the stock turbocharger equipped on your 2015-2023 Ford Mustang EcoBoost and is backed by our Mishimoto Lifetime Warranty for a lifetime of protection against engine bay heat.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInsulates turbo hot side to reduce engine bay temperatures and maintain turbocharger efficiency\u003c\/li\u003e\n\u003cli\u003eProtects vital cooling components from excessive heat\u003c\/li\u003e\n\u003cli\u003eInterior layer is rated to withstand 2,300F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang EcoBoost\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang EcoBoost\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang EcoBoost\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang EcoBoost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMTB-MUS4-15\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327183646905,"sku":"MISMMTB-MUS4-15","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/5ebc54e0a64383cb1e2f6d321bb012e7L.jpg?v=1794520163"},{"product_id":"gates-8-rib-heavy-duty-micro-v-serpentine-belt-2020-shelby-gt500","title":"Gates 8 Rib Heavy Duty Micro-V Serpentine Belt (2020+ Shelby GT500)","description":"\u003cp\u003eFleetRunner Heavy-Duty Micro-V belts are engineered to save your fleet money and reduce downtime. Patented EPDM construction with distinct green overcord is built specifically for more durability, superior flexibility, stability and longer life on heavy-duty drives. Haul more. Drive longer.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpecial compound provides unmatched flexibility, stability, load carrying capacity and belt life\u003c\/li\u003e\n\u003cli\u003ePatented material provides peak performance at prolonged extreme operating temperatures\u003c\/li\u003e\n\u003cli\u003eHeavy-duty construction resists cracking and wear, even at extreme temperatures\u003c\/li\u003e\n\u003cli\u003eConsistently outperforms other heavy-duty serpentine belts on the market\u003c\/li\u003e\n\u003cli\u003eEngineered to save your fleet money and reduce downtime\u003c\/li\u003e\n\u003cli\u003eProblem solver designed for the toughest applications\u003c\/li\u003e\n\u003cli\u003eTensioner Replacement is Recommended (if equipped)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2020-2026 Ford Mustang GT500\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eK080765HD\u003c\/p\u003e","brand":"Gates","offers":[{"title":"K080765HD","offer_id":68327183876281,"sku":"K080765HD","price":79.0,"currency_code":"USD","in_stock":true},{"title":"K080694HD","offer_id":68327183909049,"sku":"K080694HD","price":79.0,"currency_code":"USD","in_stock":true},{"title":"K080690HD","offer_id":68327183941817,"sku":"K080690HD","price":79.0,"currency_code":"USD","in_stock":true},{"title":"K080685HD","offer_id":68327183974585,"sku":"K080685HD","price":79.0,"currency_code":"USD","in_stock":true},{"title":"K080683HD","offer_id":68327184007353,"sku":"K080683HD","price":79.0,"currency_code":"USD","in_stock":true},{"title":"K080680HD","offer_id":68327184040121,"sku":"K080680HD","price":79.0,"currency_code":"USD","in_stock":true},{"title":"K080677HD","offer_id":68327184072889,"sku":"K080677HD","price":79.0,"currency_code":"USD","in_stock":true},{"title":"K080675HD","offer_id":68327184105657,"sku":"K080675HD","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/61-bklsmmxl._sl1500.jpg?v=1794520166"},{"product_id":"ford-performance-mustang-turbo-replacement-kit-2024-2026-mustang-2-3l-ecoboost-m-9438-mpc23","title":"Ford Performance Mustang Turbo Replacement Kit (2024-2026 Mustang 2.3L EcoBoost) - M-9438-MPC23","description":"\u003cp\u003eThe Ford Performance Parts turbo kit is built for 2024-2026 Ford Mustang (S650) applications. Fitment, specifications and options are listed below.\u003c\/p\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eM-9438-MPC23\u003c\/p\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68327184892089,"sku":"FRPM-9438-MPC23","price":1080.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/PI_M9438MAVU_v2.jpg?v=1794520175"},{"product_id":"moroso-supercharger-tank-ford-mustang-05-up-for-paxton-procharger-vortech-supercharger-kits","title":"Moroso supercharger tank, Ford Mustang ’05 - UP, for Paxton\/Procharger\/Vortech supercharger kits","description":"\u003cp\u003eMoroso 05-Up Ford Mustang (w\/Paxton\/Procharger\/Vortech Supercharger) Supercharger Tank\u003c\/p\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2005-2026 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003e63530\u003c\/p\u003e","brand":"Moroso","offers":[{"title":"Default Title","offer_id":68327230013625,"sku":"MOR63530","price":380.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/020456b6640ab9549960bc84c50b1c01.jpg?v=1794521132"},{"product_id":"mishimoto-intercooler-kit-silver-black-2024-mustang-ecoboost-2-3l-mmint-mus4-24kslbk","title":"Mishimoto Intercooler Kit - Silver \/ Black (2024+ Mustang EcoBoost 2.3L) - MMINT-MUS4-24KSLBK","description":"\u003cp\u003eUpgrade your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler and Pipe Kit, a complete system designed to maximize airflow, lower intake temps, and boost performance. This kit combines a direct-fit bar-and-plate intercooler with high-flow hot-side and cold-side aluminum pipes, delivering safe, tune-free power gains. -- The intercooler features cast aluminum end tanks and fits in the stock location with a 60% increase in core volume. Oversized 63mm inlets\/outlets improve flow, while a diverter plate ensures even air distribution. Foam sealing strips and a custom-formed air deflector maximize airflow through the core and reduce NVH. Four EPDM rubber sandwich mounts isolate