{"title":"S650 Mustang Cat-Back Exhaust","description":null,"products":[{"product_id":"kooks-3-valved-cat-back-exhaust-w-carbon-fiber-tips-2018-2026-mustang-gt-5-0l-part-11514520","title":"Kooks 3\" Valved Cat-Back Exhaust w\/ Carbon Fiber Tips – 2018–2026 Mustang GT 5.0L – Part #11514520","description":"\u003cp\u003eThe Kooks Valved Shotgun Cat-Back Exhaust is a complete 3-inch stainless steel exhaust system for the 2018-2024 Ford Mustang GT with the 5.0L 4V engine. It combines a 2-1\/4-inch by 3-inch H-pipe, 3-inch mid pipes and 3-inch rear pipes with valved Shotgun muffler sections and quad carbon fiber tips.\u003c\/p\u003e\n\u003cp\u003eIt is built for owners who want a full Kooks system behind the factory catalytic converters, with valved muffler sections and the build quality of a company that has focused on headers and exhaust since 1962.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-1\/4-inch x 3-inch H-pipe\u003c\/li\u003e\n\u003cli\u003e3-inch mid pipes and 3-inch rear pipes\u003c\/li\u003e\n\u003cli\u003eValved Shotgun muffler sections\u003c\/li\u003e\n\u003cli\u003eQuad carbon fiber tips\u003c\/li\u003e\n\u003cli\u003eT304 aircraft-quality stainless steel\u003c\/li\u003e\n\u003cli\u003eDyno and race tested, designed for maximum power\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Made in the USA\u003c\/h3\u003e\u003cp\u003eKooks builds this system from T304 aircraft-quality stainless steel, and every Kooks product is handcrafted in the USA. Kooks has been building headers and complete exhaust systems since 1962 and remains independently owned and operated, with three generations of family leadership.\u003c\/p\u003e\u003cp\u003eKooks products are dyno and race tested, and the company's parts have won championships and set records across NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, SCCA and other racing organizations.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe larger 3-inch tubing and H-pipe crossover are designed for maximum power, while the valved Shotgun muffler sections let the system change character between a quieter mode and a more open sound.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the entire factory cat-back with a matched Kooks system\u003c\/li\u003e\n\u003cli\u003eValved muffler sections for a more flexible sound\u003c\/li\u003e\n\u003cli\u003eCarbon fiber quad tips for a distinctive finish\u003c\/li\u003e\n\u003cli\u003eBacked by Kooks' limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2024 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLimited lifetime warranty to the original purchaser.\u003c\/p\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304222748857,"sku":"KSH11514520","price":2534.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/4ef901e4189062e523d66c398c1546ec_7e48991e-030b-4999-86f4-2b0f7789dd32.png?v=1794370748"},{"product_id":"kooks-full-3-stainless-steel-connection-adapter-2015-2026-mustang-gt-5-0l-part-11513010","title":"Kooks Full 3\" Stainless Steel Connection Adapter (2015–2026 Mustang GT 5.0L) – Part #11513010","description":"\u003cp\u003eThe Kooks Full 3\" Stainless Steel Connection Adapter, part number 11513010, joins Kooks headers or mid-pipes to a stock or stock-style rear exhaust on the 5.0L Mustang GT. It is fabricated from T304 stainless steel and keeps a full 3\" diameter through the transition, so the larger aftermarket piping does not have to neck down where it meets the cat-back.\u003c\/p\u003e\n\u003cp\u003eThis adapter is aimed at owners who have installed Kooks full 3\" long tube headers or mid-pipes but have not yet replaced the cat-back, and at anyone upgrading the exhaust in stages or replacing only part of the system. It addresses the mismatched connection points between those parts. Kooks notes that if you plan to run a complete Kooks system, a full cat-back is the better route and this adapter is not needed.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFull 3\" diameter maintained through the adapter to avoid stepping down to stock pipe sizing\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction for corrosion resistance on street or track cars\u003c\/li\u003e\n\u003cli\u003eMandrel-bent transitions with smooth internal surfaces to reduce turbulence\u003c\/li\u003e\n\u003cli\u003eDesigned to mate Kooks full 3\" headers or mid-pipes with stock or stock-style cat-back systems\u003c\/li\u003e\n\u003cli\u003eFixed design with no adjustability\u003c\/li\u003e\n\u003cli\u003eHelps keep pipe diameter consistent for exhaust scavenging; weight savings are minimal\u003c\/li\u003e\n\u003cli\u003eNo tuning or calibration required\u003c\/li\u003e\n\u003cli\u003eKooks part number 11513010\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eKooks builds this adapter from T304 stainless steel, a material chosen for its resistance to corrosion under both daily driving and track use. Compared with mass-produced factory adapters, the manufacturer states the stainless construction gives a tighter seal and better durability at the joint.\u003c\/p\u003e\u003cp\u003eThe transitions are mandrel bent, which keeps the internal surfaces smooth and the pipe diameter consistent through each bend. The adapter is a fixed piece rather than an adjustable one, so it is intended to locate the connection in a set position between the Kooks components and the rear exhaust.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBy carrying a full 3\" diameter from the Kooks headers or mid-pipes to the rear section, the adapter removes the restriction created when larger aftermarket piping is forced down to stock sizing. Kooks states the smooth mandrel-bent internals reduce turbulence and that the consistent diameter supports exhaust scavenging.\u003c\/p\u003e\u003cp\u003eKooks describes the weight savings from this part as minimal; its main purpose is a properly sealed, unrestricted connection between performance and stock-style components.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKooks states it installs without modification when pairing Kooks headers or mid-pipes with a factory or factory-style cat-back\u003c\/li\u003e\n\u003cli\u003eCorrect alignment with your existing exhaust system is required\u003c\/li\u003e\n\u003cli\u003eNo tuning or calibration is needed\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended if you are not experienced with exhaust fitment and sealing\u003c\/li\u003e\n\u003cli\u003eNot compatible with every aftermarket system; it is intended for Kooks full 3\" headers or mid-pipes used with stock or stock-style cat-backs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou have Kooks full 3\" long tube headers or mid-pipes and are still running a stock or stock-style cat-back\u003c\/li\u003e\n\u003cli\u003eIt resolves mismatched connection points between the aftermarket front section and the rear exhaust\u003c\/li\u003e\n\u003cli\u003eIt keeps a full 3\" path rather than reducing to stock pipe size at the joint\u003c\/li\u003e\n\u003cli\u003eT304 stainless construction suits both daily-driven and track cars\u003c\/li\u003e\n\u003cli\u003eIt lets you build or upgrade the exhaust in stages without replacing the entire system at once\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003enot compatible with all aftermarket systems\u003c\/li\u003e\n\u003cli\u003eWill not fit GT350, GT500, or EcoBoost models\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68304696508601,"sku":"KOO-11513010","price":56.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/0f6968d2ad301b42d6d3924d660d74b6_c773f5e0-1d78-4547-881e-290da4905b7b.png?v=1794374965"},{"product_id":"steeda-304-stainless-3-cat-back-exhaust-system-black-tips-2015-2017-mustang-gt-2024-2026-mustang-gt-w-o-active-exhaust-555-3615-b","title":"Steeda 304 Stainless 3\" Cat-Back Exhaust System - Black Tips (2015-2017 Mustang GT \/ 2024-2026 Mustang GT w\/o Active Exhaust) - 555-3615-B","description":"\u003cp\u003eThe Steeda 555-3615-B is a 3-inch cat-back exhaust system for the Coyote 5.0L-powered Ford Mustang GT. It is built from mandrel-bent 304 stainless steel, with stainless used throughout including the mufflers and tips, and it is TIG-welded and made in the USA. The system uses chambered mufflers that finish in 4-inch tips. It replaces the factory piping aft of the catalytic converters, which Steeda describes as restrictive and muted.\u003c\/p\u003e\n\u003cp\u003eSteeda designed this system for Mustang GT models that do not have the factory active exhaust, or for owners who are removing that system. According to Steeda, replacing the stock cat-back reduces backpressure, improves scavenging, and sharpens throttle response, while the chambered mufflers give a more aggressive tone without drone. It bolts up to the factory hanger locations and needs no tuning. That makes it a practical choice for GT owners who want better sound and flow without cutting or welding on a compatible car.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch mandrel-bent tubing for smooth, consistent airflow without crush bends\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction throughout the system, including mufflers and tips\u003c\/li\u003e\n\u003cli\u003eTIG-welded construction, made in the USA\u003c\/li\u003e\n\u003cli\u003eChambered mufflers tuned for an aggressive tone without drone\u003c\/li\u003e\n\u003cli\u003e4-inch exhaust tips\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on design that retains the factory hangers for proper alignment, with no adjustment required\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT models without factory active exhaust\u003c\/li\u003e\n\u003cli\u003eLighter than the factory system, according to Steeda, due to thinner, higher-quality steel\u003c\/li\u003e\n\u003cli\u003ePart number 555-3615-B\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304 Stainless Steel, TIG-Welded in the USA\u003c\/h3\u003e\u003cp\u003eSteeda forms this system from 3-inch 304 stainless steel tubing using mandrel bends rather than crush bends. Mandrel bending keeps the tube diameter constant through each bend, so exhaust flow stays smooth and consistent along the full length of the system.\u003c\/p\u003e\u003cp\u003eStainless steel is used throughout, not only in the piping but also in the chambered mufflers and the tips. All joints are TIG-welded, and the system is manufactured in the USA. Steeda positions it as durable enough for regular street driving and track use.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSteeda states that swapping out the factory cat-back lowers backpressure and improves exhaust scavenging, which produces a noticeable improvement in throttle response. The manufacturer does not publish specific horsepower or torque figures for this system.\u003c\/p\u003e\u003cp\u003eThe chambered mufflers replace the muted factory sound with a clean, crisp, more aggressive tone. Steeda says the design avoids drone and keeps the volume reasonable for daily driving.\u003c\/p\u003e\u003cp\u003eSteeda also states the system is lighter than the stock exhaust because it uses thinner, higher-quality steel. No specific weight figure is provided.\u003c\/p\u003e\u003cp\u003eNo additional components are required. Steeda notes that pairing the system with aftermarket headers or an H-pipe or X-pipe can complement it on a more extensive build.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on installation using the factory hanger locations\u003c\/li\u003e\n\u003cli\u003eFactory hangers are retained, so no adjustment is required for alignment\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required on compatible models\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eNot compatible with the factory active exhaust unless that system is removed\u003c\/li\u003e\n\u003cli\u003eNot intended for vehicles with different mid-pipe diameters, such as a base EcoBoost, or for mating to stock piping from a different trim\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to get precise tip alignment and proper torque on the sealing joints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the restrictive, muted factory cat-back with 3-inch mandrel-bent tubing for smoother flow\u003c\/li\u003e\n\u003cli\u003e304 stainless construction, including the mufflers and tips, for long-term durability\u003c\/li\u003e\n\u003cli\u003eChambered mufflers give a more aggressive tone without drone\u003c\/li\u003e\n\u003cli\u003eBolts to the factory hanger locations with no cutting, welding, or tuning on compatible cars\u003c\/li\u003e\n\u003cli\u003eA suitable option for GT owners whose cars lack active exhaust or who are deleting it\u003c\/li\u003e\n\u003cli\u003eProvides a foundation for later header or H-pipe\/X-pipe upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDoes not fit models with active exhaust unless that system is removed\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304716955833,"sku":"SDA-555-3615-B","price":1199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3615-1__95437_c3aab14e-e5a5-487c-b9ad-cbc6d4ed1298.jpg?v=1794436022"},{"product_id":"stainless-works-15-24-mustang-headers-stainless-power-aftermarket-connect-1-7-8in","title":"Stainless Works 15-24 Mustang Headers Stainless Power Aftermarket Connect 1-7\/8in.","description":"\u003cp\u003eThis Stainless Works header set is designed for 2015-2024 Ford Mustang applications and is built from stainless steel with 1-7\/8 in. tubing. It is part of the Stainless Power lineup and uses an aftermarket connect configuration, meaning it is intended to mate with an aftermarket exhaust system downstream instead of the factory components.\u003c\/p\u003e\n\u003cp\u003eHeaders replace the restrictive factory exhaust manifold and are often among the first exhaust upgrades for owners building a more capable street or track Mustang. If you already run an aftermarket exhaust or plan to install one, this aftermarket connect version from Stainless Works gives you a stainless header that is meant to tie into that setup.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless Works Stainless Power header\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003e1-7\/8 in. tube size\u003c\/li\u003e\n\u003cli\u003eAftermarket connect configuration for mating to an aftermarket exhaust system\u003c\/li\u003e\n\u003cli\u003eListed for 2015-2024 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works builds this header from stainless steel. The manufacturer's listing does not specify the grade of stainless used or other construction details.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory exhaust manifold with a stainless steel header\u003c\/li\u003e\n\u003cli\u003e1-7\/8 in. tubing as specified by Stainless Works\u003c\/li\u003e\n\u003cli\u003eAftermarket connect design suits Mustangs that already use, or will use, an aftermarket exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2024 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68304904159417,"sku":"SSWSM24H3CATLG","price":1519.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/b4f71b7f35508a9ccbba4b678cc2dc41L.jpg?v=1794436025"},{"product_id":"stainless-works-3-retro-chambered-cat-back-exhaust-system-w-h-pipe-performance-connect-2015-2017-mustang-gt-2026-mustang-gt-non-active-m15cb3-lmf","title":"Stainless Works 3\" Retro Chambered Cat-Back Exhaust System w\/ H-Pipe (Performance Connect) – 2015–2017 Mustang GT \/ 2026 Mustang GT Non-Active | M15CB3-LMF","description":"\u003cp\u003eThe Stainless Works M15CB3-LMF is a 3 inch Retro Chambered cat-back exhaust that includes a performance H-pipe. It is built from mandrel-bent, TIG-welded 304L stainless steel and is designed for non-active-exhaust Mustang GT models from both the S550 and S650 generations. Factory exhaust on these cars is crimped, restrictive, and quiet for a V8 that revs beyond 7,000 rpm. This system replaces those parts with larger, smoother tubing and chambered mufflers that bring a traditional muscle car character to the exhaust note.\u003c\/p\u003e\n\u003cp\u003eThis is a Performance Connect system. It is engineered to bolt directly to Stainless Works Performance Connect long tube headers, so it does not mate to stock headers or the factory mid-pipe. It suits owners who are building, or planning to build, a complete Stainless Works header-back exhaust and want a matched stainless system with a pronounced, old-school sound. Owners who are not planning a full exhaust build would be better served by a Factory Connect system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 inch mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003e304L stainless steel construction, described by the manufacturer as aircraft-grade\u003c\/li\u003e\n\u003cli\u003eTIG-welded assembly\u003c\/li\u003e\n\u003cli\u003eRetro Chambered mufflers for a hard-edged muscle car sound with drone kept to a minimum\u003c\/li\u003e\n\u003cli\u003ePerformance H-pipe intended to improve low-end torque and throttle response while balancing flow between banks\u003c\/li\u003e\n\u003cli\u003ePerformance Connect design that mates directly to Stainless Works Performance Connect long tube headers\u003c\/li\u003e\n\u003cli\u003eSlight weight reduction compared to stock, varying by trim and model year\u003c\/li\u003e\n\u003cli\u003eFor non-active exhaust Mustang GT models only\u003c\/li\u003e\n\u003cli\u003eManufacturer part number M15CB3-LMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304L Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works builds this system from 304L stainless steel, which the manufacturer specifies as aircraft-grade material. The alloy is chosen for its resistance to corrosion and its ability to tolerate heat and hard use over the life of the vehicle.\u003c\/p\u003e\u003cp\u003eAll tubing is mandrel bent at a 3 inch diameter, so the pipe keeps a consistent cross-section through every bend instead of collapsing the way crimped factory tubing does. Joints are TIG welded.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Retro Chambered mufflers give the GT a deep, assertive exhaust tone with a classic muscle car feel. Stainless Works says drone is kept to a minimum. The manufacturer is also clear that this is an aggressive setup, so drivers looking for a mild sound should consider a different system.\u003c\/p\u003e\u003cp\u003eStainless Works states that the H-pipe crossover strengthens low-end torque and sharpens throttle response while balancing flow. Together with the 3 inch mandrel-bent tubing, this is intended to improve flow over the restrictive factory components. No horsepower or torque figures are published.\u003c\/p\u003e\u003cp\u003eThe manufacturer notes a slight weight reduction compared with the stock exhaust, with the exact amount depending on trim and model year.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMust be installed with Stainless Works Performance Connect long tube headers. Direct fit applies only when paired with those headers.\u003c\/li\u003e\n\u003cli\u003eNot compatible with stock headers, the factory mid-pipe, or other stock exhaust components.\u003c\/li\u003e\n\u003cli\u003eNo tune is required for the cat-back alone, but a tune is strongly recommended when the system is run with headers.\u003c\/li\u003e\n\u003cli\u003eAll clamps and hardware are included.\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompletes a matched Stainless Works header-back exhaust when paired with Stainless Works Performance Connect long tube headers.\u003c\/li\u003e\n\u003cli\u003eReplaces crimped, restrictive factory tubing with 3 inch mandrel-bent 304L stainless pipe.\u003c\/li\u003e\n\u003cli\u003eRetro Chambered mufflers deliver a pronounced, traditional V8 sound for non-active GT owners who find the factory exhaust too subdued.\u003c\/li\u003e\n\u003cli\u003eThe H-pipe is intended to improve low-end torque and throttle response.\u003c\/li\u003e\n\u003cli\u003eTIG-welded 304L stainless construction is built to resist corrosion and handle heat.\u003c\/li\u003e\n\u003cli\u003eAll clamps and hardware are supplied with the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not fit active exhaust cars\u003c\/li\u003e\n\u003cli\u003eNot compatible with stock headers or factory mid-pipe—this is a matched system design\u003c\/li\u003e\n\u003cli\u003eNot compatible with stock exhaust components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 inch cat-back exhaust with performance H-pipe\u003c\/li\u003e\n\u003cli\u003eRetro Chambered mufflers\u003c\/li\u003e\n\u003cli\u003eAll clamps and hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless Works Performance Connect long tube headers (required, sold separately)\u003c\/li\u003e\n\u003cli\u003eEngine tune (strongly recommended when used with headers)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68304904716473,"sku":"SSWM15CB3-LMF","price":2085.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M15CB3-LMF_1.jpg?v=1794436027"},{"product_id":"corsa-performance-3-0-dual-rear-exit-xtreme-cat-back-exhaust-system-black-pvd-4-0-slash-cut-tips-2024-2026-mustang-gt-coupe-w-active-exhaust-21259blk","title":"Corsa Performance 3.0\" Dual Rear Exit Xtreme Cat-Back Exhaust System - Black PVD 4.0\" Slash Cut Tips (2024-2026 Mustang GT Coupe w\/ Active Exhaust) - 21259BLK","description":"\u003cp\u003eThe Corsa Performance 21259BLK is a 3.0 inch dual rear exit cat-back exhaust system from Corsa's Xtreme line, built for the S650 Mustang GT equipped with the factory active exhaust. It uses mandrel-bent T304 stainless steel tubing and an X-pipe, and it finishes with a pair of 4.0 inch slash-cut tips in a black PVD coating.\u003c\/p\u003e\n\u003cp\u003eThis system is for owners who want a noticeably louder, more aggressive exhaust note than stock without living with cabin drone on the highway. Corsa describes a deep growl at idle that builds into a hard-edged roar at wide-open throttle. It bolts on in place of the factory cat-back, and the black tips give the rear of the car a darker look.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorsa Xtreme cat-back exhaust system, part number 21259BLK\u003c\/li\u003e\n\u003cli\u003e3.0 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003eX-pipe intended to improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e4.0 inch slash-cut exhaust tips\u003c\/li\u003e\n\u003cli\u003eBlack PVD tip finish, described as corrosion resistant\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT models equipped with active exhaust\u003c\/li\u003e\n\u003cli\u003eXtreme sound level: deep growl at idle that builds to an aggressive roar at wide-open throttle\u003c\/li\u003e\n\u003cli\u003eEngineered by Corsa to avoid cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe system is made from T304 stainless steel, an alloy chosen for its durability. The tubing is mandrel bent, so the pipe keeps a consistent diameter through each bend. That protects flow and avoids the crimped sections found in compression-bent pipe.\u003c\/p\u003e\u003cp\u003eThe 4.0 inch slash-cut tips are also T304 stainless steel, finished with a black PVD coating. According to the manufacturer, the coating resists corrosion, so the tips should hold their appearance over time rather than serving only as a cosmetic add-on.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Xtreme designation puts this system at the aggressive end of Corsa's sound range. At idle it produces a deep, throaty growl. The volume and intensity rise as you accelerate and peak at wide-open throttle.\u003c\/p\u003e\u003cp\u003eCorsa states that the system is engineered to keep cabin drone out of the car. That means the aggressive tone should not turn into a constant low-frequency hum at steady cruising speeds.\u003c\/p\u003e\u003cp\u003eThe 3.0 inch mandrel-bent tubing and X-pipe are intended to optimize exhaust flow from the catalytic converters back through the dual rear exit tips.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBolt-on installation in place of the factory cat-back exhaust\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelivers a significantly more aggressive exhaust note than stock while being engineered to avoid cabin drone\u003c\/li\u003e\n\u003cli\u003eBuilt for GT models with the factory active exhaust system\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel with mandrel-bent tubing for durability and smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eX-pipe included in the design to help exhaust flow\u003c\/li\u003e\n\u003cli\u003eBlack PVD 4.0 inch slash-cut tips add a darker, corrosion-resistant finish to the rear of the car\u003c\/li\u003e\n\u003cli\u003eBolt-on design for owners who handle their own installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT, Fastback\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68304906289337,"sku":"COR21259BLK","price":2226.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21259_a_lowres_d8c442e2-9849-417f-bf63-c2054068ccc6.jpg?v=1794430760"},{"product_id":"valvetronic-designs-valved-sport-exhaust-system-dual-black-tips-2026-mustang-gt-frd-s650-gt-vses-br-dt-blk","title":"Valvetronic Designs Valved Sport Exhaust System - Dual Black Tips (2026 Mustang GT) - FRD-S650-GT-VSES-BR-DT-BLK","description":"\u003cp\u003eThe Valvetronic Designs Valved Sport Exhaust System is a cat-back exhaust for the 2026 Mustang GT that replaces the factory system with a valved design. It is built from T304 stainless steel and finished with dual 4-inch black tips. Electronic valves let the driver choose between an aggressive, open exhaust note and a more subdued tone, so one system can suit both spirited driving and quiet neighborhood cruising.\u003c\/p\u003e\n\u003cp\u003eThe system uses a free-flowing sport muffler intended to raise exhaust velocity and reduce backpressure, which the manufacturer says sharpens throttle response. The valves are controlled with a remote key fob or a hardwired switch, and the kit includes its own wiring harness and controller. Valvetronic Designs states that no tuning and no additional components are required. For S650 GT owners who want direct control over how their 5.0 sounds, this is a complete cat-back solution rather than a collection of separate mufflers or tips.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eValved cat-back exhaust system with electronically actuated valves\u003c\/li\u003e\n\u003cli\u003eValve control by remote key fob or wired switch\u003c\/li\u003e\n\u003cli\u003eWiring harness and controller for valve operation included\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eFree-flowing sport muffler design intended to improve exhaust velocity and reduce backpressure\u003c\/li\u003e\n\u003cli\u003eDual 4-inch black exhaust tips\u003c\/li\u003e\n\u003cli\u003eWeight comparable to the factory system; the focus is sound and performance tuning\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on using factory hanger locations and mid-pipe connection points\u003c\/li\u003e\n\u003cli\u003eCompatible with both manual and 10-speed automatic transmissions\u003c\/li\u003e\n\u003cli\u003eNo tuning required and no additional components needed\u003c\/li\u003e\n\u003cli\u003eManufacturer part number FRD-S650-GT-VSES-BR-DT-BLK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eValvetronic Designs builds this system from T304 stainless steel, a high-grade alloy chosen for its corrosion resistance and durability under hard use. That makes it a good fit for cars that see regular street miles and occasional track duty.\u003c\/p\u003e\u003cp\u003eThe dual 4-inch tips have a black finish that gives a low-key look at the rear of the car. The system installs at the factory hanger locations and mid-pipe connection points, so it bolts in where the original exhaust was mounted.