{"title":"S550 Mustang X-Pipes \u0026 Mid-Pipes","description":null,"products":[{"product_id":"corsa-2015-2026-ford-mustang-gt-dark-horse-3-double-h-pipe-with-stainless-steel-construction-5-0l","title":"CORSA 2015-2026 Ford Mustang GT\/Dark Horse 3\" Double H-Pipe with Stainless Steel Construction (5.0L)","description":"\u003cp\u003eThe CORSA 3.0-inch Double H-Pipe replaces the factory mid-pipe section on the 5.0L Coyote-powered Ford Mustang GT, including the Dark Horse, from 2015 through 2026. It is designed to work as part of a complete CORSA exhaust system, giving the V8 a more aggressive voice while keeping highway cruising free of drone.\u003c\/p\u003e\n\u003cp\u003eFor owners who already run an axle-back or plan a full exhaust build, this H-pipe is a straightforward way to raise the sound level and improve exhaust flow without welding or cutting. It suits drivers who want a noticeably stronger exhaust note that stays civil on long drives.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0-inch double H-pipe design for the 5.0L V8\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction\u003c\/li\u003e\n\u003cli\u003eEstimated 23.43% increase in exhaust flow, per CORSA (actual results may vary)\u003c\/li\u003e\n\u003cli\u003eAggressive sound through the gears with a distinct rumble at idle\u003c\/li\u003e\n\u003cli\u003eNo drone during cruise\u003c\/li\u003e\n\u003cli\u003eMoves an axle-back exhaust system up one sound level\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered and manufactured in Berea, Ohio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCORSA builds this H-pipe from premium stainless steel, chosen for its performance, appearance and contribution to the system's sound. Each pipe is made for specific vehicles to ensure correct fitment and performance.\u003c\/p\u003e\u003cp\u003eEvery unit is designed, engineered and manufactured by CORSA in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe double H-pipe layout increases exhaust flow by an estimated 23.43% according to CORSA, with actual results varying by vehicle. On the street, it delivers an aggressive, high-performance tone through the gears and a distinct rumble at idle.\u003c\/p\u003e\u003cp\u003ePaired with an axle-back system, it raises the overall sound by one level, while CORSA's design keeps the cabin free of drone at cruising speed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation; no welding needed\u003c\/li\u003e\n\u003cli\u003eIncludes the necessary hardware and detailed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds volume and character to an existing CORSA axle-back without introducing highway drone\u003c\/li\u003e\n\u003cli\u003eImproves exhaust flow over the factory mid-pipe section\u003c\/li\u003e\n\u003cli\u003eBolts on with no welding or fabrication\u003c\/li\u003e\n\u003cli\u003eBacked by a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang Dark Horse \/ GT (5.0L), Fastback\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L), Convertible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble H-pipe\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLimited lifetime warranty with proof of purchase, for as long as you own the vehicle. The exhaust must be installed on the specified vehicle for the warranty to remain valid.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68304222191801,"sku":"COR14502","price":614.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/Picture1.jpg?v=1794370743"},{"product_id":"mbrp-3-exhaust-resonator-delete-x-pipe-stainless-steel-2020-2022-shelby-gt500-2026-mustang-dark-horse-sc-s7219409","title":"MBRP 3\" Exhaust Resonator Delete X-Pipe - Stainless Steel (2020-2022 Shelby GT500 \/ 2026 Mustang Dark Horse SC) - S7219409","description":"\u003cp\u003eThe MBRP XP-Series 3-inch Resonator Delete X-Pipe replaces the factory resonator section on the 2020-2022 Shelby GT500 and the 2026 Mustang Dark Horse SC. It is mandrel-bent stainless steel and is designed to raise the sound level and attitude of these supercharged Mustangs.\u003c\/p\u003e\n\u003cp\u003eThe factory resonator restricts both sound and exhaust flow. Swapping it for this free-flowing X-pipe increases flow, removes weight and gives the car a more aggressive tone, all in one relatively simple modification.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch X-pipe that replaces the factory resonators\u003c\/li\u003e\n\u003cli\u003eMandrel-bent for maximum flow\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eReduces back pressure and increases exhaust flow\u003c\/li\u003e\n\u003cli\u003eLighter than the factory section and resonators\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary clamps\u003c\/li\u003e\n\u003cli\u003eNo welding or tuning required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent Stainless Steel\u003c\/h3\u003e\u003cp\u003eMBRP builds this X-pipe from stainless steel and mandrel-bends the tubing to keep its full diameter through every bend for maximum flow.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonators opens up exhaust flow and noticeably increases the sound level, while the X-pipe design gives these cars a more aggressive tone. It is also lighter than the factory parts it replaces.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires cutting the factory exhaust piping; after that, it is a bolt-in installation\u003c\/li\u003e\n\u003cli\u003eNo welding required\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eAll necessary clamps are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMuch more sound from a GT500 or Dark Horse SC\u003c\/li\u003e\n\u003cli\u003eBetter exhaust flow and less weight than the factory resonators\u003c\/li\u003e\n\u003cli\u003eSimple modification with no welding or tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2020-2022 Ford Mustang GT500\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang Dark Horse SC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWill NOT fit any other Mustang models beyond those listed above\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eAll necessary clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68304223928505,"sku":"MBRPS7219409","price":304.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_fb941d06-3b5c-4952-a7ad-f5cda0c32620.webp?v=1794435503"},{"product_id":"steeda-2015-2026-ford-mustang-gt-resonator-delete-h-pipe-with-304-stainless-steel-construction-direct-fit","title":"Steeda 2015-2026 Ford Mustang GT Resonator Delete H-Pipe with 304 Stainless Steel Construction (Direct-Fit)","description":"\u003cp\u003eThe Steeda Resonator Delete H-Pipe is a 304 stainless steel mid-pipe that takes the place of the factory resonator assembly on S550 and S650 Mustangs powered by the 5.0L Coyote V8. It is built from 2.5 inch mandrel-bent tubing and uses an H-style crossover design. It fits in the exhaust system downstream of the stock catalytic converters and upstream of the OEM mufflers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Steeda states gains of up to +2 hp and up to +2 lb-ft of torque. The manufacturer does not list specific test conditions for these figures.\u003c\/p\u003e\n\u003cp\u003eRemoving the resonator gives the exhaust a deeper, traditional muscle car tone, and the H-pipe layout is designed to build low-RPM torque compared to the factory resonator. It also cuts up to 6.5 pounds from the car. The pipe is intended for GT, Mach 1, and Bullitt models. It keeps the factory heat shields used on 2018 and newer GTs, works with virtually all aftermarket axle-back systems, and does not need a tune. That makes it a practical, budget-minded way to change the character of a Coyote-powered Mustang.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.5 inch diameter mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover design that replaces the factory resonator\u003c\/li\u003e\n\u003cli\u003e32 inch overall length\u003c\/li\u003e\n\u003cli\u003eUp to 6.5 lbs lighter than the factory setup\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated gains of up to +2 hp and up to +2 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eImproves low-end torque compared to the factory resonator\u003c\/li\u003e\n\u003cli\u003eDeep, traditional muscle car exhaust note\u003c\/li\u003e\n\u003cli\u003eRetains the factory exhaust heat shields on 2018 and newer GT models without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eFlush-fit band clamps allow the pipe to be shortened if needed and help prevent leaks common with expanded-end kits\u003c\/li\u003e\n\u003cli\u003eSupplied band clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually all aftermarket axle-back exhaust kits\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003cli\u003eIntended for Mustang GT, Bullitt, and Mach 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this H-pipe from 304 stainless steel. 409 stainless often develops surface rust, and aluminized mild steel can corrode all the way through, while 304 resists both. That makes it a good choice for cars driven year-round or in wet climates.\u003c\/p\u003e\u003cp\u003eThe 2.5 inch tubing is mandrel bent, so the pipe keeps a consistent diameter through each bend. The pipe joins the exhaust with flush-fit band clamps rather than expanded slip-fit ends. Steeda notes that this approach avoids the exhaust leaks common with expanded-end kits and also lets the installer trim the pipe to a shorter length when needed.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith the factory resonator removed and the H-style crossover in place, the exhaust develops a deeper, more traditional muscle car tone. Steeda states that the H design increases torque at lower RPM compared to the factory resonator. The manufacturer quotes up to +2 hp and up to +2 lb-ft of torque, and no tune is required.\u003c\/p\u003e\u003cp\u003eSwapping the resonator assembly for this pipe saves up to 6.5 pounds. Because it works with virtually all aftermarket axle-back kits, it can be added to an existing rear exhaust or used as one step in a staged exhaust build.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCutting of the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market\u003c\/li\u003e\n\u003cli\u003eThe H-pipe mounts downstream of the stock catalytic converters and ahead of the OEM mufflers\u003c\/li\u003e\n\u003cli\u003eFactory heat shields on 2018 and newer GT models can stay in place without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the pipe to be cut to a shorter length if needed\u003c\/li\u003e\n\u003cli\u003eThe supplied band clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003cli\u003eNo tune is required after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a deeper, traditional V8 exhaust tone from your Coyote-powered Mustang without replacing the entire system\u003c\/li\u003e\n\u003cli\u003eThe H-pipe layout targets low-RPM torque compared to the factory resonator\u003c\/li\u003e\n\u003cli\u003eIt removes up to 6.5 pounds from the car\u003c\/li\u003e\n\u003cli\u003e304 stainless steel resists the surface rust and rust-through seen with 409 stainless and aluminized steel\u003c\/li\u003e\n\u003cli\u003eOn 2018 and newer GTs, you can keep the factory heat shields without modifying them\u003c\/li\u003e\n\u003cli\u003eIt pairs with virtually all aftermarket axle-back kits\u003c\/li\u003e\n\u003cli\u003eNo tune is needed, and the supplied clamps let you return to the factory resonator if you choose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT \/ Mach 1 \/ Bullitt\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel resonator delete H-pipe\u003c\/li\u003e\n\u003cli\u003eBand clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304692084921,"sku":"SDA-555-3619","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3619_P04.jpg?v=1794436008"},{"product_id":"steeda-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-304-stainless-steel-construction-direct-fit","title":"Steeda 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with 304 Stainless Steel Construction (Direct-Fit)","description":"\u003cp\u003eThe Steeda Resonator Delete X-Pipe replaces the factory resonator section on 5.0L Coyote-powered S550 and S650 Mustangs. It is built from T-304 stainless steel using mandrel-bent 2.5-inch diameter tubing, and it mounts in the factory location between the stock catalytic converters and the stock mufflers. Removing the resonators and adding an X-style crossover changes the exhaust note to a more aggressive, race-inspired tone. Steeda also cites gains in output, flow, and weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Steeda states gains of up to +8 hp and up to +9.5 lb-ft of torque. The manufacturer notes that no tune is required. No further test conditions are specified.\u003c\/p\u003e\n\u003cp\u003eThis part suits GT, Bullitt, Mach 1, and Dark Horse owners who want a sharper sound and a measurable improvement without a tune. Steeda states it works with virtually all aftermarket axle-back systems, so it can pair with an existing or planned rear exhaust. On 2018 and newer GT models, it keeps the factory exhaust heat shields without modifying either the pipe or the shields. The band clamps also leave a path back to stock, because they allow the factory resonator to be reinstalled.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eT-304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.5-inch diameter tubing\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover with a smooth transition, which Steeda says creates more scavenging than traditional H-pipe designs\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated exhaust flow improvement of up to 20% over the factory resonator and H-pipe designs\u003c\/li\u003e\n\u003cli\u003eUp to +8 hp and up to +9.5 lb-ft of torque, per Steeda\u003c\/li\u003e\n\u003cli\u003eSheds up to 7 lb compared to the factory resonator section\u003c\/li\u003e\n\u003cli\u003e32-inch overall length\u003c\/li\u003e\n\u003cli\u003eFlush-fit band clamps allow the X-pipe to be shortened if needed\u003c\/li\u003e\n\u003cli\u003eClamp design helps prevent the exhaust leaks common with expanded-end kits\u003c\/li\u003e\n\u003cli\u003eRetains the factory exhaust heat shields on 2018 and newer GT models without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eInstalls between the factory catalytic converters and factory mufflers\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually all aftermarket axle-back exhaust kits\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this X-pipe from T-304 stainless steel tubing. According to the manufacturer, it will not develop the surface rust typical of 409 stainless steel. It also will not rust completely through the way aluminized mild steel pipes can. That matters for a component mounted low under the car, where it is exposed to moisture, road salt, and heat cycling.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent at a 2.5-inch diameter, so the pipe keeps a consistent cross-section through each bend. Instead of expanded slip-fit ends, the X-pipe uses flush-fit band clamps. Steeda says this approach prevents the exhaust leaks common with expanded-end kits. The same clamps also allow the pipe to be trimmed to a shorter length when needed.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe X-shaped crossover merges the two exhaust banks through a smooth transition. Steeda states this produces a stronger scavenging effect than a traditional H-pipe, which supports added power at high RPM. The manufacturer rates the design at up to 20% better exhaust flow than the factory resonator and H-pipe layouts. It also lists gains of up to 8 hp and 9.5 lb-ft of torque with no tune required.\u003c\/p\u003e\u003cp\u003eDeleting the resonators gives the Coyote V8 a more aggressive, race-inspired exhaust tone. The swap also removes up to 7 lb from the exhaust system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts between the factory catalytic converters and the factory mufflers\u003c\/li\u003e\n\u003cli\u003eCutting of the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the X-pipe to be shortened to suit the installation\u003c\/li\u003e\n\u003cli\u003eOn 2018 and newer GT models, the factory heat shields can stay in place without modifying the X-pipe or the shields\u003c\/li\u003e\n\u003cli\u003eNo tune is required after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory resonators for a more aggressive exhaust tone on a Coyote-powered Mustang\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated gains of up to 8 hp and 9.5 lb-ft without a tune\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel resists the surface rust seen on 409 stainless and the rust-through seen on aluminized steel\u003c\/li\u003e\n\u003cli\u003eRemoves up to 7 lb from the exhaust system\u003c\/li\u003e\n\u003cli\u003eKeeps the 2018 and newer factory heat shields without cutting or chiseling\u003c\/li\u003e\n\u003cli\u003eWorks with virtually all aftermarket axle-back systems, so it fits into a staged exhaust build\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT \/ Mach 1 \/ Dark Horse \/ Bullitt\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304692150457,"sku":"SDA-555-3618","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3618_P04.jpg?v=1794436009"},{"product_id":"steeda-304-stainless-resonator-delete-h-x-pipe-2015-2026-mustang-gt-555-3625","title":"Steeda 304 Stainless Resonator Delete H\/X-Pipe (2015-2026 Mustang GT) - 555-3625","description":"\u003cp\u003eThe Steeda 555-3625 is a resonator delete mid-pipe built from 304 stainless steel for the 5.0L Coyote-powered S550 and S650 Mustang. It replaces the factory resonator section with a hybrid H\/X layout, which Steeda also calls a Hex Pipe. A smooth transition and crossover are intended to combine the characteristics of an H-pipe and an X-pipe in one assembly. The tubing is 2.5 inch mandrel-bent, the overall length is 32 inches, and Steeda builds it in the USA to a patent-pending design.\u003c\/p\u003e\n\u003cp\u003eThe part is aimed at owners who want a more aggressive, race-inspired exhaust note and less weight without retuning the car. Steeda states that it removes up to 6 pounds and does not require a tune. It fits in the mid-pipe position, after the stock catalytic converters and before the stock mufflers, and works with virtually all aftermarket axle-back systems. Unlike many competing resonator deletes, it keeps the factory heat shields on 2018 and newer GT models with no cutting or modification of the shields. It suits GT, Bullitt, Mach 1, and Dark Horse owners building a lighter, louder exhaust in stages.