vibration and add rigidity. Gains of up to 12 hp and 11 ft-lbs of torque are possible with no tuning, and a pre-drilled NPT port allows for auxiliary sensors or data logging. -- The included intercooler pipes are made from durable aluminum with cast connections for strength and precise fitment. A cast turbo outlet elbow integrates the blow-off valve seat and retains factory harness clipping points for a clean install. CNC-machined quick-disconnect fittings, DuraCore(TM) silicone couplers, high-torque worm-gear clamps, and an ID-matched transition coupler ensure secure, high-flow connections. Extra clearance also allows compatibility with the Mishimoto performance radiator. -- Available in polished or wrinkle black finishes, the Mishimoto Intercooler and Pipe Kit provides improved airflow, reduced intake temps, better underhood aesthetics, and long-term durability. Installation is straightforward with all hardware included, and every kit is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximized core in stock location below the crash bar to maintain even airflow and prevent heat pockets\u003c\/li\u003e\n\u003cli\u003eDesigned to mount to subframe with four rubber sandwich mounts for rigidity and vibration isolation\u003c\/li\u003e\n\u003cli\u003eCast end sections on both pipes provide a smooth transition for maximum airflow and precise fitment\u003c\/li\u003e\n\u003cli\u003eFoam strips and custom bottom air deflector maximize airflow and reduce noise and vibration levels\u003c\/li\u003e\n\u003cli\u003eIncludes CNC quick-disconnect fittings and high-torque worm-gear clamps for secure fitment\u003c\/li\u003e\n\u003cli\u003eDuraCore™ silicone couplers designed to withstand high temperature and boost pressures\u003c\/li\u003e\n\u003cli\u003eIntercooler available in silver or black for sharp aesthetics behind the grille\u003c\/li\u003e\n\u003cli\u003ePipes available in polished or wrinkle black finish for a clean underhood look\u003c\/li\u003e\n\u003cli\u003eID-matched transition coupler on cold side for smooth airflow into intercooler\u003c\/li\u003e\n\u003cli\u003eRobust bar-and-plate core with cast aluminum end tanks supports up to 526 hp\u003c\/li\u003e\n\u003cli\u003eDiverter plate in hot side end tank offers even airflow distribution\u003c\/li\u003e\n\u003cli\u003eGains of up to 12 hp and 11 ft-lbs of torque on a stock tune\u003c\/li\u003e\n\u003cli\u003eReduces charged-air temperatures at outlet by up to 60°F\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003ePatent Pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMINT-MUS4-24KSLBK\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327232503993,"sku":"MSH-MMINT-MUS4-24KSLBK","price":1290.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/ee412f2ab21cd3152b52e07be96808adL.jpg?v=1794521153"},{"product_id":"mishimoto-intercooler-kit-silver-polished-2024-mustang-ecoboost-2-3l-mmint-mus4-24kslp","title":"Mishimoto Intercooler Kit - Silver \/ Polished (2024+ Mustang EcoBoost 2.3L) - MMINT-MUS4-24KSLP","description":"\u003cp\u003eUpgrade your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler and Pipe Kit, a complete system designed to maximize airflow, lower intake temps, and boost performance. This kit combines a direct-fit bar-and-plate intercooler with high-flow hot-side and cold-side aluminum pipes, delivering safe, tune-free power gains. -- The intercooler features cast aluminum end tanks and fits in the stock location with a 60% increase in core volume. Oversized 63mm inlets\/outlets improve flow, while a diverter plate ensures even air distribution. Foam sealing strips and a custom-formed air deflector maximize airflow through the core and reduce NVH. Four EPDM rubber sandwich mounts isolate vibration and add rigidity. Gains of up to 12 hp and 11 ft-lbs of torque are possible with no tuning, and a pre-drilled NPT port allows for auxiliary sensors or data logging. -- The included intercooler pipes are made from durable aluminum with cast connections for strength and precise fitment. A cast turbo outlet elbow integrates the blow-off valve seat and retains factory harness clipping points for a clean install. CNC-machined quick-disconnect fittings, DuraCore(TM) silicone couplers, high-torque worm-gear clamps, and an ID-matched transition coupler ensure secure, high-flow connections. Extra clearance also allows compatibility with the Mishimoto performance radiator. -- Available in polished or wrinkle black finishes, the Mishimoto Intercooler and Pipe Kit provides improved airflow, reduced intake temps, better underhood aesthetics, and long-term durability. Installation is straightforward with all hardware included, and every kit is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximized core in stock location below the crash bar to maintain even airflow and prevent heat pockets\u003c\/li\u003e\n\u003cli\u003eCast end sections on both pipes provide a smooth transition for maximum airflow and precise fitment\u003c\/li\u003e\n\u003cli\u003eDesigned to mount to subframe with four rubber sandwich mounts for rigidity and vibration isolation\u003c\/li\u003e\n\u003cli\u003eFoam strips and custom bottom air deflector maximize airflow and reduce noise and vibration levels\u003c\/li\u003e\n\u003cli\u003eIncludes CNC quick-disconnect fittings and high-torque worm-gear clamps for secure fitment\u003c\/li\u003e\n\u003cli\u003eDuraCore™ silicone couplers designed to withstand high temperature and boost pressures\u003c\/li\u003e\n\u003cli\u003eIntercooler available in silver or black for sharp aesthetics behind the grille\u003c\/li\u003e\n\u003cli\u003eID-matched transition coupler on cold side for smooth airflow into intercooler\u003c\/li\u003e\n\u003cli\u003ePipes available in polished or wrinkle black finish for a clean underhood look\u003c\/li\u003e\n\u003cli\u003eRobust bar-and-plate core with cast aluminum end tanks supports up to 526 hp\u003c\/li\u003e\n\u003cli\u003eDiverter plate in hot side end tank offers even airflow distribution\u003c\/li\u003e\n\u003cli\u003eGains of up to 12 hp and 11 ft-lbs of torque on a stock tune\u003c\/li\u003e\n\u003cli\u003eReduces charged-air temperatures at outlet by up to 60°F\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003ePatent Pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMINT-MUS4-24KSLP\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327232700601,"sku":"MSH-MMINT-MUS4-24KSLP","price":1290.