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe main benefit of this system is adjustable sound. With the valves open, the exhaust gives an aggressive note suited to track days or back roads. With them closed, the tone is calmer for neighborhood driving and early starts. Valvetronic Designs says tone and flow are preserved in either position. The valves can be switched at any time from the key fob or the hardwired switch.\u003c\/p\u003e\u003cp\u003eThe sport muffler is designed to flow more freely than stock, increasing exhaust velocity and reducing backpressure. The manufacturer says this produces a noticeable improvement in throttle response. Weight is described as comparable to the factory system, so the gains come from flow and sound rather than weight reduction.\u003c\/p\u003e\u003cp\u003eOn cars equipped with the factory active exhaust, this system replaces the OEM setup entirely and uses Valvetronic's own valve control system in its place.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on design using factory hanger locations and mid-pipe connection points\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eNo additional components required\u003c\/li\u003e\n\u003cli\u003eIncludes a wiring harness and controller for valve operation\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended because of the valve wiring and the need to align the valves correctly\u003c\/li\u003e\n\u003cli\u003eOn vehicles with the OEM active exhaust, the factory valve system is replaced entirely by Valvetronic's valve control system\u003c\/li\u003e\n\u003cli\u003eWill not bolt up to 2023 or earlier Mustang models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLets you choose an aggressive or subdued exhaust note on demand instead of living with one fixed sound\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction resists corrosion for long-term durability\u003c\/li\u003e\n\u003cli\u003eSport muffler design is intended to improve exhaust flow and throttle response\u003c\/li\u003e\n\u003cli\u003eBolts in at the factory mounting points with no tune and no extra parts required\u003c\/li\u003e\n\u003cli\u003eIncludes the wiring harness and controller needed to operate the valves\u003c\/li\u003e\n\u003cli\u003eDual 4-inch black tips give a clean, understated rear appearance\u003c\/li\u003e\n\u003cli\u003eAs a complete cat-back system, it avoids the guesswork of combining separate mufflers and tips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT \/ EcoBoost\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with EcoBoost or Mach 1 models\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eValved sport cat-back exhaust system\u003c\/li\u003e\n\u003cli\u003eDual 4-inch black exhaust tips\u003c\/li\u003e\n\u003cli\u003eWiring harness for valve operation\u003c\/li\u003e\n\u003cli\u003eValve controller\u003c\/li\u003e\n\u003cli\u003eWired valve control switch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valvetronic Designs","offers":[{"title":"Default Title","offer_id":68304906387641,"sku":"VTD-FRD.S650.GT.VSES.BR.DT.BLK","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/gfdssgdfgdf.png?v=1794436036"},{"product_id":"afe-49-33072-1p-mach-force-xp-3-304-stainless-steel-cat-back-exhaust-system-with-polished-tips-2015-2017-mustang-gt-2026-mustang-gt-non-active","title":"aFe 49-33072-1P MACH Force-Xp 3\" 304 Stainless Steel Cat-Back Exhaust System with Polished Tips (2015-2017 Mustang GT \/ 2026 Mustang GT Non-Active)","description":"\u003cp\u003eThe aFe MACH Force-Xp 49-33072-1P is a cat-back exhaust system for the Ford Mustang GT, built around 3 inch T304 stainless steel tubing and finished with dual 4 inch polished tips. It replaces the factory exhaust from the catalytic converters back with mandrel-bent piping and an X-pipe, and it is intended for Mustang GT applications without the factory active exhaust.\u003c\/p\u003e\n\u003cp\u003eaFe designed this system to give the Coyote-powered GT a deeper, more aggressive exhaust note while improving exhaust flow, with tuning aimed at keeping cabin drone in check. For owners who want a stainless, bolt-on cat-back with a pronounced V8 tone and a polished finish at the rear bumper, the MACH Force-Xp offers a straightforward upgrade.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth, unrestricted exhaust flow\u003c\/li\u003e\n\u003cli\u003eX-pipe included in the system\u003c\/li\u003e\n\u003cli\u003eDual 4 inch exhaust tips with a polished finish\u003c\/li\u003e\n\u003cli\u003eDeep, resonant tone at idle that builds to a loud roar at wide-open throttle\u003c\/li\u003e\n\u003cli\u003eTuned to minimize in-cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on cat-back design for non-active exhaust Mustang GT applications\u003c\/li\u003e\n\u003cli\u003eaFe part number 49-33072-1P\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe entire system is fabricated from T304 stainless steel, chosen for its ability to withstand weather and road exposure and maintain its condition over years of use. The polished finish on the tips complements the stainless construction at the most visible point of the exhaust.\u003c\/p\u003e\u003cp\u003eaFe uses mandrel bending for the 3 inch tubing, which keeps the pipe diameter consistent through each bend instead of crimping or flattening it. This preserves a smooth internal path for exhaust gases from the converters to the tips.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eOn startup and at idle, the MACH Force-Xp produces a deep, resonant growl. As throttle input increases, the sound intensifies into an aggressive roar at wide-open throttle, giving the GT a pronounced V8 character that suits enthusiasts who want an assertive exhaust note.\u003c\/p\u003e\u003cp\u003eDespite the aggressive tone, aFe tuned the system to keep cabin drone under control, so the added volume does not translate into constant resonance at cruising speeds. The included X-pipe and mandrel-bent 3 inch tubing work together to improve exhaust flow compared to a more restrictive path.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a straightforward bolt-on cat-back installation\u003c\/li\u003e\n\u003cli\u003eX-pipe is included as part of the system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a noticeably deeper and more aggressive exhaust note from your Mustang GT at idle and under full throttle\u003c\/li\u003e\n\u003cli\u003eYou prefer a system tuned to limit cabin drone for more comfortable daily driving\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction offers long-term resistance to the elements\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 3 inch tubing and an X-pipe support improved exhaust flow\u003c\/li\u003e\n\u003cli\u003eDual 4 inch polished tips add a finished look to the rear of the car\u003c\/li\u003e\n\u003cli\u003eBolt-on design allows installation without the complexity of a custom exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eDual 4 inch polished exhaust tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":68304936206521,"sku":"AFE49-33072-1P","price":1461.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/49-33072-1p_1_1.jpg?v=1794376232"},{"product_id":"stainless-works-3-retro-chambered-cat-back-exhaust-w-x-pipe-factory-connect-2015-2017-and-2026-mustang-gt-non-active","title":"Stainless Works 3\" Retro Chambered Cat-Back Exhaust w\/ X-Pipe, Factory Connect – 2015–2017 \u0026 2026 Mustang GT (Non-Active)","description":"\u003cp\u003eStainless Works builds this 3-inch Retro Chambered cat-back, part number M15CB3LMF, for Coyote-powered Mustang GT owners who want a vintage muscle-car exhaust note on a modern car. The system pairs chambered mufflers with a 3-inch X-pipe crossover and uses the Factory Connect layout, so it mates to the stock mid-pipe and stock exhaust manifolds rather than requiring a long-tube header conversion.\u003c\/p\u003e\n\u003cp\u003eThe kit is intended for non-active-exhaust Mustang GTs that are staying with factory manifolds or a stock-style mid-pipe. Its mandrel-bent 304L stainless tubing is TIG-welded. The fixed layout lines up with the OEM connection points, so it bolts on without cutting or fabrication. Stainless Works says no tuning is needed, which makes it a practical upgrade if your goal is a classic chambered tone and better exhaust flow while the rest of the drivetrain stays stock.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRetro chambered mufflers tuned for a deep, aggressive muscle-car tone without high-pitched rasp\u003c\/li\u003e\n\u003cli\u003e3-inch mandrel-bent tubing in 304L stainless steel\u003c\/li\u003e\n\u003cli\u003eTIG-welded construction\u003c\/li\u003e\n\u003cli\u003e3-inch X-pipe crossover that balances exhaust pulses and improves scavenging\u003c\/li\u003e\n\u003cli\u003eFactory Connect design that bolts to the OEM mid-pipe with no header swap\u003c\/li\u003e\n\u003cli\u003eFixed layout that aligns with OEM connection points\u003c\/li\u003e\n\u003cli\u003eReuses the factory hangers\u003c\/li\u003e\n\u003cli\u003eStated by the manufacturer to be lighter than the OEM system, depending on trim\u003c\/li\u003e\n\u003cli\u003eNo additional components required when installed with the stock mid-pipe\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: M15CB3LMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304L Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works builds the system from 304L stainless steel, which the manufacturer describes as aircraft grade, and joins the sections with TIG welds. The manufacturer chose the material for corrosion resistance and long-term durability. That matters on an exhaust that sees heat cycles, road spray, and winter conditions.\u003c\/p\u003e\u003cp\u003eAll of the 3-inch tubing is mandrel bent, so the pipe keeps its full diameter through each bend for the best possible airflow. The layout is fixed and engineered to meet the factory connection points, so the system goes in as a direct bolt-on rather than needing adjustment or custom work.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe retro chambered mufflers give an old-school bark with a deep, aggressive character. According to Stainless Works, they avoid the drone and harshness typical of glasspack-style mufflers and the high-pitched rasp some aftermarket systems produce.\u003c\/p\u003e\u003cp\u003eThe 3-inch X-pipe crossover merges and balances exhaust pulses between the two banks. This improves scavenging and evens out the exhaust note across the rev range, and the manufacturer credits it with a sharper tone and improved performance. Stainless Works also says the system is lighter than the OEM exhaust, with the exact savings depending on trim.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on to the OEM mid-pipe; no cutting or fabrication required\u003c\/li\u003e\n\u003cli\u003eDesigned for stock exhaust manifolds or stock-style mid-pipes only\u003c\/li\u003e\n\u003cli\u003eReuses the factory hangers\u003c\/li\u003e\n\u003cli\u003eClamps and necessary hardware are included\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eNo additional components needed when installing with the stock mid-pipe\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended for proper fit and tip alignment\u003c\/li\u003e\n\u003cli\u003eNot for long-tube header setups; Stainless Works offers a separate Performance Connect version for that application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a classic chambered muscle-car exhaust note without the drone associated with glasspacks\u003c\/li\u003e\n\u003cli\u003eYou are keeping stock manifolds and want a bolt-on system that needs no header change, cutting, or tuning\u003c\/li\u003e\n\u003cli\u003eThe X-pipe crossover balances the note and improves exhaust scavenging compared with a non-crossover layout\u003c\/li\u003e\n\u003cli\u003eMandrel-bent, TIG-welded 304L stainless offers corrosion resistance and durability for long-term ownership\u003c\/li\u003e\n\u003cli\u003eIt reuses factory hangers and includes the clamps and hardware, keeping the install straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with active exhaust systems\u003c\/li\u003e\n\u003cli\u003eWill not fit Mustangs with active exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch Retro Chambered cat-back exhaust with X-pipe\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003cli\u003eNecessary installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68304936272057,"sku":"SSWM15CBX-LMF","price":2085.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M15CBX-LMF_1.jpg?v=1794436040"},{"product_id":"stainless-works-3-retro-chambered-cat-back-exhaust-w-x-pipe-performance-connect-2015-2017-and-2026-mustang-gt-non-active","title":"Stainless Works 3\" Retro Chambered Cat-Back Exhaust w\/ X-Pipe, Performance Connect – 2015–2017 \u0026 2026 Mustang GT (Non-Active)","description":"\u003cp\u003eThe Stainless Works 3\" Retro Chambered Cat-Back with X-Pipe, Performance Connect version, is a complete rear exhaust section for non-active Mustang GT models that already run Stainless Works long tube headers and the matching Performance Connect mid-pipe. It is fabricated from 304L stainless steel that is mandrel bent and TIG welded. The system pairs 3\" tubing with retro chambered mufflers and an X-pipe crossover, and it bolts directly to the Stainless Works header and mid-pipe combination. It is intended to finish a long tube build rather than act as a standalone upgrade for a stock exhaust.\u003c\/p\u003e\n\u003cp\u003eThe design brief is a deep, traditional muscle-car exhaust note from the chambered mufflers, without high-pitched rasp, while the X-pipe balances exhaust pulses between banks. Stainless Works describes this as an aggressive system for serious builds, not a mild one. Owners who have already committed to Stainless Works long tubes on a 2015 to 2017 or 2026 Mustang GT, and who do not want a stock-style cat-back limiting that setup, are the intended buyers. Anyone still running factory manifolds or a different mid-pipe should look at the Stainless Works Factory Connect version instead.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePerformance Connect design that bolts directly to Stainless Works long tube headers and the matching Stainless Works mid-pipe\u003c\/li\u003e\n\u003cli\u003e3\" tubing with a straight-through design, per the manufacturer\u003c\/li\u003e\n\u003cli\u003eRetro chambered mufflers tuned for a classic muscle-car tone without high-pitched rasp or drone, according to Stainless Works\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover to balance exhaust pulses and improve scavenging\u003c\/li\u003e\n\u003cli\u003e304L stainless steel, mandrel bent and TIG welded, for corrosion resistance and high-heat durability\u003c\/li\u003e\n\u003cli\u003eFixed fitment engineered specifically around the Stainless Works long tube and mid-pipe combination\u003c\/li\u003e\n\u003cli\u003eDescribed by the manufacturer as lighter than the stock cat-back, depending on trim\u003c\/li\u003e\n\u003cli\u003eClamps and hardware included; factory hangers are reused\u003c\/li\u003e\n\u003cli\u003eNo tuning required for this section of the exhaust\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: M15CB3X-LMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304L Mandrel-Bent, TIG-Welded Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works builds this cat-back from 304L stainless steel. The low-carbon 304L grade was chosen for its corrosion resistance and its ability to handle high exhaust temperatures, which matters on a car running long tube headers.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which keeps the 3\" diameter consistent through each bend, and the joints are TIG welded. Fitment is fixed rather than adjustable. The system is engineered to line up specifically with Stainless Works Performance Connect long tubes and the matching mid-pipe, so the complete exhaust works as one integrated package.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe retro chambered mufflers deliver a deep, old-school muscle-car exhaust note. Stainless Works says they avoid the high-pitched rasp some systems produce, and it describes the tone as free of drone. The manufacturer is equally clear that this is not a mild system. It is aimed at owners who want an assertive sound to match a long tube build.\u003c\/p\u003e\u003cp\u003eUpstream of the mufflers, the X-pipe crossover merges and balances the exhaust pulses from each cylinder bank. Stainless Works credits this with smoother revving and improved exhaust scavenging. Combined with the straight-through 3\" layout, the system is designed so the rear section does not restrict the flow gained from long tube headers and a performance mid-pipe.\u003c\/p\u003e\u003cp\u003eStainless Works also states that the system is lighter than the factory cat-back, with the amount of savings depending on trim.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires Stainless Works long tube headers and the matching Stainless Works Performance Connect mid-pipe\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on to the Stainless Works long tubes and mid-pipe; will not connect to factory exhaust manifolds, OEM mid-pipes, or other aftermarket mid-pipes\u003c\/li\u003e\n\u003cli\u003eFits non-active exhaust vehicles only\u003c\/li\u003e\n\u003cli\u003eClamps and hardware are included\u003c\/li\u003e\n\u003cli\u003eFactory exhaust hangers are reused\u003c\/li\u003e\n\u003cli\u003eNo tuning is required for this section of the exhaust\u003c\/li\u003e\n\u003cli\u003eProfessional installation is strongly recommended to achieve full alignment and integration with the header and mid-pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou already run Stainless Works long tube headers and the Performance Connect mid-pipe and want a cat-back engineered to bolt directly to them\u003c\/li\u003e\n\u003cli\u003eYou want a deep, traditional chambered-muffler exhaust note rather than a high-pitched or raspy tone\u003c\/li\u003e\n\u003cli\u003eThe X-pipe crossover balances exhaust pulses, which Stainless Works credits with smoother revving and better scavenging\u003c\/li\u003e\n\u003cli\u003e304L stainless, mandrel-bent and TIG-welded construction is built to resist corrosion and handle high heat over the long term\u003c\/li\u003e\n\u003cli\u003e3\" straight-through tubing avoids bottlenecking a full long tube exhaust with a stock-style rear section\u003c\/li\u003e\n\u003cli\u003eNo tuning is required for this section, and clamps and hardware are supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with factory manifolds or active exhaust\u003c\/li\u003e\n\u003cli\u003eNot compatible with OEM or other aftermarket mid-pipes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003cli\u003eHardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStainless Works long tube headers (required)\u003c\/li\u003e\n\u003cli\u003eMatching Stainless Works Performance Connect mid-pipe (required)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68304937451705,"sku":"SSWM15CB3X-LMF","price":2085.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M15CB3X-LMF_1.jpg?v=1794436044"},{"product_id":"steeda-304-stainless-3-cat-back-exhaust-system-polished-tips-2015-2017-mustang-gt-2024-2026-mustang-gt-w-o-active-exhaust-555-3615-c","title":"Steeda 304 Stainless 3\" Cat-Back Exhaust System - Polished Tips (2015-2017 Mustang GT \/ 2024-2026 Mustang GT w\/o Active Exhaust) - 555-3615-C","description":"\u003cp\u003eThe Steeda 555-3615-C is a 3 inch cat-back exhaust system for the Coyote 5.0L Mustang GT, built entirely from 304 stainless steel and finished with polished 4 inch tips. It takes the place of the factory piping and mufflers from the catalytic converters rearward, using mandrel-bent tubing and chambered mufflers to reduce backpressure and give the V8 a clearer, more assertive exhaust note than the muted stock system.\u003c\/p\u003e\n\u003cp\u003eThe system is designed for Mustang GT models that do not have the factory active exhaust, or for owners who are removing that system. It bolts up using the factory hanger locations, needs no cutting or welding on compatible cars, and does not require a tune. Owners who want stronger sound, a cleaner rear appearance, and freer exhaust flow without permanent modifications will find it a straightforward upgrade.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 inch mandrel-bent tubing that avoids crush bends and keeps the flow path smooth and consistent\u003c\/li\u003e\n\u003cli\u003eFull 304 stainless steel construction, including the mufflers and tips\u003c\/li\u003e\n\u003cli\u003eTIG-welded and made in the USA\u003c\/li\u003e\n\u003cli\u003eChambered mufflers tuned by Steeda for an aggressive tone that the manufacturer states is without drone\u003c\/li\u003e\n\u003cli\u003ePolished 4 inch exhaust tips\u003c\/li\u003e\n\u003cli\u003eRetains the factory hangers for proper alignment, with no adjustment required\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on for compatible models with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT models without factory active exhaust\u003c\/li\u003e\n\u003cli\u003ePart number 555-3615-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent, TIG-Welded 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds every part of this system from 304 stainless steel, including the mufflers and the tips as well as the tubing. The 3 inch piping is mandrel bent, so the tube keeps its full diameter through each bend instead of being pinched the way crush-bent tubing is.\u003c\/p\u003e\u003cp\u003eJoints are TIG welded, and the system is manufactured in the USA. Steeda states that the system is lighter than the factory exhaust because it uses thinner, higher-quality steel.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eReplacing the factory cat-back with this 3 inch system reduces backpressure and improves exhaust scavenging, which Steeda says sharpens throttle response. The mandrel-bent tubing keeps flow consistent throughout the run to the rear of the car.\u003c\/p\u003e\u003cp\u003eThe chambered mufflers replace the muffled factory sound with a crisp, aggressive tone that Steeda describes as free of drone. The note is strong enough to stand out without being excessive in daily driving.\u003c\/p\u003e\u003cp\u003eSteeda notes that the system can be paired with aftermarket headers or an H-pipe or X-pipe, although neither is required.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on installation using the factory hanger locations\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required on compatible models\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eFactory hangers are retained, so no adjustment is needed for alignment\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to get precise tip alignment and properly torqued, sealed connections\u003c\/li\u003e\n\u003cli\u003eWill not work with factory active exhaust setups unless that system is deleted\u003c\/li\u003e\n\u003cli\u003eNot intended for a base EcoBoost or a GT with a different mid-pipe diameter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the restrictive, muted factory cat-back with 3 inch mandrel-bent tubing for less backpressure\u003c\/li\u003e\n\u003cli\u003eFull 304 stainless construction, including the mufflers and tips, for long-term durability\u003c\/li\u003e\n\u003cli\u003eChambered mufflers provide a more aggressive tone that Steeda says is free of drone\u003c\/li\u003e\n\u003cli\u003ePolished 4 inch tips clean up the rear appearance of the car\u003c\/li\u003e\n\u003cli\u003eBolts in at the factory hanger locations with no cutting, welding, or tuning on compatible cars\u003c\/li\u003e\n\u003cli\u003eA practical choice for GT owners whose cars came without active exhaust or who are removing it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDoes not fit models with active exhaust unless that system is removed\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304940531897,"sku":"SDA-555-3615-C","price":1199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3615-1__95437.jpg?v=1794436050"},{"product_id":"awe-switchpath-catback-exhaust-quad-diamond-black-tips-2024-2026-mustang-dark-horse-3025-43375","title":"AWE SwitchPath Catback Exhaust - Quad Diamond Black Tips (2024-2026 Mustang Dark Horse) - 3025-43375","description":"\u003cp\u003eThe AWE SwitchPath Cat-Back Exhaust System for the Mustang Dark Horse, part number 3025-43375, replaces the factory exhaust from the catalytic converters back with a 3.0 inch CNC mandrel-bent T304 stainless steel system finished with quad Diamond Black 4 inch slash-cut tips. Its defining feature is AWE's SwitchPath valve control technology, which lets the driver change the exhaust character between a subdued cruising tone and a louder, more aggressive mode at the push of a button.\u003c\/p\u003e\n\u003cp\u003eThis system suits Dark Horse owners who want a single exhaust that can stay civil on the highway and open up for spirited driving or track sessions. It bolts on with basic hand tools and needs no cutting or welding. The Diamond Black tips pair with natural stainless piping for a finished look at the rear of the car, making it a practical upgrade in both sound control and appearance.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAWE SwitchPath valve control technology for switching between quiet and aggressive exhaust modes at the push of a button\u003c\/li\u003e\n\u003cli\u003e3.0 inch CNC mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003ePremium T304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eQuad Diamond Black 4 inch slash-cut exhaust tips\u003c\/li\u003e\n\u003cli\u003eNatural stainless finish on the piping\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 3025-43375\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel with CNC Mandrel-Bent Tubing\u003c\/h3\u003e\u003cp\u003eAWE builds this cat-back from premium T304 stainless steel. The piping is left in a natural stainless finish, while the four tips carry AWE's Diamond Black finish for contrast at the rear fascia.\u003c\/p\u003e\u003cp\u003eThe 3.0 inch tubing is CNC mandrel-bent, a process that holds a consistent pipe diameter through each bend rather than allowing the tube to crimp or flatten. The system is designed as a direct bolt-on for the Mustang Dark Horse, so it mounts without any cutting or welding to the vehicle.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith SwitchPath, the exhaust note is adjustable on demand. In its quieter setting the system is intended for relaxed cruising, and with the valves opened it moves to a more aggressive mode aimed at track and spirited use.\u003c\/p\u003e\u003cp\u003eAWE describes the sound in three stages. At idle, the system produces a deep rumble that is noticeable without being overbearing. Under acceleration, the tone stays rich and smooth while building in volume as revs climb. At wide open throttle, the note becomes powerful and aggressive.\u003c\/p\u003e\u003cp\u003eAccording to the manufacturer, the T304 stainless steel construction and 3.0 inch mandrel-bent tubing improve exhaust flow, with AWE claiming increased horsepower and torque along with sharper throttle response. No specific gain figures are provided.\u003c\/p\u003e\u003cp\u003eThe quad 4 inch slash-cut tips in Diamond Black give the rear of the Dark Horse a cleaner, more aggressive appearance.