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eU.S.-sourced T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli\u003e2.5 inch diameter mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eHybrid H\/X (Hex Pipe) design with a smooth transition and crossover section\u003c\/li\u003e\n\u003cli\u003ePatent-pending design\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003e32 inch overall length\u003c\/li\u003e\n\u003cli\u003eFlush-fit band clamps allow the pipe to be cut shorter if needed\u003c\/li\u003e\n\u003cli\u003eBand clamps help prevent the exhaust leaks common with expanded-end kits\u003c\/li\u003e\n\u003cli\u003eRetains the factory exhaust heat shields on 2018 and newer GT models\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003cli\u003eRemoves up to 6 lbs compared to the factory setup\u003c\/li\u003e\n\u003cli\u003eAggressive, race-inspired exhaust tone\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually all aftermarket axle-back exhaust kits\u003c\/li\u003e\n\u003cli\u003eSteeda part number 555-3625\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eU.S.-Sourced T-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this H\/X-pipe from T-304 stainless steel tubing sourced in the United States and mandrel-bent to a consistent 2.5 inch diameter. According to the manufacturer, 304 stainless will not develop the surface rust typical of 409 stainless, and it will not corrode through the way aluminized mild steel pipes eventually can. For a component that sits low under the car and takes road spray, salt, and heat cycling, that material choice matters for long-term durability.\u003c\/p\u003e\u003cp\u003eThe pipe connects with flush-fit band clamps instead of expanded slip-fit ends. Steeda notes that this joint style helps prevent the exhaust leaks often seen with expanded-end kits. It also lets you trim the pipe shorter where needed for fitment. The design is patent pending, and the part is manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe core of the design is the hybrid H\/X crossover. A smooth transition between the two banks is meant to deliver the benefits of both an H-pipe and an X-pipe in one part. With the factory resonator gone, the Coyote V8 takes on a noticeably more aggressive, race-inspired tone.\u003c\/p\u003e\u003cp\u003eRemoving the resonator also takes weight out of the car, with Steeda citing a reduction of up to 6 pounds. The pipe requires no tune, so it can be installed without changing the engine calibration.\u003c\/p\u003e\u003cp\u003eOn 2018 and newer GT models, the pipe was engineered to work with the factory heat shields as they are. Many competing resonator deletes require you to cut and expand the pipe to clear the OE shields, or to chisel the shields off. This one avoids both. It is also compatible with virtually all aftermarket axle-back systems, so it pairs easily with an existing or planned rear exhaust upgrade.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts in the mid-pipe location, downstream of the stock catalytic converters and upstream of the stock mufflers\u003c\/li\u003e\n\u003cli\u003eCutting the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market\u003c\/li\u003e\n\u003cli\u003eNo tune is required after installation\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the H\/X-pipe to be cut to a shorter length if needed for fitment\u003c\/li\u003e\n\u003cli\u003eFactory heat shields on 2018 and newer GT models can stay in place without cutting or chiseling\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled at a later date\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives the Coyote V8 a more aggressive, race-inspired exhaust tone by eliminating the factory resonator\u003c\/li\u003e\n\u003cli\u003eTakes up to 6 pounds out of the exhaust system\u003c\/li\u003e\n\u003cli\u003eRequires no tune, so the engine calibration stays as it is\u003c\/li\u003e\n\u003cli\u003eT-304 stainless tubing resists the surface rust of 409 stainless and the rust-through of aluminized steel\u003c\/li\u003e\n\u003cli\u003eKeeps the factory heat shields on 2018 and newer GT models without cutting or removal\u003c\/li\u003e\n\u003cli\u003eWorks with virtually all aftermarket axle-back kits for a staged exhaust build\u003c\/li\u003e\n\u003cli\u003eBand-clamp connections allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT \/ Mach 1 \/ Dark Horse \/ Bullitt\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304696180921,"sku":"SDA-555-3625","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/hex_pipe_8-6-25__15449.1754504883.jpg?v=1794436007"},{"product_id":"roush-2015-2026-ford-mustang-gt-resonator-delete-h-pipe-with-improved-sound-direct-fit","title":"ROUSH 2015-2026 Ford Mustang GT Resonator Delete H-Pipe with Improved Sound (Direct-Fit)","description":"\u003cp\u003eThe ROUSH Resonator Delete H-Pipe is a direct-fit mid-pipe assembly for the 5.0L V8 Mustang GT that removes the factory resonator from the exhaust path. In its place is a 2.5-inch H-pipe formed from mandrel-bent stainless steel. ROUSH engineered it from OEM vehicle CAD data so it lines up with the factory exhaust components. It works with both Ford and ROUSH Active Exhaust Systems.\u003c\/p\u003e\n\u003cp\u003eRemoving the factory resonator, which ROUSH describes as restrictive, gives the exhaust a deeper, more aggressive tone with a race-inspired growl. ROUSH says the H-pipe increases flow through the exhaust system and lowers back pressure. It also states that replacing the resonator with this part will not set a check engine light. For S550 and later Mustang GT owners who want a more assertive V8 sound for street or track use from a single bolt-in mid-pipe change, it is a practical upgrade backed by a 3-year limited warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete design that removes the factory resonator from the exhaust system\u003c\/li\u003e\n\u003cli\u003eH-pipe configuration with 2.5-inch tubing\u003c\/li\u003e\n\u003cli\u003eConstructed from corrosion-resistant, high-grade stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent flow and reduced back pressure\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered using OEM vehicle CAD data for accurate fitment\u003c\/li\u003e\n\u003cli\u003eDirect-fit design\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford and ROUSH Active Exhaust Systems\u003c\/li\u003e\n\u003cli\u003ePer ROUSH, replacing the factory resonator with this H-pipe will not trigger a check engine light\u003c\/li\u003e\n\u003cli\u003eProduces a deeper, more aggressive, race-inspired exhaust tone\u003c\/li\u003e\n\u003cli\u003eSuitable for street and track use\u003c\/li\u003e\n\u003cli\u003eBacked by a ROUSH 3-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 2.5-Inch Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eROUSH builds the H-pipe assembly from high-grade stainless steel chosen for corrosion resistance and long service life. That matters for a component that sits low under the car and is exposed to heat, moisture, and road debris.\u003c\/p\u003e\u003cp\u003eThe 2.5-inch tubing is mandrel-bent, so the pipe keeps a consistent diameter through each bend instead of crimping or flattening. ROUSH developed the assembly from OEM vehicle CAD data so it fits the factory exhaust mounting points and connections.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonator changes the character of the 5.0L V8 exhaust note. ROUSH describes the result as a deep, aggressive, race-inspired growl. Because the part is compatible with Ford and ROUSH Active Exhaust Systems, cars with active exhaust can keep using that feature after the swap.\u003c\/p\u003e\u003cp\u003eWith the resonator gone and mandrel-bent tubing in place, ROUSH says the H-pipe increases exhaust flow and reduces back pressure, which it links to improved horsepower and torque. ROUSH does not publish specific gain figures. The manufacturer also states that the change will not trigger a check engine light.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eROUSH describes installation as quick and simple.\u003c\/li\u003e\n\u003cli\u003eDirect-fit design engineered from OEM vehicle CAD data to match the factory exhaust layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a deeper, more aggressive V8 exhaust tone than the factory resonator allows.\u003c\/li\u003e\n\u003cli\u003eYour car has a Ford or ROUSH Active Exhaust System and you want a mid-pipe that stays compatible with it.\u003c\/li\u003e\n\u003cli\u003eYou prefer stainless steel construction for corrosion resistance and durability.\u003c\/li\u003e\n\u003cli\u003eYou want mandrel-bent tubing that keeps flow consistent and reduces back pressure.\u003c\/li\u003e\n\u003cli\u003eYou want a resonator delete that, per ROUSH, will not set a check engine light.\u003c\/li\u003e\n\u003cli\u003eYou want a manufacturer-backed part covered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\n\u003cli\u003e2015-2019 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eROUSH 3-year limited warranty\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68304696574137,"sku":"RSH422119","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c3d2b7c28f4e68e53a0cba3a279889dd.jpg?v=1794782234"},{"product_id":"corsa-2015-2026-ford-mustang-gt-dark-horse-5-0l-double-helixx-x-pipe-with-stainless-steel-construction-3-diameter","title":"CORSA 2015-2026 Ford Mustang GT\/Dark Horse 5.0L Double Helixx X-Pipe with Stainless Steel Construction (3\" Diameter)","description":"\u003cp\u003eThe CORSA Double Helixx X-Pipe is a 3-inch stainless steel mid-pipe for the 5.0L V8 Mustang GT and Dark Horse. It replaces the factory crossover section between the headers and the rear of the exhaust. Its double X-pipe layout is meant to raise exhaust volume and add character without the cruise drone that many owners want to avoid. Corsa Performance designs, engineers, and manufactures the part in Berea, Ohio, and engineers it specifically for the vehicles it is listed for.\u003c\/p\u003e\n\u003cp\u003eFor owners who already run an axle-back system, CORSA says this X-pipe moves the exhaust up one step on its sound scale. The result is a more pronounced rumble at idle and a more aggressive tone under acceleration, while staying quiet during steady-state cruising. The manufacturer rates the design at a 23.43 percent flow increase. It installs with bolts only, no welding, and comes with the hardware and instructions needed to complete the job.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble Helixx double X-pipe configuration\u003c\/li\u003e\n\u003cli\u003e3.0-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated flow increase of +23.43% (actual results not guaranteed and may vary)\u003c\/li\u003e\n\u003cli\u003eRaises sound by one CORSA sound level when paired with an axle-back exhaust system\u003c\/li\u003e\n\u003cli\u003eDistinct rumble at idle and aggressive sound through the gears\u003c\/li\u003e\n\u003cli\u003eEngineered for no drone during cruise\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eAll hardware and detailed instructions included\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in Berea, Ohio\u003c\/li\u003e\n\u003cli\u003eBacked by a CORSA Limited Lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e3-Inch Stainless Steel Double X-Pipe Construction\u003c\/h3\u003e\u003cp\u003eCORSA builds this X-pipe from premium stainless steel. The material is chosen to hold up over time in performance, sound, and appearance. The tubing is 3.0 inches in diameter throughout the double X-pipe design.\u003c\/p\u003e\u003cp\u003eThe design, engineering, and manufacturing all take place at CORSA's facility in Berea, Ohio. CORSA says each system is engineered around the specific characteristics of the vehicle it is built for, to achieve accurate fitment and the intended performance. For that reason, CORSA does not recommend or recognize installation on vehicles other than those specified.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe main purpose of the Double Helixx X-Pipe is to change the sound. Installed with an axle-back system, CORSA states it raises output by one sound level. Owners can expect a distinct rumble at idle and a more aggressive note as the car pulls through the gears. CORSA also says the system is engineered to avoid drone at cruising speed, which matters on a daily-driven or highway-driven Mustang.\u003c\/p\u003e\u003cp\u003eCORSA rates the X-pipe at a 23.43 percent increase in exhaust flow. The manufacturer notes that actual performance results are not guaranteed and may vary.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo welding needed\u003c\/li\u003e\n\u003cli\u003eAll required hardware is included\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions are included\u003c\/li\u003e\n\u003cli\u003eCORSA does not recommend or recognize installation on vehicles other than those the part is specified for\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds one step of exhaust volume to an existing axle-back setup without changing the rear section\u003c\/li\u003e\n\u003cli\u003eDelivers a stronger idle rumble and a more aggressive tone under acceleration\u003c\/li\u003e\n\u003cli\u003eEngineered to stay drone-free at cruise, which suits regular street and highway driving\u003c\/li\u003e\n\u003cli\u003eManufacturer-rated 23.43 percent flow increase over the stated baseline\u003c\/li\u003e\n\u003cli\u003eStainless steel construction intended for long-term durability and appearance\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment with included hardware and instructions, no welding required\u003c\/li\u003e\n\u003cli\u003eCovered by a CORSA Limited Lifetime warranty for as long as you own the vehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang Dark Horse \/ GT (5.0L), Fastback\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L), Convertible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCORSA Limited Lifetime warranty, valid for as long as you own the vehicle, with proof of purchase.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68304704372921,"sku":"COR14327","price":747.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/14327-2015-2019-ford-mustang-gt-3-0-double-helixx-x-pipe-14327-x-pipe-744519663632.jpg?v=1794374984"},{"product_id":"corsa-performance-14347-double-helixx-stainless-steel-3-0-x-pipe-2015-2020-5-2l-shelby-gt350","title":"Corsa Performance 14347 Double Helixx Stainless Steel 3.0\" X-Pipe (2015-2020 5.2L Shelby GT350)","description":"\u003cp\u003eThe Corsa Performance 14347 Double Helixx is a 3.0 inch stainless steel X-pipe that replaces the factory mid-pipe section on the 5.2L V8 Ford Mustang Shelby GT350. Its double X-pipe layout merges the exhaust from both cylinder banks, and Corsa engineered it specifically for this vehicle to achieve proper fitment and performance.\u003c\/p\u003e\n\u003cp\u003eThis part is for GT350 owners who want a much louder exhaust. Corsa places it in the Sport to Xtreme sound range, with a pronounced idle note and a harder edge as you accelerate through each gear. The company says it should remain drone-free at cruising speed. Corsa states a 23.43 percent flow increase. The kit bolts in without welding, includes hardware and detailed instructions, and is designed, engineered, and manufactured in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorsa Performance part number 14347, Double Helixx design\u003c\/li\u003e\n\u003cli\u003e3.0 inch double X-pipe configuration\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated flow increase of +23.43 percent (Corsa notes actual results are not guaranteed and may vary)\u003c\/li\u003e\n\u003cli\u003eSport to Xtreme sound level rating with a significant increase in exhaust volume\u003c\/li\u003e\n\u003cli\u003ePronounced rumble at idle and an aggressive tone as you accelerate through the gears\u003c\/li\u003e\n\u003cli\u003eCorsa states no drone during cruise and credits its patented RSC Technology\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the 5.2L V8 Mustang GT350\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered, and manufactured in Berea, Ohio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePremium Stainless Steel Construction, Built in Berea, Ohio\u003c\/h3\u003e\u003cp\u003eCorsa builds its exhaust systems from premium stainless steel so that performance, sound, and appearance hold up over time. The 14347 X-pipe follows that standard and uses 3.0 inch tubing in a double X-pipe arrangement.\u003c\/p\u003e\u003cp\u003eCorsa designs, engineers, and manufactures the part at its facility in Berea, Ohio. The company engineers each system around the specific characteristics of its target vehicle to get correct fitment and performance. For that reason, Corsa does not recommend or recognize installation on vehicles other than the ones the part was designed for.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCorsa rates this X-pipe from Sport to Xtreme on its sound scale and describes the increase in volume as significant. Expect a pronounced rumble at idle and an aggressive note as the engine works through each gear.\u003c\/p\u003e\u003cp\u003eCorsa says its patented RSC Technology produces an aggressive tone under acceleration and keeps the cabin free of drone while cruising. According to the manufacturer, every system is engineered for its specific vehicle to avoid drone at cruise.\u003c\/p\u003e\u003cp\u003eCorsa states a flow increase of +23.43 percent for this X-pipe. The manufacturer notes that actual performance results are not guaranteed and may vary.