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/14399718bee88c0654ecff8ae68aa3b5L.jpg?v=1794521190"},{"product_id":"mishimoto-intercooler-kit-black-black-2024-mustang-ecoboost-2-3l-mmint-mus4-24kbkbk","title":"Mishimoto Intercooler Kit - Black\/Black (2024+ Mustang EcoBoost 2.3L) - MMINT-MUS4-24KBKBK","description":"\u003cp\u003eUpgrade your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler and Pipe Kit, a complete system designed to maximize airflow, lower intake temps, and boost performance. This kit combines a direct-fit bar-and-plate intercooler with high-flow hot-side and cold-side aluminum pipes, delivering safe, tune-free power gains. -- The intercooler features cast aluminum end tanks and fits in the stock location with a 60% increase in core volume. Oversized 63mm inlets\/outlets improve flow, while a diverter plate ensures even air distribution. Foam sealing strips and a custom-formed air deflector maximize airflow through the core and reduce NVH. Four EPDM rubber sandwich mounts isolate vibration and add rigidity. Gains of up to 12 hp and 11 ft-lbs of torque are possible with no tuning, and a pre-drilled NPT port allows for auxiliary sensors or data logging. -- The included intercooler pipes are made from durable aluminum with cast connections for strength and precise fitment. A cast turbo outlet elbow integrates the blow-off valve seat and retains factory harness clipping points for a clean install. CNC-machined quick-disconnect fittings, DuraCore(TM) silicone couplers, high-torque worm-gear clamps, and an ID-matched transition coupler ensure secure, high-flow connections. Extra clearance also allows compatibility with the Mishimoto performance radiator. -- Available in polished or wrinkle black finishes, the Mishimoto Intercooler and Pipe Kit provides improved airflow, reduced intake temps, better underhood aesthetics, and long-term durability. Installation is straightforward with all hardware included, and every kit is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximized core in stock location below the crash bar to maintain even airflow and prevent heat pockets\u003c\/li\u003e\n\u003cli\u003eCast end sections on both pipes provide a smooth transition for maximum airflow and precise fitment\u003c\/li\u003e\n\u003cli\u003eDesigned to mount to subframe with four rubber sandwich mounts for rigidity and vibration isolation\u003c\/li\u003e\n\u003cli\u003eFoam strips and custom bottom air deflector maximize airflow and reduce noise and vibration levels\u003c\/li\u003e\n\u003cli\u003eIncludes CNC quick-disconnect fittings and high-torque worm-gear clamps for secure fitment\u003c\/li\u003e\n\u003cli\u003eDuraCore™ silicone couplers designed to withstand high temperature and boost pressures\u003c\/li\u003e\n\u003cli\u003eIntercooler available in silver or black for sharp aesthetics behind the grille\u003c\/li\u003e\n\u003cli\u003eID-matched transition coupler on cold side for smooth airflow into intercooler\u003c\/li\u003e\n\u003cli\u003ePipes available in polished or wrinkle black finish for a clean underhood look\u003c\/li\u003e\n\u003cli\u003eRobust bar-and-plate core with cast aluminum end tanks supports up to 526 hp\u003c\/li\u003e\n\u003cli\u003eDiverter plate in hot side end tank offers even airflow distribution\u003c\/li\u003e\n\u003cli\u003eGains of up to 12 hp and 11 ft-lbs of torque on a stock tune\u003c\/li\u003e\n\u003cli\u003eReduces charged-air temperatures at outlet by up to 60°F\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003ePatent Pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMINT-MUS4-24KBKBK\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327232798905,"sku":"MSH-MMINT-MUS4-24KBKBK","price":1290.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/1953a5f113c74a3a14d3f2a305d15378L.jpg?v=1794521193"},{"product_id":"mishimoto-intercooler-kit-black-polished-2024-mustang-ecoboost-2-3l-mmint-mus4-24kbkp","title":"Mishimoto Intercooler Kit - Black \/ Polished (2024+ Mustang EcoBoost 2.3L) - MMINT-MUS4-24KBKP","description":"\u003cp\u003eUpgrade your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler and Pipe Kit, a complete system designed to maximize airflow, lower intake temps, and boost performance. This kit combines a direct-fit bar-and-plate intercooler with high-flow hot-side and cold-side aluminum pipes, delivering safe, tune-free power gains. -- The intercooler features cast aluminum end tanks and fits in the stock location with a 60% increase in core volume. Oversized 63mm inlets\/outlets improve flow, while a diverter plate ensures even air distribution. Foam sealing strips and a custom-formed air deflector maximize airflow through the core and reduce NVH. Four EPDM rubber sandwich mounts isolate vibration and add rigidity. Gains of up to 12 hp and 11 ft-lbs of torque are possible with no tuning, and a pre-drilled NPT port allows for auxiliary sensors or