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required\u003c\/li\u003e\n\u003cli\u003eTypical installation time is around 2 to 3 hours\u003c\/li\u003e\n\u003cli\u003eCan be completed with basic hand tools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSwitchPath valve control lets you choose a quieter tone for daily driving or a louder, more aggressive note for spirited or track driving\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction with 3.0 inch CNC mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eQuad Diamond Black 4 inch slash-cut tips upgrade the look of the rear of the car\u003c\/li\u003e\n\u003cli\u003eBolt-on design installs in roughly 2 to 3 hours with basic hand tools and no cutting or welding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang Dark Horse\u003c\/li\u003e\u003c\/ul\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":68305044570297,"sku":"AWE3025-43375","price":3200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/3020-42375_12.jpg?v=1794430550"},{"product_id":"magnaflow-xmod-series-cat-back-performance-exhaust-system-2024-2026-mustang-dark-horse-19695","title":"Magnaflow XMod Series Cat-Back Performance Exhaust System (2024-2026 Mustang Dark Horse) - 19695","description":"\u003cp\u003eThe MagnaFlow xMOD Series Cat-Back Performance Exhaust System, part number 19695, is a fully modular exhaust built for the Mustang Dark Horse. It sits at the top of MagnaFlow's performance exhaust lineup and lets the owner change the car's exhaust character by swapping muffler modules. The system combines stainless steel construction, MagnaFlow's dyno-proven performance mufflers, and mandrel-bent tubing designed for efficient flow.\u003c\/p\u003e\n\u003cp\u003eThe core of the design is a set of interchangeable modules joined with race-derived v-band clamps. You can run MagnaFlow's straight-through Tru-H core mufflers for the brand's deep, aggressive signature tone, or remove those cores and fit the xMOD xTreme Delete Tru-H for a straight-pipe, race-car sound. MagnaFlow's No Drone Technology (NDT) is built into the system to reduce cabin drone, and the factory exhaust valve function is retained. For Dark Horse owners who want one cat-back that can be set up for both street and track sound, this system is a practical choice.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModular cat-back exhaust system from the MagnaFlow xMOD Series, part number 19695\u003c\/li\u003e\n\u003cli\u003eStainless steel construction, with stainless steel muffler bodies\u003c\/li\u003e\n\u003cli\u003eMandrel-bent pipes for smooth, high exhaust flow\u003c\/li\u003e\n\u003cli\u003eThree straight-through mufflers using MagnaFlow's Tru-H core design\u003c\/li\u003e\n\u003cli\u003eRace-derived v-band clamps for quick installation and removal of muffler modules\u003c\/li\u003e\n\u003cli\u003eCompatible with the xMOD xTreme Delete Tru-H, which replaces the Tru-H core muffler modules for a straight-pipe sound\u003c\/li\u003e\n\u003cli\u003eMagnaFlow No Drone Technology (NDT) combined with muffler design and placement to reduce drone\u003c\/li\u003e\n\u003cli\u003eRetains original equipment exhaust valve functionality\u003c\/li\u003e\n\u003cli\u003eHangers and mounting bracket included\u003c\/li\u003e\n\u003cli\u003eDescribed by MagnaFlow as emissions legal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Modular Construction\u003c\/h3\u003e\u003cp\u003eMagnaFlow builds the xMOD system from stainless steel, and the muffler bodies are stainless steel as well. The tubing is mandrel bent, which keeps the pipe diameter consistent through each bend so exhaust flow is not restricted. MagnaFlow covers this stainless construction with a lifetime warranty.\u003c\/p\u003e\u003cp\u003eThe modules connect with v-band clamps derived from racing applications. This joint style allows the Tru-H muffler modules to be taken out and reinstalled without cutting or welding. The system includes its own hangers and a mounting bracket.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe system uses three straight-through mufflers with MagnaFlow's Tru-H core, a design the manufacturer describes as dyno-proven. In the standard setup, the system produces MagnaFlow's signature exhaust note, which the company describes as deep and aggressive.\u003c\/p\u003e\u003cp\u003eFor a louder setup, the Tru-H core modules can be replaced with the xMOD xTreme Delete Tru-H, which gives a straight-pipe, race-car sound. MagnaFlow notes that although xMOD systems are emissions legal, running xTreme Deletes together with the xTreme Bypass is recommended for track use only, and owners should check local noise regulations before driving that configuration on the street.\u003c\/p\u003e\u003cp\u003eHigh-flow exhaust systems can create drone at cruising speeds. MagnaFlow addresses this with its No Drone Technology together with careful muffler design and placement. Because the system keeps the factory exhaust valve function, the original valve control is still available.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMuffler modules attach with v-band clamps, which MagnaFlow designed for quick installation and removal\u003c\/li\u003e\n\u003cli\u003eTru-H core muffler modules can be removed and replaced with the xMOD xTreme Delete Tru-H using the same v-band connections\u003c\/li\u003e\n\u003cli\u003eHangers and a mounting bracket are included with the system\u003c\/li\u003e\n\u003cli\u003eOriginal equipment exhaust valve functionality is retained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne cat-back can be reconfigured between MagnaFlow's signature tone and a straight-pipe sound by swapping modules instead of buying a separate exhaust\u003c\/li\u003e\n\u003cli\u003eV-band connections make switching between street and track configurations straightforward\u003c\/li\u003e\n\u003cli\u003eNo Drone Technology is intended to keep the cabin comfortable on long drives despite the high-flow design\u003c\/li\u003e\n\u003cli\u003eStainless steel construction is backed by a MagnaFlow lifetime warranty\u003c\/li\u003e\n\u003cli\u003eFactory exhaust valve function is preserved, so the car's original valve control remains available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang Dark Horse\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system with three straight-through mufflers\u003c\/li\u003e\n\u003cli\u003eHangers\u003c\/li\u003e\n\u003cli\u003eMounting bracket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMagnaFlow states that the stainless steel construction is covered by a lifetime warranty.\u003c\/p\u003e","brand":"MagnaFlow","offers":[{"title":"Default Title","offer_id":68305171710137,"sku":"MAG-19695","price":5255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/a00b438dff63fc517efc5e6a1945ede8_750x_e3d203f1-d10c-449a-a083-63d0e65a298c.jpg?v=1794436064"},{"product_id":"valvetronic-designs-valved-sport-exhaust-system-quad-black-tips-2026-mustang-gt-frd-s650-gt-vses-br-qt-blk","title":"Valvetronic Designs Valved Sport Exhaust System – Quad Black Tips (2026 Mustang GT) – FRD-S650-GT-VSES-BR-QT-BLK","description":"\u003cp\u003eThis Valvetronic Designs valved sport exhaust is a cat-back system for the S650 Mustang GT, finished with four 4-inch black tips that fill out the rear diffuser. It replaces the factory active exhaust entirely. Electronically actuated valves let the driver switch between a subdued tone and a fully open, throaty sound whenever they choose. The whole system is built from T304 stainless steel.\u003c\/p\u003e\n\u003cp\u003eThe system is aimed at owners who find the factory active exhaust too quiet, inconsistent in tone, or limited in valve control. Valvetronic Designs says the design reduces backpressure and sharpens throttle response compared with stock. It bolts on at the OEM hanger locations and requires no tuning. Because it is a complete system, it suits a car that will stay mostly stock and one that will later get headers and a tune.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eComplete valved cat-back system that replaces the factory active exhaust\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch black exhaust tips positioned to fill the rear diffuser\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction throughout\u003c\/li\u003e\n\u003cli\u003eElectronic valves operated by a remote key fob or a wired switch, per the manufacturer\u003c\/li\u003e\n\u003cli\u003eDual-mode sound: crisp and throaty with the valves open, quieter with the valves closed\u003c\/li\u003e\n\u003cli\u003eMuffler tuning focused on performance\u003c\/li\u003e\n\u003cli\u003eManufacturer states reduced backpressure and improved throttle response versus stock\u003c\/li\u003e\n\u003cli\u003eDescribed by the manufacturer as slightly lighter than the stock system\u003c\/li\u003e\n\u003cli\u003eFull wiring harness and control module included for valve actuation\u003c\/li\u003e\n\u003cli\u003eNo tuning and no additional components required\u003c\/li\u003e\n\u003cli\u003ePart number FRD-S650-GT-VSES-BR-QT-BLK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eValvetronic Designs builds this system entirely from T304 stainless steel. The manufacturer selected it to resist rust and hold up under hard driving, which matters for a part that sees heat cycles, road spray, and winter conditions underneath the car.\u003c\/p\u003e\u003cp\u003eThe tips are finished in black, and the quad 4-inch layout is designed to sit within the rear diffuser for a deliberate, factory-integrated look. Because the system mounts at the OEM hanger locations, it hangs in the factory positions.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe valves let you choose the exhaust note on the fly. With them open, the performance-tuned mufflers produce a crisp, throaty tone. With them closed, the sound drops to a more restrained level for commuting or quiet neighborhoods.\u003c\/p\u003e\u003cp\u003eValvetronic Designs says the system flows better than the factory exhaust, reducing backpressure and improving throttle response. No specific horsepower or torque figures are given. The manufacturer also describes the system as slightly lighter than stock, though it emphasizes improved flow and tone over weight savings.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on design that uses the OEM hanger locations\u003c\/li\u003e\n\u003cli\u003eFully replaces the factory active exhaust system\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eNo additional components required beyond what is supplied\u003c\/li\u003e\n\u003cli\u003eFull wiring harness and control module are included for valve actuation\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to ensure proper alignment and correct valve setup\u003c\/li\u003e\n\u003cli\u003eIntended to be installed as a complete system; the manufacturer advises against combining it with stock exhaust components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces a factory active exhaust that many owners find too quiet or inconsistent in tone\u003c\/li\u003e\n\u003cli\u003eGives you direct control over valve position, so you can run quiet or open depending on the situation\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction is chosen for corrosion resistance and durability\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch black tips fill the rear diffuser for a finished appearance\u003c\/li\u003e\n\u003cli\u003eBolts on at the factory hanger points with no tune required\u003c\/li\u003e\n\u003cli\u003eWorks as a foundation for later upgrades such as headers and tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT \/ Dark Horse \/ EcoBoost\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eValved cat-back exhaust system with quad 4-inch black tips\u003c\/li\u003e\n\u003cli\u003eFull wiring harness\u003c\/li\u003e\n\u003cli\u003eValve control module\u003c\/li\u003e\n\u003cli\u003eWired switch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Valvetronic Designs","offers":[{"title":"Default Title","offer_id":68305179115705,"sku":"VTD-FRD.S650.GT.VSES.BR.QT.BLK","price":2699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/gfdssgdfgdf_4a800d08-358b-40df-af5f-6ba5a85bb8dc.png?v=1794436066"},{"product_id":"ford-performance-m-5200-m4tca-2018-mustang-2-3l-ecoboost-touring-cat-back-chrome-tips","title":"Ford Performance M-5200-M4TCA 2018+ Mustang 2.3L Ecoboost Touring Cat Back (Chrome Tips)","description":"\u003cp\u003eThe Ford Performance M-5200-M4TCA is a Touring cat-back exhaust system for the 2.3L EcoBoost Mustang, finished with chrome tips. It replaces the factory exhaust from the catalytic converters rearward with a 304 stainless steel system built in the USA, using an integral Y-pipe and 2.25-inch mandrel-bent tubing. Ford Performance developed and tuned it with the goal of balancing performance, a more aggressive exhaust note, and long-term durability.\u003c\/p\u003e\n\u003cp\u003eFor EcoBoost Fastback and Convertible owners who want a more engaging exhaust character without giving up factory-style fit, this system bolts to the original catalytic converters and reuses the factory hangers and mounts. It sheds roughly 20 lbs. compared with the factory cat-back and, when installed on an otherwise unmodified vehicle, complies with the 95 dB drive-by sound limit that applies to aftermarket exhaust systems.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTouring cat-back exhaust system for the 2.3L EcoBoost Mustang\u003c\/li\u003e\n\u003cli\u003eChrome exhaust tips\u003c\/li\u003e\n\u003cli\u003eMade in the USA from 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eIntegral Y-pipe design\u003c\/li\u003e\n\u003cli\u003e2.25-inch stainless steel mandrel-bent cat-back tubing\u003c\/li\u003e\n\u003cli\u003eSmooth mandrel bends throughout\u003c\/li\u003e\n\u003cli\u003eWarp-free flanges\u003c\/li\u003e\n\u003cli\u003eBolts directly to the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eReuses factory hangers and mounts\u003c\/li\u003e\n\u003cli\u003eApproximately 20 lbs. lighter than the factory cat-back system\u003c\/li\u003e\n\u003cli\u003eComplies with the 95 dB drive-by sound limit for aftermarket exhausts when installed on an otherwise unmodified vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUSA-Made 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eFord Performance builds this cat-back in the USA from 304 stainless steel, an alloy chosen for its durability in exhaust applications. The tubing is mandrel bent, which keeps the bends smooth and consistent rather than crimped, and the flanges are made to resist warping so the joints continue to seal properly over time.\u003c\/p\u003e\u003cp\u003eThe system uses an integral Y-pipe that feeds 2.25-inch stainless mandrel-bent tubing, and Ford Performance emphasizes careful craftsmanship throughout the assembly.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eFord Performance tuned this system to deliver a more aggressive sound and a more involving driving experience than the factory exhaust, while still meeting the 95 dB drive-by sound limit for aftermarket exhaust systems when the car is otherwise unmodified.\u003c\/p\u003e\u003cp\u003eThe smooth mandrel bends and 2.25-inch tubing are part of the design intended for optimum performance, and the system weighs approximately 20 lbs. less than the factory cat-back, trimming weight from the rear of the car.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolts to the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eUses the factory hangers and mounts\u003c\/li\u003e\n\u003cli\u003eIntegral Y-pipe design for connection at the front of the system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory cat-back with USA-made 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eProvides a more aggressive exhaust note while staying within the 95 dB drive-by limit on an otherwise unmodified car\u003c\/li\u003e\n\u003cli\u003eRemoves approximately 20 lbs. compared with the factory system\u003c\/li\u003e\n\u003cli\u003eBolts to the original catalytic converters and reuses the factory hangers and mounts\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing and warp-free flanges support consistent fit and lasting sealing\u003c\/li\u003e\n\u003cli\u003eChrome tips give the rear of the car a finished appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018 Ford Mustang EcoBoost (2.3L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68305186455737,"sku":"FPP-M-5200-M4TCA","price":1673.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M-5200-M4TCA_6.jpg?v=1794436068"},{"product_id":"corsa-performance-3-0-extreme-cat-back-exhaust-hh-pipe-with-4-5-black-pvd-pro-series-quad-tips-2024-2026-mustang-dark-horse-21267blk-14502","title":"Corsa Performance 3.0\" Extreme Cat-Back Exhaust: HH-Pipe with 4.5\" Black PVD Pro Series Quad Tips (2024-2026 Mustang Dark Horse) 21267BLK-14502","description":"\u003cp\u003eThe Corsa Performance Xtreme Cat-Back Exhaust is a 3.0 inch stainless steel system for the Mustang Dark Horse. It replaces the factory exhaust from the catalytic converters back and finishes in 4.5 inch tips. It is built from T304 stainless steel with mandrel-bent tubing and uses a crossover pipe to improve exhaust flow. It bolts on, so it suits owners who do their own work.\u003c\/p\u003e\n\u003cp\u003eCorsa tunes the Xtreme system for the most aggressive sound in its lineup. It produces a deep growl at startup that gets louder through the rev range and ends in a hard-edged roar at wide-open throttle. Corsa says the system keeps drone out of the cabin. It is a good fit for Dark Horse owners who want a race-inspired exhaust note without the cruising noise that often comes with aggressive systems.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003e4.5 inch exhaust tips\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing to maintain flow through bends\u003c\/li\u003e\n\u003cli\u003eCrossover pipe included to improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eCat-back design with bolt-on installation\u003c\/li\u003e\n\u003cli\u003eXtreme sound level with an aggressive, race-inspired tone\u003c\/li\u003e\n\u003cli\u003eEngineered by Corsa to prevent cabin drone\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant tips\u003c\/li\u003e\n\u003cli\u003eCorsa Performance part number 21267BLK-14502\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds this system from T304 stainless steel, an alloy chosen for durability in an exhaust environment. The tubing is mandrel bent, so the 3.0 inch diameter stays consistent through each bend. Crush-bent pipe would narrow at those points and restrict flow.\u003c\/p\u003e\u003cp\u003eThe 4.5 inch tips are corrosion resistant, which helps them keep their appearance over time. The system bolts on, so it uses the existing mounting arrangement rather than requiring fabrication.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Xtreme is the most aggressive of Corsa's sound levels. At startup it settles into a deep, resonant growl. Under throttle the volume and intensity build steadily, peaking in a fierce roar at wide-open throttle.\u003c\/p\u003e\u003cp\u003eCorsa designed the system to keep cabin drone out, so the aggressive exterior sound does not carry into the cabin as fatigue on long drives.\u003c\/p\u003e\u003cp\u003eThe mandrel-bent 3.0 inch tubing and crossover pipe are meant to improve exhaust flow. Corsa links that to added horsepower and torque but does not publish specific figures.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBolt-on installation\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the most aggressive sound Corsa offers for the Dark Horse, with a clear build in volume toward wide-open throttle.\u003c\/li\u003e\n\u003cli\u003eYou want an aggressive exhaust without cabin drone at cruising speeds.\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and corrosion-resistant tips are built to hold up over time.\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 3.0 inch tubing and a crossover pipe improve exhaust flow over restrictive designs.\u003c\/li\u003e\n\u003cli\u003eBolt-on installation lets you do the work yourself.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang Dark Horse\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305190551737,"sku":"COR21267BLK-14502","price":3074.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21267_a_lowres_c6f735e9-8b45-4bb8-9120-df826762acf7.jpg?v=1794434164"},{"product_id":"corsa-performance-3-0-dual-rear-exit-xtreme-cat-back-exhaust-system-with-4-5-pro-series-tips-2024-2026-mustang-gt-coupe-w-non-active-exhaust-21250","title":"Corsa Performance 3.0” Dual Rear Exit Xtreme Cat-Back Exhaust System with 4.5” Pro Series Tips (2024-2026 Mustang GT Coupe w\/ Non-Active Exhaust) - 21250","description":"\u003cp\u003eThe Corsa Performance Xtreme Cat-Back Exhaust System, part number 21250, replaces the factory exhaust from the catalytic converters back on the S650 Mustang GT coupe equipped with the non-active exhaust. It is a dual rear exit design built around 3.0 inch mandrel-bent T304 stainless steel tubing, with an X-pipe and a pair of polished 4.5 inch Pro-Series tips.\u003c\/p\u003e\n\u003cp\u003eThe Xtreme is the more aggressive option in the Corsa lineup. Corsa describes a deep growl at idle that builds to its loudest at wide-open throttle, and says the system is designed to limit cabin drone at cruising speeds. It bolts on, so owners who do their own work can install it without permanently changing the car, and the polished tips give the rear of the car a cleaner finished look.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDual rear exit cat-back layout\u003c\/li\u003e\n\u003cli\u003e3.0 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing, which Corsa says improves exhaust flow and durability\u003c\/li\u003e\n\u003cli\u003eX-pipe included\u003c\/li\u003e\n\u003cli\u003e4.5 inch Pro-Series exhaust tips with polished finish\u003c\/li\u003e\n\u003cli\u003eXtreme sound level: deep tone at idle, building to its peak at wide-open throttle\u003c\/li\u003e\n\u003cli\u003eDesigned to limit cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003cli\u003eBuilt for Mustang GT coupes with the non-active exhaust\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 21250\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe system is built from T304 stainless steel. The tubing is mandrel bent, so it keeps a consistent 3.0 inch diameter through each bend instead of narrowing the way crush-bent pipe can. Corsa says this layout helps both exhaust flow and long-term durability.\u003c\/p\u003e\u003cp\u003eCorsa engineers the components to work together as one system, from the X-pipe at the front to the 4.5 inch Pro-Series tips at the rear. The tips have a polished finish to match the stainless construction.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCorsa describes the Xtreme sound as a deep, resonant growl at idle. The volume and intensity build as rpm rises and peak at wide-open throttle. The included X-pipe is part of how the system shapes that tone and flow.\u003c\/p\u003e\u003cp\u003eCorsa also says the Xtreme is designed to keep cabin drone under control. The goal is a car that sounds aggressive under load but is still comfortable to drive on the highway.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBolt-on design\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a noticeably more aggressive exhaust note than stock on a non-active exhaust Mustang GT coupe.\u003c\/li\u003e\n\u003cli\u003eYou want a louder system that is still designed to limit drone on long drives.\u003c\/li\u003e\n\u003cli\u003eThe X-pipe is already included, so you don't need to source one separately.\u003c\/li\u003e\n\u003cli\u003eThe T304 stainless steel and mandrel-bent 3.0 inch tubing are built for durability and smooth flow.\u003c\/li\u003e\n\u003cli\u003eThe polished 4.5 inch Pro-Series tips give the rear of the car a finished appearance.\u003c\/li\u003e\n\u003cli\u003eThe bolt-on design suits owners who install their own parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Ford Mustang GT, Fastback\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003e4.5 inch Pro-Series polished exhaust tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305191207097,"sku":"COR21250","price":1583.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21250_a_lowres.jpg?v=1794377576"},{"product_id":"magnaflow-xmod-series-cat-back-performance-exhaust-system-quad-black-tips-2026-mustang-gt","title":"MagnaFlow XMOD Series Cat-Back Performance Exhaust System (Quad Black Tips) – 2026 Mustang GT","description":"\u003cp\u003eThe MagnaFlow XMOD Series Cat-Back Performance Exhaust System, part number 19646, replaces the factory exhaust from the catalytic converters back on the 2026 Mustang GT. Its defining trait is a modular layout: interchangeable muffler and straight pipe sections let the owner change the volume and character of the Coyote V8's exhaust note instead of being locked into one sound. Straight-through, mandrel-bent piping, 409 stainless steel construction, and four 4.5-inch black-coated tips round out the package.\u003c\/p\u003e\n\u003cp\u003eFor S650 owners who find the stock system too subdued, the XMOD offers a way to run a more aggressive tone at wide-open throttle and return to a calmer setup when the situation calls for it. MagnaFlow describes it as a direct bolt-on that uses the factory connection points and needs no tune or added electronics. That makes it a practical choice whether the car stays on stock manifolds or is headed toward a broader bolt-on build, and for owners who move between daily driving, weekend cruising, and track days.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModular muffler design that can be run with or without mufflers for configurations ranging from aggressive to race mode\u003c\/li\u003e\n\u003cli\u003eInterchangeable straight pipe and muffler sections for custom sound profiles\u003c\/li\u003e\n\u003cli\u003eStraight-through, mandrel-bent piping intended to maximize exhaust velocity and reduce restriction\u003c\/li\u003e\n\u003cli\u003eReplaces the factory suitcase-style muffler, which MagnaFlow says improves throttle response and power delivery\u003c\/li\u003e\n\u003cli\u003eQuad 4.5-inch black-coated tips sized to fill the rear bumper cutouts\u003c\/li\u003e\n\u003cli\u003eBlack tip finish that MagnaFlow states resists fading and flaking under heat\u003c\/li\u003e\n\u003cli\u003e409 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eV-band clamps for switching between muffler and straight pipe configurations\u003c\/li\u003e\n\u003cli\u003eLighter than the factory suitcase-style muffler setup\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on using factory connection points, with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eNo additional components required\u003c\/li\u003e\n\u003cli\u003eMagnaFlow part number 19646\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e409 Stainless Steel Construction with V-Band Clamps\u003c\/h3\u003e\u003cp\u003eMagnaFlow builds the XMOD system from 409 stainless steel, a material chosen to cope with the heat and stress of hard driving. The piping is mandrel-bent, which keeps the tube diameter consistent through each bend, and the layout is straight-through to keep restriction low.\u003c\/p\u003e\u003cp\u003eSections are joined with V-band clamps rather than conventional bolted flanges. Beyond providing a secure joint, this makes the modular concept practical: swapping a muffler for a straight pipe section does not involve wrestling with seized, corroded hardware. The four 4.5-inch tips carry a black coating that the manufacturer says holds up to heat without fading or flaking.