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003cli\u003eNo welding required\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware and detailed instructions are supplied with the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a substantially louder GT350 exhaust, rated Sport to Xtreme by Corsa, with a stronger idle note and more aggression under acceleration\u003c\/li\u003e\n\u003cli\u003eYou want more volume without cruising drone, which Corsa attributes to its RSC Technology\u003c\/li\u003e\n\u003cli\u003eCorsa states a 23.43 percent flow increase over the factory section\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment with no welding means you can install it at home with the included hardware and instructions\u003c\/li\u003e\n\u003cli\u003eThe stainless steel construction is intended to keep its performance, sound, and appearance over the long term\u003c\/li\u003e\n\u003cli\u003eIt is engineered specifically for the 5.2L GT350 rather than adapted from a universal design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2016-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCorsa Performance 14347 Double Helixx 3.0 inch X-pipe\u003c\/li\u003e\n\u003cli\u003eAll installation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCorsa covers its branded exhaust systems with a Limited Lifetime warranty. Coverage lasts for the duration of your ownership of the vehicle, and proof of purchase is required.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68304904061113,"sku":"COR14347","price":800.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/14347-ford-mustang-gt-350-5-2l-v8-double-helixx-3-0-x-pipe-14347-x-pipe-745116991504.jpg?v=1794375632"},{"product_id":"borla-2015-2023-ford-mustang-gt-switchfire-x-pipe-with-active-valve-technology-2-5","title":"Borla 2015-2023 Ford Mustang GT SwitchFire X-Pipe with Active Valve Technology (2.5\")","description":"\u003cp\u003eThe Borla SwitchFire X-Pipe, part number 60662, is a mid-pipe replacement for 2015-2023 Ford Mustang GT models powered by the 5.0L V8. It is designed to take the place of the factory resonator only, which lets you change the character of the exhaust without replacing the entire system. The product is listed with a 2.5-inch pipe size and incorporates Borla's SwitchFire technology, which the product title associates with active valve technology.\u003c\/p\u003e\n\u003cp\u003eThis part suits Coyote-powered S550 owners who want to replace the stock resonator section with an X-pipe crossover from an established exhaust manufacturer. Borla positions its exhaust products around its signature 'Sound of Power' tone and motorsport-inspired styling. The listing covers both automatic and manual transmission cars in the rear-wheel-drive, two-door Mustang GT.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla part number 60662\u003c\/li\u003e\n\u003cli\u003eX-pipe mid-pipe design that replaces the O.E. resonator only\u003c\/li\u003e\n\u003cli\u003eIncorporates Borla SwitchFire technology, described in the product title as active valve technology\u003c\/li\u003e\n\u003cli\u003e2.5-inch pipe size per the product title\u003c\/li\u003e\n\u003cli\u003eOutlets are angled slightly outward\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 33.2 in. long x 7.1 in. wide x 5.5 in. high\u003c\/li\u003e\n\u003cli\u003eListed for 5.0L V8 Mustang GT with automatic or manual transmission, rear-wheel drive, 2-door\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBorla SwitchFire X-Pipe Design\u003c\/h3\u003e\u003cp\u003eThe SwitchFire X-Pipe measures 33.2 inches in length, 7.1 inches in width, and 5.5 inches in height, and is built as a direct stand-in for the factory resonator section. Its outlets are angled slightly outward rather than running straight back.\u003c\/p\u003e\u003cp\u003eBorla Performance Industries specializes in stainless steel performance exhaust. The company started out building exhaust systems for concours-level classics such as Rolls-Royce and Ferrari, and it now produces systems for modern street, off-road, and racing vehicles.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBorla markets its exhaust products around its recognizable 'Sound of Power' tone. The manufacturer states that upgrading to a Borla exhaust can bring more power and torque, better fuel economy, longer engine life, and refined motorsport styling. It does not publish specific figures for this X-pipe.\u003c\/p\u003e\u003cp\u003eRemoving the factory resonator in favor of an X-pipe crossover changes how the exhaust sounds. On this part, Borla pairs that layout with its SwitchFire technology.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned to replace the O.E. resonator only; the rest of the exhaust system is retained\u003c\/li\u003e\n\u003cli\u003eListed as compatible with both automatic and manual transmission Mustang GT models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces only the factory resonator, so you can change the exhaust character without swapping the full system\u003c\/li\u003e\n\u003cli\u003eUses Borla's SwitchFire technology in an X-pipe layout made specifically for the 2015-2023 Mustang GT\u003c\/li\u003e\n\u003cli\u003ePublished dimensions of 33.2 x 7.1 x 5.5 inches make it easier to plan clearances before installation\u003c\/li\u003e\n\u003cli\u003eMade by a long-established manufacturer focused on stainless steel performance exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2023 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68304905076921,"sku":"BOR60662","price":597.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60662-main-1-xlarge.jpg?v=1794430540"},{"product_id":"roush-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-improved-sound-direct-fit","title":"ROUSH 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with Improved Sound (Direct-Fit)","description":"\u003cp\u003eThe ROUSH Resonator Delete X-Pipe is a direct-fit mid-pipe for the 5.0L Coyote V8 Mustang GT. It replaces the factory resonator section with a 2.5-inch stainless steel X-pipe, removing the resonators from the exhaust path and merging the two banks through an X-style crossover. ROUSH designs the assembly to cut back pressure, improve exhaust flow, and give the car a more aggressive, race-inspired exhaust note than the stock setup.\u003c\/p\u003e\n\u003cp\u003eThis is a practical upgrade for Mustang GT owners who want more sound and better flow without changing the rest of their exhaust system. ROUSH engineered the part from OEM vehicle CAD data for an accurate fit. It works with both Ford and ROUSH active exhaust systems, installs without vehicle modifications, ships with the necessary hardware, and is backed by a ROUSH limited warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEliminates the factory resonators for a more aggressive, growling exhaust tone\u003c\/li\u003e\n\u003cli\u003eX-pipe design increases exhaust flow and reduces back pressure\u003c\/li\u003e\n\u003cli\u003e2.5-inch X-pipe assembly\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent flow through the bends\u003c\/li\u003e\n\u003cli\u003eHigh-grade stainless steel construction for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered using OEM vehicle CAD data for an accurate fit\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford factory active exhaust and ROUSH active exhaust systems\u003c\/li\u003e\n\u003cli\u003eFits both fastback and convertible 5.0L V8 Mustang GT models\u003c\/li\u003e\n\u003cli\u003e12-pound weight reduction compared to the stock assembly, as stated by ROUSH\u003c\/li\u003e\n\u003cli\u003eDirect-fit installation with no vehicle modifications required\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary hardware\u003c\/li\u003e\n\u003cli\u003eROUSH 3-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eROUSH builds the Resonator Delete X-Pipe from high-grade stainless steel. The material was chosen for long-term durability and corrosion resistance, two qualities that matter for a component mounted low under the car where it is exposed to road debris, moisture, and repeated heat cycles.\u003c\/p\u003e\u003cp\u003eThe 2.5-inch tubing is mandrel bent, so the pipe keeps a consistent inside diameter through each bend instead of crimping or flattening. ROUSH developed the assembly from OEM vehicle CAD data, which lets it bolt in at the factory mounting locations as a true direct-fit part.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonators changes the character of the Coyote V8's exhaust note. ROUSH describes the result as a racecar-like growl, with a more aggressive sound than the stock system produces.\u003c\/p\u003e\u003cp\u003eThe X-pipe merges the two exhaust banks and, with the mandrel-bent tubing, reduces back pressure and improves flow through the system. ROUSH states this improves horsepower, torque, and overall performance, but does not publish specific gain figures. The part also works with Ford's factory active exhaust, so owners with active valves can keep that function after installation.\u003c\/p\u003e\u003cp\u003eROUSH lists a 12-pound weight reduction compared to the stock assembly.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit design; ROUSH describes installation as quick and easy\u003c\/li\u003e\n\u003cli\u003eNo vehicle modifications required\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware is included\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford and ROUSH active exhaust systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonators for a noticeably more aggressive exhaust sound\u003c\/li\u003e\n\u003cli\u003eReduces back pressure and improves exhaust flow through the mid-pipe section\u003c\/li\u003e\n\u003cli\u003eMandrel-bent stainless steel tubing for consistent flow and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eEngineered from OEM CAD data for a direct fit with no modifications\u003c\/li\u003e\n\u003cli\u003eRetains compatibility with Ford factory active exhaust and ROUSH active exhaust systems\u003c\/li\u003e\n\u003cli\u003eReduces weight compared to the stock assembly\u003c\/li\u003e\n\u003cli\u003eCovered by a ROUSH 3-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eROUSH Resonator Delete X-Pipe assembly\u003c\/li\u003e\n\u003cli\u003eAll necessary installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eROUSH 3-Year Limited Warranty\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68304937517241,"sku":"RSH422046","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/rsh-422046_1_big.jpg?v=1794436044"},{"product_id":"kooks-2015-2026-ford-mustang-5-0l-v8-oem-resonator-delete-h-pipe-kit-11513500","title":"Kooks 2015-2026 Ford Mustang 5.0L V8 OEM Resonator Delete H-Pipe Kit - 11513500","description":"\u003cp\u003eThe Kooks 11513500 is an H-pipe resonator delete kit for the 5.0L V8 Mustang. It takes the place of the factory resonator in the mid-pipe section of the exhaust. The kit is listed in a 2-1\/4\" x 3\" x 2-1\/2\" configuration and is built to mate with the stock exhaust components on both ends: the OEM headers at the front and the OEM exhaust at the rear.\u003c\/p\u003e\n\u003cp\u003eThis part suits owners of 2015 and later 5.0L Mustangs who want to remove the factory resonator without replacing the rest of the exhaust. It fits between factory parts, and Kooks supplies the midpipe adapters and clamps needed to install it. Kooks says the part is handcrafted in the USA by a family-owned company with a long history in headers and exhaust systems.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH-pipe resonator delete design that replaces the factory resonator\u003c\/li\u003e\n\u003cli\u003eListed configuration: 2-1\/4\" x 3\" x 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eIncludes a 2-1\/4\" x 3\" H-pipe\u003c\/li\u003e\n\u003cli\u003eMidpipe adapters included\u003c\/li\u003e\n\u003cli\u003eClamps necessary for installation included\u003c\/li\u003e\n\u003cli\u003eConnects to OEM headers and OEM exhaust\u003c\/li\u003e\n\u003cli\u003eDesigned for 2015-2026 Mustang 5.0L V8 applications\u003c\/li\u003e\n\u003cli\u003eKooks part number 11513500\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandcrafted in the USA by Kooks\u003c\/h3\u003e\u003cp\u003eKooks states that all of its products are handcrafted in the USA. The company describes itself as family owned and independently operated, now under a third generation of family leadership. It traces its history in headers and exhaust back to 1962.\u003c\/p\u003e\u003cp\u003eThe manufacturer says it has won championships and set records across many racing organizations, including NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, and SCCA. Kooks reports that its Statesville, North Carolina facility opened in July 2009 and covers 45,000 square feet on more than 11 acres of property.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory resonator in the mid-pipe section\u003c\/li\u003e\n\u003cli\u003eConnects to the OEM headers and the OEM exhaust\u003c\/li\u003e\n\u003cli\u003eMidpipe adapters and the clamps necessary for installation are included in the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator from the 5.0L Mustang exhaust and puts a Kooks H-pipe in its place\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the stock headers and stock rear exhaust, so the rest of the system can stay in place\u003c\/li\u003e\n\u003cli\u003eComes with the midpipe adapters and clamps needed for installation\u003c\/li\u003e\n\u003cli\u003eBuilt by an American manufacturer that handcrafts its headers and exhaust products in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang (5.0L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-1\/4\" x 3\" H-Pipe\u003c\/li\u003e\n\u003cli\u003eMidpipe adapters\u003c\/li\u003e\n\u003cli\u003eClamps necessary for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68305044766905,"sku":"KSH11513500","price":347.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/2168a90554aec4f78bbb56c508780471_6d92ea9f-a0a6-406c-9e22-3933154ad236.png?v=1794376848"},{"product_id":"corsa-performance-3-stainless-double-hh-pipe-2015-2020-5-2l-shelby-gt350-21084","title":"Corsa Performance 3\" Stainless Double HH-Pipe (2015-2020 5.2L Shelby GT350) - 21084","description":"\u003cp\u003eThe Corsa Performance 21084 is a 3-inch stainless steel Double HH-Pipe built for the 5.2L V8 in the 2015-2020 Shelby GT350. It mounts in the mid-pipe position of the exhaust system and is designed to be paired with the rest of the exhaust as part of a complete Corsa setup. It gives GT350 owners a way to change how the Voodoo V8 sounds and breathes without cutting or welding.\u003c\/p\u003e\n\u003cp\u003eThe goal is a more aggressive exhaust note under acceleration and a pronounced rumble at idle, while avoiding drone at cruising speed. Corsa estimates a 23.43% increase in flow, and the pipe bolts in with the supplied hardware and instructions. For owners who already run a Corsa axle-back, or plan to, this HH-Pipe adds sound and flow through the middle of the system without sacrificing highway comfort.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch Double HH-Pipe configuration for the mid-pipe section of the exhaust\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction\u003c\/li\u003e\n\u003cli\u003eCorsa part number 21084\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the 2015-2020 Shelby GT350 5.2L V8\u003c\/li\u003e\n\u003cli\u003eEstimated 23.43% increase in exhaust flow (manufacturer estimate; actual results may vary)\u003c\/li\u003e\n\u003cli\u003eAggressive exhaust note through the gears with a distinct rumble at idle\u003c\/li\u003e\n\u003cli\u003eDesigned to produce no drone at cruising speed\u003c\/li\u003e\n\u003cli\u003eRaises sound output by one level when paired with Corsa axle-back exhaust systems\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eIncludes the necessary hardware and detailed instructions\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered and manufactured by Corsa in Berea, Ohio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePremium Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds this HH-Pipe from premium stainless steel, which the company selects for its performance, appearance and contribution to the exhaust's sound. The 3-inch tubing is laid out in a Double HH configuration and sized for the GT350's 5.2L V8.\u003c\/p\u003e\u003cp\u003eEvery part of the product is designed, engineered and manufactured in Corsa's facility in Berea, Ohio. Corsa builds each of its exhaust products for specific vehicles to ensure correct fitment and performance, and it does not recommend or support using them on vehicles other than those listed.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCorsa tuned this HH-Pipe to give the GT350 an aggressive, high-performance note through each gear and a distinct rumble at idle. It is also designed to avoid drone at cruising speed, so the extra volume comes without the cabin noise that tends to wear on you during long highway drives.\u003c\/p\u003e\u003cp\u003eIf you run a Corsa axle-back system, adding this HH-Pipe steps the sound up by one level over the axle-back alone. Corsa also estimates a 23.43% increase in exhaust flow compared to the stock configuration, though actual results may vary.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eThe manufacturer describes installation as fast and easy\u003c\/li\u003e\n\u003cli\u003eNecessary hardware and detailed instructions are included with the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a more aggressive sound and a stronger idle rumble to the GT350's 5.2L V8\u003c\/li\u003e\n\u003cli\u003eDesigned to avoid drone at cruising speed for comfortable highway driving\u003c\/li\u003e\n\u003cli\u003eTakes a Corsa axle-back system up one sound level\u003c\/li\u003e\n\u003cli\u003eEstimated 23.43% flow increase through the mid-pipe section\u003c\/li\u003e\n\u003cli\u003eBolts in without welding, using the hardware and instructions in the box\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction, backed by Corsa's limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch stainless steel Double HH-Pipe\u003c\/li\u003e\n\u003cli\u003eNecessary installation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCorsa limited lifetime warranty, valid with proof of purchase for as long as you own the vehicle. The exhaust must be installed on the specified vehicle for the warranty to remain valid.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305053810873,"sku":"COR21084","price":674.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/hh_pipe.jpg?v=1794436062"},{"product_id":"mbrp-2-5-inch-h-pipe-resonator-bypass-t409-2015-2026-ford-mustang-s7283409","title":"MBRP 2.5-Inch H-Pipe Resonator Bypass T409. (2015-2026 Ford Mustang) - S7283409","description":"\u003cp\u003eThe MBRP S7283409 is a 2.5-inch H-pipe that takes the place of the factory resonated mid-pipe section on 2015-2026 Ford Mustang models. It is part of MBRP's ARMOR PLUS Series and is built from T409 stainless steel. It removes the resonators from the exhaust path and adds an H-style crossover between the two banks, with mandrel bent tubing used throughout to keep flow smooth.