data logging. -- The included intercooler pipes are made from durable aluminum with cast connections for strength and precise fitment. A cast turbo outlet elbow integrates the blow-off valve seat and retains factory harness clipping points for a clean install. CNC-machined quick-disconnect fittings, DuraCore(TM) silicone couplers, high-torque worm-gear clamps, and an ID-matched transition coupler ensure secure, high-flow connections. Extra clearance also allows compatibility with the Mishimoto performance radiator. -- Available in polished or wrinkle black finishes, the Mishimoto Intercooler and Pipe Kit provides improved airflow, reduced intake temps, better underhood aesthetics, and long-term durability. Installation is straightforward with all hardware included, and every kit is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximized core in stock location below the crash bar to maintain even airflow and prevent heat pockets\u003c\/li\u003e\n\u003cli\u003eCast end sections on both pipes provide a smooth transition for maximum airflow and precise fitment\u003c\/li\u003e\n\u003cli\u003eDesigned to mount to subframe with four rubber sandwich mounts for rigidity and vibration isolation\u003c\/li\u003e\n\u003cli\u003eFoam strips and custom bottom air deflector maximize airflow and reduce noise and vibration levels\u003c\/li\u003e\n\u003cli\u003eIncludes CNC quick-disconnect fittings and high-torque worm-gear clamps for secure fitment\u003c\/li\u003e\n\u003cli\u003eDuraCore™ silicone couplers designed to withstand high temperature and boost pressures\u003c\/li\u003e\n\u003cli\u003eIntercooler available in silver or black for sharp aesthetics behind the grille\u003c\/li\u003e\n\u003cli\u003eID-matched transition coupler on cold side for smooth airflow into intercooler\u003c\/li\u003e\n\u003cli\u003ePipes available in polished or wrinkle black finish for a clean underhood look\u003c\/li\u003e\n\u003cli\u003eRobust bar-and-plate core with cast aluminum end tanks supports up to 526 hp\u003c\/li\u003e\n\u003cli\u003eDiverter plate in hot side end tank offers even airflow distribution\u003c\/li\u003e\n\u003cli\u003eGains of up to 12 hp and 11 ft-lbs of torque on a stock tune\u003c\/li\u003e\n\u003cli\u003eReduces charged-air temperatures at outlet by up to 60°F\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003ePatent Pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMINT-MUS4-24KBKP\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327232864441,"sku":"MSH-MMINT-MUS4-24KBKP","price":1290.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/d5c90bcaaa74946f1e44c92d0c6fae82L.jpg?v=1794521196"},{"product_id":"mishimoto-2024-ford-mustang-ecoboost-charge-pipes-wrinkle-black","title":"Mishimoto 2024+ Ford Mustang EcoBoost Charge Pipes - Wrinkle Black","description":"\u003cp\u003eUnleash more power and reliability from your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler Pipe Kit. Designed as a direct upgrade over the restrictive stock piping, this kit increases airflow for improved power and torque without the need for a tune. Constructed from durable aluminum, these pipes deliver long-lasting performance while enhancing underhood aesthetics with your choice of a polished or wrinkle black finish. -- DuraCore(TM) silicone couplers handle elevated boost pressures and temperature extremes, while an ID-matched transition coupler on the cold side for allows for smooth and even flow into the intercooler. High-torque worm-gear clamps keep everything secured, and additional clearance ensures compatibility with the Mishimoto performance radiator. This kit is designed to fit both the stock and Mishimoto intercoolers, making it a versatile upgrade for any EcoBoost build. -- The Mishimoto Intercooler Pipe Kit delivers improved airflow, durability, and style in one complete package, and like all Mishimoto products, it is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eImproves airflow for increased power and torque without a tune\u003c\/li\u003e\n\u003cli\u003eDurable aluminum construction for long-term reliability\u003c\/li\u003e\n\u003cli\u003eCompatible with stock and Mishimoto intercoolers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMICP-MUS4-24WBK\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327232995513,"sku":"MISMMICP-MUS4-24WBK","price":558.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/1f97bfe5a276193888207ef31539dce8L.jpg?v=1794521201"},{"product_id":"mishimoto-2024-ford-mustang-ecoboost-performance-intercooler-black","title":"Mishimoto 2024+ Ford Mustang EcoBoost Performance Intercooler - Black","description":"\u003cp\u003eTake your 2024+ Ford Mustang EcoBoost to the next level with the Mishimoto Performance Intercooler. Engineered for maximum cooling efficiency and reliability, this direct-fit intercooler is built to handle the demands of spirited driving while remaining safe to run on the stock tune. Featuring a robust bar-and-plate core with cast aluminum end tanks, it delivers improved airflow, reduced intake temperatures, and increased power for your EcoBoost Mustang. -- The Mishimoto intercooler boasts the largest possible core size that can fit in the stock location, providing a 60% increase in core volume compared to the factory unit. Oversized 63mm inlet and outlet diameters outflow the stock system for better charge air movement, while a diverter plate in the hot-side end tank promotes even airflow distribution across the core. Gains of up to 12 horsepower and 11 ft-lbs of torque can be achieved without any tuning required. -- Installation is simple and fully compatible with stock ducting and both OEM and Mishimoto intercooler