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound is the main reason to choose the XMOD. Because the mufflers can be installed or left out, one system covers a range of tones, from an aggressive street note to a more open race configuration. That flexibility suits owners who switch between street and track use and want a louder wide-open-throttle sound without being committed to it every day.\u003c\/p\u003e\u003cp\u003eIn place of the restrictive factory suitcase muffler, the straight-through, mandrel-bent design is engineered for higher exhaust velocity and less restriction, which MagnaFlow credits with sharper throttle response and improved power delivery compared to stock. MagnaFlow does not publish specific horsepower or torque figures for this system. The XMOD is also lighter than the factory suitcase-style muffler arrangement, although no exact weight figure is given.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on design; no cutting or welding is needed\u003c\/li\u003e\n\u003cli\u003eAttaches at the factory exhaust connection points\u003c\/li\u003e\n\u003cli\u003eThe engine does not need to be tuned after installation\u003c\/li\u003e\n\u003cli\u003eNothing electrical has to be added, including wiring, sensors, or modules\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to get proper tip alignment and for swapping modular sections\u003c\/li\u003e\n\u003cli\u003eDesigned for factory exhaust routing only; long tube headers will require custom fabrication\u003c\/li\u003e\n\u003cli\u003eMagnaFlow advises using the complete modular system rather than combining it with axle-back or partial sections, as mixing components will not deliver the same results\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a louder, more aggressive exhaust note than the stock system but still want the option to run a milder configuration\u003c\/li\u003e\n\u003cli\u003eYou split time between street driving and track days and want one system that adapts to both through interchangeable sections\u003c\/li\u003e\n\u003cli\u003eYou want to replace the factory suitcase muffler with a less restrictive straight-through, mandrel-bent design\u003c\/li\u003e\n\u003cli\u003eYou prefer an installation that bolts to factory connection points with no cutting, welding, tuning, or added electronics\u003c\/li\u003e\n\u003cli\u003eYou want the look of four 4.5-inch black tips filling the rear bumper cutouts\u003c\/li\u003e\n\u003cli\u003eYou value 409 stainless steel construction and V-band clamps that make reconfiguring the system straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT \/ Dark Horse\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNot compatible with convertibles or Dark Horse models\u003c\/li\u003e\n\u003cli\u003eDoes not fit convertible or Dark Horse trims\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MagnaFlow","offers":[{"title":"Default Title","offer_id":68305196318905,"sku":"MAG-19646","price":5143.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/19646_1500x_345f1cb2-f03c-471f-8100-96ff6cd1e898.jpg?v=1794436070"},{"product_id":"stainless-works-3-retro-chambered-cat-back-exhaust-system-w-h-pipe-factory-connect-2015-2017-mustang-gt-2026-mustang-gt-non-active-m15cb-lmf","title":"Stainless Works 3\" Retro Chambered Cat-Back Exhaust System w\/ H-Pipe (Factory Connect) – 2015–2017 Mustang GT \/ 2026 Mustang GT Non-Active | M15CB-LMF","description":"\u003cp\u003eThe Stainless Works M15CB-LMF is a 3 inch cat-back exhaust system for Coyote-powered S550 and S650 Mustang GT models that do not have the factory active exhaust. It pairs Retro Chambered mufflers with a Factory Connect H-pipe, all built from TIG-welded 304L stainless steel, and it bolts to the factory connection point so the original catalytic converters and mid-pipe stay in place.\u003c\/p\u003e\n\u003cp\u003eAccording to Stainless Works, the stock cat-back on these cars restricts flow and sounds too subdued for a V8. This system is meant to give owners a deeper chambered tone and improved throttle response without moving to long tube headers or cutting stock parts. It makes sense for a GT that is driven daily or on weekends, where the owner wants a stronger exhaust note and better flow while keeping the emissions hardware and avoiding a complicated install.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3 inch mandrel-bent tubing made from 304L stainless steel\u003c\/li\u003e\n\u003cli\u003eTIG-welded construction, described by the manufacturer as aircraft-grade\u003c\/li\u003e\n\u003cli\u003eRetro Chambered mufflers tuned for a classic muscle car tone, with drone kept to a minimum according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eFactory Connect H-pipe that mates to the stock mid-pipe; the manufacturer says it improves low-end torque and exhaust pulse balance\u003c\/li\u003e\n\u003cli\u003eBolt-on design that keeps the factory catalytic converters and mounts at the factory connection point\u003c\/li\u003e\n\u003cli\u003eNo adjustability built in, because the system is a direct factory-connect fit\u003c\/li\u003e\n\u003cli\u003eSlightly lighter than the factory system, per the manufacturer\u003c\/li\u003e\n\u003cli\u003eNo additional components required when used with the stock mid-pipe\u003c\/li\u003e\n\u003cli\u003ePart number M15CB-LMF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTIG-Welded 304L Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eStainless Works builds the entire system from 304L stainless steel and joins it with TIG welds, a material choice the manufacturer selected for durability over the long term. The 3 inch tubing is mandrel bent, so the inside diameter stays consistent through every bend rather than narrowing the way crush-bent pipe can.\u003c\/p\u003e\u003cp\u003eThe Retro Chambered mufflers are intended to recreate the sound of older muscle cars while using current construction methods. The system is engineered to mount directly at the factory connection point, which means it does not need adjustment hardware or fabrication to line up.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe chambered mufflers produce a deep, aggressive exhaust note that Stainless Works says carries little drone, so the system works on a daily driver as well as a weekend car. The manufacturer also states that the mandrel-bent 3 inch tubing allows smooth, unrestricted exhaust flow and that throttle response improves compared with the stock cat-back.\u003c\/p\u003e\u003cp\u003eThe Factory Connect H-pipe balances exhaust pulses between the two banks, which the manufacturer credits with better low-end torque. Stainless Works also notes a slight weight reduction over the factory system. No specific horsepower, torque, or sound level figures are published for this kit.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on that uses the factory mid-pipe and catalytic converter connections\u003c\/li\u003e\n\u003cli\u003eNo cutting, welding, or fabrication needed\u003c\/li\u003e\n\u003cli\u003eTuning is not necessary after installing this system\u003c\/li\u003e\n\u003cli\u003eThe manufacturer recommends professional installation to get the best fit and alignment\u003c\/li\u003e\n\u003cli\u003eWorks only with stock or factory-style mid-pipes; it will not line up with Performance Connect headers\u003c\/li\u003e\n\u003cli\u003eOwners planning to install long tube headers or remove the factory cats should choose the Performance Connect version of this system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the restrictive, quiet factory cat-back with a louder, freer-flowing 3 inch system\u003c\/li\u003e\n\u003cli\u003eKeeps the original catalytic converters and emissions equipment in place\u003c\/li\u003e\n\u003cli\u003eBolts to the factory connection point with no cutting, welding, or tuning\u003c\/li\u003e\n\u003cli\u003eChambered mufflers give a classic V8 sound with minimal drone, according to the manufacturer\u003c\/li\u003e\n\u003cli\u003e304L stainless steel tubing with TIG welds, built for durability over the long term\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWill not fit models with factory active exhaust\u003c\/li\u003e\n\u003cli\u003eNot compatible with active exhaust systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eHardware and clamps required for installation (per the manufacturer)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68305203396793,"sku":"SW-M15CB-LMF","price":2085.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M15CB-LMF_1.jpg?v=1794436074"},{"product_id":"ford-performance-sport-active-cat-back-chrome-tips-2024-2026-mustang-gt-m-5200-m5sc","title":"Ford Performance Sport Active Cat-Back - Chrome Tips  (2024-2026 Mustang GT) - M-5200-M5SC","description":"\u003cp\u003eThe Ford Performance Sport Active Cat-Back Exhaust System, part number M-5200-M5SC, is a complete replacement for the factory exhaust from the catalytic converters back on the 2024 and newer Mustang GT. It is built for cars equipped with active exhaust valves and works with those factory valves, so the driver can move the exhaust note from a restrained, refined tone to a far more aggressive one on demand. The system uses 3-inch mandrel-bent T304 stainless steel tubing and finishes in four 4-inch polished chrome tips that keep a clean, factory-style look at the rear of the car.\u003c\/p\u003e\n\u003cp\u003eFor owners of the current-generation Mustang GT, this system offers a deeper, more assertive exhaust character without giving up the comfort of a quieter mode for daily driving. It bolts onto the existing active valves and retains the factory valence, with no cutting or welding required. That makes it a practical choice for enthusiasts who want a noticeable change in sound and appearance from a factory-engineered part they can install in their own garage.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFord Performance part number M-5200-M5SC\u003c\/li\u003e\n\u003cli\u003eCat-back configuration with active exhaust compatibility\u003c\/li\u003e\n\u003cli\u003eWorks with the factory active exhaust valves for adjustable exhaust tone\u003c\/li\u003e\n\u003cli\u003e3-inch mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch tips in a polished chrome finish\u003c\/li\u003e\n\u003cli\u003eRetains the factory rear valence; no valence included\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eSound character described by the manufacturer as refined and deep at idle, a progressive growl under acceleration, and bold at wide open throttle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eFord Performance builds this cat-back from T304 stainless steel, a material commonly chosen for exhaust systems because of its resistance to corrosion. The tubing is 3 inches in diameter and mandrel bent, which keeps the pipe's diameter consistent through each bend rather than crimping it as conventional press bending can.\u003c\/p\u003e\u003cp\u003eThe system ends in four 4-inch tips finished in polished chrome. The tips are styled to look like original equipment, and the system is designed to work with the Mustang GT's factory valence and active exhaust valves rather than replacing them.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eFord Performance describes a sound profile that changes noticeably with throttle input. At idle the system produces a refined, sporty tone with audible depth. Under acceleration the note becomes a smooth, muscular growl that builds progressively as the throttle opens, and at wide open throttle it turns bold and assertive.\u003c\/p\u003e\u003cp\u003eBecause the system retains the factory active exhaust valves, the driver can choose between a more subdued tone for cruising and a more aggressive one for spirited driving. According to the manufacturer, the 3-inch mandrel-bent stainless tubing improves exhaust flow and overall throttle response compared with the stock system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on installation for the 2024 and newer Mustang GT with active exhaust\u003c\/li\u003e\n\u003cli\u003eTypical installation time is 2 to 3 hours\u003c\/li\u003e\n\u003cli\u003eRequires only basic hand tools\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required\u003c\/li\u003e\n\u003cli\u003eConnects to the existing active exhaust valves\u003c\/li\u003e\n\u003cli\u003eUses the factory rear valence\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a deeper, more aggressive exhaust note on your Mustang GT while keeping the ability to quiet it down through the factory active valves\u003c\/li\u003e\n\u003cli\u003eYou prefer T304 stainless steel construction with mandrel-bent 3-inch tubing over the stock system\u003c\/li\u003e\n\u003cli\u003eYou want quad 4-inch polished chrome tips that keep an original-equipment appearance\u003c\/li\u003e\n\u003cli\u003eYou plan to install it yourself and want a bolt-on system that needs no cutting or welding and reuses the factory valence\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68305205035193,"sku":"FPP-M-5200-M5SC","price":2697.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M-5200-M5SC_3.jpg?v=1794436074"},{"product_id":"corsa-performance-3-0-dual-rear-exit-xtreme-cat-back-exhaust-system-polished-4-0-slash-cut-tips-2024-2026-mustang-gt-coupe-w-active-exhaust-21259","title":"Corsa Performance 3.0\" Dual Rear Exit Xtreme Cat-Back Exhaust System - Polished 4.0\" Slash Cut Tips (2024-2026 Mustang GT Coupe w\/ Active Exhaust) - 21259","description":"\u003cp\u003eThe Corsa Performance Xtreme Cat-Back Exhaust System, part number 21259, is a 3.0 inch dual rear exit system for the S650 Mustang GT coupe equipped with the factory Active Exhaust. It is built from T304 stainless steel with mandrel-bent tubing and finishes in polished 4.0 inch slash-cut tips. An X-pipe is part of the system and is intended to improve exhaust flow.\u003c\/p\u003e\n\u003cp\u003eCorsa positions the Xtreme as the most aggressive voice in its lineup. It has a deep, throaty tone at idle that builds to a hard-edged roar under throttle, and Corsa engineered it to keep cabin drone in check. It is a bolt-on replacement for the factory cat-back. For owners who want a louder, more assertive exhaust note without living with drone on the highway, this system pairs that sound with durable stainless construction and a clean polished finish at the rear of the car.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorsa Performance Xtreme sound level, the brand's aggressive tone option\u003c\/li\u003e\n\u003cli\u003e3.0 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003ePolished 4.0 inch slash-cut exhaust tips\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eIntegrated X-pipe intended to improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eDesigned to control cabin drone\u003c\/li\u003e\n\u003cli\u003eConfigured for Mustang GT coupe models equipped with Active Exhaust\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 21259\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds the Xtreme cat-back from T304 stainless steel. The material is chosen for its strength and durability in an exhaust application that sees constant heat cycling and road exposure.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which keeps the pipe diameter consistent through each bend. Avoiding the crimped sections common to compression bending supports smooth, unrestricted flow through the 3.0 inch system. The polished 4.0 inch slash-cut tips finish the system with a bright, high-quality appearance at the rear fascia.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Xtreme sound profile starts with a deep, throaty growl at idle. It develops into a much more forceful roar as throttle is applied and becomes loud and commanding at wide-open throttle. It is intended for drivers who want the Coyote V8 to sound noticeably more aggressive than stock.\u003c\/p\u003e\u003cp\u003eCorsa designed this system to keep cabin drone under control. The goal is an aggressive exterior sound without the persistent interior resonance that can make highway driving tiresome.\u003c\/p\u003e\u003cp\u003eThe included X-pipe and mandrel-bent 3.0 inch tubing are intended to improve exhaust flow compared with a more restrictive path. Corsa does not publish specific horsepower or torque figures for this system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation that replaces the factory cat-back section\u003c\/li\u003e\n\u003cli\u003eConfigured for vehicles equipped with the factory Active Exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a substantially more aggressive exhaust note than stock or milder cat-back options\u003c\/li\u003e\n\u003cli\u003eYou want that louder sound with cabin drone kept under control for daily driving\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and mandrel-bent tubing provide durable, flow-friendly construction\u003c\/li\u003e\n\u003cli\u003eThe integrated X-pipe is included as part of the system\u003c\/li\u003e\n\u003cli\u003ePolished 4.0 inch slash-cut tips add a finished look to the rear of the car\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment means no permanent modification is described for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT, Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch dual rear exit cat-back exhaust system\u003c\/li\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003ePolished 4.0 inch slash-cut tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305207394489,"sku":"COR21259","price":2155.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21259_a_lowres.jpg?v=1794377598"},{"product_id":"corsa-performance-3-0-dual-rear-exit-xtreme-cat-back-exhaust-system-black-pvd-4-5-slash-tips-2024-2026-mustang-dark-horse-21265blk","title":"Corsa Performance 3.0\" Dual Rear Exit Xtreme Cat-Back Exhaust System - Black PVD 4.5\" Slash Tips (2024-2026 Mustang Dark Horse) - 21265BLK","description":"\u003cp\u003eThe Corsa Performance Xtreme Cat-Back Exhaust System, part number 21265BLK, is a 3.0-inch dual rear exit system built for the S650 Mustang Dark Horse. It is fabricated from T304 stainless steel with mandrel-bent tubing and uses an X-pipe to improve exhaust scavenging. The system finishes in a pair of 4.5-inch slash-cut tips with a black PVD coating.\u003c\/p\u003e\n\u003cp\u003eCorsa tuned the Xtreme version for an aggressive character. It has a deep growl at idle, builds as you open the throttle, and peaks in a hard-edged roar at wide-open throttle. Corsa states that the system is engineered to keep cabin drone in check. The bolt-on design makes it a practical upgrade for Dark Horse owners who want a louder, more assertive exhaust note in a stainless system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003e4.5-inch slash-cut exhaust tips\u003c\/li\u003e\n\u003cli\u003eBlack PVD tip finish\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eX-pipe included for improved exhaust scavenging\u003c\/li\u003e\n\u003cli\u003eXtreme sound level: deep growl at idle rising to an aggressive roar at wide-open throttle\u003c\/li\u003e\n\u003cli\u003eEngineered by Corsa to minimize cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 21265BLK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds this cat-back from T304 stainless steel, an alloy chosen for durability in exhaust applications. The tubing is mandrel bent, so the pipe keeps a consistent diameter through each bend instead of crimping. This construction supports both durability and flow.\u003c\/p\u003e\u003cp\u003eThe 4.5-inch slash-cut tips carry a black PVD finish, which gives the rear of the car a darker, finished look that suits the Dark Horse styling.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe system runs 3.0-inch tubing with an X-pipe, a layout Corsa uses to improve exhaust scavenging and optimize flow through the system. Corsa says the design is intended to help the engine make more horsepower and torque, but it does not publish specific gain figures for this part.\u003c\/p\u003e\u003cp\u003eWithin Corsa's range, the Xtreme sound level is the aggressive option. Expect a deep, resonant tone at idle that grows stronger under acceleration and peaks in a fierce roar at wide-open throttle. Corsa states that the system is designed to keep the cabin comfortable without drone while preserving that aggressive exhaust note.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBolt-on installation\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a noticeably more aggressive exhaust note than stock, with a deep idle and a strong wide-open-throttle sound.\u003c\/li\u003e\n\u003cli\u003eYou want an aggressive sound without the cabin drone that can make highway driving tiring, which Corsa says this system is engineered to address.\u003c\/li\u003e\n\u003cli\u003eThe T304 stainless steel and mandrel-bent tubing are built for durability.\u003c\/li\u003e\n\u003cli\u003eThe included X-pipe and 3.0-inch tubing are designed to improve exhaust scavenging and flow.\u003c\/li\u003e\n\u003cli\u003eThe 4.5-inch black PVD slash-cut tips complement the Dark Horse's darker styling.\u003c\/li\u003e\n\u003cli\u003eThe bolt-on design suits owners who do their own work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Ford Mustang Dark Horse\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang Dark Horse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eX-pipe\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305309761721,"sku":"COR21265BLK","price":2375.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21265_a_lowres_b68a04f7-c487-4b64-9b4c-23839dd92640.jpg?v=1794430774"},{"product_id":"borla-cat-back-exhaust-system-atak-black-chrome-quad-tips-2024-2026-mustang-dark-horse-140965bc","title":"Borla Cat-Back Exhaust System - ATAK - Black Chrome Quad Tips (2024-2026 Mustang Dark Horse) - 140965BC","description":"\u003cp\u003eThe Borla ATAK Cat-Back Exhaust System, part number 140965BC, is a complete rear exhaust upgrade for the Mustang Dark Horse. It is built from T304 stainless steel using 3-inch mandrel-bent tubing and an included X-pipe. The system finishes in four 5-inch black chrome tips. ATAK is Borla's most aggressive sound level, and this system replaces the factory cat-back components with a bolt-on assembly designed for the Dark Horse platform.\u003c\/p\u003e\n\u003cp\u003eThis system is aimed at Dark Horse owners who want a louder, more assertive exhaust note without living with cabin drone. Borla states the ATAK design delivers a deep growl at idle that builds to a full roar under throttle while keeping drone out of the cabin. The stainless construction is built for long-term durability, and the black chrome quad tips give the rear of the car a darker, more purposeful finish.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK cat-back exhaust system, part number 140965BC\u003c\/li\u003e\n\u003cli\u003e3-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth, unrestricted exhaust flow\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eX-pipe included to optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eQuad exhaust tips, each 5 inches in diameter\u003c\/li\u003e\n\u003cli\u003eBlack chrome tip finish\u003c\/li\u003e\n\u003cli\u003eAggressive ATAK sound profile with a deep idle growl and a strong roar under acceleration\u003c\/li\u003e\n\u003cli\u003eEngineered to minimize cabin drone\u003c\/li\u003e\n\u003cli\u003eDesigned for bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this cat-back from T304 stainless steel, chosen for durability in a component that sees constant heat cycling and road exposure. The tubing is mandrel-bent, which keeps the 3-inch diameter consistent through every bend instead of crimping or flattening it. That preserves the full cross-section along the length of the system.\u003c\/p\u003e\u003cp\u003eThe system includes an X-pipe, which Borla uses to optimize exhaust flow between the two banks. It ends in four 5-inch tips finished in black chrome, a darker alternative to polished stainless that suits the Dark Horse's styling.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe ATAK sound profile is the focus of this system. At idle it produces a deep, commanding growl, and it builds to a full roar as you open the throttle. Borla positions ATAK as its aggressive option for drivers who want the exhaust to be clearly heard.\u003c\/p\u003e\u003cp\u003eDespite that volume, Borla states the system is engineered to keep drone out of the cabin, so cruising is more tolerable than the sound level might suggest. The 5-inch quad tips also contribute to the finished tone.\u003c\/p\u003e\u003cp\u003eMandrel-bent 3-inch tubing and the included X-pipe are intended to maximize exhaust flow. The manufacturer associates this with improved horsepower and torque but does not publish specific figures.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a bolt-on installation\u003c\/li\u003e\n\u003cli\u003eX-pipe is included with the system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a noticeably more aggressive exhaust note than the factory Dark Horse system provides\u003c\/li\u003e\n\u003cli\u003eYou want that volume while keeping cabin drone under control on the highway\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction is built for long service life\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 3-inch tubing and an included X-pipe support efficient exhaust flow\u003c\/li\u003e\n\u003cli\u003eBlack chrome 5-inch quad tips give the rear of the car a darker, finished look\u003c\/li\u003e\n\u003cli\u003eBolt-on design suits owners who do their own work in the garage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Ford Mustang Dark Horse\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang Dark Horse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eX-pipe\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305310875833,"sku":"BOR140965BC","price":2764.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140965BC-main-1-xlarge.jpg?v=1794430347"},{"product_id":"mbrp-t304-stainless-steel-3-cat-back-quad-split-rear-exit-with-carbon-fiber-tips-active-2024-2026-mustang-dark-horse-5-0l-s72843cf","title":"MBRP T304 Stainless Steel, 3\" Cat-Back, Quad Split Rear Exit with Carbon Fiber Tips, Active (2024-2026 Mustang Dark Horse 5.0L) – S72843CF","description":"\u003cp\u003eThe MBRP S72843CF is a 3-inch cat-back exhaust system built from T304 stainless steel for the Dark Horse version of the current-generation Mustang with the 5.0L V8. It uses a quad split rear exit layout, with the outlets finished in carbon fiber tips, and MBRP designates the system as an active exhaust.\u003c\/p\u003e\n\u003cp\u003eThis system replaces the factory exhaust components downstream of the catalytic converters. It suits owners who want a stainless cat-back with a four-outlet rear exit and carbon fiber tip finish, built specifically for the 2024 and newer Mustang Dark Horse.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system configuration\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e3-inch system diameter\u003c\/li\u003e\n\u003cli\u003eQuad split rear exit layout\u003c\/li\u003e\n\u003cli\u003eCarbon fiber exhaust tips\u003c\/li\u003e\n\u003cli\u003eActive exhaust designation from MBRP\u003c\/li\u003e\n\u003cli\u003eManufacturer part number S72843CF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds the S72843CF from T304 stainless steel, a common austenitic stainless alloy used in aftermarket exhaust systems. The system is sized at 3 inches in diameter, and the outlets are finished with carbon fiber tips.