\u003c\/p\u003e\n\u003cp\u003eThis part suits Mustang owners who want a sharper exhaust tone and a less restrictive mid-pipe without moving to a full system. MBRP pairs the T409 construction with a lifetime warranty, and clamps are included for installation. The manufacturer also positions its exhaust products as a base for other bolt-on upgrades such as cold air intakes and programmers.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.5-inch tubing diameter\u003c\/li\u003e\n\u003cli\u003eH-pipe layout with resonator bypass design\u003c\/li\u003e\n\u003cli\u003eT409 stainless steel construction\u003c\/li\u003e\n\u003cli\u003ePart of the MBRP ARMOR PLUS Series\u003c\/li\u003e\n\u003cli\u003eMandrel bent tubing with no rippling in the bends\u003c\/li\u003e\n\u003cli\u003eLaser cut MBRP logo\u003c\/li\u003e\n\u003cli\u003eImproved exhaust tone compared to the resonated setup\u003c\/li\u003e\n\u003cli\u003eClamps included\u003c\/li\u003e\n\u003cli\u003eDeveloped with testing on MBRP's in-house Mustang 1100 AWD-SE chassis dynamometer, plus road and track mileage\u003c\/li\u003e\n\u003cli\u003eMBRP part number S7283409\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT409 Stainless Steel ARMOR PLUS Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds its ARMOR PLUS Series components from T409 stainless steel. The company describes this as a value-oriented, corrosion-resistant material that holds up against penetrating rust, and notes that the tubing is easy to keep clean. MBRP says T409 is well suited to drivers who don't see much precipitation or road salt.\u003c\/p\u003e\u003cp\u003eMBRP is clear about the limits of T409. Winter conditions, heavy salt air, and road treatments can speed up corrosion. The manufacturer's warranty does not cover that kind of corrosion unless the part or system fails completely. Owners in harsh winter climates should keep this in mind.\u003c\/p\u003e\u003cp\u003eEvery tube is mandrel bent, so the bends keep a consistent diameter without the rippling or crimping that can restrict flow. The pipe carries a laser cut MBRP logo.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMandrel bending keeps the full tube diameter through each bend, which MBRP says lets exhaust leave the engine more efficiently. The manufacturer links better exhaust flow to more fresh air reaching the cylinders, which supports power output, performance, and engine longevity. MBRP does not publish specific horsepower or torque figures for this part.\u003c\/p\u003e\u003cp\u003eRemoving the resonators and adding an H-pipe crossover changes the exhaust note. MBRP describes the result as an improved exhaust tone. The company says its exhaust products are developed through dyno sessions on its in-house Mustang 1100 AWD-SE chassis dynamometer and through road and track testing, with an emphasis on minimal bend angles to clear exhaust quickly.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonators for a more pronounced exhaust tone\u003c\/li\u003e\n\u003cli\u003eAdds an H-pipe crossover in a 2.5-inch tube diameter\u003c\/li\u003e\n\u003cli\u003eMandrel bent tubing supports smooth exhaust flow through the mid-pipe\u003c\/li\u003e\n\u003cli\u003eT409 stainless steel resists penetrating rust in moderate climates\u003c\/li\u003e\n\u003cli\u003eComes with the clamps needed to connect it\u003c\/li\u003e\n\u003cli\u003eBacked by MBRP's lifetime warranty, subject to the corrosion exclusions stated by the manufacturer\u003c\/li\u003e\n\u003cli\u003eWorks as a foundation for other bolt-on upgrades such as intakes and tuners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.5-inch T409 stainless steel H-pipe resonator bypass\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP backs ARMOR PLUS Series exhaust components with a lifetime warranty. Corrosion that is accelerated by winter conditions, heavy salt air, or road treatments is not covered unless the part or system fails completely.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305171644601,"sku":"MBRPS7283409","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_c100574e-8250-415e-8227-d94ddacb060c.webp?v=1794435521"},{"product_id":"steeda-304-stainless-resonator-delete-h-pipe-2015-2020-shelby-gt350-555-3621","title":"Steeda 304 Stainless Resonator Delete H-Pipe (2015-2020 Shelby GT350) - 555-3621","description":"\u003cp\u003eThe Steeda 555-3621 is a resonator delete H-pipe built for the Shelby GT350 and its 5.2L flat-plane crank Voodoo V8. It takes the place of the section of factory exhaust that sits downstream of the catalytic converters and ahead of the axle-back, removing the stock resonators and substituting an H-style crossover made from T304 stainless steel. Steeda's goal with this part is to move the GT350's exhaust note away from the sharper character of the factory and aftermarket X-pipe layouts and toward a deeper, more traditional muscle car tone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Steeda states a gain of up to +6 hp and 4 lb-ft of torque. The manufacturer does not specify the test conditions for these figures.\u003c\/p\u003e\n\u003cp\u003eFor GT350 owners who want a different sound, somewhat better exhaust flow, and a little more low-end response, this H-pipe offers a simple clamp-on approach. Steeda states that it requires no tune and no welding, and because it is secured with clamps, the factory resonator can be reinstalled later if you decide to return the car to its original configuration. The stainless construction draws on design and manufacturing methods from Steeda's established GT X-pipe and H-pipe line.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete H-pipe designed for the 5.2L flat-plane crank Voodoo V8 in the Shelby GT350\u003c\/li\u003e\n\u003cli\u003eMade from T304 stainless steel\u003c\/li\u003e\n\u003cli\u003e30.75 in. overall length\u003c\/li\u003e\n\u003cli\u003eBand clamps let the pipe be cut down to a shorter length\u003c\/li\u003e\n\u003cli\u003eInstalls without welding, using a pair of flush-fit exhaust clamps\u003c\/li\u003e\n\u003cli\u003eNo tune required, according to Steeda\u003c\/li\u003e\n\u003cli\u003eRemoves the factory resonators to reduce exhaust restriction and weight\u003c\/li\u003e\n\u003cli\u003eReplaces the exhaust section between the catalytic converters and the axle-back\u003c\/li\u003e\n\u003cli\u003eIntended to improve low-end torque compared with the factory resonator\u003c\/li\u003e\n\u003cli\u003eAllows a return to the factory resonator using the supplied clamps\u003c\/li\u003e\n\u003cli\u003eIncorporates design and manufacturing elements from Steeda's GT X-pipe and H-pipe products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this H-pipe from T304 stainless steel, a material chosen for its resistance to rust and corrosion over the long term. Steeda positions it as a clear step up from exhaust components made of T409 stainless or aluminized steel, which can corrode and eventually develop holes as they age.\u003c\/p\u003e\u003cp\u003eOwners should expect that heat from the exhaust can cause the 304 stainless to discolor over time. This is a cosmetic change only and does not affect the pipe's resistance to rusting through. The part also benefits from construction and design approaches Steeda carried over from its GT-series X-pipes and H-pipes, with the intent that it will hold up for as long as you own the car.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound is the main reason to choose this part. Steeda describes the H-pipe layout as giving the GT350 a lower, heavier rumble at idle and a more aggressive growl under acceleration. By comparison, the manufacturer characterizes both the stock and aftermarket X-pipe setups on this car as producing a thinner, raspier note. With the resonators removed, overall exhaust volume also goes up slightly.\u003c\/p\u003e\u003cp\u003eBeyond the sound, deleting the resonators lets exhaust gases leave the Voodoo engine with less restriction and takes some weight out of the system. H-pipe designs are generally associated with gains in low-end power and torque, whereas X-pipes tend to favor higher rpm performance. Steeda presents this H-pipe as a way to add some low-end response to the GT350 compared with the factory resonator.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNo welding is required; the H-pipe is held in position by two flush-fit exhaust clamps\u003c\/li\u003e\n\u003cli\u003eRemoving the factory resonator requires taking off the heat shield and cutting the exhaust\u003c\/li\u003e\n\u003cli\u003eThe band clamps allow the H-pipe to be trimmed to a shorter length if needed\u003c\/li\u003e\n\u003cli\u003eNo tune is required, according to Steeda\u003c\/li\u003e\n\u003cli\u003eThe included exhaust clamps can be used to put the factory resonator back on if you want to return to stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the GT350 to have a deeper, more traditional muscle car exhaust tone in place of the raspier X-pipe character\u003c\/li\u003e\n\u003cli\u003eYou want to add some low-end torque compared with the factory resonator\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction resists the rust and corrosion that can affect T409 or aluminized steel exhausts\u003c\/li\u003e\n\u003cli\u003eClamp-on installation without welding and with no tune required keeps the project simple\u003c\/li\u003e\n\u003cli\u003eThe modification can be reversed, since the factory resonator can be refitted using the included clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2020 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSteeda T304 stainless steel resonator delete H-pipe\u003c\/li\u003e\n\u003cli\u003eExhaust clamps (pair of flush-fit clamps)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68305202577593,"sku":"SDA-555-3621","price":304.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3621-v2-1__59737.1681300020_1.jpg?v=1794436072"},{"product_id":"borla-connection-pipes-switchfire-tm-x-pipe-2018-2023-mustang-gt-60715","title":"Borla Connection Pipes - Switchfire(Tm) X-Pipe (2018-2023 Mustang GT) - 60715","description":"\u003cp\u003eThe Borla SwitchFire X-Pipe, part number 60715, is a stainless steel connection pipe that Borla offers as an optional upgrade for use with its cat-back exhaust systems on the 2018-2023 Ford Mustang GT. It replaces the factory connection piping ahead of the cat-back with an X-style crossover. Borla states this design improves exhaust scavenging and produces a more balanced exhaust note.\u003c\/p\u003e\n\u003cp\u003eThe pipe is built from T304 stainless steel with mandrel-bent 2.75-inch tubing and is described as a bolt-on fit. Borla also lists it for 2020 and newer Mustang Shelby GT500 models when used with the Shelby\/Borla cat-back, part number SPP-130810. For owners who already run or plan to run a Borla cat-back, it adds an X-pipe crossover to the system without a custom-fabricated mid-section.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla SwitchFire X-Pipe, part number 60715\u003c\/li\u003e\n\u003cli\u003eOptional upgrade designed for use with a Borla cat-back exhaust system\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover design for improved exhaust scavenging and a balanced sound profile\u003c\/li\u003e\n\u003cli\u003e2.75-inch pipe diameter\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent internal diameter through the bends\u003c\/li\u003e\n\u003cli\u003ePrecision-engineered bolt-on fitment\u003c\/li\u003e\n\u003cli\u003eAlso listed for 2020+ Shelby GT500 when paired with Shelby\/Borla cat-back SPP-130810\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eBorla builds the SwitchFire X-Pipe from T304 stainless steel, an alloy chosen for its durability in exhaust applications. The tubing is mandrel-bent, which keeps the pipe from narrowing or kinking through the bends and preserves its full 2.75-inch diameter along the length of the piping.\u003c\/p\u003e\u003cp\u003eBorla describes the pipe as precision-engineered for a proper fit, so it is intended to install with the existing mounting points rather than requiring cutting or welding.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe X-shaped crossover joins the two exhaust banks so that pulses from one side help draw exhaust out of the other. Borla credits this with better exhaust scavenging and a more balanced sound. The mandrel-bent tubing is intended to support efficient exhaust flow.\u003c\/p\u003e\u003cp\u003eAccording to the listing, the exhaust produces a deep, rumbling note at idle that becomes a more aggressive growl under acceleration and a strong roar at full throttle. The listing also states the setup is tuned to avoid noticeable cabin drone. Final sound will depend on the Borla cat-back the X-pipe is paired with.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDescribed by the manufacturer as a bolt-on fit\u003c\/li\u003e\n\u003cli\u003eIntended for use with a Borla cat-back exhaust system\u003c\/li\u003e\n\u003cli\u003e2020+ Shelby GT500 applications require the Shelby\/Borla cat-back, part number SPP-130810\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds an X-pipe crossover to a Borla cat-back for improved scavenging and a more balanced exhaust note\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel and mandrel-bent 2.75-inch tubing provide durable construction with efficient flow\u003c\/li\u003e\n\u003cli\u003eBolt-on design avoids the need for a custom-fabricated mid-pipe\u003c\/li\u003e\n\u003cli\u003eEngineered by Borla to work with its own cat-back systems, including the Shelby\/Borla SPP-130810 on the GT500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT \/ GT500\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305435361465,"sku":"BOR60715","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60715-main-1-xlarge.jpg?v=1794430355"},{"product_id":"borla-2015-2026-ford-mustang-gt-x-pipe-with-mid-pipes-for-maximum-flow-60705","title":"Borla 2015-2026 Ford Mustang GT X-Pipe with Mid-Pipes for Maximum Flow (60705)","description":"\u003cp\u003eThe Borla 60705 is an X-pipe with integrated mid-pipes for the S550-generation Ford Mustang GT with the 5.0L V8. It replaces the factory crossover and connecting pipes between the exhaust manifolds and the rear section of the exhaust. Borla positions this part for maximum flow and offers it in a single configuration for both manual and automatic transmission cars.\u003c\/p\u003e\n\u003cp\u003eThe 60705 works on Mustang GT fastbacks and convertibles whether or not they have the factory Active Valve Performance Exhaust, so one part covers most rear-wheel-drive 5.0L GT builds from this era. Borla is known for stainless steel performance exhaust and its signature sound. This X-pipe suits owners who want to upgrade the middle of the exhaust system from a manufacturer with a long history of exhaust engineering.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe crossover combined with mid-pipes in one assembly\u003c\/li\u003e\n\u003cli\u003eBorla part number 60705\u003c\/li\u003e\n\u003cli\u003eDescribed by Borla as designed for maximum flow\u003c\/li\u003e\n\u003cli\u003eCompatible with vehicles with or without Active Valve Performance Exhaust\u003c\/li\u003e\n\u003cli\u003eSuitable for both automatic and manual transmission Mustang GT models\u003c\/li\u003e\n\u003cli\u003eIntended for rear-wheel-drive 5.0L V8 Mustang GT coupes and convertibles\u003c\/li\u003e\n\u003cli\u003eManufactured by Borla, a specialist in stainless steel performance exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBorla Exhaust Engineering\u003c\/h3\u003e\u003cp\u003eBorla Performance Industries designs and manufactures stainless steel performance exhaust. The company started by building exhaust systems for concours-level classics such as Rolls-Royce and Ferrari. It later expanded into exhaust for modern performance vehicles used on the street, off-road, and in racing.\u003c\/p\u003e\u003cp\u003eThe 60705 combines the X-pipe crossover and the mid-pipes in one unit. That makes it a complete replacement for the middle section of the Mustang GT exhaust rather than a single crossover component.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eAn X-pipe joins the left and right exhaust banks at a central crossover point. Borla describes the 60705 as built for maximum flow. The manufacturer also says its exhaust products deliver the distinctive Borla Sound of Power along with gains in power and torque, but it gives no specific figures for this part.\u003c\/p\u003e\u003cp\u003eBecause it works with or without the factory Active Valve Performance Exhaust, the 60705 can go on valved and non-valved Mustang GTs alike.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory mid-section with an X-pipe and mid-pipe assembly that Borla describes as built for maximum flow\u003c\/li\u003e\n\u003cli\u003eOne part number covers Mustang GTs with or without Active Valve Performance Exhaust\u003c\/li\u003e\n\u003cli\u003eWorks with both manual and automatic transmission cars\u003c\/li\u003e\n\u003cli\u003eComes from a manufacturer that specializes in performance exhaust and is known for its signature exhaust tone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2023 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305436573881,"sku":"BOR60705","price":589.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60705-main-1-xlarge.jpg?v=1794430359"},{"product_id":"ford-performance-2015-2018-ford-mustang-gt-x-pipe-with-high-flow-design-50-state-legal","title":"Ford Performance 2015-2018 Ford Mustang GT X-Pipe with High-Flow Design (50-State Legal)","description":"\u003cp\u003eThis Ford Performance X-Pipe replaces the resonator section of the factory mid-pipe on the Mustang GT with an X crossover. It is a cut-and-clamp design built from 2.75 inch mandrel-bent T-409 stainless steel tubing, and it works with the factory catalytic converters already on the car.