pipes, with no cutting required. Foam sealing strips ensure maximum airflow through the core, and a custom vacuum-formed bottom air deflector improves underbody flow while reducing NVH thanks to its ribbed structure. To support the increased weight of the larger core, the intercooler mounts directly to the subframe using four EPDM rubber sandwich mounts, isolating vibration and increasing overall rigidity. -- Every intercooler comes equipped with a pre-drilled and tapped NPT sensor port for data logging or the addition of auxiliary sensors. All necessary hardware is included for a straightforward installation. -- The Mishimoto Performance Intercooler for the 2024+ Ford Mustang EcoBoost is built for enthusiasts who want lower intake temps, increased power, and a long-lasting solution to keep their Mustang running strong. Like all Mishimoto products, this intercooler is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximized core in stock location below the crash bar to maintain even airflow and prevent heat pockets\u003c\/li\u003e\n\u003cli\u003eFoam strips and custom bottom air deflector maximize airflow and reduce noise and vibration levels\u003c\/li\u003e\n\u003cli\u003eMounts to subframe with rubber sandwich mounts for vibration isolation and superior support\u003c\/li\u003e\n\u003cli\u003eRobust bar-and-plate core with cast aluminum end tanks supports up to 526 hp\u003c\/li\u003e\n\u003cli\u003eAvailable in silver or black for sharp aesthetics behind the grille\u003c\/li\u003e\n\u003cli\u003eGains of up to 12 hp and 11 ft-lbs of torque on a stock tune\u003c\/li\u003e\n\u003cli\u003eHot-side end tank features diverter plate for even airflow\u003c\/li\u003e\n\u003cli\u003eReduces charged-air temperatures at outlet by up to 60°F\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary hardware for installation\u003c\/li\u003e\n\u003cli\u003eImpressive 60% increased core size over stock\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003ePatent Pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMINT-MUS4-24BK\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327233159353,"sku":"MISMMINT-MUS4-24BK","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/d701c1893badaa39a8b848e951ba284aL.jpg?v=1794521208"},{"product_id":"mishimoto-2024-ford-mustang-2-3l-ecoboost-performance-intercooler-kit-black-black","title":"Mishimoto 2024+ Ford Mustang 2.3L EcoBoost Performance Intercooler Kit - Black\/Black","description":"\u003cp\u003eUpgrade your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler and Pipe Kit, a complete system designed to maximize airflow, lower intake temps, and boost performance. This kit combines a direct-fit bar-and-plate intercooler with high-flow hot-side and cold-side aluminum pipes, delivering safe, tune-free power gains. -- The intercooler features cast aluminum end tanks and fits in the stock location with a 60% increase in core volume. Oversized 63mm inlets\/outlets improve flow, while a diverter plate ensures even air distribution. Foam sealing strips and a custom-formed air deflector maximize airflow through the core and reduce NVH. Four EPDM rubber sandwich mounts isolate vibration and add rigidity. Gains of up to 12 hp and 11 ft-lbs of torque are possible with no tuning, and a pre-drilled NPT port allows for auxiliary sensors or data logging. -- The included intercooler pipes are made from durable aluminum with cast connections for strength and precise fitment. A cast turbo outlet elbow integrates the blow-off valve seat and retains factory harness clipping points for a clean install. CNC-machined quick-disconnect fittings, DuraCore(TM) silicone couplers, high-torque worm-gear clamps, and an ID-matched transition coupler ensure secure, high-flow connections. Extra clearance also allows compatibility with the Mishimoto performance radiator. -- Available in polished or wrinkle black finishes, the Mishimoto Intercooler and Pipe Kit provides improved airflow, reduced intake temps, better underhood aesthetics, and long-term durability. Installation is straightforward with all hardware included, and every kit is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximized core in stock location below the crash bar to maintain even airflow and prevent heat pockets\u003c\/li\u003e\n\u003cli\u003eCast end sections on both pipes provide a smooth transition for maximum airflow and precise fitment\u003c\/li\u003e\n\u003cli\u003eDesigned to mount to subframe with four rubber sandwich mounts for rigidity and vibration isolation\u003c\/li\u003e\n\u003cli\u003eFoam strips and custom bottom air deflector maximize airflow and reduce noise and vibration levels\u003c\/li\u003e\n\u003cli\u003eIncludes CNC quick-disconnect fittings and high-torque worm-gear clamps for secure fitment\u003c\/li\u003e\n\u003cli\u003eDuraCore™ silicone couplers designed to withstand high temperature and boost pressures\u003c\/li\u003e\n\u003cli\u003eIntercooler available in silver or black for sharp aesthetics behind the grille\u003c\/li\u003e\n\u003cli\u003eID-matched transition coupler on cold side for smooth airflow into intercooler\u003c\/li\u003e\n\u003cli\u003ePipes available in polished or wrinkle black finish for a clean underhood look\u003c\/li\u003e\n\u003cli\u003eRobust bar-and-plate core with cast aluminum end tanks supports up to 526 hp\u003c\/li\u003e\n\u003cli\u003eDiverter plate in hot side end tank offers even airflow distribution\u003c\/li\u003e\n\u003cli\u003eGains of up to 12 hp and 11 ft-lbs of torque on a stock tune\u003c\/li\u003e\n\u003cli\u003eReduces charged-air temperatures at outlet by up to 60°F\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003ePatent Pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMINT-MUS4-24KBKBK\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327233585337,"sku":"MISMMINT-MUS4-24KBKBK","price":1290.