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory cat-back with a system made from T304 stainless steel\u003c\/li\u003e\n\u003cli\u003eUses a 3-inch diameter throughout the cat-back design\u003c\/li\u003e\n\u003cli\u003eKeeps a quad split rear exit layout with carbon fiber tips for a distinctive rear appearance\u003c\/li\u003e\n\u003cli\u003eDesignated as an active exhaust and built specifically for the Mustang Dark Horse 5.0L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024-2026 Ford Mustang Dark Horse (5.0L)\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305314054329,"sku":"MBRPS72843CF","price":1994.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_426d6063-5f79-4b54-9c69-fffdbc798c0e.webp?v=1794435530"},{"product_id":"mbrp-t304-3-race-cat-back-exhaust-w-dual-split-rear-and-carbon-fiber-tips-2024-2026-mustang-gt-s72533cf","title":"MBRP T304 3\" Race Cat-Back Exhaust w\/ Dual Split Rear \u0026 Carbon Fiber Tips (2024-2026 Mustang GT) – S72533CF","description":"\u003cp\u003eThe MBRP S72533CF is a race-version cat-back exhaust for the S650 Mustang GT with the 5.0L Coyote V8. It is built from T304 stainless steel with 3-inch mandrel-bent tubing and a dual split rear exit finished with real carbon fiber tip sleeves. The design is aimed at owners who find the factory exhaust too quiet and restrictive, and who want a louder, more aggressive tone along with sharper throttle response.\u003c\/p\u003e\n\u003cp\u003eMBRP's race layout leaves out resonators. The goal is to increase exhaust velocity and cut backpressure, which the manufacturer says helps the engine rev more quickly and pull harder through the midrange. The system bolts into the factory hanger locations with no cutting, welding, or tuning required. That makes it a practical choice for a full bolt-on build or a straightforward sound and flow upgrade on a street car that also sees track time.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eT304 stainless steel tubing for corrosion resistance, including in wet or salted-road climates\u003c\/li\u003e\n\u003cli\u003eFull 3-inch mandrel-bent tubing for high flow and minimal restriction\u003c\/li\u003e\n\u003cli\u003eDual split rear exit layout\u003c\/li\u003e\n\u003cli\u003eReal carbon fiber tip sleeves\u003c\/li\u003e\n\u003cli\u003eRace configuration with no resonators for a deep, aggressive tone\u003c\/li\u003e\n\u003cli\u003eLighter than the factory exhaust, owing to cleaner pipe routing and fewer restrictions\u003c\/li\u003e\n\u003cli\u003eFixed, non-adjustable geometry tuned for high-flow performance\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment using factory hanger locations\u003c\/li\u003e\n\u003cli\u003eNo tuning, ECU reflash, additional hardware, or modules required\u003c\/li\u003e\n\u003cli\u003ePart number: S72533CF\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction with Carbon Fiber Tips\u003c\/h3\u003e\u003cp\u003eThe tubing is T304 stainless steel, which MBRP chose for its resistance to corrosion and hard use. The material is meant to hold up in salty or wet conditions, whether the car is a daily driver or sees regular track sessions.\u003c\/p\u003e\u003cp\u003eThe full 3-inch tubing is mandrel-bent, so the pipe keeps a consistent diameter through each bend instead of crimping. The rear of the car gets a dual split exit capped with real carbon fiber tip sleeves, which gives the S650 a distinct look compared with typical exhaust layouts. The system geometry is fixed and not adjustable. It was set for high-flow performance.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith no resonators in the system, the sound is a deep, aggressive growl that is much more pronounced than the stock exhaust. MBRP positions this as a race system, so expect a noticeably louder character than the factory setup.\u003c\/p\u003e\u003cp\u003eThe 3-inch mandrel-bent routing is intended to keep exhaust velocity up while reducing backpressure. According to MBRP, the result is quicker revving, stronger midrange pull, and improved throttle response from the 5.0L Coyote. The cleaner routing and reduced restriction also make the system lighter than the factory exhaust, although no specific weight figure is given.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolts directly into the factory hanger locations, with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eDoes not require an engine tune or ECU reprogramming\u003c\/li\u003e\n\u003cli\u003eNo separate modules or extra hardware need to be purchased for the install\u003c\/li\u003e\n\u003cli\u003eProfessional installation is advised for anyone without access to a lift or without prior exhaust work experience\u003c\/li\u003e\n\u003cli\u003eIf the car already has aftermarket headers or mid-pipes, confirm their mating flanges are compatible with this 3-inch system\u003c\/li\u003e\n\u003cli\u003eThis race system has no valve integration and will not work with the factory active exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the quiet, restrictive factory exhaust with a resonator-free race system that has a much more aggressive tone\u003c\/li\u003e\n\u003cli\u003e3-inch mandrel-bent tubing is designed to improve exhaust flow and throttle response\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction suits cars driven year-round or used on track\u003c\/li\u003e\n\u003cli\u003eThe dual split rear exit with real carbon fiber tips gives the rear of the car a distinctive finish\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no fabrication or tuning keeps the upgrade simple\u003c\/li\u003e\n\u003cli\u003eA good fit for a bolt-on build where sound and flow are priorities over a quieter daily-driver setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWill not fit EcoBoost or Dark Horse models\u003c\/li\u003e\n\u003cli\u003eNot compatible with factory active exhaust systems—this is a race system with no valve integration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305314283705,"sku":"MBRPS72533CF","price":1134.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_859d49a4-c779-4e8c-ac12-9ae5312b3ea3.webp?v=1794435528"},{"product_id":"awe-switchpath-catback-exhaust-quad-diamond-black-tips-2024-2026-mustang-gt-3025-43650","title":"AWE SwitchPath Catback Exhaust - Quad Diamond Black Tips (2024-2026 Mustang GT) - 3025-43650","description":"\u003cp\u003eThe AWE Tuning SwitchPath Cat-Back Exhaust (part number 3025-43650) is a complete rear exhaust system for the current-generation Ford Mustang GT. It uses 3-inch T304 stainless steel tubing that is mandrel bent and finishes in four 4-inch tips with a Diamond Black finish. An H-pipe is part of the package, so the system replaces both the rear section and the crossover.\u003c\/p\u003e\n\u003cp\u003eAWE built this system to give the Coyote V8 a deeper, more assertive voice while keeping cabin drone under control. It installs with a bolt-on design. For Mustang GT owners who want a stainless cat-back with a distinctive dark tip finish and a sound that ranges from a restrained idle to a strong note at wide-open throttle, the SwitchPath system covers sound, construction, and appearance in one package.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSwitchPath cat-back exhaust system from AWE Tuning, part number 3025-43650\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003e3-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eQuad exhaust tips, each 4 inches in diameter\u003c\/li\u003e\n\u003cli\u003eDiamond Black tip finish\u003c\/li\u003e\n\u003cli\u003eH-pipe included\u003c\/li\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003cli\u003eEngineered by the manufacturer to suppress cabin drone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eAWE builds the SwitchPath system from T304 stainless steel. The tubing is mandrel bent, which keeps the 3-inch pipe at a consistent diameter through each bend instead of letting it crimp or flatten. The manufacturer cites this method for both durability and flow.\u003c\/p\u003e\u003cp\u003eThe four tips measure 4 inches in diameter each and carry a Diamond Black finish. They give the rear of the car a darker, more aggressive look than polished or brushed tips.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAWE describes the sound as deep and rumbling at idle, with a subtle but noticeable presence when the car is cruising. It builds to a much more aggressive tone under load and reaches a full roar at wide-open throttle.\u003c\/p\u003e\u003cp\u003eDrone control is one of AWE's main design goals for this system. The manufacturer states it is engineered to keep cabin drone at bay, so the stronger exhaust note does not come with constant interior resonance at steady speeds.\u003c\/p\u003e\u003cp\u003eThe included H-pipe and the mandrel-bent 3-inch tubing are intended to improve exhaust flow compared with the factory setup. The manufacturer does not publish specific horsepower or torque figures.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on design, described by the manufacturer as straightforward to install\u003c\/li\u003e\n\u003cli\u003eIncludes an H-pipe, which is installed along with the cat-back section\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a stainless cat-back built from T304 steel with mandrel-bent 3-inch tubing\u003c\/li\u003e\n\u003cli\u003eYou want a noticeably deeper and more aggressive V8 sound without the cabin drone that some aftermarket systems produce\u003c\/li\u003e\n\u003cli\u003eYou want to change the rear appearance of the car with quad 4-inch Diamond Black tips\u003c\/li\u003e\n\u003cli\u003eYou prefer a bolt-on system that comes with its own H-pipe, so no separate crossover purchase is needed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAWE SwitchPath cat-back exhaust system with quad 4-inch Diamond Black tips\u003c\/li\u003e\n\u003cli\u003eH-pipe\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":68305314807993,"sku":"AWE3025-43650","price":3095.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/3020-42650_12.jpg?v=1794430564"},{"product_id":"borla-cat-back-exhaust-system-atak-black-chrome-dual-tips-2024-2026-mustang-w-non-active-exhaust-140961bc","title":"Borla Cat-Back Exhaust System - ATAK - Black Chrome Dual Tips (2024-2026 Mustang w\/ Non Active Exhaust) - 140961BC","description":"\u003cp\u003eThe Borla ATAK Cat-Back Exhaust System, part number 140961BC, is built for S650 Mustangs equipped with the non-active exhaust. It replaces the factory exhaust from the catalytic converters back with 2.75-inch mandrel-bent T304 stainless steel tubing and an integrated X-pipe, and it finishes at dual 4-inch black chrome tips.\u003c\/p\u003e\n\u003cp\u003eATAK is Borla's most aggressive sound level. This system delivers a deep, resonant idle and a note that builds sharply under throttle, and Borla says it is engineered to control cabin drone. It bolts on, so it suits owners who want a louder exhaust note, better flow, and a stainless system with a dark finish on a Mustang that did not come with the factory active valve setup.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK cat-back exhaust system, part number 140961BC\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustangs with the non-active (non-valved) factory exhaust\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing to maintain consistent pipe diameter through the bends\u003c\/li\u003e\n\u003cli\u003e2.75-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eX-pipe included in the system\u003c\/li\u003e\n\u003cli\u003eDual 4-inch exhaust tips\u003c\/li\u003e\n\u003cli\u003eBlack chrome tip finish\u003c\/li\u003e\n\u003cli\u003eAggressive ATAK sound profile with a deep tone at idle and a louder note at full throttle\u003c\/li\u003e\n\u003cli\u003eEngineered to minimize cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this system from T304 stainless steel, which gives it the durability expected of a long-term exhaust upgrade. The tubing is mandrel bent, so the 2.75-inch pipe keeps its full diameter through each bend instead of crimping. Crush-bent bends restrict flow at those points.\u003c\/p\u003e\u003cp\u003eThe system includes an X-pipe that merges the two exhaust banks to improve flow. At the rear, dual 4-inch tips with a black chrome finish give the system a dark, finished look.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eATAK is Borla's most aggressive sound profile. At idle, the system has a deep, resonant tone. The volume and intensity build as you open the throttle, and at wide-open throttle the exhaust note is at its most aggressive.\u003c\/p\u003e\u003cp\u003eBorla says the system is engineered to keep drone under control, so you get the aggressive exhaust note without excessive cabin noise during steady cruising.\u003c\/p\u003e\u003cp\u003eThe 2.75-inch mandrel-bent tubing and the X-pipe work together to improve flow compared with a restrictive layout.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eIntended for vehicles with the non-active (non-valved) factory exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want Borla's most aggressive sound level on a Mustang without the factory active exhaust\u003c\/li\u003e\n\u003cli\u003eYou prefer T304 stainless steel and mandrel-bent tubing for long-term durability and consistent flow\u003c\/li\u003e\n\u003cli\u003eYou want an integrated X-pipe as part of the system\u003c\/li\u003e\n\u003cli\u003eYou want a louder exhaust that Borla says is engineered to control cabin drone\u003c\/li\u003e\n\u003cli\u003eYou like the look of dual 4-inch black chrome tips\u003c\/li\u003e\n\u003cli\u003eYou want a bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eX-pipe\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305437950137,"sku":"BOR140961BC","price":1775.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140961BC-main-1-xlarge.jpg?v=1794430361"},{"product_id":"awe-touring-edition-catback-exhaust-dual-diamond-black-tips-2024-2026-mustang-gt-3015-33650","title":"AWE Touring Edition Catback Exhaust - Dual Diamond Black Tips (2024-2026 Mustang GT) - 3015-33650","description":"\u003cp\u003eThe AWE Tuning Touring Edition Cat-Back Exhaust, part number 3015-33650, is a complete cat-back system for the Mustang GT. It is built from T304 stainless steel with 3-inch mandrel-bent tubing, uses an X-pipe to manage exhaust flow, and finishes with dual 4-inch tips in a Diamond Black finish.\u003c\/p\u003e\n\u003cp\u003eThe Touring Edition is AWE's take on a cat-back that sounds aggressive without being tiresome. AWE describes a deep growl at idle that builds to a race-inspired scream at wide-open throttle, and says the system is engineered to suppress cabin drone. With a bolt-on design and stainless construction, it suits Mustang GT owners who want a stronger exhaust note and a durable replacement for the factory system, while still keeping the car comfortable on longer drives.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system, AWE Tuning part number 3015-33650\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e3-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eX-pipe included to optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eDual 4-inch exhaust tips\u003c\/li\u003e\n\u003cli\u003eDiamond Black tip finish\u003c\/li\u003e\n\u003cli\u003eTouring Edition tuning engineered to control cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eAWE builds the Touring Edition from T304 stainless steel, chosen for durability and long service life. The tubing is mandrel-bent, so the 3-inch pipe holds a consistent diameter through each bend instead of narrowing as a crush-bent pipe would.\u003c\/p\u003e\u003cp\u003eThe dual 4-inch tips carry a Diamond Black finish that AWE describes as durable, giving the rear of the car a dark, aggressive look that is meant to hold up over time.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAWE describes the sound as progressive. At idle it is a deep, resonant growl. Under acceleration it becomes a fuller roar, and near wide-open throttle it rises into a sharp, race-inspired scream.\u003c\/p\u003e\u003cp\u003eThe Touring Edition is tuned to keep cabin drone in check, so the exhaust note stays clean at cruise without the low-frequency hum that can wear on a driver.\u003c\/p\u003e\u003cp\u003eThe X-pipe and mandrel-bent 3-inch tubing are intended to optimize exhaust flow. AWE states the design improves horsepower and torque but does not publish specific figures.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBolt-on design, described by the manufacturer as straightforward to install\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory cat-back with a T304 stainless steel system built for longevity\u003c\/li\u003e\n\u003cli\u003eAdds a deeper idle tone and a sharper wide-open-throttle sound without heavy cabin drone\u003c\/li\u003e\n\u003cli\u003eUses an X-pipe and mandrel-bent 3-inch tubing for improved exhaust flow\u003c\/li\u003e\n\u003cli\u003eDual 4-inch Diamond Black tips change the look of the rear of the car\u003c\/li\u003e\n\u003cli\u003eBolt-on design suits owners who do their own installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eX-pipe\u003c\/li\u003e\u003c\/ul\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":68305554243769,"sku":"AWE3015-33650","price":1945.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/3020-33650_11.jpg?v=1794430570"},{"product_id":"awe-3015-32084-2015-2017-2026-mustang-gt-non-active-catback-exhaust-touring-chrome-tips","title":"AWE 3015-32084 2015-2017 \/ 2026 Mustang GT Non-Active Catback Exhaust Touring (Chrome Tips)","description":"\u003cp\u003eThe AWE Tuning 3015-32084 Touring Edition cat-back exhaust is a non-active system for the Mustang GT, finished with 4-inch chrome tips. It runs 3-inch mandrel-bent tubing made from T304 stainless steel and uses an X-pipe to improve how exhaust gases move from the catalytic converters back to the tips.\u003c\/p\u003e\n\u003cp\u003eAWE describes the Touring tone as a deep rumble at idle that builds into a strong roar under full throttle, while the system is engineered to keep cabin drone in check. It installs as a bolt-on upgrade, which makes it a practical choice for Mustang GT owners who want a more aggressive but controlled exhaust note and a cleaner rear appearance without fabrication work.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTouring Edition cat-back exhaust for non-active-exhaust Mustang GT applications\u003c\/li\u003e\n\u003cli\u003e3-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003e4-inch exhaust tips with chrome finish\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent fitment and finish\u003c\/li\u003e\n\u003cli\u003eIntegrated X-pipe intended to improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eDesigned to limit cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eAWE Tuning part number 3015-32084\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eAWE builds this cat-back from T304 stainless steel, a material selected for its durability in exhaust service. The tubing is mandrel-bent, which maintains the 3-inch diameter through each bend and helps the system line up properly and present a clean finish once installed.\u003c\/p\u003e\u003cp\u003eThe system finishes in 4-inch chrome tips that give the rear of the car a polished look whether it is parked or on the road.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Touring Edition is tuned for a sound that AWE calls both aggressive and refined. At idle it produces a deep rumble, and it opens up into a pronounced roar as engine speed and throttle increase.\u003c\/p\u003e\u003cp\u003eCabin drone is a common complaint with aftermarket exhausts, and AWE states this system is designed to keep it under control, so the stronger exhaust note does not come at the cost of comfort on longer drives.\u003c\/p\u003e\u003cp\u003eAn X-pipe is part of the system and is included to improve exhaust flow through the 3-inch tubing.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned as a bolt-on upgrade\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a deeper, stronger exhaust note than stock while keeping cabin drone under control on the highway\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and mandrel-bent tubing provide a durable system with consistent fitment\u003c\/li\u003e\n\u003cli\u003eThe included X-pipe and 3-inch tubing are intended to improve exhaust flow\u003c\/li\u003e\n\u003cli\u003e4-inch chrome tips upgrade the look of the rear of the car\u003c\/li\u003e\n\u003cli\u003eBolt-on design means no fabrication is required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":68305556537529,"sku":"AWE3015-32084","price":1845.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/3020-32028_2.jpg?v=1794430571"},{"product_id":"corsa-performance-3-0-sport-cat-back-exhaust-hh-pipe-with-4-0-black-pvd-slash-cut-tips-2024-2026-mustang-gt-coupe-w-active-exhaust-21261blk-14502","title":"Corsa Performance 3.0\" Sport+ Cat-Back Exhaust: HH-Pipe with 4.0\" Black PVD Slash Cut Tips - (2024-2026 Mustang GT Coupe w\/ Active Exhaust) - 21261BLK-14502","description":"\u003cp\u003eThe Corsa Performance 3.0 inch Sport cat-back exhaust is a complete replacement system for the Mustang GT coupe equipped with the factory active exhaust. It combines 3.0 inch mandrel-bent T304 stainless steel tubing with an H-pipe crossover and finishes at a set of 4.0 inch slash-cut tips coated in a Black PVD finish. Corsa engineered the components to work together as one system, with the goals of improving exhaust flow and delivering a more aggressive exhaust note than the factory setup.\u003c\/p\u003e\n\u003cp\u003eA key part of this system is Corsa's RSC (Reflective Sound Cancellation) technology, which is designed to control drone during steady cruising so the car stays comfortable on longer drives while keeping an aggressive character under acceleration. For owners of current-generation Mustang GT coupes with active exhaust who want a bolt-on stainless system with a pronounced sound and a darker tip finish, this Corsa Sport system is a sensible option.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003e4.0 inch slash-cut exhaust tips\u003c\/li\u003e\n\u003cli\u003eBlack PVD tip finish\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for durability and exhaust flow\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover included\u003c\/li\u003e\n\u003cli\u003eCorsa RSC (Reflective Sound Cancellation) technology for drone control\u003c\/li\u003e\n\u003cli\u003eSport sound level: deep growl at startup, throaty tone under throttle, high-pitched note at high rpm\u003c\/li\u003e\n\u003cli\u003eBolt-on cat-back design for Mustang GT coupe models with active exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds this cat-back from T304 stainless steel, and the tubing is mandrel bent. Mandrel bending keeps the tube diameter consistent through each bend, which supports smooth exhaust flow and contributes to the system's durability.\u003c\/p\u003e\u003cp\u003eThe components are precision-engineered to function as a matched system, from the H-pipe crossover back to the tips. The 4.0 inch slash-cut tips carry a Black PVD finish, giving the rear of the car a modern, darker look, and Corsa specifies that the tips are built to withstand the demands of high-performance driving.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAs a Sport-level system, this exhaust is tuned for an assertive sound. At startup it produces a deep, aggressive growl. Under throttle the tone becomes fuller and throatier, and at higher rpm it develops into a high-pitched, performance-oriented note.\u003c\/p\u003e\u003cp\u003eCorsa's RSC (Reflective Sound Cancellation) technology targets the drone that commonly comes with aggressive aftermarket exhausts, helping keep cabin noise manageable at cruising speeds without giving up the system's aggressive character. The 3.0 inch mandrel-bent tubing and H-pipe layout are intended to improve exhaust flow compared with the factory system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on cat-back design\u003c\/li\u003e\n\u003cli\u003eCorsa describes the installation process as straightforward\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for Mustang GT coupe models equipped with the factory active exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a more aggressive exhaust note from your Mustang GT without the constant drone at highway speeds, which RSC technology is designed to control.\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and mandrel-bent tubing provide a durable system with consistent tube diameter through the bends.\u003c\/li\u003e\n\u003cli\u003eThe H-pipe crossover is included, so the system is a complete cat-back solution.\u003c\/li\u003e\n\u003cli\u003eThe 4.0 inch Black PVD slash-cut tips give the rear of the car a darker, modern appearance.\u003c\/li\u003e\n\u003cli\u003eThe bolt-on design suits owners who do their own work and want a direct replacement for the factory cat-back on an active exhaust car.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT, Fastback\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305556668601,"sku":"COR21261BLK-14502","price":2804.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21261_a_lowres_e06fc378-ad3e-43ba-a2fc-15fb133895aa.jpg?v=1794434177"},{"product_id":"corsa-performance-3-0-extreme-cat-back-exhaust-hh-pipe-with-4-5-polished-pro-series-dual-tips-2024-2026-mustang-gt-coupe-w-non-active-exhaust-21252-14502","title":"Corsa Performance 3.0\" Extreme Cat-Back Exhaust: HH-Pipe with 4.5\" Polished Pro Series Dual Tips - (2024-2026 Mustang GT Coupe w\/ Non-Active Exhaust) 21252-14502","description":"\u003cp\u003eThe Corsa Performance 3.0 inch Extreme Cat-Back Exhaust (part number 21252-14502) is a complete cat-back system for the S650-generation Mustang GT coupe equipped with the non-active exhaust. It is built from T304 stainless steel with mandrel-bent 3.0 inch tubing, includes an H-pipe crossover, and finishes in a pair of 4.5 inch polished Pro-Series tips at each side of the rear fascia.\u003c\/p\u003e\n\u003cp\u003eThis is the most aggressive tone in the Corsa lineup offered here. Corsa describes a deep growl at idle that builds to a full roar under throttle, and states the system is tuned to keep drone out of the cabin at highway cruise. For owners of a non-active-exhaust GT who want a louder, more assertive V8 sound without constant cabin resonance, it offers a bolt-on upgrade that also improves the look of the rear of the car.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system with Extreme sound level\u003c\/li\u003e\n\u003cli\u003e3.0 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover included\u003c\/li\u003e\n\u003cli\u003e4.5 inch Pro-Series dual tips in a polished finish\u003c\/li\u003e\n\u003cli\u003eTuned by Corsa to minimize cabin drone during cruising\u003c\/li\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT coupe models with the non-active exhaust\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 21252-14502\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eCorsa fabricates this system from T304 stainless steel, a material chosen for its durability and long service life in an exhaust application. The polished finish carries through to the tips for a consistent appearance.\u003c\/p\u003e\u003cp\u003eThe 3.0 inch tubing is mandrel bent, which keeps the pipe diameter consistent through each bend. This preserves a smooth path for exhaust gases from the H-pipe back to the tips, supporting the flow characteristics Corsa designed into the system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound is the defining trait of the Extreme version. At idle the system produces a deep, steady growl, and as the throttle opens it builds into a full, aggressive roar. It is aimed at drivers who want their GT to be clearly heard.