\u003c\/p\u003e\n\u003cp\u003eFord's stock catalytic converters work well, but the factory resonator mid-pipe leaves room for improvement. The X crossover balances exhaust gas pressure between the two banks. The result is better flow and a louder, raspier exhaust note with a race-car character. For owners of Coyote 5.0L DOHC V8-powered Mustang GTs, it is a straightforward way to change the sound and flow of the exhaust while keeping the factory converters in place.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConverts the factory resonator mid-pipe into an X-pipe configuration\u003c\/li\u003e\n\u003cli\u003eX crossover design that balances exhaust gas pressure across the system\u003c\/li\u003e\n\u003cli\u003eImproved exhaust flow and a loud, raspy, race-car-style exhaust note\u003c\/li\u003e\n\u003cli\u003e2.75 inch diameter mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eT-409 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eCut-and-clamp installation that reuses the stock clamps\u003c\/li\u003e\n\u003cli\u003eRetains the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT models with the Coyote 5.0L DOHC V8 engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T-409 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe X-Pipe is made from 2.75 inch diameter T-409 stainless steel tubing. Ford Performance specifies this material for durability in the exhaust system.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which keeps the pipe at its full diameter through each bend. This supports the free-flowing design and avoids the restrictions that crimped bends can create.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe factory resonator mid-pipe is the main area this part addresses. Swapping the resonator for an X crossover balances exhaust gas pressure between the two sides of the system, which Ford Performance states improves exhaust flow and adds power.\u003c\/p\u003e\u003cp\u003eThe modern X crossover also changes the character of the exhaust. The result is a loud, raspy growl in the manner of a race car, noticeably more aggressive than the stock resonator setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation uses a cut-and-clamp method: the factory mid-pipe resonator section is cut out and removed.\u003c\/li\u003e\n\u003cli\u003eThe X-Pipe clamps into place using the stock clamps.\u003c\/li\u003e\n\u003cli\u003eThe factory catalytic converters are reused and stay in the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator section, which Ford Performance identifies as the area of the stock mid-pipe that can be improved\u003c\/li\u003e\n\u003cli\u003eAdds a louder, raspier exhaust tone through the X crossover design\u003c\/li\u003e\n\u003cli\u003eKeeps the factory catalytic converters, so you do not need to buy replacement converters\u003c\/li\u003e\n\u003cli\u003eBuilt from 2.75 inch mandrel-bent T-409 stainless steel tubing for durability\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the Coyote 5.0L DOHC V8 Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2018 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68305437524153,"sku":"FRPM-5251-M8","price":299.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M-5251-M8_3.jpg?v=1794436094"},{"product_id":"mbrp-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-t-409-construction-2-5-diameter","title":"MBRP 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with T-409 Construction (2.5\" Diameter)","description":"\u003cp\u003eThe MBRP XP Series Resonator Delete X-Pipe is a mid-pipe section for the 5.0L Mustang GT and Bullitt. It takes the place of the factory resonator assembly in the exhaust system and works with the original catalytic converters, which remain in place. It covers both the S550 and S650 generations, so owners of either platform can use the same part to change how their exhaust sounds.\u003c\/p\u003e\n\u003cp\u003eThe factory resonator is there to quiet the exhaust, and MBRP notes that it also adds restriction and weight. Removing it lets more of the Coyote V8's sound come through. The X-pipe crossover balances pressure between the left and right banks, which MBRP says helps horsepower and gives a deeper, fuller tone. The pipe is made from 409 stainless steel with 2-1\/2 inch mandrel-bent tubing and bolts into place using clamps. It suits owners who want a more aggressive exhaust note without removing their catalytic converters.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart of the MBRP XP Series\u003c\/li\u003e\n\u003cli\u003eResonator delete design that replaces the factory resonator\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover that balances exhaust pressure between the two banks\u003c\/li\u003e\n\u003cli\u003eMade from T-409 (409) stainless steel for corrosion resistance\u003c\/li\u003e\n\u003cli\u003e2-1\/2 inch (2.5 inch) diameter mandrel-bent piping\u003c\/li\u003e\n\u003cli\u003eReuses the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eBolt-in installation using clamps\u003c\/li\u003e\n\u003cli\u003eLighter than the factory resonator assembly, according to MBRP\u003c\/li\u003e\n\u003cli\u003eDesigned for S550 and S650 Mustang GT and Bullitt models with the 5.0L engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e409 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds this X-pipe from 409 stainless steel, also listed as T-409, which is chosen for long-term corrosion resistance. That matters for a part mounted under the car, where it is exposed to road spray, moisture, and heat cycling.\u003c\/p\u003e\u003cp\u003eThe 2-1\/2 inch tubing is mandrel bent, so the pipe keeps a consistent inside diameter through each bend instead of narrowing where it is crimped. MBRP specifies this to help flow move efficiently through the system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith the factory resonator removed, more of the 5.0L V8's exhaust note reaches the tailpipes. MBRP says the stock resonator keeps the S550 and S650 quiet and restricts flow. Deleting it is meant to make the engine's sound and character more noticeable from the driver's seat.\u003c\/p\u003e\u003cp\u003eThe X-pipe junction lets exhaust pulses from each cylinder bank cross over and balance pressure between the two pipes. MBRP credits this with improving horsepower and giving a deeper, more powerful tone. The manufacturer does not publish specific power figures.\u003c\/p\u003e\u003cp\u003eMBRP describes the part as lightweight compared with the heavier factory resonator it replaces.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-in design that installs with clamps\u003c\/li\u003e\n\u003cli\u003eUses the factory catalytic converters, which stay in place\u003c\/li\u003e\n\u003cli\u003eMBRP describes installation as fast and easy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator to bring out more of the 5.0L V8's exhaust sound\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover balances pressure between banks for a deeper tone\u003c\/li\u003e\n\u003cli\u003e409 stainless steel resists corrosion for long-term use under the car\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2-1\/2 inch tubing supports efficient exhaust flow\u003c\/li\u003e\n\u003cli\u003eKeeps the factory catalytic converters in the system\u003c\/li\u003e\n\u003cli\u003eBolt-in, clamp-on installation with no permanent changes to the factory converters\u003c\/li\u003e\n\u003cli\u003eCovered by MBRP's lifetime warranty against defects in materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang Bullitt \/ GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP lifetime warranty covering defects in materials and workmanship.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305438474425,"sku":"MBRPS7213409","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_f16569c0-98a5-434e-89af-d45f10a43081.webp?v=1794435533"},{"product_id":"roush-y-pipe-2015-2026-mustang-2-3l-ecoboost-422091","title":"Roush Y-Pipe (2015-2026 Mustang 2.3L EcoBoost) - 422091","description":"\u003cp\u003eThe Roush Resonator Delete Y-Pipe, part number 422091, is a 2.5-inch mid-pipe assembly for the four-cylinder 2.3L EcoBoost Mustang. It takes the place of the factory resonator section, so exhaust gases pass through a mandrel-bent 304 stainless steel Y-pipe instead of the stock resonator. Roush designed the part using OEM vehicle CAD data so that it lines up with the factory exhaust layout.\u003c\/p\u003e\n\u003cp\u003eThe part serves two purposes. It lowers back pressure and improves exhaust flow, which Roush says supports horsepower, torque, and overall performance. It also removes the resonator, which gives a deeper and more aggressive exhaust note. For EcoBoost owners who want a stronger sound and a more open exhaust path without replacing the whole system, this Y-pipe is a direct way to make that change. It is made from corrosion-resistant stainless steel and comes with the hardware needed to install it.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoush part number 422091\u003c\/li\u003e\n\u003cli\u003eDeletes the factory resonator for a deeper, more aggressive exhaust tone\u003c\/li\u003e\n\u003cli\u003e2.5-inch Y-pipe assembly\u003c\/li\u003e\n\u003cli\u003eBuilt from high-grade 304 stainless steel for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent flow\u003c\/li\u003e\n\u003cli\u003eDesigned to reduce back pressure and improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eEngineered using OEM vehicle CAD data for proper fitment\u003c\/li\u003e\n\u003cli\u003eManufacturer states an approximate 12-pound weight reduction compared with the stock assembly\u003c\/li\u003e\n\u003cli\u003eManufacturer states it fits both fastback and convertible 2.3L EcoBoost Mustangs\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eRoush makes the 422091 Y-pipe from high-grade 304 stainless steel. This alloy resists corrosion and holds up to the heat cycling and road exposure an exhaust system faces underneath the car.\u003c\/p\u003e\u003cp\u003eEvery bend in the Y-pipe is mandrel formed. This keeps the inside diameter of the 2.5-inch tubing consistent through each turn instead of letting it crimp or flatten, which helps maintain steady flow and limits restriction. Roush developed the assembly from OEM vehicle CAD data so that it matches the factory mounting points and connections.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonator changes the character of the EcoBoost exhaust note. Roush describes the result as a deep, aggressive, race-inspired sound compared with the stock setup.\u003c\/p\u003e\u003cp\u003eThe Y-pipe is designed to cut back pressure and improve flow through the four-cylinder exhaust system, which Roush says supports horsepower and torque. The manufacturer does not publish specific power figures. Roush also states an approximate 12-pound weight reduction compared with the stock assembly.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoush describes installation as quick and simple.\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware is included with the Y-pipe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDeletes the factory resonator for a more aggressive exhaust sound on the 2.3L EcoBoost\u003c\/li\u003e\n\u003cli\u003e2.5-inch mandrel-bent tubing reduces back pressure and keeps flow consistent\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction resists corrosion over the long term\u003c\/li\u003e\n\u003cli\u003eOEM CAD-based design supports proper fitment with the factory exhaust\u003c\/li\u003e\n\u003cli\u003eApproximate 12-pound weight reduction stated by the manufacturer\u003c\/li\u003e\n\u003cli\u003eComes with the hardware required for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang EcoBoost (2.3L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRoush 2.5-inch 304 stainless steel Y-pipe assembly\u003c\/li\u003e\n\u003cli\u003eAll necessary installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68305440145593,"sku":"RSH422091","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/fb84cad4508fe95e9d6b59d995a091e1.jpg?v=1794782251"},{"product_id":"mbrp-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-2-5-aluminum-construction-s7213al","title":"MBRP 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with 2.5\" Aluminum Construction (S7213AL)","description":"\u003cp\u003eThe MBRP S7213AL is a resonator delete X-pipe from MBRP's Installer Series, built for S550 and S650 Mustang GT and Bullitt owners who want a more open exhaust note without paying for a stainless steel system. It takes the place of the heavy factory resonator assembly in the mid-section of the exhaust and uses 2-1\/2 inch mandrel-bent aluminized steel tubing joined by an X-pipe crossover.\u003c\/p\u003e\n\u003cp\u003eMBRP describes the factory resonator as both quiet and restrictive, muting the sound of the 5.0L V8. Removing it and adding an X-pipe crossover is meant to produce a deeper, more aggressive tone while improving flow. The design keeps your factory catalytic converters in place, and the bolt-in, clamp-together layout suits enthusiasts who handle their own exhaust work. MBRP backs the part with a lifetime warranty against manufacturing defects.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMBRP Installer Series resonator delete, part number S7213AL\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover that MBRP says balances pressure between the left and right exhaust banks\u003c\/li\u003e\n\u003cli\u003e2-1\/2 inch mandrel-bent tubing for more efficient exhaust flow\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eLightweight replacement for the heavy factory resonator\u003c\/li\u003e\n\u003cli\u003eRetains the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eBolt-in design that installs with clamps\u003c\/li\u003e\n\u003cli\u003eIntended for S550 and S650 Mustangs with the 5.0L V8\u003c\/li\u003e\n\u003cli\u003eMBRP lifetime warranty covering defects in materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAluminized Steel, 2-1\/2 Inch Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eThe S7213AL is part of MBRP's Installer Series, a line positioned as a lower-cost alternative to stainless steel kits while targeting comparable performance. The tubing is aluminized steel, which MBRP specifies for long-term corrosion resistance.\u003c\/p\u003e\u003cp\u003eThe piping is 2-1\/2 inch diameter and mandrel bent, so the tube keeps a consistent cross-section through each bend instead of crimping or narrowing. MBRP says this helps the exhaust flow more efficiently and supports performance.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory resonator removes a component that MBRP calls a source of both sound damping and restriction. The result is a louder, more pronounced exhaust note from the 5.0L V8.\u003c\/p\u003e\u003cp\u003eThe X-pipe crossover lets exhaust pulses from each bank interact and equalize pressure between the two pipes. MBRP credits this design with improving horsepower and producing a deeper, more powerful tone. The manufacturer does not publish specific gain figures.\u003c\/p\u003e\u003cp\u003eSwapping the heavy stock resonator for this lighter pipe assembly also cuts some weight from the exhaust system, though MBRP does not state an exact figure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-in application that installs with clamps\u003c\/li\u003e\n\u003cli\u003eReplaces the factory resonator assembly\u003c\/li\u003e\n\u003cli\u003eReuses the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eMBRP describes installation as fast and easy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator, which MBRP identifies as a restriction that mutes the 5.0L V8\u003c\/li\u003e\n\u003cli\u003eAdds an X-pipe crossover for a deeper exhaust tone and balanced pressure between banks\u003c\/li\u003e\n\u003cli\u003eUses 2-1\/2 inch mandrel-bent tubing for more efficient flow\u003c\/li\u003e\n\u003cli\u003eAluminized steel offers corrosion resistance at a lower cost than stainless steel kits\u003c\/li\u003e\n\u003cli\u003eKeeps the factory catalytic converters in place\u003c\/li\u003e\n\u003cli\u003eBolt-in, clamp-together design suits home installation\u003c\/li\u003e\n\u003cli\u003eCovered by MBRP's lifetime warranty against defects in materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang Bullitt \/ GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP lifetime warranty covering defects in materials and workmanship.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305440309433,"sku":"MBRPS7213AL","price":184.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_88779bc7-d8d7-42bc-99fb-2178561da5d6.webp?v=1794435536"},{"product_id":"jba-2015-2020-mustang-eco-boost-after-cat-mid-pipe-2015-2020-mustang-1748sd","title":"JBA 2015-2020 Mustang Eco Boost After Cat Mid Pipe (2015-2020 Mustang) - 1748SD","description":"\u003cp\u003eThe JBA 1748SD is an after-cat mid pipe for the 2015-2020 Ford Mustang EcoBoost. As the name indicates, it mounts downstream of the catalytic converter and links the forward exhaust components to the rest of the system. It is intended for owners who are replacing factory exhaust plumbing with aftermarket tubing on the turbocharged four-cylinder S550.\u003c\/p\u003e\n\u003cp\u003eJBA says its exhaust products aim to deliver power, sound, and quality, and that its general approach is to replace restrictive factory exhaust with free-flowing, mandrel-bent stainless tubing. For EcoBoost owners building a JBA-based exhaust, or swapping out the stock mid-section, the 1748SD is the brand's part for that section of the system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJBA part number 1748SD\u003c\/li\u003e\n\u003cli\u003eAfter-cat mid pipe design, positioned downstream of the catalytic converter\u003c\/li\u003e\n\u003cli\u003eMade for the 2015-2020 Mustang EcoBoost\u003c\/li\u003e\n\u003cli\u003eJBA describes its exhaust systems as using free-flowing, mandrel-bent stainless tubing in place of restrictive factory exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent Stainless Tubing\u003c\/h3\u003e\u003cp\u003eJBA's stated construction method for its exhaust systems is mandrel-bent stainless steel tubing. Mandrel bending keeps the tubing at a consistent diameter through each bend, which supports the free-flowing design JBA uses to replace restrictive factory exhaust components.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eJBA says its exhaust development focuses on power, sound, and efficiency. The company also states that its systems are tuned for a strong exhaust tone that does not become overwhelming inside the cabin. As a mid pipe, the 1748SD makes up one section of the exhaust path, so the final sound and performance depend on the other components installed with it.