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/1953a5f113c74a3a14d3f2a305d15378L_43e6c427-db6b-42de-8994-8bb522219292.jpg?v=1794521222"},{"product_id":"mishimoto-2024-ford-mustang-2-3l-ecoboost-performance-intercooler-kit-silver-polished","title":"Mishimoto 2024+ Ford Mustang 2.3L EcoBoost Performance Intercooler Kit - Silver\/Polished","description":"\u003cp\u003eUpgrade your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler and Pipe Kit, a complete system designed to maximize airflow, lower intake temps, and boost performance. This kit combines a direct-fit bar-and-plate intercooler with high-flow hot-side and cold-side aluminum pipes, delivering safe, tune-free power gains. -- The intercooler features cast aluminum end tanks and fits in the stock location with a 60% increase in core volume. Oversized 63mm inlets\/outlets improve flow, while a diverter plate ensures even air distribution. Foam sealing strips and a custom-formed air deflector maximize airflow through the core and reduce NVH. Four EPDM rubber sandwich mounts isolate vibration and add rigidity. Gains of up to 12 hp and 11 ft-lbs of torque are possible with no tuning, and a pre-drilled NPT port allows for auxiliary sensors or data logging. -- The included intercooler pipes are made from durable aluminum with cast connections for strength and precise fitment. A cast turbo outlet elbow integrates the blow-off valve seat and retains factory harness clipping points for a clean install. CNC-machined quick-disconnect fittings, DuraCore(TM) silicone couplers, high-torque worm-gear clamps, and an ID-matched transition coupler ensure secure, high-flow connections. Extra clearance also allows compatibility with the Mishimoto performance radiator. -- Available in polished or wrinkle black finishes, the Mishimoto Intercooler and Pipe Kit provides improved airflow, reduced intake temps, better underhood aesthetics, and long-term durability. Installation is straightforward with all hardware included, and every kit is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximized core in stock location below the crash bar to maintain even airflow and prevent heat pockets\u003c\/li\u003e\n\u003cli\u003eCast end sections on both pipes provide a smooth transition for maximum airflow and precise fitment\u003c\/li\u003e\n\u003cli\u003eDesigned to mount to subframe with four rubber sandwich mounts for rigidity and vibration isolation\u003c\/li\u003e\n\u003cli\u003eFoam strips and custom bottom air deflector maximize airflow and reduce noise and vibration levels\u003c\/li\u003e\n\u003cli\u003eIncludes CNC quick-disconnect fittings and high-torque worm-gear clamps for secure fitment\u003c\/li\u003e\n\u003cli\u003eDuraCore™ silicone couplers designed to withstand high temperature and boost pressures\u003c\/li\u003e\n\u003cli\u003eIntercooler available in silver or black for sharp aesthetics behind the grille\u003c\/li\u003e\n\u003cli\u003eID-matched transition coupler on cold side for smooth airflow into intercooler\u003c\/li\u003e\n\u003cli\u003ePipes available in polished or wrinkle black finish for a clean underhood look\u003c\/li\u003e\n\u003cli\u003eRobust bar-and-plate core with cast aluminum end tanks supports up to 526 hp\u003c\/li\u003e\n\u003cli\u003eDiverter plate in hot side end tank offers even airflow distribution\u003c\/li\u003e\n\u003cli\u003eGains of up to 12 hp and 11 ft-lbs of torque on a stock tune\u003c\/li\u003e\n\u003cli\u003eReduces charged-air temperatures at outlet by up to 60°F\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003ePatent Pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMINT-MUS4-24KSLP\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327233716409,"sku":"MISMMINT-MUS4-24KSLP","price":1290.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/14399718bee88c0654ecff8ae68aa3b5L_e66744aa-4caf-4cdb-8a54-fa8de1ec00ef.jpg?v=1794521225"},{"product_id":"mishimoto-2024-ford-mustang-ecoboost-performance-intercooler-silver","title":"Mishimoto 2024+ Ford Mustang EcoBoost Performance Intercooler - Silver","description":"\u003cp\u003eTake your 2024+ Ford Mustang EcoBoost to the next level with the Mishimoto Performance Intercooler. Engineered for maximum cooling efficiency and reliability, this direct-fit intercooler is built to handle the demands of spirited driving while remaining safe to run on the stock tune. Featuring a robust bar-and-plate core with cast aluminum end tanks, it delivers improved airflow, reduced intake temperatures, and increased power for your EcoBoost Mustang. -- The Mishimoto intercooler boasts the largest possible core size that can fit in the stock location, providing a 60% increase in core volume compared to the factory unit. Oversized 63mm inlet and outlet diameters outflow the stock system for better charge air movement, while a diverter plate in the hot-side end tank promotes even airflow distribution across the core. Gains of up to 12 horsepower and 11 ft-lbs of torque can be achieved without any tuning required. -- Installation is simple and fully compatible with stock ducting and both OEM and Mishimoto intercooler pipes, with no cutting required. Foam sealing strips ensure maximum airflow through the core, and a custom vacuum-formed bottom air deflector improves underbody flow while reducing NVH thanks to its ribbed structure. To support the increased weight of the larger core, the intercooler mounts directly to the subframe using four EPDM rubber sandwich