\u003c\/p\u003e\u003cp\u003eCorsa has tuned the system to keep drone out of the cabin, so the aggressive character under acceleration does not translate into constant resonance at steady highway speeds.\u003c\/p\u003e\u003cp\u003eThe included H-pipe connects the two banks to improve exhaust flow, and the 4.5 inch polished Pro-Series dual tips give the rear of the car a cleaner, more finished look while forming the final stage of the system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003cli\u003eSpecific to Mustang GT coupe models with the non-active exhaust; confirm your car does not have the active valve exhaust before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the most aggressive sound Corsa offers for a non-active-exhaust Mustang GT\u003c\/li\u003e\n\u003cli\u003eYou want a loud exhaust that is tuned by the manufacturer to avoid highway drone\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and mandrel-bent 3.0 inch tubing provide durable construction and smooth flow\u003c\/li\u003e\n\u003cli\u003eThe included H-pipe and bolt-on design make it a complete cat-back package\u003c\/li\u003e\n\u003cli\u003e4.5 inch polished Pro-Series dual tips upgrade the appearance of the rear fascia\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT, Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eH-pipe\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305561813177,"sku":"COR21252-14502","price":2064.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21252_a_lowres_9a25832a-3ea6-47ca-81f2-733c2d629d3f.jpg?v=1794434178"},{"product_id":"borla-cat-back-exhaust-system-atak-black-chrome-quad-tips-2024-2026-mustang-w-active-exhaust-140963bc","title":"Borla Cat-Back Exhaust System - ATAK - Black Chrome Quad Tips (2024-2026 Mustang w\/ Active Exhaust) - 140963BC","description":"\u003cp\u003eThe Borla ATAK Cat-Back Exhaust System, part number 140963BC, is a complete cat-back system for the 2024 Mustang equipped with the factory active exhaust. It is built from T304 stainless steel with mandrel-bent 2.75-inch tubing, uses an X-pipe to improve exhaust flow, and finishes with four 4-inch black chrome tips.\u003c\/p\u003e\n\u003cp\u003eATAK is Borla's aggressive sound profile. This system gives a deep, resonant tone at idle that builds as rpm climbs and peaks at wide-open throttle, while Borla engineered it to keep cabin drone under control for comfortable driving. Its bolt-on design and stainless construction make it a practical choice for owners who want a louder, more aggressive exhaust note and a cleaner rear-end appearance on an active-exhaust car.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK cat-back exhaust system, part number 140963BC\u003c\/li\u003e\n\u003cli\u003eDesigned for 2024 Mustang models with active exhaust\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003e2.75-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eX-pipe included\u003c\/li\u003e\n\u003cli\u003eQuad exhaust tips, 4-inch diameter each\u003c\/li\u003e\n\u003cli\u003eBlack chrome tip finish\u003c\/li\u003e\n\u003cli\u003eATAK aggressive sound profile\u003c\/li\u003e\n\u003cli\u003eEngineered to minimize cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this system from T304 stainless steel, a material chosen for its durability in an exhaust environment. The tubing is mandrel-bent, which keeps the pipe diameter consistent through each bend rather than crimping or flattening it, supporting both exhaust flow and the long-term durability of the system.\u003c\/p\u003e\u003cp\u003eThe 2.75-inch tubing runs to an X-pipe that merges the two exhaust banks to improve flow, and the system ends in four 4-inch tips with a black chrome finish.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe ATAK profile is Borla's most aggressive sound level. At idle the system produces a deep, resonant tone, and the volume and intensity rise as you open the throttle, reaching their peak at wide-open throttle.\u003c\/p\u003e\u003cp\u003eDespite that aggressive character, Borla designed the system to keep cabin drone in check, so the car stays comfortable on longer drives. The mandrel-bent tubing and included X-pipe are intended to optimize exhaust flow through the cat-back section.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation per the manufacturer\u003c\/li\u003e\n\u003cli\u003eDesigned to work with Mustang models equipped with the factory active exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want an aggressive exhaust tone that stays deep at idle and builds to a strong note at wide-open throttle\u003c\/li\u003e\n\u003cli\u003eYou want that sound with drone control engineered in for daily driving\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and mandrel-bent tubing provide durable construction\u003c\/li\u003e\n\u003cli\u003eThe included X-pipe improves exhaust flow through the cat-back section\u003c\/li\u003e\n\u003cli\u003eBlack chrome quad 4-inch tips update the rear appearance of the car\u003c\/li\u003e\n\u003cli\u003eThe bolt-on design suits owners who do their own installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eX-pipe\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305573347513,"sku":"BOR140963BC","price":2579.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140963BC-main-1-xlarge.jpg?v=1794430376"},{"product_id":"corsa-performance-3-0-dual-rear-exit-xtreme-cat-back-exhaust-system-with-4-5-black-pvd-straight-cut-tips-2024-2026-mustang-gt-coupe-w-non-active-exhaust-21251blk","title":"Corsa Performance 3.0” Dual Rear Exit Xtreme Cat-Back Exhaust System with 4.5” Black PVD Straight Cut Tips (2024-2026 Mustang GT Coupe w\/ Non-Active Exhaust) - 21251BLK","description":"\u003cp\u003eThe Corsa Performance 21251BLK is a 3.0-inch dual rear exit cat-back exhaust system from the company's Xtreme line, finished with 4.5-inch Black PVD straight-cut tips. It is engineered for the Mustang GT coupe equipped with the non-active (non-valved) exhaust, replacing the factory system from the catalytic converters rearward. Corsa builds the system from T304 stainless steel with mandrel-bent tubing and includes an X-pipe in the layout.\u003c\/p\u003e\n\u003cp\u003eFor owners who want a noticeably more aggressive exhaust note without the cabin drone that often comes with louder systems, the Xtreme configuration is Corsa's answer. Corsa describes a deep idle tone that builds into a more aggressive sound under acceleration and at wide-open throttle, while the system is designed to keep drone out of the cabin. As a bolt-on system with black PVD tips that resist corrosion and discoloration, it suits enthusiasts who want both a sound upgrade and a cleaner rear-end appearance on their non-active exhaust GT.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorsa Performance Xtreme series cat-back exhaust, part number 21251BLK\u003c\/li\u003e\n\u003cli\u003e3.0-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003e4.5-inch straight-cut tips with Black PVD finish\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eX-pipe included\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT coupe models with non-active exhaust\u003c\/li\u003e\n\u003cli\u003eEngineered to minimize cabin drone\u003c\/li\u003e\n\u003cli\u003eTips resist corrosion and discoloration\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eCorsa fabricates the 21251BLK from T304 stainless steel, a material chosen for its durability in an exhaust environment. The tubing is mandrel-bent, which keeps the pipe diameter consistent through each bend and supports smooth exhaust flow along the full length of the 3.0-inch system.\u003c\/p\u003e\u003cp\u003eThe 4.5-inch straight-cut tips carry a Black PVD finish. According to Corsa, this finish resists corrosion and discoloration, helping the tips hold their appearance over time rather than fading or staining from exhaust heat.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCorsa characterizes the Xtreme sound as a deep, throaty tone at idle that becomes richer and more aggressive as you open the throttle, with a commanding note at full throttle. This places the system on the louder, more aggressive end of Corsa's lineup.\u003c\/p\u003e\u003cp\u003eA central design goal of the system is drone control. Corsa states that the Xtreme cat-back is built to keep unwanted cabin hum out, so the exhaust note can be enjoyed at cruise without the constant resonance that louder aftermarket systems can produce.\u003c\/p\u003e\u003cp\u003eThe included X-pipe is intended to improve exhaust flow, and Corsa states that the system's construction is aimed at improving horsepower and torque, though no specific figures are provided.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorsa describes this system as a straightforward bolt-on installation.\u003c\/li\u003e\n\u003cli\u003eIntended for vehicles with the non-active exhaust; confirm your car is not equipped with the active valve exhaust before installing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelivers a deeper, more aggressive exhaust note than the factory non-active system, according to Corsa's sound description.\u003c\/li\u003e\n\u003cli\u003eDesigned to limit cabin drone, making it more livable on highway drives than many loud aftermarket systems.\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and mandrel-bent tubing provide a durable, smooth-flowing build.\u003c\/li\u003e\n\u003cli\u003eIncludes an X-pipe as part of the system layout.\u003c\/li\u003e\n\u003cli\u003eBlack PVD straight-cut tips resist corrosion and discoloration while giving the rear of the car a darker, more aggressive look.\u003c\/li\u003e\n\u003cli\u003eBolt-on design allows installation without a complicated process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT, Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eX-pipe\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305680892089,"sku":"COR21251BLK","price":1627.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21251_a_lowres_19faab8c-6238-450d-9f5d-87430e35dc28.jpg?v=1794430791"},{"product_id":"mbrp-3-cat-back-exhaust-quad-rear-exit-w-carbon-fiber-tips-t304-active-exhaust-f-2024-2026-mustang-gt-gt-premium-s72553cf","title":"MBRP 3\" Cat-Back Exhaust – Quad Rear Exit w\/ Carbon Fiber Tips (T304, Active Exhaust) f(2024-2026 Mustang GT \/ GT Premium) – S72553CF","description":"\u003cp\u003eThe MBRP S72553CF is a 3-inch cat-back exhaust system for the Ford Mustang GT equipped with the factory active exhaust. It is built from T304 stainless steel and finishes in a quad rear exit with four 4-inch carbon fiber-wrapped tips. The system replaces the crimped factory piping with mandrel-bent tubing and keeps the OEM exhaust valves. That means the car's selectable sound modes keep working after the upgrade.\u003c\/p\u003e\n\u003cp\u003eMBRP intends this cat-back for owners who want more volume and better exhaust flow but still want a quiet setting when they need it. It installs as a direct bolt-on and reuses the factory valve actuators. No tuning or reprogramming is required, and no additional components are needed. It suits drivers who want a noticeable upgrade without going to a race-oriented or muffler-delete setup and without giving up factory valve control.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: S72553CF\u003c\/li\u003e\n\u003cli\u003e3-inch mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel tubing construction\u003c\/li\u003e\n\u003cli\u003eQuad rear exit with four 4-inch tips\u003c\/li\u003e\n\u003cli\u003eTips are stainless steel with a heat-resistant carbon fiber wrap and a polished stainless core\u003c\/li\u003e\n\u003cli\u003eRetains full factory active exhaust valve control with plug-and-play integration\u003c\/li\u003e\n\u003cli\u003eUses the factory exhaust valves for selectable sound modes\u003c\/li\u003e\n\u003cli\u003eReuses the factory valve actuators; no additional components required\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment\u003c\/li\u003e\n\u003cli\u003eNo tuning or reprogramming required\u003c\/li\u003e\n\u003cli\u003eDescribed by the manufacturer as lighter than stock due to a freer-flowing, simplified layout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction with Carbon Fiber-Wrapped Tips\u003c\/h3\u003e\u003cp\u003eMBRP builds the S72553CF tubing from T304 stainless steel. The manufacturer cites the material's rust resistance and high-temperature durability, which suit cars used for daily driving or track work. The 3-inch tubing is mandrel-bent rather than crimped, so it holds a consistent diameter through each bend.\u003c\/p\u003e\u003cp\u003eThe system exits through four 4-inch tips. Each tip has a polished stainless steel core wrapped in heat-resistant carbon fiber, giving the rear of the car a motorsport-inspired look.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCompared with the crimped factory piping, the 3-inch mandrel-bent layout is designed to improve airflow, throttle response, and top-end tone. MBRP states the system delivers a fuller tone without drone.\u003c\/p\u003e\u003cp\u003eThe system works with the factory exhaust valves, so the selectable sound modes are preserved. You keep a quieter mode for situations where volume isn't wanted, with more sound and flow available on demand.\u003c\/p\u003e\u003cp\u003eMBRP also states the system is lighter than the stock exhaust because of its freer-flowing, simplified layout. No specific weight figure is provided.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on installation that uses the OEM valve actuators\u003c\/li\u003e\n\u003cli\u003eNo tuning or reprogramming required\u003c\/li\u003e\n\u003cli\u003eThe factory valve actuators must be transferred to the new system\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to ensure proper tip alignment and valve integration\u003c\/li\u003e\n\u003cli\u003eDesigned only for Mustangs equipped with the factory active exhaust; installation on non-active cars should not be attempted unless the full wiring and valve components are swapped over\u003c\/li\u003e\n\u003cli\u003eThe manufacturer advises using the complete system as intended, since mixing parts may cause fitment or performance issues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces crimped factory piping with 3-inch mandrel-bent tubing for improved airflow and throttle response\u003c\/li\u003e\n\u003cli\u003eKeeps factory active exhaust valve control, so you can still run a quieter mode when needed\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel tubing offers rust resistance for daily-driven or track-used cars\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch carbon fiber-wrapped tips update the rear appearance\u003c\/li\u003e\n\u003cli\u003eBolts on directly, reuses the factory valve actuators, and requires no tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT \/ Dark Horse \/ EcoBoost\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with EcoBoost or Dark Horse trims\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305693245625,"sku":"MBRPS72553CF","price":1984.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_5ef92777-cef6-4d45-8275-1889d16deba7.webp?v=1794435546"},{"product_id":"borla-cat-back-exhaust-system-atak-carbon-fiber-quad-tips-2024-2026-mustang-dark-horse-140965cfba","title":"Borla Cat-Back Exhaust System - ATAK - Carbon Fiber Quad Tips (2024-2026 Mustang Dark Horse) - 140965CFBA","description":"\u003cp\u003eThe Borla ATAK Cat-Back Exhaust System, part number 140965CFBA, is a complete bolt-on rear exhaust for the S650 Mustang Dark Horse. It is built from T304 stainless steel with 3-inch mandrel-bent tubing and an included X-pipe, and it exits through four 5-inch carbon fiber tips. ATAK is Borla's most aggressive sound profile, and this system is tuned to give the Dark Horse a pronounced exhaust note.\u003c\/p\u003e\n\u003cp\u003eThe system is aimed at Dark Horse owners who want a stronger exhaust presence without cabin drone at steady cruising speeds. Borla engineered the system to control drone while keeping the aggressive character. With stainless construction, an X-pipe crossover, and carbon fiber quad tips, it upgrades both the sound and the look of the rear of the car.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK cat-back exhaust system, part number 140965CFBA\u003c\/li\u003e\n\u003cli\u003e3-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eX-pipe included in the system\u003c\/li\u003e\n\u003cli\u003eFour 5-inch carbon fiber exhaust tips\u003c\/li\u003e\n\u003cli\u003eAggressive ATAK sound profile with a deep growl that builds to a loud roar at wide-open throttle\u003c\/li\u003e\n\u003cli\u003eEngineered by Borla to minimize cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this cat-back from T304 stainless steel, an alloy chosen for durability in an exhaust application. The tubing is mandrel-bent, so the pipe keeps a consistent diameter through each bend instead of crimping or flattening. This supports smooth exhaust flow and helps the system stay strong over time.\u003c\/p\u003e\u003cp\u003eThe system finishes in four carbon fiber tips, each measuring 5 inches in diameter. The carbon fiber finish gives the rear fascia a modern look that suits the Dark Horse's styling.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe ATAK profile has a deep, aggressive growl at startup. The volume and intensity rise as you open the throttle, reaching a loud roar at wide-open throttle. It is meant for owners who want an assertive exhaust note.\u003c\/p\u003e\u003cp\u003eBorla engineered this system to avoid intrusive cabin drone despite its aggressive tone, so it stays comfortable to drive day to day. The 3-inch mandrel-bent tubing and included X-pipe are designed to improve exhaust flow through the cat-back section.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBolt-on design\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the most aggressive Borla sound profile for your Dark Horse, with a growl at idle and a loud roar at wide-open throttle.\u003c\/li\u003e\n\u003cli\u003eYou want an aggressive exhaust note while keeping cabin drone under control on the highway.\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and mandrel-bent tubing provide durable construction and smooth flow.\u003c\/li\u003e\n\u003cli\u003eThe included X-pipe and 3-inch tubing are part of a complete, flow-focused cat-back design.\u003c\/li\u003e\n\u003cli\u003eFour 5-inch carbon fiber tips give the rear of the car a distinctive, modern finish.\u003c\/li\u003e\n\u003cli\u003eThe bolt-on design suits enthusiasts who handle their own installs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang Dark Horse\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eFour 5-inch carbon fiber exhaust tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305695703225,"sku":"BOR140965CFBA","price":3264.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140965CFBA-main-1-xlarge.jpg?v=1794430391"},{"product_id":"corsa-performance-3-0-dual-rear-exit-xtreme-cat-back-exhaust-system-black-pvd-4-0-straight-cut-tips-2024-2026-mustang-gt-coupe-w-active-exhaust-21260blk","title":"Corsa Performance 3.0\" Dual Rear Exit Xtreme Cat-Back Exhaust System - Black PVD 4.0\" Straight Cut Tips (2024-2026 Mustang GT Coupe w\/ Active Exhaust) - 21260BLK","description":"\u003cp\u003eThe Corsa Performance Xtreme Cat-Back Exhaust System, part number 21260BLK, is a 3.0 inch dual rear exit system for the S650 Mustang GT coupe with factory Active Exhaust. It replaces the exhaust from the catalytic converters back with mandrel-bent T304 stainless steel tubing and an X-pipe, and it finishes at a pair of 4.0 inch straight-cut tips in a Black PVD finish.\u003c\/p\u003e\n\u003cp\u003eXtreme is the most aggressive sound level in the Corsa lineup for this car. It starts with a deep, throaty idle, builds through the rev range, and reaches a high-pitched scream at wide-open throttle. Corsa states the system is designed to avoid cabin drone, so you get the louder tone without a constant hum at cruising speed. The system bolts on, which suits enthusiasts who want a clear change in sound and appearance using durable stainless components.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorsa Performance Xtreme sound level\u003c\/li\u003e\n\u003cli\u003e3.0 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eDual rear exit configuration\u003c\/li\u003e\n\u003cli\u003e4.0 inch straight-cut exhaust tips\u003c\/li\u003e\n\u003cli\u003eBlack PVD tip finish\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for exhaust flow\u003c\/li\u003e\n\u003cli\u003eX-pipe included\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT coupe models equipped with Active Exhaust\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 21260BLK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds this cat-back from T304 stainless steel, a material chosen for its strength and corrosion resistance on a component that sees constant heat cycling, road spray, and weather. The tubing is mandrel bent, so the pipe keeps a consistent 3.0 inch diameter through each bend instead of narrowing where it turns.\u003c\/p\u003e\u003cp\u003eThe 4.0 inch straight-cut tips have a Black PVD finish. Corsa states the finish is intended to hold up to the elements over time. It also gives the rear of the car a darker, cleaner look than polished tips.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Xtreme sound profile has a distinct character at each stage of throttle. At idle it settles into a deep, throaty growl. Under acceleration it builds into a harder roar, and at wide-open throttle it rises to a high-pitched scream.\u003c\/p\u003e\u003cp\u003eCorsa states the design avoids cabin drone, so the aggressive exterior tone does not have to come with a persistent in-cabin hum on the highway.\u003c\/p\u003e\u003cp\u003eThe included X-pipe and mandrel-bent 3.0 inch tubing are intended to improve exhaust flow compared to restrictive routing. Corsa does not publish specific horsepower or torque figures for this system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation design\u003c\/li\u003e\n\u003cli\u003eIntended for vehicles equipped with the factory Active Exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the most aggressive sound level Corsa offers for the Mustang GT, from a deep idle to a high-pitched scream at wide-open throttle.\u003c\/li\u003e\n\u003cli\u003eYou want a louder exhaust that is designed to avoid cabin drone on long drives.\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel tubing and Black PVD tips are built to resist corrosion in daily use.\u003c\/li\u003e\n\u003cli\u003eThe included X-pipe and mandrel-bent 3.0 inch tubing are designed to improve exhaust flow.\u003c\/li\u003e\n\u003cli\u003eThe Black PVD straight-cut tips give the rear of the car a darker, more modern look.\u003c\/li\u003e\n\u003cli\u003eThe bolt-on design lets you install it in your own garage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT, Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eX-pipe\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305705828537,"sku":"COR21260BLK","price":2226.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21260_a_lowres_66b104e8-16eb-4cab-993a-682fd102844a.jpg?v=1794430797"},{"product_id":"borla-cat-back-exhaust-system-s-type-black-chrome-dual-tips-2024-2026-mustang-w-non-active-exhaust-140960bc","title":"Borla Cat-Back Exhaust System - S-Type - Black Chrome Dual Tips (2024-2026 Mustang w\/ Non Active Exhaust) - 140960BC","description":"\u003cp\u003eThe Borla S-Type Cat-Back Exhaust System, part number 140960BC, is a complete replacement for the factory exhaust from the catalytic converters rearward on the latest-generation Mustang equipped with the non-active (non-valved) factory exhaust. Borla builds it from T304 stainless steel with mandrel-bent 2.5-inch tubing and an X-pipe, and it finishes at dual 4-inch tips in a black chrome finish.\u003c\/p\u003e\n\u003cp\u003eThis system is aimed at owners who want a deeper, more aggressive exhaust note and improved exhaust flow without the cabin drone that can make a louder system tiresome on the highway. As a bolt-on design, it suits enthusiasts who prefer to do their own work. The pairing of stainless construction, an X-pipe, and black chrome tips makes it a sound and appearance upgrade intended for daily use.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system in Borla's S-Type configuration\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustangs with the non-active factory exhaust\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent flow through the bends\u003c\/li\u003e\n\u003cli\u003e2.5-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eX-pipe included to balance and optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eDual 4-inch exhaust tips\u003c\/li\u003e\n\u003cli\u003eBlack chrome tip finish\u003c\/li\u003e\n\u003cli\u003eDeep, aggressive tone at idle and wide-open throttle, engineered to avoid cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla constructs the S-Type system from T304 stainless steel, an alloy chosen for long service life in an exhaust environment. The tubing is mandrel-bent, which keeps the pipe's internal diameter consistent through each bend rather than allowing it to pinch or flatten, preserving the flow characteristics of the 2.5-inch tubing along the full length of the system.\u003c\/p\u003e\u003cp\u003eThe dual 4-inch tips carry a black chrome finish that gives the rear of the car a darker, modern look compared with polished tips. Borla describes the tips as durable and able to hold their appearance in demanding conditions.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe S-Type tuning delivers a deep, aggressive character. At idle the system produces a firm, authoritative tone, and under acceleration it builds to a much louder, more pronounced note at wide-open throttle.\u003c\/p\u003e\u003cp\u003eBorla engineered the system to deliver that aggressive sound without the cabin drone that often accompanies louder exhausts, so conversation and the audio system remain usable at cruising speeds.\u003c\/p\u003e\u003cp\u003eThe included X-pipe and mandrel-bent tubing are intended to improve exhaust flow over the factory system, which the manufacturer associates with gains in horsepower and torque. No specific figures are stated.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation; no specialized mechanical expertise is described as required\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for vehicles with the non-active factory exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a deeper, more aggressive exhaust note than the factory non-active system provides\u003c\/li\u003e\n\u003cli\u003eYou drive the car regularly and want louder sound without cabin drone on the highway\u003c\/li\u003e\n\u003cli\u003eYou value T304 stainless steel construction for long-term durability\u003c\/li\u003e\n\u003cli\u003eYou want improved exhaust flow from mandrel-bent tubing and an included X-pipe\u003c\/li\u003e\n\u003cli\u003eYou prefer the look of black chrome tips at the rear of the car\u003c\/li\u003e\n\u003cli\u003eYou plan to install the system yourself and want a bolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eDual 4-inch black chrome exhaust tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305817075897,"sku":"BOR140960BC","price":1949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140960BC-main-1-xlarge.jpg?v=1794430399"},{"product_id":"mbrp-3-t304-cat-back-dual-split-rear-exit-race-version-carbon-fiber-tips-2015-2026-mustang-ecoboost-2-3l-s72753cf","title":"MBRP 3\" T304 Cat Back; Dual Split Rear Exit (Race Version) - Carbon Fiber Tips (2015-2026 Mustang EcoBoost 2.3L) - S72753CF","description":"\u003cp\u003eThe MBRP S72753CF is a cat-back exhaust system from the company's Armor Pro series, built for the 2.3L EcoBoost Ford Mustang. It uses 3-inch tubing made from T304 stainless steel and routes exhaust to a dual split rear exit. The system finishes in dual-wall, angle-cut tips with a 4.5-inch outlet, combining a carbon fiber outer wall with a mirror-polished T304 stainless steel inner sleeve.