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory piping behind the catalytic converter on a 2015-2020 Mustang EcoBoost with a JBA aftermarket section\u003c\/li\u003e\n\u003cli\u003eUses the free-flowing, mandrel-bent stainless tubing approach JBA applies to its exhaust systems\u003c\/li\u003e\n\u003cli\u003eLets you complete or extend a JBA exhaust setup with a part from the same brand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2020 Ford Mustang EcoBoost\u003c\/li\u003e\u003c\/ul\u003e","brand":"JBA","offers":[{"title":"Default Title","offer_id":68305561878713,"sku":"JBA1748SD","price":150.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/be5bdac774d92b0b7a58f448b7d96ada_1.jpg?v=1794436104"},{"product_id":"borla-t304-ss-h-pipe-2015-2026-ford-mustang-gt-2024-dark-horse-60752","title":"Borla T304 SS H-Pipe (2015-2026 Ford Mustang GT \/ 2024+ Dark Horse) - 60752","description":"\u003cp\u003eThe Borla 60752 is a T-304 stainless steel H-pipe built to take the place of the factory resonator on the 5.0L V8 Mustang. It fits in the mid-pipe section of the stock exhaust and adds a balance tube between the left and right banks. The pipe removes the OE resonator and joins the two sides of the exhaust in its place. It works with both automatic and manual transmission cars.\u003c\/p\u003e\n\u003cp\u003eBorla says the H-pipe evens out the exhaust pulses from each bank to improve performance and gives a sound that a crossover pipe of this type is known for. It is made from T-304 stainless with mandrel-bent tubing and CNC-controlled manufacturing for consistent fitment. It suits owners of Coyote-powered GT, Mach 1, and Dark Horse models who want a more aggressive exhaust note and a durable stainless replacement for the resonator. You can run it on its own or add other Borla components later.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the Original Equipment (O.E.) resonator only\u003c\/li\u003e\n\u003cli\u003eH-pipe design with a crossover balance tube that blends combustion pulses from both banks\u003c\/li\u003e\n\u003cli\u003eConstructed from T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth, unrestricted flow\u003c\/li\u003e\n\u003cli\u003ePrecision CNC manufacturing for accurate fitment\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 33.2 in. long x 7.1 in. wide x 4.2 in. high\u003c\/li\u003e\n\u003cli\u003eInlets: 2.25 in. O.D.\u003c\/li\u003e\n\u003cli\u003ePipes: 2.75 in. O.D.\u003c\/li\u003e\n\u003cli\u003eOutlets: 2.5 in. I.D., angled slightly outward\u003c\/li\u003e\n\u003cli\u003eBorla logo laser etched on the balance tube\u003c\/li\u003e\n\u003cli\u003eCompatible with automatic and manual transmission vehicles\u003c\/li\u003e\n\u003cli\u003eCan be installed alone or combined with other Borla parts\u003c\/li\u003e\n\u003cli\u003eIncludes two 2.5 in. clamps\u003c\/li\u003e\n\u003cli\u003eBacked by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this H-pipe from T-304 stainless steel. The manufacturer positions this alloy above T-400 series stainless such as 409 for both performance and durability.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, so the pipe keeps its full diameter through each bend instead of crimping or narrowing. Borla credits this with maximizing flow and power. CNC-controlled manufacturing keeps the dimensions consistent and helps the assembly line up accurately with the factory exhaust. The Borla logo is laser etched on the balance tube.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe crossover tube connects the left and right exhaust banks so the combustion pulses from each side of the V8 can merge. Borla states this produces improved performance.\u003c\/p\u003e\u003cp\u003eOn sound, Borla describes an aggressive, custom tone that it says only an H-pipe system can produce. Because the part removes the factory resonator, expect a change in the exhaust character compared with stock.\u003c\/p\u003e\u003cp\u003eThe outlets are 2.5 in. I.D. and angle slightly outward. The pipe can serve as a standalone upgrade or as one piece of a larger Borla exhaust setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces only the Original Equipment (O.E.) resonator\u003c\/li\u003e\n\u003cli\u003eInstallation requires cutting the O.E. exhaust\u003c\/li\u003e\n\u003cli\u003eCan be installed by itself or combined with other Borla exhaust components\u003c\/li\u003e\n\u003cli\u003eTwo 2.5 in. clamps are included for connecting the outlets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator and adds an H-pipe crossover for a more aggressive exhaust tone\u003c\/li\u003e\n\u003cli\u003eBlends exhaust pulses between banks, which Borla states improves performance\u003c\/li\u003e\n\u003cli\u003eT-304 stainless construction for long-term corrosion resistance and durability\u003c\/li\u003e\n\u003cli\u003eMandrel bends preserve tube diameter for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing for accurate fit with the factory exhaust\u003c\/li\u003e\n\u003cli\u003eWorks as a standalone upgrade or as part of a larger Borla system\u003c\/li\u003e\n\u003cli\u003eCovered by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2025 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2021-2023 Ford Mustang Mach 1\u003c\/li\u003e\n\u003cli\u003e2024-2025 Ford Mustang Dark Horse (5.0L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla T-304 stainless steel H-pipe assembly\u003c\/li\u003e\n\u003cli\u003e2 x 2.5 in. clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305578885305,"sku":"BOR60752","price":356.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60752-main-1-xlarge.jpg?v=1794430380"},{"product_id":"kooks-3-x-2-3-4-ss-off-road-race-only-x-pipe-2015-2019-shelby-gt350-retains-oem-mufflers-11543100","title":"Kooks 3\" x 2-3\/4\" SS Off-Road Race Only X-Pipe. 2015-2019 Shelby GT350. Retains OEM Mufflers. - 11543100","description":"\u003cp\u003eThe Kooks 11543100 is a stainless steel off-road X-pipe built for the 2015-2019 Shelby GT350. It is sized at 3 in x 2-3\/4 in and is designed to connect a Kooks header system to the car's factory rear exhaust. Its OEM-style outlet lets you keep the stock mufflers in place.\u003c\/p\u003e\n\u003cp\u003eThis X-pipe is a race-only component. It does not include catalytic converters, and it is intended for owners who are already running, or planning to run, Kooks headers on a track-focused GT350. Because the original mufflers stay in place, it suits builders who want to change the front half of the exhaust while keeping the factory rear section.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel X-pipe construction\u003c\/li\u003e\n\u003cli\u003e3 in x 2-3\/4 in sizing\u003c\/li\u003e\n\u003cli\u003eOEM outlet that mates to the stock exhaust\u003c\/li\u003e\n\u003cli\u003eRetains the factory mufflers\u003c\/li\u003e\n\u003cli\u003eOff-road design with no catalytic converters\u003c\/li\u003e\n\u003cli\u003eMust be paired with Kooks headers\u003c\/li\u003e\n\u003cli\u003eFactory exhaust must be cut during installation\u003c\/li\u003e\n\u003cli\u003eKooks part number 11543100\u003c\/li\u003e\n\u003cli\u003eNot legal for sale, installation, or use on licensed vehicles in California; not CARB compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Off-Road X-Pipe Construction\u003c\/h3\u003e\u003cp\u003eKooks builds this X-pipe from stainless steel. It uses 3 in tubing on the header side and an OEM outlet, listed as 2-3\/4 in, that connects to the factory GT350 exhaust. This allows the rest of the stock system, including the original mufflers, to remain on the car.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThis is a catless, off-road-only design, so it replaces the catalytic converter section of the factory system. It is engineered to work only with Kooks headers. Kooks does not publish horsepower, torque, or sound figures for this part.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe factory exhaust must be cut to fit this X-pipe\u003c\/li\u003e\n\u003cli\u003eKooks headers are required; this X-pipe is designed specifically to work with them\u003c\/li\u003e\n\u003cli\u003eThe OEM outlet connects to the stock exhaust, and the factory mufflers are retained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou are running Kooks headers on a GT350 and need a matching X-pipe to connect them to the factory exhaust\u003c\/li\u003e\n\u003cli\u003eYou want to keep the stock mufflers while replacing the front section of the exhaust\u003c\/li\u003e\n\u003cli\u003eYou are building a dedicated off-road or race car where a catless X-pipe is permitted\u003c\/li\u003e\n\u003cli\u003eYou want a stainless steel mid-section for the system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2019 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68305683284153,"sku":"KOO-11543100","price":1810.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/cae06c7c49560908480afe91fc3ef732_0a14492f-1a9a-4156-a41a-571f9c6ef988.png?v=1794379361"},{"product_id":"borla-18-25-ford-mustang-gt-replacement-h-pipe","title":"Borla 18-25 Ford Mustang GT Replacement H-Pipe","description":"\u003cp\u003eThe Borla Replacement H-Pipe is a T-304 stainless steel crossover section built for 2018-2025 Mustang GT owners who already run, or plan to run, one of Borla's 3-inch cat-back exhaust systems. It takes the place of the Merge X-Pipe that comes with those systems, swapping the crossover style from an X configuration to an H configuration with a balance tube connecting the two sides.\u003c\/p\u003e\n\u003cp\u003eIt is not a universal mid-pipe. Borla designed it to work only with a specific group of its own 3-inch cat-back systems, in every tip option offered for them. The H-Pipe balances the exhaust pulses from each cylinder bank and gives the system a distinct, aggressive tone that differs from the X-Pipe arrangement. Mandrel-bent tubing, CNC manufacturing for accurate fitment, and Borla's Million-Mile Warranty make it a practical way to change the character of an existing Borla setup without replacing the entire system.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the Merge X-Pipe in select Borla 3-inch cat-back systems\u003c\/li\u003e\n\u003cli\u003eCompatible Borla systems: 140960 through 140965, 140969 and 140970, as well as 140742, 140743, 140745 and 140746, in all tip options\u003c\/li\u003e\n\u003cli\u003eNot intended for use with any other exhaust system\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 21 in. long, 7.4 in. wide, 3 in. high\u003c\/li\u003e\n\u003cli\u003eInlet diameter: 3 in. O.D.\u003c\/li\u003e\n\u003cli\u003ePipe diameter: 3 in. O.D.\u003c\/li\u003e\n\u003cli\u003eOutlet diameter: 3 in. I.D.\u003c\/li\u003e\n\u003cli\u003eH-style crossover with balance tube that blends combustion pulses from both cylinder banks\u003c\/li\u003e\n\u003cli\u003ePremium T-304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth flow\u003c\/li\u003e\n\u003cli\u003eCNC precision manufacturing for accurate fit\u003c\/li\u003e\n\u003cli\u003eLaser-etched Borla logo on the balance tube\u003c\/li\u003e\n\u003cli\u003eIncludes two 2.5 in. clamps\u003c\/li\u003e\n\u003cli\u003eBacked by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this H-Pipe from T-304 stainless steel, a grade the manufacturer positions above T-400 series alloys such as 409 for both performance and durability. Choosing T-304 for an exhaust section that sits under the car and sees heat cycling, road spray, and weather is aimed at long service life.\u003c\/p\u003e\u003cp\u003eThe tubing is formed with mandrel bends, which keep the pipe diameter consistent through each curve rather than allowing it to crimp or flatten. Borla uses CNC manufacturing to hold tight tolerances so the part lines up properly with the compatible cat-back systems. The balance tube carries a laser-etched Borla logo.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe H-Pipe ties the left and right sides of the exhaust together through a balance tube, blending the combustion pulses from both cylinder banks. Borla states this improves performance compared with leaving the banks separate.\u003c\/p\u003e\u003cp\u003eSound is the main reason to choose this part over the Merge X-Pipe. Borla describes the result as an aggressive, custom tone that is unique to H-Pipe exhaust layouts, giving the V8 a different character than the X-Pipe configuration in the same cat-back system.\u003c\/p\u003e\u003cp\u003eWith 3 in. O.D. inlets and tubing, 3 in. I.D. outlets, and mandrel-bent construction, the part is built to maintain flow through the crossover section.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstalls in place of the Merge X-Pipe in the compatible Borla 3-inch cat-back systems only\u003c\/li\u003e\n\u003cli\u003eTwo 2.5 in. clamps are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLets owners of a compatible Borla 3-inch cat-back change the exhaust tone from the X-Pipe sound to an H-Pipe sound without replacing the whole system\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for Borla's own systems, with CNC manufacturing for an accurate fit\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel and mandrel bends for durability and smooth flow\u003c\/li\u003e\n\u003cli\u003eCovered by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2025 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH-Pipe assembly\u003c\/li\u003e\n\u003cli\u003eTwo 2.5 in. clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305685807289,"sku":"BOR60753","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60753-main-1-xlarge.webp?v=1794430384"},{"product_id":"mbrp-s7215409-2015-2021-shelby-gt350-t409-3-resonator-delete-pipe","title":"MBRP S7215409 2015-2021 Shelby GT350 T409 3\" Resonator Delete Pipe","description":"\u003cp\u003eThe MBRP S7215409 is a 3-inch resonator delete pipe built from T409 stainless steel for the Ford Mustang Shelby GT350. It replaces the factory resonators with straight sections of tubing. The goal is to bring out more of the exhaust note from the GT350's engine while keeping the rest of the exhaust layout intact.\u003c\/p\u003e\n\u003cp\u003eFor GT350 owners who want a louder, more pronounced exhaust tone without replacing the entire system, this pipe is a direct approach. It is a bolt-on, no-weld design that mounts to the factory hangers. MBRP builds its T409 XP Series parts to stand up to road salt, rocks, tar, and grime, and backs that series with a lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch diameter tubing\u003c\/li\u003e\n\u003cli\u003eT409 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eSixteen-gauge T409 material, per MBRP's XP Series description\u003c\/li\u003e\n\u003cli\u003eEliminates the factory resonators\u003c\/li\u003e\n\u003cli\u003eIncreases exhaust tone\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing with minimal bend angles, per MBRP\u003c\/li\u003e\n\u003cli\u003eBolt-on design with no welding required\u003c\/li\u003e\n\u003cli\u003eDirect fit to the OEM hangers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSixteen-Gauge T409 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMBRP makes this resonator delete from 3-inch T409 stainless steel. The company describes its XP Series material as sixteen-gauge T409, chosen for drivers whose cars see harsh road conditions. MBRP says it holds up to salt, rocks, tar, and road grime.\u003c\/p\u003e\u003cp\u003eMBRP states that its tubing is fully mandrel bent and uses minimal bend angles, so exhaust gases leave the system quickly. Over time, T409 can develop surface rust. Winter driving and road treatments can speed this up.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonators is meant to increase exhaust tone, giving the GT350 a more noticeable sound. MBRP says it tunes its exhaust products for sound that stays civilized during normal driving and turns aggressive under throttle.\u003c\/p\u003e\u003cp\u003eMBRP reports that it develops its muscle car exhaust products on an in-house Mustang 1100 AWD-SE chassis dynamometer, along with on-road and track testing. The company positions its exhaust components as a foundation for other modifications such as cold air intakes, programmers, and tuners. MBRP does not publish specific horsepower or torque figures for this part.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on design, no welding required\u003c\/li\u003e\n\u003cli\u003eDirect fit to the OEM exhaust hangers\u003c\/li\u003e\n\u003cli\u003eMBRP estimates installation at one and a half to two hours (stated for its systems generally)\u003c\/li\u003e\n\u003cli\u003eMBRP states that the clamps and parts needed for installation are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonators to increase exhaust tone on a GT350\u003c\/li\u003e\n\u003cli\u003e3-inch T409 stainless steel construction for resistance to road salt, debris, and grime\u003c\/li\u003e\n\u003cli\u003eBolt-on, no-weld installation that uses the factory hangers\u003c\/li\u003e\n\u003cli\u003eCovered by MBRP's lifetime warranty on its XP Series (surface rust excluded)\u003c\/li\u003e\n\u003cli\u003eChanges the sound without requiring a full exhaust system replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2018 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eClamps and installation parts (per MBRP; no itemized list provided)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP Lifetime Warranty on its XP Series. Surface rust that develops over time is not covered, and winter road conditions and road treatments may accelerate it.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305690362041,"sku":"MBRPS7215409","price":294.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_77bfa936-9547-4eda-97e5-1e9c5afec3ed.webp?v=1794435547"},{"product_id":"borla-18-25-mustang-gt-24-25-mustang-dark-horse-switchfire-x-pipe","title":"Borla 18-25 Mustang GT \/ 24-25 Mustang Dark Horse SwitchFire X-Pipe","description":"\u003cp\u003eThe Borla SwitchFire X-Pipe is a hydroformed crossover section that takes the place of the Merge X-Pipe in Borla 3-inch Cat-Back systems on the 2018-2025 Mustang GT and the 2024-2025 Mustang Dark Horse. Borla's patented SwitchFire layout does away with the turbulent center intersection found in a standard X-pipe. Instead, it blends the combustion pulses from each cylinder bank, which Borla credits with improved performance, more power, and an aggressive custom exhaust note.