mounts, isolating vibration and increasing overall rigidity. -- Every intercooler comes equipped with a pre-drilled and tapped NPT sensor port for data logging or the addition of auxiliary sensors. All necessary hardware is included for a straightforward installation. -- The Mishimoto Performance Intercooler for the 2024+ Ford Mustang EcoBoost is built for enthusiasts who want lower intake temps, increased power, and a long-lasting solution to keep their Mustang running strong. Like all Mishimoto products, this intercooler is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximized core in stock location below the crash bar to maintain even airflow and prevent heat pockets\u003c\/li\u003e\n\u003cli\u003eFoam strips and custom bottom air deflector maximize airflow and reduce noise and vibration levels\u003c\/li\u003e\n\u003cli\u003eMounts to subframe with rubber sandwich mounts for vibration isolation and superior support\u003c\/li\u003e\n\u003cli\u003eRobust bar-and-plate core with cast aluminum end tanks supports up to 526 hp\u003c\/li\u003e\n\u003cli\u003eAvailable in silver or black for sharp aesthetics behind the grille\u003c\/li\u003e\n\u003cli\u003eGains of up to 12 hp and 11 ft-lbs of torque on a stock tune\u003c\/li\u003e\n\u003cli\u003eHot-side end tank features diverter plate for even airflow\u003c\/li\u003e\n\u003cli\u003eReduces charged-air temperatures at outlet by up to 60°F\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary hardware for installation\u003c\/li\u003e\n\u003cli\u003eImpressive 60% increased core size over stock\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003ePatent Pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMINT-MUS4-24SL\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327234764985,"sku":"MISMMINT-MUS4-24SL","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/3fcacb7ca28165fd62c3c5524752477eL.jpg?v=1794521227"},{"product_id":"mishimoto-2024-ford-mustang-ecoboost-charge-pipes-polished","title":"Mishimoto 2024+ Ford Mustang EcoBoost Charge Pipes - Polished","description":"\u003cp\u003eUnleash more power and reliability from your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler Pipe Kit. Designed as a direct upgrade over the restrictive stock piping, this kit increases airflow for improved power and torque without the need for a tune. Constructed from durable aluminum, these pipes deliver long-lasting performance while enhancing underhood aesthetics with your choice of a polished or wrinkle black finish. -- DuraCore(TM) silicone couplers handle elevated boost pressures and temperature extremes, while an ID-matched transition coupler on the cold side for allows for smooth and even flow into the intercooler. High-torque worm-gear clamps keep everything secured, and additional clearance ensures compatibility with the Mishimoto performance radiator. This kit is designed to fit both the stock and Mishimoto intercoolers, making it a versatile upgrade for any EcoBoost build. -- The Mishimoto Intercooler Pipe Kit delivers improved airflow, durability, and style in one complete package, and like all Mishimoto products, it is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eImproves airflow for increased power and torque without a tune\u003c\/li\u003e\n\u003cli\u003eDurable aluminum construction for long-term reliability\u003c\/li\u003e\n\u003cli\u003eCompatible with stock and Mishimoto intercoolers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMICP-MUS4-24P\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327234830521,"sku":"MISMMICP-MUS4-24P","price":558.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/a6e8c486d495d13a7fb1890566bad6beL.jpg?v=1794521228"},{"product_id":"mishimoto-2024-ford-mustang-2-3l-ecoboost-performance-intercooler-kit-silver-black","title":"Mishimoto 2024+ Ford Mustang 2.3L EcoBoost Performance Intercooler Kit - Silver\/Black","description":"\u003cp\u003eUpgrade your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler and Pipe Kit, a complete system designed to maximize airflow, lower intake temps, and boost performance. This kit combines a direct-fit bar-and-plate intercooler with high-flow hot-side and cold-side aluminum pipes, delivering safe, tune-free power gains. -- The intercooler features cast aluminum end tanks and fits in the stock location with a 60% increase in core volume. Oversized 63mm inlets\/outlets improve flow, while a diverter plate ensures even air distribution. Foam sealing strips and a custom-formed air deflector maximize airflow through the core and reduce NVH. Four EPDM rubber sandwich mounts isolate vibration and add rigidity. Gains of up to 12 hp and 11 ft-lbs of torque are possible with no tuning, and a pre-drilled NPT port allows for auxiliary sensors or data logging. -- The included intercooler pipes are made from durable aluminum with cast connections for strength and precise fitment. A cast turbo outlet elbow integrates the blow-off valve seat and retains factory harness clipping points for a clean install. CNC-machined quick-disconnect fittings, DuraCore(TM) silicone couplers, high-torque worm-gear clamps, and an ID-matched transition coupler ensure secure, high-flow connections. Extra clearance also allows compatibility with the Mishimoto performance radiator. -- Available in polished or wrinkle black finishes, the Mishimoto Intercooler and Pipe Kit provides improved airflow, reduced intake temps, better underhood aesthetics, and long-term durability. Installation is straightforward with all hardware included, and every kit is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximized core in stock location below the crash bar to maintain