\u003c\/p\u003e\n\u003cp\u003eThis is the Race Version of the system, tuned to MBRP's Race Profile, the most aggressive sound level the company offers. It suits EcoBoost Mustang owners who want a loud, track-inspired exhaust note, a split rear exit layout, and a material choice MBRP positions as its most durable, backed by a lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMBRP Armor Pro series cat-back exhaust, part number S72753CF\u003c\/li\u003e\n\u003cli\u003e3-inch tubing diameter\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction, MBRP's most durable material offering\u003c\/li\u003e\n\u003cli\u003eRace Profile sound, MBRP's most aggressive exhaust tone\u003c\/li\u003e\n\u003cli\u003eDual split rear exit configuration\u003c\/li\u003e\n\u003cli\u003eDual-wall, angle-cut tips with a 4.5-inch outlet\u003c\/li\u003e\n\u003cli\u003eTip outer wall made of carbon fiber with a mirror-polished T304 stainless steel inner sleeve\u003c\/li\u003e\n\u003cli\u003eDesigned for 2.3L EcoBoost-equipped Mustangs\u003c\/li\u003e\n\u003cli\u003eLifetime warranty from MBRP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds this system from T304 stainless steel, which the company describes as its most durable and industry-leading material option. According to MBRP, T304 is resistant to rust, making it a sensible choice for vehicles that see snow, road salt, or other harsh climate conditions, as well as off-road use.\u003c\/p\u003e\u003cp\u003eThe tips use a two-material, dual-wall design. The outer wall is carbon fiber, while the inner sleeve is mirror-polished T304 stainless steel. MBRP intends this pairing to deliver a race-inspired appearance that holds up over time, and the angle-cut 4.5-inch outlets give the rear of the car a finished look.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThis is the Race Profile version of the system, which MBRP rates as its most aggressive sound level. The company describes it as producing the most pronounced change in exhaust tone of its sound profiles, giving the EcoBoost a sharp, track-oriented note under throttle.\u003c\/p\u003e\u003cp\u003eThe 3-inch tubing and dual split rear exit layout define the system's flow path and rear-end appearance, with exhaust exiting on both sides of the rear of the vehicle.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the loudest, most aggressive sound level MBRP offers for a 2.3L EcoBoost Mustang\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel is well suited to cars driven through winter weather and road salt\u003c\/li\u003e\n\u003cli\u003eThe carbon fiber and polished stainless tips add a race-inspired finish to the rear of the car\u003c\/li\u003e\n\u003cli\u003eThe dual split rear exit gives a symmetrical, performance-oriented look\u003c\/li\u003e\n\u003cli\u003eMBRP backs the system with a lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLifetime warranty from MBRP.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305818976441,"sku":"MBRPS72753CF","price":1149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_8ae119f2-1516-4a3f-92f3-6c59d62a70c6.webp?v=1794435553"},{"product_id":"borla-cat-back-exhaust-system-s-type-black-chrome-quad-tips-2024-2026-mustang-dark-horse-140964bc","title":"Borla Cat-Back Exhaust System - S-Type - Black Chrome Quad Tips (2024-2026 Mustang Dark Horse) - 140964BC","description":"\u003cp\u003eThe Borla S-Type Cat-Back Exhaust System, part number 140964BC, is built for the Mustang Dark Horse and finished with black chrome quad tips. It replaces the factory exhaust from the catalytic converters back with T304 stainless steel, mandrel-bent 2.75-inch tubing and an included X-pipe. Borla designed it as a bolt-on system for owners who want a stronger exhaust note without major modification.\u003c\/p\u003e\n\u003cp\u003eThe S-Type tuning gives a deep, aggressive tone at startup that builds to a full roar at wide-open throttle. Borla says the system is engineered to limit cabin drone, so it stays comfortable on longer drives. For Dark Horse owners who want a stainless cat-back with an X-pipe and a matching black chrome tip finish, this system covers sound, flow and appearance in one package.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla S-Type cat-back exhaust system, part number 140964BC\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003e2.75-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eIncluded X-pipe for optimized exhaust flow\u003c\/li\u003e\n\u003cli\u003eQuad exhaust tips, 4 inches in diameter\u003c\/li\u003e\n\u003cli\u003eBlack chrome tip finish\u003c\/li\u003e\n\u003cli\u003eDeep, aggressive tone at startup that builds to a roar at wide-open throttle\u003c\/li\u003e\n\u003cli\u003eEngineered to minimize cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds the S-Type system from T304 stainless steel, an alloy chosen for durability in exhaust applications. The tubing is mandrel-bent, which keeps the pipe diameter consistent through each bend. That supports smooth exhaust flow and adds to the system's long-term durability.\u003c\/p\u003e\u003cp\u003eThe main tubing measures 2.75 inches in diameter and runs through an included X-pipe. The system ends in four 4-inch tips with a black chrome finish, which suits the Dark Horse's aggressive styling.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe S-Type is tuned for a deep, aggressive growl at startup. As throttle input increases, the sound grows and becomes a full roar at wide-open throttle.\u003c\/p\u003e\u003cp\u003eBorla engineered the system to keep cabin drone in check. The goal is a comfortable drive at cruising speeds while keeping the aggressive character under acceleration.\u003c\/p\u003e\u003cp\u003eThe included X-pipe is intended to optimize exhaust flow, and Borla says this contributes to both performance and sound. The manufacturer also states the system provides horsepower and torque gains, but it does not publish specific figures.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDesigned for bolt-on installation\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory cat-back with T304 stainless steel and mandrel-bent 2.75-inch tubing\u003c\/li\u003e\n\u003cli\u003eIncludes an X-pipe, so no separate crossover purchase is needed\u003c\/li\u003e\n\u003cli\u003eDelivers a deep, aggressive tone that builds under throttle, with drone kept under control for daily driving\u003c\/li\u003e\n\u003cli\u003eBlack chrome 4-inch quad tips match the Dark Horse's styling\u003c\/li\u003e\n\u003cli\u003eBolt-on design suits owners who do their own work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang Dark Horse\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eX-pipe\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305819107513,"sku":"BOR140964BC","price":2729.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140964BC-main-1-xlarge.jpg?v=1794430400"},{"product_id":"borla-cat-back-exhaust-system-s-type-black-chrome-quad-tips-2024-2026-mustang-w-active-exhaust-140962bc","title":"Borla Cat-Back Exhaust System - S-Type - Black Chrome Quad Tips (2024-2026 Mustang w\/ Active Exhaust) - 140962BC","description":"\u003cp\u003eThe Borla S-Type Cat-Back Exhaust System, part number 140962BC, is a T304 stainless steel cat-back for the current-generation Mustang equipped with the factory active exhaust. It pairs 2.75-inch mandrel-bent tubing with an X-pipe and finishes with four 4-inch black chrome tips. The goal is a more aggressive exhaust note across the rev range while keeping cabin drone under control.\u003c\/p\u003e\n\u003cp\u003eFor owners of active-exhaust Mustangs, this system offers a stronger, deeper voice than the factory setup without giving up highway comfort. It installs as a bolt-on and uses stainless construction and corrosion-resistant tips built for long service life. That combination makes it a practical choice for enthusiasts who want a noticeable sound upgrade from an established exhaust manufacturer that they can install themselves.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eS-Type cat-back exhaust system from Borla, part number 140962BC\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang models equipped with active exhaust\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003e2.75-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eX-pipe included to optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eQuad exhaust tips, 4 inches in diameter\u003c\/li\u003e\n\u003cli\u003eBlack chrome tip finish with corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDeep, resonant tone at idle that builds to an aggressive roar at wide-open throttle\u003c\/li\u003e\n\u003cli\u003eDesigned to minimize cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds the S-Type system from T304 stainless steel, a material chosen for durability in an exhaust environment. The tubing is mandrel-bent, which preserves a consistent pipe diameter through each bend. That consistency supports smooth exhaust flow through the 2.75-inch piping.\u003c\/p\u003e\u003cp\u003eThe four 4-inch tips carry a black chrome finish that Borla describes as corrosion-resistant. They are meant to hold their appearance over time while giving the rear of the car a darker, more modern look than a polished tip.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBorla tuned the S-Type for a deep, resonant tone at idle. The volume and intensity rise as throttle is applied and peak with an aggressive roar at wide-open throttle. The included X-pipe and mandrel-bent tubing are engineered to optimize exhaust flow.\u003c\/p\u003e\u003cp\u003eBorla also designed the system to keep cabin drone in check. You get a more aggressive exhaust note without the constant interior resonance that can make long highway drives tiring.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eIncludes an X-pipe that fits with the Mustang's existing exhaust setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides a deeper, more aggressive exhaust note than stock, from idle through wide-open throttle\u003c\/li\u003e\n\u003cli\u003eDesigned to minimize cabin drone, which helps on daily driving and long trips\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and mandrel-bent tubing are built for long-term durability\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant black chrome quad tips give the rear of the car a distinctive finish\u003c\/li\u003e\n\u003cli\u003eBolt-on design suits owners who do their own work\u003c\/li\u003e\n\u003cli\u003eBuilt specifically for Mustangs with the factory active exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system\u003c\/li\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eFour 4-inch black chrome exhaust tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305820123321,"sku":"BOR140962BC","price":2614.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140962BC-main-1-xlarge.jpg?v=1794430401"},{"product_id":"corsa-performance-3-0-dual-rear-exit-xtreme-cat-back-exhaust-system-with-4-5-black-pvd-pro-series-tips-2024-2026-mustang-gt-coupe-w-non-active-exhaust-21250","title":"Corsa Performance 3.0” Dual Rear Exit Xtreme Cat-Back Exhaust System with 4.5” Black PVD Pro Series Tips (2024-2026 Mustang GT Coupe w\/ Non-Active Exhaust) - 21250","description":"\u003cp\u003eThe Corsa Performance Xtreme Cat-Back Exhaust System, part number 21250, is a 3.0 inch dual rear exit system for the S650 Mustang GT coupe equipped with the non-active (non-valved) factory exhaust. It is built from T304 stainless steel with mandrel-bent tubing, uses an X-pipe in the layout, and finishes at the rear with 4.5 inch Pro-Series tips in a Black PVD finish.\u003c\/p\u003e\n\u003cp\u003eXtreme is the most aggressive sound level in the Corsa lineup. It produces a deep growl at startup, a hard-edged roar under throttle, and a high-pitched scream near the top of the rev range, while being engineered to keep cabin drone out of the car. For GT owners who want a much louder, more aggressive exhaust note that still bolts on and is built from stainless steel, this system is a direct match for the non-active exhaust platform.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system with dual rear exit\u003c\/li\u003e\n\u003cli\u003e3.0 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eX-pipe included in the system\u003c\/li\u003e\n\u003cli\u003e4.5 inch Pro-Series exhaust tips with Black PVD finish\u003c\/li\u003e\n\u003cli\u003eXtreme sound level: deep growl at startup, aggressive roar under acceleration, high-pitched scream at wide open throttle\u003c\/li\u003e\n\u003cli\u003eDesigned to minimize cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT coupe models with the non-active exhaust\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 21250\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds this system from T304 stainless steel, a material chosen for its corrosion resistance and ability to stand up to weather and road exposure over the long term. That makes it well suited to cars that see regular street use, not just fair-weather driving.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which keeps the inside diameter consistent through each bend and avoids the crimped, restrictive sections typical of conventional pipe bending. Combined with the 3.0 inch diameter and the included X-pipe, the layout is intended to keep exhaust gases moving smoothly from the catalytic converters to the tips.\u003c\/p\u003e\u003cp\u003eThe 4.5 inch Pro-Series tips carry a Black PVD finish that gives the rear of the car a dark, aggressive look, and Corsa states the tips are made to tolerate high exhaust temperatures without compromising their appearance.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Xtreme sound level is built around aggression. At startup, the system delivers a deep, throaty growl; as the throttle opens, the tone builds into a pronounced roar, and at wide open throttle it climbs into a sharp, high-pitched scream. It is aimed at drivers who want the Coyote V8 to sound noticeably louder and more aggressive than stock.\u003c\/p\u003e\u003cp\u003eDespite that volume, Corsa designs the system to keep cabin drone out of the car, so the aggressive character comes through without a persistent hum at steady cruising speeds.\u003c\/p\u003e\u003cp\u003eThe X-pipe and mandrel-bent 3.0 inch tubing are included to help optimize exhaust flow through the system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eX-pipe is included with the system\u003c\/li\u003e\n\u003cli\u003eIntended for vehicles with the non-active (non-valved) factory exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the most aggressive sound level Corsa offers for your Mustang GT, with a growl at idle and a scream at wide open throttle\u003c\/li\u003e\n\u003cli\u003eYou want a louder exhaust that is designed to avoid cabin drone during daily driving\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction resists corrosion and holds up to the elements\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 3.0 inch tubing and an X-pipe help optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eBlack PVD 4.5 inch Pro-Series tips give the rear of the car a darker, more aggressive appearance\u003c\/li\u003e\n\u003cli\u003eBolt-on design suits enthusiasts who handle their own installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT, Fastback\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eX-pipe\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305820844217,"sku":"COR21250BLK","price":1627.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21250_a_lowres_1ff55066-4813-4284-b9b7-f6fc06cdcd71.jpg?v=1794430799"},{"product_id":"borla-cat-back-exhaust-system-atak-black-chrome-quad-tips-2024-2026-mustang-w-non-active-exhaust-140970bc","title":"Borla Cat-Back Exhaust System - ATAK - Black Chrome Quad Tips (2024-2026 Mustang w\/ Non Active Exhaust) - 140970BC","description":"\u003cp\u003eThe Borla ATAK Cat-Back Exhaust System, part number 140970BC, replaces the factory exhaust from the catalytic converters back on late-model Mustangs built without the factory active exhaust. It is constructed from T304 stainless steel with 2.75-inch mandrel-bent tubing, includes an X-pipe, and finishes at four 4-inch tips in a black chrome finish.\u003c\/p\u003e\n\u003cp\u003eATAK is Borla's most aggressive sound option, and this system delivers a deep growl at startup that builds into a full roar at wide-open throttle. Borla engineers it to limit cabin drone, so the sound stays outside the car while you cruise. For owners of a non-active-exhaust Mustang who want a louder, more aggressive tone, a durable stainless build, and a bolt-on install, this system covers all three.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK sound level for an aggressive exhaust note\u003c\/li\u003e\n\u003cli\u003eCat-back configuration for Mustangs without the factory active exhaust\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.75-inch diameter mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eX-pipe included to improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eQuad exhaust tips, each 4 inches in diameter\u003c\/li\u003e\n\u003cli\u003eBlack chrome tip finish\u003c\/li\u003e\n\u003cli\u003eEngineered to keep cabin drone in check\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003ePart number 140970BC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this system from T304 stainless steel, a material chosen for long-term durability in an exhaust application. The tubing is mandrel-bent, so each bend keeps a consistent diameter instead of the crimped, narrowed sections that come from compression bending.\u003c\/p\u003e\u003cp\u003eThe 2.75-inch tubing is paired with an X-pipe, which joins the two exhaust banks to help optimize flow through the system. The four 4-inch tips have a black chrome finish that gives the rear of the car a darker, modern look.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe ATAK sound profile starts with a deep, aggressive growl at startup and gets louder as you open the throttle, reaching a full roar at wide-open throttle. It is aimed at drivers who want the exhaust to be clearly heard.\u003c\/p\u003e\u003cp\u003eBorla designs the system to control drone, so cabin noise at cruising speed stays manageable. You can hold a conversation or listen to music without the exhaust overpowering the interior.\u003c\/p\u003e\u003cp\u003eThe mandrel-bent tubing and included X-pipe are intended to improve exhaust flow over the factory system. Borla does not publish specific horsepower or torque figures for this part.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eX-pipe is included with the system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a louder, more aggressive exhaust note than the factory non-active system provides\u003c\/li\u003e\n\u003cli\u003eYou want added volume without heavy drone at cruising speed\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and mandrel-bent tubing give a durable system with consistent flow\u003c\/li\u003e\n\u003cli\u003eThe included X-pipe means you do not need to source a separate crossover\u003c\/li\u003e\n\u003cli\u003eBlack chrome quad 4-inch tips change the look of the rear of the car\u003c\/li\u003e\n\u003cli\u003eThe bolt-on design suits owners who do their own work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back exhaust system\u003c\/li\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eFour 4-inch black chrome exhaust tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305830019257,"sku":"BOR140970BC","price":2049.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140970BC-main-1-xlarge.jpg?v=1794430407"},{"product_id":"mbrp-aluminized-steel-3-race-cat-back-exhaust-w-dual-split-rear-2024-2026-mustang-gt-s7253al","title":"MBRP Aluminized Steel 3\" Race Cat-Back Exhaust w\/ Dual Split Rear (2024-2026 Mustang GT) – S7253AL","description":"\u003cp\u003eThe MBRP S7253AL is a Race Series cat-back exhaust for the S650 Mustang GT with the 5.0L Coyote V8. It uses full 3-inch mandrel-bent aluminized steel tubing in a straight-through, resonator-free layout and finishes in a dual split rear exit. MBRP built it for owners who care more about volume, an unfiltered V8 note, and freer exhaust flow than about a subdued cabin.\u003c\/p\u003e\n\u003cp\u003eCompared with the factory system, MBRP says this cat-back reduces backpressure, sharpens throttle response, and gives the Coyote a much more aggressive voice. Aluminized steel keeps the cost of a race-style system below that of T304 stainless, which makes the S7253AL a practical choice for a bolt-on build where sound and flow matter more than a show finish. It is a fixed, non-valved design and bolts in at the factory hanger locations without a tune.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart number S7253AL from MBRP's Race Series\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction\u003c\/li\u003e\n\u003cli\u003eFull 3-inch mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eStraight-through design with no resonators; factory resonators are eliminated\u003c\/li\u003e\n\u003cli\u003eDual split rear exit layout\u003c\/li\u003e\n\u003cli\u003eFixed configuration with no adjustability, set up for maximum flow and tone\u003c\/li\u003e\n\u003cli\u003eNo exhaust valves; not designed to integrate with factory active exhaust\u003c\/li\u003e\n\u003cli\u003eLighter than the factory exhaust, according to MBRP\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on at factory hanger locations with no cutting or welding\u003c\/li\u003e\n\u003cli\u003eNo tuning or ECU recalibration required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAluminized Steel, 3-Inch Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds the S7253AL from aluminized steel, a material chosen to handle exhaust heat and hard use while costing less than stainless. The trade-off is finish. MBRP positions this version for owners who prioritize sound and flow over a show-car appearance, and it offers T304 stainless systems for buyers who want that material.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel-bent at a full 3-inch diameter, so the pipe keeps its cross-section through each bend. According to MBRP, the system weighs less than the factory exhaust because the pipe walls are thinner and there is less internal baffling.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAs a Race Series system, the S7253AL drops the factory resonators and uses a straight-through path, which MBRP says delivers maximum volume and a raw V8 tone from the 5.0L. It is intended to be loud. Drivers who want a quieter setup for daily use should look at MBRP's other cat-back options for this platform.\u003c\/p\u003e\u003cp\u003eMBRP states that the 3-inch mandrel-bent tubing improves flow and power delivery across the rev range. Compared with stock, the company cites significantly lower backpressure and better throttle response. The dual split rear exit gives the back of the car a more aggressive look as part of a functional layout.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect bolt-on that uses the factory hanger locations\u003c\/li\u003e\n\u003cli\u003eNo cutting or welding required\u003c\/li\u003e\n\u003cli\u003eNo tuning or ECU recalibration needed\u003c\/li\u003e\n\u003cli\u003eNo additional hardware, modules, or sensors required, according to MBRP\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended if you do not have a lift or the proper tools\u003c\/li\u003e\n\u003cli\u003eIf you are pairing the system with aftermarket headers or mid-pipes, confirm flange diameter and location before installing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the subdued factory exhaust with a resonator-free, straight-through system for a louder, more aggressive Coyote V8 note\u003c\/li\u003e\n\u003cli\u003eFull 3-inch mandrel-bent tubing for improved flow and reduced backpressure compared with stock\u003c\/li\u003e\n\u003cli\u003eAluminized steel gives you race-style construction without paying for stainless\u003c\/li\u003e\n\u003cli\u003eBolts in at the factory hanger locations with no cutting, welding, or tuning\u003c\/li\u003e\n\u003cli\u003eWeighs less than the factory exhaust, according to MBRP\u003c\/li\u003e\n\u003cli\u003eA logical step in a full bolt-on build where sound and flow come first\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not fit EcoBoost or Dark Horse models\u003c\/li\u003e\n\u003cli\u003eNot compatible with factory active exhaust setups—this is a race exhaust with no valve integration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305833164985,"sku":"MBRPS7253AL","price":714.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_e21c80e9-2022-4dd4-a073-32b5529abe20.webp?v=1794435557"},{"product_id":"borla-cat-back-exhaust-system-s-type-stainless-steel-quad-tips-2024-2026-mustang-w-active-exhaust-140962","title":"Borla Cat-Back Exhaust System - S-Type - Stainless Steel Quad Tips (2024-2026 Mustang w\/ Active Exhaust) - 140962","description":"\u003cp\u003eThe Borla S-Type Cat-Back Exhaust System, part number 140962, is a T304 stainless steel replacement exhaust for current-generation Ford Mustangs equipped with the factory active exhaust. It replaces the stock system from the catalytic converters back with 2.75-inch mandrel-bent tubing, an included X-pipe, and four polished 4-inch stainless steel tips.\u003c\/p\u003e\n\u003cp\u003eBorla built the S-Type for owners who want a deeper, more aggressive exhaust note without living with constant cabin drone. The system bolts on, uses corrosion-resistant stainless construction throughout, and adds a quad-tip rear treatment that suits the Mustang's styling. It is a sensible choice for active-exhaust cars where sound character, flow, and long-term durability all matter.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCat-back configuration designed for Mustangs with factory active exhaust\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent internal diameter and flow\u003c\/li\u003e\n\u003cli\u003e2.75-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eX-pipe included\u003c\/li\u003e\n\u003cli\u003eQuad exhaust tips, 4 inches in diameter each\u003c\/li\u003e\n\u003cli\u003ePolished stainless steel finish\u003c\/li\u003e\n\u003cli\u003eS-Type sound profile: deep, aggressive tone at startup that builds with throttle\u003c\/li\u003e\n\u003cli\u003eEngineered to keep cabin drone in check\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eBorla part number 140962\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla fabricates the S-Type system from T304 stainless steel, an alloy chosen for its resistance to corrosion and its ability to hold up to repeated heat cycling. The finished surfaces are polished, giving the visible components a bright, clean appearance.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which keeps the pipe diameter consistent through each bend rather than allowing the crimping and narrowing typical of press-bent pipe. Combined with the 2.75-inch diameter, this approach supports smooth exhaust flow along with long-term structural durability.