\u003c\/p\u003e\n\u003cp\u003eThis part is intended only for owners already running, or planning to run, a Borla 3-inch Cat-Back system on their Coyote-powered GT or Dark Horse. Borla uses hydroforming to give this version a lower profile than its conventional SwitchFire X-Pipe. Construction is T-304 austenitic stainless steel with mandrel bends and CNC precision manufacturing, and Borla backs it with its Million-Mile Warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePatented Borla SwitchFire X-Pipe design that eliminates the turbulent center intersection of a standard X-pipe\u003c\/li\u003e\n\u003cli\u003eBlends combustion pulses from both sides of the engine\u003c\/li\u003e\n\u003cli\u003eHydroformed construction for a lower profile than a conventional SwitchFire X-Pipe\u003c\/li\u003e\n\u003cli\u003eReplaces the Merge X-Pipe in Borla Cat-Back systems\u003c\/li\u003e\n\u003cli\u003eCompatible with Borla 3-inch Cat-Back systems only\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 21.1 inches long x 7.8 inches wide x 5 inches high\u003c\/li\u003e\n\u003cli\u003e2.75-inch O.D. inlet and 3-inch I.D. outlet\u003c\/li\u003e\n\u003cli\u003eT-304 austenitic stainless steel construction\u003c\/li\u003e\n\u003cli\u003eUltra-smooth mandrel bends for flow\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing for accurate fitment\u003c\/li\u003e\n\u003cli\u003eCovered by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHydroformed T-304 Austenitic Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eBorla builds every SwitchFire X-Pipe from T-304 austenitic stainless steel. The company positions this material above T-400 series alternatives such as 409 stainless for both performance and long-term durability.\u003c\/p\u003e\u003cp\u003eHydroforming lets Borla achieve a lower profile on this X-pipe than on its conventional SwitchFire design. Mandrel bending keeps the tube bends smooth, and CNC manufacturing holds the dimensions needed for an accurate fit within the Borla Cat-Back system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eA conventional X-pipe merges both banks at a single center crossing, which creates turbulence. The SwitchFire design removes that intersection and blends the exhaust pulses from each side of the engine. According to Borla, this produces improved performance and power along with an aggressive custom sound.\u003c\/p\u003e\u003cp\u003eThe ultra-smooth mandrel bends are intended to maximize flow and power through the crossover section. Measuring 21.1 inches long, 7.8 inches wide, and 5 inches high, the part moves exhaust from a 2.75-inch O.D. inlet to a 3-inch I.D. outlet.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLets owners of a Borla 3-inch Cat-Back system swap the Merge X-Pipe for the SwitchFire configuration\u003c\/li\u003e\n\u003cli\u003eReplaces the standard center crossover with Borla's patented pulse-blending design, which Borla says improves performance and power\u003c\/li\u003e\n\u003cli\u003eDelivers the aggressive custom sound Borla attributes to the SwitchFire layout\u003c\/li\u003e\n\u003cli\u003eHydroformed shape provides a lower profile than Borla's conventional SwitchFire X-Pipe\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel and Borla's Million-Mile Warranty support long-term ownership\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2018-2025 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2024-2025 Ford Mustang Dark Horse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305704353977,"sku":"BOR60748","price":589.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60748-main-1-xlarge.jpg?v=1794430395"},{"product_id":"mishimoto-2015-2018-ford-mustang-gt-h-pipe-resonator-delete-with-direct-fit-design-stainless-steel","title":"Mishimoto 2015-2018 Ford Mustang GT H-Pipe Resonator Delete with Direct-Fit Design (Stainless Steel)","description":"\u003cp\u003eThe Mishimoto H-Pipe Resonator Delete is a mid-pipe section for the Mustang GT that takes the place of the factory exhaust resonator. It is built entirely from 304 stainless steel with mandrel-bent tubing and TIG-welded joints. The goal is to open up the middle of the exhaust system for better flow and a more pronounced exhaust note.\u003c\/p\u003e\n\u003cp\u003eOwners who want more volume and a sharper tone from their Mustang GT's V8 without replacing the whole system will find this a practical upgrade. It works with both manual and automatic transmission cars, connects to either factory or aftermarket rear mufflers, and is backed by the Mishimoto Lifetime Warranty. Mishimoto suggests pairing it with its Mustang GT axle-back exhaust for the best overall exhaust performance.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete that replaces the factory exhaust resonator with a free-flowing crossover pipe section\u003c\/li\u003e\n\u003cli\u003eFull 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for optimal exhaust flow\u003c\/li\u003e\n\u003cli\u003eTIG-welded construction\u003c\/li\u003e\n\u003cli\u003eCut-and-clamp, clamp-in installation designed for the 2015+ Mustang GT\u003c\/li\u003e\n\u003cli\u003eCompatible with stock or aftermarket rear mufflers\u003c\/li\u003e\n\u003cli\u003eFits both manual and automatic transmission vehicles\u003c\/li\u003e\n\u003cli\u003eAdditional sleeve-style exhaust clamps included for a secure connection\u003c\/li\u003e\n\u003cli\u003eProduces a more aggressive, higher-pitched tone under acceleration\u003c\/li\u003e\n\u003cli\u003eCovered by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMishimoto builds this mid-pipe entirely from 304 stainless steel, which gives it a clean, finished look under the car. All of the tubing is mandrel-bent, so the pipe keeps its diameter through each bend. This helps the exhaust flow freely and avoids the restrictions that crimped bends can create.\u003c\/p\u003e\u003cp\u003eThe joints are TIG welded for a precise, consistent bead. The kit also includes extra sleeve-style exhaust clamps to make a dependable connection to the rest of the exhaust system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory resonator and replacing it with a free-flowing pipe section changes the character of the Mustang GT's exhaust. Mishimoto describes the result as more volume and a more aggressive, higher-pitched tone under acceleration.\u003c\/p\u003e\u003cp\u003eThe mandrel-bent stainless tubing is intended to provide optimal flow through the middle of the system. Because the pipe connects to either factory or aftermarket rear mufflers, you can adjust the final sound through your muffler choice. Mishimoto recommends its Mustang GT axle-back exhaust as a companion piece for maximum performance.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCut-and-clamp design developed specifically for the 2015+ Mustang GT\u003c\/li\u003e\n\u003cli\u003eClamp-in connection to stock or aftermarket rear mufflers using the included sleeve-style exhaust clamps\u003c\/li\u003e\n\u003cli\u003eSuitable for both manual and automatic transmission vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelete the factory resonator to get more exhaust volume and a sharper tone under acceleration\u003c\/li\u003e\n\u003cli\u003e304 stainless steel, mandrel-bent, TIG-welded construction built for durability and appearance\u003c\/li\u003e\n\u003cli\u003eKeep your current rear mufflers or pair the pipe with aftermarket units\u003c\/li\u003e\n\u003cli\u003eWorks with manual and automatic transmission Mustang GT models\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2024 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH-pipe resonator delete section\u003c\/li\u003e\n\u003cli\u003eSleeve-style exhaust clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMishimoto Lifetime Warranty\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68305993990329,"sku":"MISMMEXH-MUS8-15HP","price":339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/MMEXH-MUS8-15HP_1.jpg?v=1794436131"},{"product_id":"stainless-works-2018-2026-ford-mustang-gt-mid-resonator-delete-h-pipe-with-high-flow-design-direct-fit","title":"Stainless Works 2018-2026 Ford Mustang GT Mid-Resonator Delete H-Pipe with High-Flow Design (Direct-Fit)","description":"\u003cp\u003eThe Stainless Works Mid-Resonator Delete H-Pipe is a direct-fit crossover pipe for the 5.0L Mustang GT. It removes the factory middle resonator and puts a performance H-pipe in its place, so the car keeps a balanced crossover between the two banks without the restriction and sound damping of the stock resonator.\u003c\/p\u003e\n\u003cp\u003eStainless Works builds this H-pipe with smooth mandrel bends to keep exhaust flow moving efficiently and full TIG welding at the joints for strength and a clean finished look. It is designed for a clamp-in installation, and the clamps come in the box. That makes it a simple way for GT owners to change the exhaust note and support performance without welding or cutting new pipe, whether the car stays stock or is part of a larger exhaust build.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete that replaces the OEM middle resonator\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover configuration\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for the 5.0L Mustang GT\u003c\/li\u003e\n\u003cli\u003eSmooth mandrel bends to optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eFully TIG welded for strength and appearance\u003c\/li\u003e\n\u003cli\u003eClamp-in installation\u003c\/li\u003e\n\u003cli\u003eClamps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent, Fully TIG-Welded Construction\u003c\/h3\u003e\u003cp\u003eStainless Works forms this H-pipe with mandrel bends. Mandrel bending keeps the pipe's cross-section smooth and consistent through each curve, avoiding the crimped or flattened sections that can restrict flow.\u003c\/p\u003e\u003cp\u003eEvery joint is TIG welded. Stainless Works chose this method for the strength of the welds and for the clean, uniform bead it leaves on the finished part.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory middle resonator removes a component whose job is to quiet the exhaust. With the H-pipe in its place, the car gets a more pronounced exhaust sound, and Stainless Works describes the part as a way to improve both sound and power.\u003c\/p\u003e\u003cp\u003eThe H-pipe crossover links the two exhaust banks. The smooth mandrel bends are intended to help exhaust gases move through the mid-section of the system efficiently.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for a clamp-in installation in place of the OEM middle resonator\u003c\/li\u003e\n\u003cli\u003eDirect-fit design\u003c\/li\u003e\n\u003cli\u003eRequired clamps are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a more noticeable exhaust note from your 5.0L GT without changing the rest of the factory system\u003c\/li\u003e\n\u003cli\u003eYou prefer a clamp-in part that does not require welding to install\u003c\/li\u003e\n\u003cli\u003eYou want a mid-pipe with mandrel bends and full TIG welds instead of the factory resonator section\u003c\/li\u003e\n\u003cli\u003eYou are building the exhaust in stages and want a direct-fit H-pipe to start with or to add later\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete H-pipe\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68306070012089,"sku":"SSWM18RESDH","price":546.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/m18resdh-1-primary.jpg?v=1794436143"},{"product_id":"kooks-3-x-2-3-4-ss-green-catted-x-pipe-2015-2019-shelby-gt350-retains-oem-mufflers-11543300","title":"Kooks 3\" x 2-3\/4\" SS GREEN Catted X-Pipe. 2015-2019 Shelby GT350. Retains OEM Mufflers - 11543300","description":"\u003cp\u003eThe Kooks 11543300 is a stainless steel X-pipe for the Shelby GT350 with integrated Kooks GREEN catalytic converters. It uses a 3-inch inlet and a 2-3\/4-inch outlet sized to the factory connection, so it works with the stock rear exhaust and keeps the OEM mufflers in place. It is designed as part of a Kooks header system and must be paired with Kooks headers.\u003c\/p\u003e\n\u003cp\u003eThis X-pipe suits GT350 owners who are installing or have installed Kooks headers and want to keep catalytic converters in the system. The Kooks Ultra High Performance GREEN converters are EPA certified and 49-state legal. Retaining the factory mufflers lets owners complete a Kooks header and catted mid-section setup without replacing the rest of the exhaust. The part is not legal for sale, installation, or use on licensed vehicles in California and is not CARB compliant.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel X-pipe construction\u003c\/li\u003e\n\u003cli\u003e3-inch inlet by 2-3\/4-inch outlet (per product title)\u003c\/li\u003e\n\u003cli\u003eIntegrated Kooks Ultra High Performance GREEN catalytic converters\u003c\/li\u003e\n\u003cli\u003eConverters are EPA certified and 49-state legal\u003c\/li\u003e\n\u003cli\u003eOEM-style outlet for connection to the stock exhaust\u003c\/li\u003e\n\u003cli\u003eRetains the factory OEM mufflers\u003c\/li\u003e\n\u003cli\u003eDesigned for use with Kooks headers only\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 11543300\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel X-Pipe with GREEN Catalytic Converters\u003c\/h3\u003e\u003cp\u003eKooks builds this X-pipe from stainless steel and integrates its own Ultra High Performance GREEN catalytic converters into the assembly. The converters carry EPA certification and are 49-state legal, so the system keeps emissions control hardware in place.\u003c\/p\u003e\u003cp\u003eThe 3-inch inlets are matched to Kooks headers, and the outlet uses factory sizing to connect to the stock exhaust. This lets the X-pipe slot into the GT350 system ahead of the original mufflers.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe factory exhaust must be cut to install this X-pipe.\u003c\/li\u003e\n\u003cli\u003eMust be used with Kooks headers; it is not intended for use with factory exhaust manifolds or other brands of headers.\u003c\/li\u003e\n\u003cli\u003eThe OEM-style outlet connects to the stock exhaust, and the factory mufflers are retained.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompletes a Kooks header installation on the Shelby GT350 with a matching X-pipe sized for the header outlets.\u003c\/li\u003e\n\u003cli\u003eKeeps catalytic converters in the exhaust using EPA certified, 49-state legal Kooks GREEN converters.\u003c\/li\u003e\n\u003cli\u003eWorks with the factory mufflers and stock rear exhaust, so no additional muffler or cat-back purchase is required.\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for an exhaust component that sits directly behind the headers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2019 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel X-pipe\u003c\/li\u003e\n\u003cli\u003eKooks Ultra High Performance GREEN catalytic converters (integrated)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68306104385721,"sku":"KSH11543300","price":2498.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/cae06c7c49560908480afe91fc3ef732_b6c551db-3fde-41aa-be8b-c25148c73ed8.png?v=1794380915"},{"product_id":"kooks-3-x-2-3-4-ss-catted-x-pipe-2015-2019-shelby-gt350-retains-oem-mufflers-11543200","title":"Kooks 3\" x 2-3\/4\" SS Catted X-Pipe. 2015-2019 Shelby GT350. Retains OEM Mufflers. - 11543200","description":"\u003cp\u003eThe Kooks 11543200 is a stainless steel catted X-pipe built for the 2015-2019 Shelby GT350. It uses 3 inch inlets and steps down to 2-3\/4 inch outlets that match the factory configuration, so it connects to the stock exhaust and keeps the original GT350 mufflers in place. Kooks tuner-style high-flow catalytic converters are built into the assembly.\u003c\/p\u003e\n\u003cp\u003eThis mid-pipe is the link between a set of Kooks headers and the factory rear exhaust. Owners who have installed or are planning Kooks headers get an X-pipe that keeps catalytic converters in the system and retains the stock mufflers, with no change to the rear section beyond what installation requires. It is a model-specific piece meant for GT350 owners finishing a Kooks header installation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKooks part number 11543200\u003c\/li\u003e\n\u003cli\u003eStainless steel X-pipe construction\u003c\/li\u003e\n\u003cli\u003e3 inch inlet diameter stepping to 2-3\/4 inch outlets\u003c\/li\u003e\n\u003cli\u003eKooks high-flow tuner catalytic converters built into the pipe\u003c\/li\u003e\n\u003cli\u003eOutlets sized to the factory exhaust so the stock system can be reused\u003c\/li\u003e\n\u003cli\u003eRetains the original equipment mufflers\u003c\/li\u003e\n\u003cli\u003eDesigned to pair with Kooks headers\u003c\/li\u003e\n\u003cli\u003eSpecific to the 2015-2019 Shelby GT350\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Catted X-Pipe Construction\u003c\/h3\u003e\u003cp\u003eKooks builds this X-pipe from stainless steel, and the catalytic converters are part of the mid-pipe assembly itself, so no separate converter housings are needed. The 3 inch inlet side matches up with Kooks headers, and the outlet end narrows to 2-3\/4 inch to meet the factory exhaust.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe X-pipe layout links the left and right banks between the headers and the rear exhaust. The tuner-grade high-flow converters from Kooks keep catalysts in the system as part of a Kooks header setup. Because the factory mufflers stay on the car, the rear section of the stock GT350 exhaust remains in place.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe factory exhaust has to be cut to fit this X-pipe.\u003c\/li\u003e\n\u003cli\u003eThe X-pipe is designed to work only with Kooks headers and must be paired with them.\u003c\/li\u003e\n\u003cli\u003eThe outlets connect to the stock exhaust, and the original mufflers are reused.\u003c\/li\u003e\n\u003cli\u003eNot legal for sale, installation, or use on any licensed vehicle in California, and does not meet CARB compliance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLinks a Kooks header installation to the factory GT350 exhaust without replacing the mufflers.\u003c\/li\u003e\n\u003cli\u003eKeeps catalytic converters in the system through the built-in Kooks high-flow tuner units.