even airflow and prevent heat pockets\u003c\/li\u003e\n\u003cli\u003eDesigned to mount to subframe with four rubber sandwich mounts for rigidity and vibration isolation\u003c\/li\u003e\n\u003cli\u003eCast end sections on both pipes provide a smooth transition for maximum airflow and precise fitment\u003c\/li\u003e\n\u003cli\u003eFoam strips and custom bottom air deflector maximize airflow and reduce noise and vibration levels\u003c\/li\u003e\n\u003cli\u003eIncludes CNC quick-disconnect fittings and high-torque worm-gear clamps for secure fitment\u003c\/li\u003e\n\u003cli\u003eDuraCore™ silicone couplers designed to withstand high temperature and boost pressures\u003c\/li\u003e\n\u003cli\u003eIntercooler available in silver or black for sharp aesthetics behind the grille\u003c\/li\u003e\n\u003cli\u003ePipes available in polished or wrinkle black finish for a clean underhood look\u003c\/li\u003e\n\u003cli\u003eID-matched transition coupler on cold side for smooth airflow into intercooler\u003c\/li\u003e\n\u003cli\u003eRobust bar-and-plate core with cast aluminum end tanks supports up to 526 hp\u003c\/li\u003e\n\u003cli\u003eDiverter plate in hot side end tank offers even airflow distribution\u003c\/li\u003e\n\u003cli\u003eGains of up to 12 hp and 11 ft-lbs of torque on a stock tune\u003c\/li\u003e\n\u003cli\u003eReduces charged-air temperatures at outlet by up to 60°F\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003ePatent Pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMINT-MUS4-24KSLBK\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327234896057,"sku":"MISMMINT-MUS4-24KSLBK","price":1290.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/ee412f2ab21cd3152b52e07be96808adL_2b30557c-3173-45aa-a448-3da74b0e2ec0.jpg?v=1794521230"},{"product_id":"mishimoto-2024-ford-mustang-2-3l-ecoboost-performance-intercooler-kit-black-polished","title":"Mishimoto 2024+ Ford Mustang 2.3L EcoBoost Performance Intercooler Kit - Black\/Polished","description":"\u003cp\u003eUpgrade your 2024+ Ford Mustang EcoBoost with the Mishimoto Intercooler and Pipe Kit, a complete system designed to maximize airflow, lower intake temps, and boost performance. This kit combines a direct-fit bar-and-plate intercooler with high-flow hot-side and cold-side aluminum pipes, delivering safe, tune-free power gains. -- The intercooler features cast aluminum end tanks and fits in the stock location with a 60% increase in core volume. Oversized 63mm inlets\/outlets improve flow, while a diverter plate ensures even air distribution. Foam sealing strips and a custom-formed air deflector maximize airflow through the core and reduce NVH. Four EPDM rubber sandwich mounts isolate vibration and add rigidity. Gains of up to 12 hp and 11 ft-lbs of torque are possible with no tuning, and a pre-drilled NPT port allows for auxiliary sensors or data logging. -- The included intercooler pipes are made from durable aluminum with cast connections for strength and precise fitment. A cast turbo outlet elbow integrates the blow-off valve seat and retains factory harness clipping points for a clean install. CNC-machined quick-disconnect fittings, DuraCore(TM) silicone couplers, high-torque worm-gear clamps, and an ID-matched transition coupler ensure secure, high-flow connections. Extra clearance also allows compatibility with the Mishimoto performance radiator. -- Available in polished or wrinkle black finishes, the Mishimoto Intercooler and Pipe Kit provides improved airflow, reduced intake temps, better underhood aesthetics, and long-term durability. Installation is straightforward with all hardware included, and every kit is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaximized core in stock location below the crash bar to maintain even airflow and prevent heat pockets\u003c\/li\u003e\n\u003cli\u003eCast end sections on both pipes provide a smooth transition for maximum airflow and precise fitment\u003c\/li\u003e\n\u003cli\u003eDesigned to mount to subframe with four rubber sandwich mounts for rigidity and vibration isolation\u003c\/li\u003e\n\u003cli\u003eFoam strips and custom bottom air deflector maximize airflow and reduce noise and vibration levels\u003c\/li\u003e\n\u003cli\u003eIncludes CNC quick-disconnect fittings and high-torque worm-gear clamps for secure fitment\u003c\/li\u003e\n\u003cli\u003eDuraCore™ silicone couplers designed to withstand high temperature and boost pressures\u003c\/li\u003e\n\u003cli\u003eIntercooler available in silver or black for sharp aesthetics behind the grille\u003c\/li\u003e\n\u003cli\u003eID-matched transition coupler on cold side for smooth airflow into intercooler\u003c\/li\u003e\n\u003cli\u003ePipes available in polished or wrinkle black finish for a clean underhood look\u003c\/li\u003e\n\u003cli\u003eRobust bar-and-plate core with cast aluminum end tanks supports up to 526 hp\u003c\/li\u003e\n\u003cli\u003eDiverter plate in hot side end tank offers even airflow distribution\u003c\/li\u003e\n\u003cli\u003eGains of up to 12 hp and 11 ft-lbs of torque on a stock tune\u003c\/li\u003e\n\u003cli\u003eReduces charged-air temperatures at outlet by up to 60°F\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003ePatent Pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMINT-MUS4-24KBKP\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327234928825,"sku":"MISMMINT-MUS4-24KBKP","price":1290.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/d5c90bcaaa74946f1e44c92d0c6fae82L_b315c321-df87-486a-889d-c416ca44c34e.jpg?v=1794521231"}],"url":"https:\/\/engmustangs.com\/collections\/s650-forced-induction.oembed","provider":"ENG Mustangs","version":"1.0","type":"link"}