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe included X-pipe merges and balances the exhaust pulses from both banks, which Borla credits with improving exhaust flow. Paired with the mandrel-bent 2.75-inch tubing, the system is designed to move exhaust gases more efficiently than the factory setup. Borla does not publish specific horsepower or torque figures for this system.\u003c\/p\u003e\u003cp\u003eIn terms of sound, the S-Type delivers a deep, aggressive tone from the moment the engine starts. The volume and intensity increase progressively as you open the throttle, reaching a strong, assertive roar at wide-open throttle.\u003c\/p\u003e\u003cp\u003eBorla has tuned the S-Type to limit the cabin drone that often comes with louder aftermarket exhaust, so the car remains comfortable at steady cruising speeds while retaining its aggressive character under acceleration.\u003c\/p\u003e\u003cp\u003eAt the rear, four 4-inch polished stainless steel tips provide a substantial, finished look that complements the Mustang's rear styling.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a bolt-on installation\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for Mustangs equipped with factory active exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a noticeably deeper and more aggressive exhaust note than the factory system provides on your active-exhaust Mustang.\u003c\/li\u003e\n\u003cli\u003eYou want added sound without the constant cabin drone that can make highway driving tiresome.\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction with a polished finish offers corrosion resistance and a clean appearance over the long term.\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.75-inch tubing and an included X-pipe support improved exhaust flow.\u003c\/li\u003e\n\u003cli\u003eThe bolt-on design suits enthusiasts who handle their own upgrades.\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch polished tips give the rear of the car a finished, purposeful look.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla S-Type cat-back exhaust system\u003c\/li\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch polished stainless steel tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305833689273,"sku":"BOR140962","price":2514.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140962-main-1-xlarge.jpg?v=1794430409"},{"product_id":"mbrp-3-street-cat-back-exhaust-dual-rear-exit-w-quad-tips-t304-2024-2026-mustang-gt-gt-premium-s7280304","title":"MBRP 3\" Street Cat-Back Exhaust – Dual Rear Exit w\/ Quad Tips (T304) (2024-2026 Mustang GT \/ GT Premium) – S7280304","description":"\u003cp\u003eThe MBRP S7280304 is a 3-inch Street Series cat-back exhaust for the S650 Mustang GT with the 5.0L Coyote V8. It uses a dual rear exit layout finished with four polished tips, and both the piping and the tips are made from T304 stainless steel. MBRP designed it for owners who want a deeper, more assertive exhaust note, improved flow, and a quad-tip rear appearance in place of the factory system while keeping the car comfortable to drive every day.\u003c\/p\u003e\n\u003cp\u003eAs part of MBRP's Street Series, this system includes resonators that reduce interior drone at cruising speeds while letting the Coyote's deep tone come through under heavier throttle. The 3-inch mandrel-bent tubing reduces restriction, and the T304 stainless construction resists salt, road grime, and heat, which suits year-round driving and high-mileage cars. It is a non-valved system and needs no ECU tuning or speedometer recalibration. It bolts directly to cars equipped with the quad-tip rear valance.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch mandrel-bent tubing for reduced restriction and better exhaust velocity\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel piping throughout\u003c\/li\u003e\n\u003cli\u003eFour 4-inch polished T304 stainless steel tips in a dual rear exit layout\u003c\/li\u003e\n\u003cli\u003eStreet Series tuning with resonators to keep interior drone low\u003c\/li\u003e\n\u003cli\u003eDeeper exhaust tone and sharper response under load, per MBRP\u003c\/li\u003e\n\u003cli\u003eLighter than the factory system thanks to its high-flow design and fewer restrictive elements, per MBRP\u003c\/li\u003e\n\u003cli\u003eFixed geometry designed to fit the quad-exit rear valance\u003c\/li\u003e\n\u003cli\u003eNon-valved design with no active exhaust valve integration\u003c\/li\u003e\n\u003cli\u003eNo ECU tuning or speedometer recalibration required\u003c\/li\u003e\n\u003cli\u003eMBRP part number S7280304\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds the S7280304 from T304 stainless steel, including both the piping and the polished quad tips. T304 holds up to corrosion and is strong, so the system tolerates road salt, grime, and exhaust heat. That makes it a good fit for cars driven through winter in harsh climates and for high-mileage builds where a mild steel system might corrode.\u003c\/p\u003e\u003cp\u003eThe tubing is 3-inch mandrel-bent, so the pipe keeps its full diameter through every bend instead of narrowing as it would with crush bending. The system has fixed geometry engineered to line up with the quad-exit rear valance, which places the four 4-inch tips correctly at the back of the car.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Street Series is MBRP's more controlled-volume option. Resonators in the system reduce drone inside the cabin during steady driving, while the 5.0L Coyote still produces a rich, deep tone when you open the throttle. MBRP states the system also sharpens response under load.\u003c\/p\u003e\u003cp\u003eThe 3-inch mandrel-bent tubing reduces restriction and improves exhaust velocity, and MBRP says this improves performance across the powerband. MBRP also states the system weighs less than the factory exhaust because of its high-flow design and fewer restrictive elements. No horsepower, torque, or weight figures are provided.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolts on directly for vehicles equipped with the quad-tip rear valance\u003c\/li\u003e\n\u003cli\u003eA quad-tip rear valance is required for proper fitment; vehicles with the factory dual-tip valance will need a valance upgrade\u003c\/li\u003e\n\u003cli\u003eNo ECU tuning or speedometer recalibration needed\u003c\/li\u003e\n\u003cli\u003eNon-valved system; it does not integrate with the factory active exhaust valves\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended to ensure proper tip alignment and clearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory cat-back with 3-inch mandrel-bent tubing for less restriction\u003c\/li\u003e\n\u003cli\u003eResonated Street Series design adds a deeper V8 tone while limiting cabin drone for daily driving\u003c\/li\u003e\n\u003cli\u003eT304 stainless piping and tips resist salt and corrosion, which suits year-round and high-mileage use\u003c\/li\u003e\n\u003cli\u003eFour 4-inch polished tips give the rear of the car a quad-exit appearance\u003c\/li\u003e\n\u003cli\u003eWorks without ECU tuning or speedometer recalibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT \/ Dark Horse \/ EcoBoost (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with EcoBoost or Dark Horse trims\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305990418617,"sku":"MBRPS7280304","price":1339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_02ec4d52-69d9-432c-8d21-de4a7bf2d7bc.webp?v=1794435560"},{"product_id":"mbrp-2018-2026-ford-mustang-gt-street-exhaust-with-race-sound-conversion-3-aluminized-steel","title":"MBRP 2018-2026 Ford Mustang GT Street Exhaust with Race Sound Conversion (3\" Aluminized Steel)","description":"\u003cp\u003eThe MBRP Street Exhaust with Race Sound Conversion is a 3-inch aluminized steel component for the 2018 and newer Ford Mustang GT. It is designed to work with MBRP's own exhaust systems. MBRP states that this product pairs specifically with its S7205 and S7280 systems, and the listed fitment is based on those systems. It moves the exhaust note to MBRP's Race Profile, the most aggressive sound level in the company's lineup.\u003c\/p\u003e\n\u003cp\u003eThis conversion suits Mustang GT owners who already run, or plan to run, one of the matching MBRP systems and want a louder, track-oriented exhaust tone. MBRP describes the Race Profile character as its most aggressive sound, meant to give the car the voice of a dedicated race machine every time the throttle opens.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRace Sound Conversion that brings the exhaust note up to MBRP's Race Profile sound level\u003c\/li\u003e\n\u003cli\u003eDesigned specifically to pair with MBRP exhaust systems S7205 and S7280\u003c\/li\u003e\n\u003cli\u003eListed fitment is based on the compatible S7205 and S7280 systems\u003c\/li\u003e\n\u003cli\u003e3-inch tubing diameter\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction\u003c\/li\u003e\n\u003cli\u003eDeveloped for the 2018 and newer Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e3-Inch Aluminized Steel Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds this conversion from aluminized steel in a 3-inch diameter. The size is chosen to integrate with the brand's matching S7205 and S7280 systems for the Mustang GT.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRace Profile is MBRP's most aggressive exhaust sound category. This conversion is intended to deliver that character, giving the Mustang GT's V8 a louder, more pronounced note under acceleration that MBRP compares to a race car.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides a direct path to MBRP's Race Profile sound for owners running the compatible S7205 or S7280 systems\u003c\/li\u003e\n\u003cli\u003eBuilt in a 3-inch diameter to match the corresponding MBRP systems\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction from an established exhaust manufacturer\u003c\/li\u003e\n\u003cli\u003eSuits enthusiasts who want the most aggressive exhaust tone MBRP offers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305991205049,"sku":"MBRPMDA7205","price":324.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_120e9bd1-6b24-43e2-ad9a-50b8eb59b8b3.webp?v=1794435563"},{"product_id":"borla-cat-back-exhaust-system-atak-stainless-steel-dual-tips-2024-2026-mustang-w-non-active-exhaust-140961","title":"Borla Cat-Back Exhaust System -ATAK - Stainless Steel Dual Tips (2024-2026 Mustang w\/ Non Active Exhaust) - 140961","description":"\u003cp\u003eThe Borla ATAK cat-back exhaust system, part number 140961, is a bolt-on replacement for the factory exhaust from the catalytic converters back on late-model S650 Mustangs equipped with the non-active (non-valved) exhaust. It is built from T304 stainless steel with 2.75-inch mandrel-bent tubing, an X-pipe, and dual 4-inch polished stainless tips.\u003c\/p\u003e\n\u003cp\u003eATAK is Borla's most aggressive sound level. This system suits owners who want a deep tone at idle and a strong, loud note under throttle, along with improved flow over the stock exhaust. Borla says the system is engineered to keep drone out of the cabin. The stainless construction resists corrosion for long-term ownership, and the bolt-on design lets the system go on without permanent changes to the car.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK cat-back exhaust system, part number 140961\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustangs with non-active (non-valved) exhaust\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.75-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eX-pipe included for flow optimization\u003c\/li\u003e\n\u003cli\u003eDual 4-inch tips\u003c\/li\u003e\n\u003cli\u003ePolished finish\u003c\/li\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003cli\u003eEngineered to limit cabin drone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds the ATAK system from T304 stainless steel, chosen for strength and corrosion resistance. That makes it a durable, long-term upgrade for a car that sees regular use.\u003c\/p\u003e\u003cp\u003eThe 2.75-inch tubing is mandrel-bent. This keeps the pipe diameter consistent through each bend, so exhaust gases move through the system smoothly. The dual 4-inch tips are also polished stainless steel, giving the rear of the car a clean, finished look that matches the rest of the system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe ATAK sound profile is aggressive from startup. At idle it produces a deep, throaty tone, and under acceleration it builds into a loud, pronounced roar.\u003c\/p\u003e\u003cp\u003eBorla states that the system is engineered to keep drone out of the cabin. The goal is aggressive exterior sound without excessive noise inside the car at cruise.\u003c\/p\u003e\u003cp\u003eThe included X-pipe and mandrel-bent 2.75-inch tubing are intended to optimize exhaust flow through the system. Borla does not publish specific horsepower or torque figures for this part.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003cli\u003eIntended for vehicles with the non-active (non-valved) factory exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelivers Borla's most aggressive ATAK sound level for owners who want a loud, deep exhaust note\u003c\/li\u003e\n\u003cli\u003eEngineered to limit cabin drone, which helps on longer drives\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction resists corrosion\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.75-inch tubing and an X-pipe improve flow compared with restrictive bends\u003c\/li\u003e\n\u003cli\u003eDual 4-inch polished stainless tips give the rear of the car a clean, upgraded look\u003c\/li\u003e\n\u003cli\u003eBolt-on design works for owners who handle their own installs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eDual 4-inch polished stainless steel tips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305991499961,"sku":"BOR140961","price":1724.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140961-main-1-xlarge.jpg?v=1794430411"},{"product_id":"corsa-performance-3-0-cat-back-exhaust-resonated-hh-pipe-with-4-0-black-pvd-slash-cut-tips-2024-2026-mustang-gt-coupe-w-active-exhaust-21261blk-lp-exh-14502r","title":"Corsa Performance 3.0\" Cat-Back Exhaust: Resonated HH-Pipe with 4.0\" Black PVD Slash Cut Tips - (2024-2026 Mustang GT Coupe w\/ Active Exhaust) - 21261BLK-LP-EXH-14502R","description":"\u003cp\u003eThe Corsa Performance 3.0 inch cat-back exhaust is a T304 stainless steel system with an H-pipe and 4.0 inch Black PVD slash-cut tips, built for the current-generation Mustang GT coupe equipped with the factory active exhaust. It replaces the stock exhaust from the catalytic converters back with mandrel-bent 3.0 inch tubing intended to improve exhaust flow and change the car's sound.\u003c\/p\u003e\n\u003cp\u003eThe system centers on Corsa's RSC (Reflective Sound Cancellation) technology, which targets cabin drone so the car stays comfortable on the highway while still sounding aggressive under load. For Mustang GT owners who want a deeper, more pronounced exhaust note, a corrosion-resistant stainless build, and a bolt-on installation, this system covers sound, flow, and appearance in one package.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003e4.0 inch slash-cut exhaust tips\u003c\/li\u003e\n\u003cli\u003eBlack PVD tip finish\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for durability and exhaust flow\u003c\/li\u003e\n\u003cli\u003eH-pipe design\u003c\/li\u003e\n\u003cli\u003eCorsa RSC (Reflective Sound Cancellation) technology for drone control\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT coupe models with active exhaust\u003c\/li\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eCorsa part number reference: 21261BLK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds this cat-back from T304 stainless steel, a material chosen for its durability and long-term resistance to corrosion. The tubing is mandrel-bent, so the pipe holds its full diameter through each bend. That supports consistent exhaust flow and avoids the crimped sections that come with crush bending.\u003c\/p\u003e\u003cp\u003eCorsa precision-engineers the components to work together as a complete system, from the H-pipe back to the tips. The 4.0 inch slash-cut tips have a Black PVD finish that gives the rear of the car a modern look, and Corsa states they are built to hold up to the demands of high-performance driving.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCorsa describes the sound as a deep, aggressive growl at startup that turns into a fuller, throaty roar on acceleration, finishing with a sharp high-performance tone near the top of the rev range. The goal is an exhaust note that suits the character of the Mustang GT's V8.\u003c\/p\u003e\u003cp\u003eDrone is managed with Corsa's RSC (Reflective Sound Cancellation) technology, which is designed to cut the low-frequency resonance that typically builds in the cabin at cruising speeds. This lets the system keep its aggressive character without making long drives tiring. The 3.0 inch mandrel-bent tubing is intended to improve exhaust flow over the factory system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eCorsa describes the installation process as straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory cat-back with a T304 stainless steel system intended for long-term durability\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 3.0 inch tubing supports improved exhaust flow\u003c\/li\u003e\n\u003cli\u003eRSC technology addresses cabin drone, which helps if the car is driven daily or on long trips\u003c\/li\u003e\n\u003cli\u003eDelivers a deeper, more aggressive V8 sound that builds with engine speed\u003c\/li\u003e\n\u003cli\u003e4.0 inch Black PVD slash-cut tips update the rear styling\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT coupes with the factory active exhaust\u003c\/li\u003e\n\u003cli\u003eBolt-on design keeps installation manageable for home mechanics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang GT, Fastback\u003c\/li\u003e\u003c\/ul\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305991827641,"sku":"COR21261BLK-LP-EXH-14502R","price":2839.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/21261_a_lowres_8e2f56be-ac69-4037-b32a-2f134db07ea8.jpg?v=1794434195"},{"product_id":"mbrp-3-race-cat-back-exhaust-dual-rear-exit-w-quad-tips-aluminized-steel-2024-2026-mustang-gt-gt-premium-s7282al","title":"MBRP 3\" Race Cat-Back Exhaust – Dual Rear Exit w\/ Quad Tips (Aluminized Steel) (2024-2026 Mustang GT \/ GT Premium) – S7282AL","description":"\u003cp\u003eThe MBRP S7282AL is a 3-inch Race cat-back exhaust built for the S650-generation Mustang GT with the 5.0L Coyote V8. It removes the factory mufflers and resonators and replaces them with straight-through, mandrel-bent 3-inch aluminized steel piping. The system ends in quad 4-inch polished stainless tips and is laid out specifically for the quad-exit rear valance.\u003c\/p\u003e\n\u003cp\u003eThis system is meant for owners who want a loud, unfiltered exhaust note and do not need stainless steel tubing. Because it uses aluminized steel instead of T304 stainless, it costs less while keeping the same muffler-delete layout and full 3-inch diameter. It suits street cars with bolt-on upgrades and track-day builds where sound and flow matter more than refinement or quiet cruising.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRace-style muffler-delete design with no mufflers or resonators, for an aggressive exhaust tone from idle to redline\u003c\/li\u003e\n\u003cli\u003eStraight-through 3-inch mandrel-bent tubing for smoother exhaust flow, sharper throttle response, and a freer-revving top end\u003c\/li\u003e\n\u003cli\u003eAluminized steel tubing, chosen to keep the cost down for budget-focused builds\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch polished stainless steel tips\u003c\/li\u003e\n\u003cli\u003eFixed layout designed specifically for the quad-exit rear valance\u003c\/li\u003e\n\u003cli\u003eLighter than the factory system because the mufflers and resonators are removed\u003c\/li\u003e\n\u003cli\u003eNo tuning or ECU recalibration required\u003c\/li\u003e\n\u003cli\u003eManufacturer part number S7282AL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAluminized Steel Construction with Polished Stainless Quad Tips\u003c\/h3\u003e\u003cp\u003eMBRP builds the S7282AL tubing from aluminized steel, an alternative to T304 stainless that keeps the system's cost down. The piping is mandrel-bent at a constant 3-inch diameter, so the tubing does not narrow at the bends.\u003c\/p\u003e\u003cp\u003eThe four 4-inch tips are polished stainless steel. The layout is fixed rather than adjustable because MBRP designed it around the quad-exit rear valance.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith the factory mufflers and resonators gone, the S7282AL gives the 5.0L Coyote a full-volume, track-inspired tone instead of the stock note. MBRP describes the sound as wide open and aggressive across the entire rev range. It is not intended for quiet commuting.\u003c\/p\u003e\u003cp\u003eThe straight-through 3-inch mandrel-bent path is intended to reduce restriction for smoother flow, which MBRP links to better throttle response and a freer-revving top end. Removing the sound-suppression hardware also makes the system lighter than the factory exhaust.\u003c\/p\u003e\u003cp\u003eThe system does not support the factory active exhaust features. It has no valve actuators and no wiring provisions.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolts on directly on cars equipped with the quad-tip rear valance\u003c\/li\u003e\n\u003cli\u003eFactory dual-tip cars require a rear valance swap to the quad-tip valance for proper fitment\u003c\/li\u003e\n\u003cli\u003eNo tuning or ECU recalibration is needed\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended for best tip alignment and clearance\u003c\/li\u003e\n\u003cli\u003eFactory active exhaust valve actuators and wiring are not supported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a raw, loud exhaust note and are willing to give up the quiet cruising and active exhaust modes of the factory system\u003c\/li\u003e\n\u003cli\u003eYou prefer the lower cost of aluminized steel over stainless steel for a bolt-on or track-day build\u003c\/li\u003e\n\u003cli\u003eThe 3-inch mandrel-bent, straight-through layout removes the restriction of the factory mufflers and resonators\u003c\/li\u003e\n\u003cli\u003eThe system works without a tune, so the exhaust upgrade does not require ECU changes\u003c\/li\u003e\n\u003cli\u003eRemoving the mufflers and resonators cuts weight compared with the stock exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2026 Ford Mustang GT \/ Dark Horse \/ EcoBoost (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with EcoBoost or Dark Horse trims\u003c\/li\u003e\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305992679609,"sku":"MBRPS7282AL","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_bbfee178-b3a1-40e7-8204-a0d8102a8fc1.webp?v=1794435563"},{"product_id":"borla-cat-back-exhaust-system-atak-carbon-fiber-quad-tips-2024-2026-mustang-w-active-exhaust-140963cfba","title":"Borla Cat-Back Exhaust System - ATAK - Carbon Fiber Quad Tips (2024-2026 Mustang w\/ Active Exhaust) - 140963CFBA","description":"\u003cp\u003eThe Borla ATAK cat-back exhaust system, part number 140963CFBA, is built for the current-generation Ford Mustang equipped with the factory active exhaust. It runs 2.75-inch mandrel-bent T304 stainless steel tubing, includes an X-pipe, and finishes with four 4-inch carbon fiber tips. Borla describes the ATAK sound as a deep, aggressive growl at idle that builds into a ferocious roar at wide-open throttle.\u003c\/p\u003e\n\u003cp\u003eThe system targets owners who want a much more assertive exhaust note than stock without putting up with cabin drone on the highway. Borla states the system is designed to eliminate drone, and its bolt-on design suits enthusiasts who handle their own installs. The stainless construction and carbon fiber tips address long-term durability and appearance.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla ATAK cat-back exhaust system, part number 140963CFBA\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang models equipped with the factory active exhaust\u003c\/li\u003e\n\u003cli\u003e2.75-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for optimized exhaust flow\u003c\/li\u003e\n\u003cli\u003eX-pipe included\u003c\/li\u003e\n\u003cli\u003eQuad 4-inch tips with a carbon fiber finish\u003c\/li\u003e\n\u003cli\u003eTips rated by the manufacturer to withstand high temperatures and resist corrosion\u003c\/li\u003e\n\u003cli\u003eAggressive sound profile: deep growl at idle that builds to a roar at wide-open throttle\u003c\/li\u003e\n\u003cli\u003eEngineered by Borla to eliminate cabin drone\u003c\/li\u003e\n\u003cli\u003eBolt-on design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this cat-back from T304 stainless steel, chosen for its strength and durability in an exhaust application. The tubing is mandrel-bent, which keeps the 2.75-inch diameter consistent through each bend rather than crimping it. That preserves flow through the system.\u003c\/p\u003e\u003cp\u003eThe system ends in four 4-inch tips with a carbon fiber finish. According to Borla, the tips are made to hold up to high temperatures and resist corrosion, so they keep their appearance as well as their function over time.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe ATAK sound profile is Borla's aggressive option. At idle the system produces a deep growl, and the volume and intensity build as you open the throttle until it reaches a full roar at wide-open throttle. This tuning is meant for drivers who want the car to sound noticeably more aggressive.\u003c\/p\u003e\u003cp\u003eEven with that much volume available, Borla says the system is designed to eliminate cabin drone. That makes it more livable during steady-state cruising while keeping the aggressive character under acceleration.\u003c\/p\u003e\u003cp\u003eThe included X-pipe and mandrel-bent 2.75-inch tubing are intended to improve exhaust flow compared with a restrictive layout. Borla references performance gains but does not publish specific horsepower or torque figures for this system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on design, according to the manufacturer\u003c\/li\u003e\n\u003cli\u003eIntended for vehicles equipped with the factory active exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a substantially more aggressive exhaust note than stock, from idle through wide-open throttle\u003c\/li\u003e\n\u003cli\u003eYour Mustang has the factory active exhaust, which this system is designed to work with\u003c\/li\u003e\n\u003cli\u003eYou want to reduce the risk of cabin drone on long drives, which Borla says this system is engineered to eliminate\u003c\/li\u003e\n\u003cli\u003eYou want durable T304 stainless steel with mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eYou want an included X-pipe as part of the cat-back\u003c\/li\u003e\n\u003cli\u003eYou want the look of four 4-inch carbon fiber tips\u003c\/li\u003e\n\u003cli\u003eYou want a bolt-on system you can install yourself\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2024 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eX-pipe\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305993203897,"sku":"BOR140963CFBA","price":3074.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/140963CFBA-main-1-xlarge.jpg?v=1794430412"}],"url":"https:\/\/engmustangs.com\/collections\/s650-cat-back-exhaust.oembed","provider":"ENG Mustangs","version":"1.0","type":"link"}