\u003c\/li\u003e\n\u003cli\u003eOutlets sized to the factory pipes let you keep the stock rear exhaust.\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for a mid-pipe that sits directly beneath the car.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2019 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eStainless steel X-pipe with Kooks high-flow tuner catalytic converters built in\u003c\/li\u003e\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68306106974393,"sku":"KSH11543200","price":2039.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/ee47faa88fe48389cb1d31a3bc3c9cfe_130.png?v=1794436153"},{"product_id":"jba-2015-2020-mustang-eco-boost-after-cat-mid-pipe-304ss-31748sd","title":"JBA 2015-2020 Mustang Eco Boost After Cat Mid Pipe 304SS - 31748SD","description":"\u003cp\u003eThe JBA 31748SD is an after-cat mid pipe made from 304 stainless steel for the 2015-2020 Ford Mustang EcoBoost. As the name indicates, this section of exhaust tubing installs downstream of the catalytic converter, between the converter and the rest of the exhaust system, on the turbocharged four-cylinder S550 Mustang.\u003c\/p\u003e\n\u003cp\u003eJBA is a long-established name in aftermarket exhaust. This part is a good fit for EcoBoost owners who want to replace the factory mid pipe with a 304 stainless steel piece from a known exhaust manufacturer, either as a standalone upgrade or as part of a larger exhaust build.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eJBA part number 31748SD\u003c\/li\u003e\n\u003cli\u003eAfter-cat mid pipe that installs downstream of the catalytic converter\u003c\/li\u003e\n\u003cli\u003eConstructed from 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eDesigned for the 2015-2020 Mustang EcoBoost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eJBA builds the 31748SD from 304 stainless steel. This is a common choice for aftermarket exhaust components because it resists corrosion well, which matters for a pipe mounted under the car where it is exposed to heat, moisture, and road debris.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory mid pipe section behind the catalytic converter on a 2015-2020 Mustang EcoBoost\u003c\/li\u003e\n\u003cli\u003eMade from 304 stainless steel for corrosion resistance under the car\u003c\/li\u003e\n\u003cli\u003eComes from JBA, a recognized exhaust manufacturer, and is identified by a specific part number (31748SD) for straightforward ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2020 Ford Mustang EcoBoost\u003c\/li\u003e\u003c\/ul\u003e","brand":"JBA","offers":[{"title":"Default Title","offer_id":68306130436281,"sku":"JBA31748SD","price":254.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/f86c2e83e8539f2ef24b01d7f522ec86_1.jpg?v=1794436157"},{"product_id":"bbk-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-high-flow-design-direct-bolt-on","title":"BBK 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with High-Flow Design (Direct Bolt-On)","description":"\u003cp\u003eThe BBK Performance high-flow resonator delete X-pipe replaces the restrictive factory resonator on 5.0L Mustang GT models from 2015 onward. It fits directly where the OEM resonator assembly mounts and uses an X-pipe layout to provide a less restrictive path for exhaust gases. BBK designs it to increase horsepower and torque and to give the car a more aggressive exhaust note than stock.\u003c\/p\u003e\n\u003cp\u003eThe pipe is intended for S550 and later Mustang GT owners who want more performance and sound from the mid-section of the exhaust without replacing the entire system. BBK offers it for the factory exhaust and for aftermarket systems that use full-length exhaust headers, so confirm your exhaust configuration before ordering. It is built from CNC mandrel-bent tubing and is designed and manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete pipe that replaces the factory OEM resonator\u003c\/li\u003e\n\u003cli\u003eX-pipe configuration with a high-flow design\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent tubing to improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eDesigned to increase horsepower and torque\u003c\/li\u003e\n\u003cli\u003eProduces a more aggressive exhaust sound than the stock resonator\u003c\/li\u003e\n\u003cli\u003eOffered for the factory exhaust or for aftermarket systems using full-length exhaust headers\u003c\/li\u003e\n\u003cli\u003eSpecial reducers allow fitment to the factory exhaust where applicable\u003c\/li\u003e\n\u003cli\u003eIncludes detailed instructions plus the hardware and clamps required for installation\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA by BBK Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCNC Mandrel-Bent Tubing, Designed and Built in the USA\u003c\/h3\u003e\u003cp\u003eBBK forms the tubing for this resonator delete X-pipe with CNC mandrel bending. Mandrel bending keeps the tube diameter consistent through each bend, avoiding the crimped sections that restrict flow in press-bent pipe. CNC control keeps the bends consistent, which supports the direct-fit replacement of the factory resonator.\u003c\/p\u003e\u003cp\u003eBBK Performance designs and manufactures the pipe in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe factory resonator restricts exhaust flow. Removing it in favor of a high-flow X-pipe with mandrel-bent tubing lets the engine move exhaust gases more freely. BBK states that this improved flow increases horsepower and torque on the 5.0L Mustang GT.\u003c\/p\u003e\u003cp\u003eDeleting the resonator also changes the character of the exhaust. BBK designed this pipe to give the Mustang GT a more aggressive sound than the stock setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit replacement for the factory OEM resonator\u003c\/li\u003e\n\u003cli\u003eDetailed instructions, hardware, and clamps are included in the kit\u003c\/li\u003e\n\u003cli\u003eWhen installing on the factory exhaust, special reducers are used where applicable, and cutting and clamping is required\u003c\/li\u003e\n\u003cli\u003eVersions are offered for the factory exhaust and for aftermarket systems with full-length headers, so confirm your application before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the restrictive factory resonator to improve exhaust flow on the 5.0L Mustang GT\u003c\/li\u003e\n\u003cli\u003eGives the car a more aggressive exhaust note than stock\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent tubing helps maintain flow through the bends\u003c\/li\u003e\n\u003cli\u003eCan be used with the factory exhaust or with aftermarket full-length header systems\u003c\/li\u003e\n\u003cli\u003eComes with instructions, hardware, and clamps for the installation\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA by BBK Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete X-pipe\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003cli\u003eAll required clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68306134958265,"sku":"BBK1818","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/50a4fb9dbad582f4307e322946ab9cd9.jpg?v=1794782261"},{"product_id":"bbk-short-mid-h-pipe-w-convertors-for-use-w-1642-16420-2015-2017-mustang-v6-1465","title":"BBK Short Mid H Pipe W\/ Convertors For Use W\/ 1642\/16420 (2015-2017 Mustang V6) - 1465","description":"\u003cp\u003eThe BBK Performance Parts 1465 is a short mid H-pipe with catalytic converters, built to connect BBK CNC series long tube headers to the rest of the exhaust on 2015-2017 Mustang models with the 3.7L V6. Long tube headers relocate the collector outlets, so the factory mid-pipe will not line up. This H-pipe fills that gap and uses a merged step-down section to mate with the factory exhaust system downstream.\u003c\/p\u003e\n\u003cp\u003eThe pipe is made from CNC mandrel-bent 2.5-inch tubing. BBK pairs it specifically with its full-length long tube headers, part numbers 1642 and 16420, and it works with either the factory catback or an aftermarket catback. For V6 owners who have chosen or are planning a BBK long tube header install, this is the matching piece that completes the system. BBK says it is intended to improve performance and give a more aggressive exhaust note than stock, and it is designed and manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eShort mid H-pipe configuration with catalytic converters\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent 2.5-inch tubing\u003c\/li\u003e\n\u003cli\u003eMerged step-down design for connection to the factory exhaust system\u003c\/li\u003e\n\u003cli\u003eDesigned for use with BBK long tube full-length headers, part numbers 1642 and 16420\u003c\/li\u003e\n\u003cli\u003eCompatible with the factory catback or aftermarket catback exhaust systems\u003c\/li\u003e\n\u003cli\u003eIntended to increase performance and produce a more aggressive sound than stock\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA by BBK Performance Parts\u003c\/li\u003e\n\u003cli\u003eNot CARB emissions certified\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCNC Mandrel-Bent 2.5-Inch Tubing\u003c\/h3\u003e\u003cp\u003eBBK forms this H-pipe from 2.5-inch tubing bent on CNC mandrel equipment. Mandrel bending keeps the tube's inside diameter consistent through each bend instead of letting it crimp or flatten. That supports exhaust flow, horsepower, and torque. CNC control of the bending process gives repeatable bend geometry from one pipe to the next.\u003c\/p\u003e\u003cp\u003eA merged step-down section transitions from the H-pipe to the factory exhaust connection, so the pipe ties into the stock system without custom fabrication. BBK designs and manufactures the part in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eBecause the tubing is mandrel bent at a consistent 2.5-inch diameter, exhaust gases move through the bends without the restriction of crushed or narrowed sections. BBK states this tubing is intended to maximize exhaust flow, horsepower, and torque.\u003c\/p\u003e\u003cp\u003eBBK also designed the pipe to give the 3.7L V6 a more aggressive sound than the factory exhaust. It is intended to work as part of a complete BBK long tube header setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned specifically to connect BBK long tube headers, part numbers 1642 and 16420, to the factory exhaust system\u003c\/li\u003e\n\u003cli\u003eMerged step-down design allows connection to the factory exhaust system\u003c\/li\u003e\n\u003cli\u003eRetains compatibility with the stock catback or an aftermarket catback exhaust system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLong tube headers require a matching mid-pipe, and this H-pipe is engineered specifically for BBK headers 1642 and 16420 on the 3.7L V6\u003c\/li\u003e\n\u003cli\u003eIt retains catalytic converters, unlike off-road-only mid-pipe versions\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent 2.5-inch tubing maintains consistent diameter through every bend for better flow\u003c\/li\u003e\n\u003cli\u003eWorks with the factory catback, so it can be added without replacing the rest of the exhaust\u003c\/li\u003e\n\u003cli\u003eDelivers a more aggressive exhaust note than the stock system, per BBK\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang V6\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eShort mid H-pipe with catalytic converters\u003c\/li\u003e\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68306135318713,"sku":"BBK1465","price":619.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/bbk-performance-performance-exhaust-default-title-ford-mustang-v6-high-flow-catted-short-mid-h-pipe-for-long-tubes-15-17-26999110992051.jpg?v=1794430601"},{"product_id":"stainless-works-2018-2026-ford-mustang-gt-mid-resonator-delete-x-pipe-with-high-flow-design-direct-fit","title":"Stainless Works 2018-2026 Ford Mustang GT Mid-Resonator Delete X-Pipe with High-Flow Design (Direct-Fit)","description":"\u003cp\u003eThe Stainless Works Mid-Resonator Delete X-Pipe is a direct-fit crossover for the 2018-2026 Ford Mustang GT with the 5.0L V8. It takes the place of the factory resonator in the middle of the exhaust system, putting a performance X-style crossover where the stock muffling chamber used to sit. The goal is a more distinctive exhaust note and better flow from the Coyote engine without rebuilding the whole system.\u003c\/p\u003e\n\u003cp\u003eBecause it is built as a clamp-in part, it suits owners who want a meaningful exhaust change they can handle in their own garage. The pipe uses smooth mandrel bends to keep exhaust gases moving efficiently and is fully TIG welded for strength and a clean finished look. The clamps needed to fit it are included. For Mustang GT owners who want more sound and a freer-flowing mid-section, it is a simple upgrade to the factory hardware.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete that removes the factory middle resonator\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover design for the 2018-2026 Mustang GT 5.0L\u003c\/li\u003e\n\u003cli\u003eSmooth mandrel bends to optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eFully TIG welded construction for strength and appearance\u003c\/li\u003e\n\u003cli\u003eDirect-fit, clamp-in installation\u003c\/li\u003e\n\u003cli\u003eClamps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent, Fully TIG-Welded Construction\u003c\/h3\u003e\u003cp\u003eStainless Works forms the tubing with smooth mandrel bends, which hold a consistent pipe diameter through each turn instead of crimping or flattening the tube. That consistency helps exhaust gases move through the crossover with less restriction.\u003c\/p\u003e\u003cp\u003eEvery joint is fully TIG welded. TIG welding gives precise, controlled beads that add structural strength at the seams and leave a neat, professional appearance on the finished part.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory mid resonator removes one of the stock exhaust's main sound-dampening components, so the 5.0L's exhaust note comes through more clearly. The X-pipe crossover then routes and merges flow between the two sides of the system.\u003c\/p\u003e\u003cp\u003eThe manufacturer presents the part as a way to improve both sound and power. It does not publish specific horsepower or torque figures.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a direct-fit, clamp-in installation\u003c\/li\u003e\n\u003cli\u003eRequired clamps are included with the X-pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory mid resonator for a more noticeable exhaust note from the 5.0L V8\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing keeps flow smooth through the crossover\u003c\/li\u003e\n\u003cli\u003eFully TIG welded joints provide strength and a clean look\u003c\/li\u003e\n\u003cli\u003eClamp-in, direct-fit design suits owners who do their own work\u003c\/li\u003e\n\u003cli\u003eComes with the clamps needed for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete X-pipe\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68306141577401,"sku":"SSWM18RESDX","price":546.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/m18resdx-1-primary.jpg?v=1794436169"},{"product_id":"mishimoto-2015-2018-ford-mustang-gt-x-pipe-resonator-delete-with-improved-sound-output-direct-fit-design","title":"Mishimoto 2015-2018 Ford Mustang GT X-Pipe Resonator Delete with Improved Sound Output (Direct-Fit Design)","description":"\u003cp\u003eThe Mishimoto X-Pipe Resonator Delete is a mid-pipe section for the S550-generation Ford Mustang GT that takes the place of the factory exhaust resonator. In its location, it installs an X-pipe crossover fabricated entirely from 304 stainless steel, with mandrel-bent tubing and TIG-welded joints. The aim is a less restrictive path for exhaust gases and a more pronounced exhaust note from the V8.\u003c\/p\u003e\n\u003cp\u003eThis part suits Mustang GT owners who want more volume and a sharper character from the exhaust without changing their rear mufflers. Mishimoto designed it to connect to either the factory rear mufflers or aftermarket units, and it works on both manual and automatic transmission cars. The manufacturer suggests pairing it with the Mishimoto Mustang GT Axleback exhaust for the strongest overall result. It is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEliminates the factory resonator and installs an X-pipe crossover section in its location\u003c\/li\u003e\n\u003cli\u003eConstructed entirely of 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for improved exhaust flow\u003c\/li\u003e\n\u003cli\u003eTIG-welded joints\u003c\/li\u003e\n\u003cli\u003eProduces a more aggressive, higher-pitched exhaust note under acceleration\u003c\/li\u003e\n\u003cli\u003eCut-and-clamp design developed specifically for the 2015-and-later Mustang GT\u003c\/li\u003e\n\u003cli\u003eClamps in place and connects to either stock or aftermarket rear mufflers\u003c\/li\u003e\n\u003cli\u003eCompatible with manual and automatic transmission vehicles\u003c\/li\u003e\n\u003cli\u003eAdditional sleeve-style exhaust clamps supplied for a secure connection\u003c\/li\u003e\n\u003cli\u003eCovered by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eEvery section of this X-pipe is made of 304 stainless steel, a grade commonly chosen for exhaust work because it resists corrosion and holds up well to heat cycling. Mishimoto also cites the material's appearance as a benefit, which matters on a component that can be seen from under the car.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, so the bends keep their diameter instead of pinching or collapsing the way crush-bent pipe can. The joints are TIG welded, a method that gives precise control over the weld and produces clean, consistent seams on stainless steel.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory resonator and installing an X-pipe crossover opens up the mid-section of the exhaust. Combined with the mandrel-bent tubing, this is intended to give exhaust gases a less restrictive route toward the rear mufflers.\u003c\/p\u003e\u003cp\u003eThe most noticeable change is the sound. Mishimoto states the X-pipe raises the overall volume of the Mustang GT exhaust and gives it a more aggressive, higher-pitched tone when accelerating. Because it works with factory or aftermarket rear mufflers, the final sound will depend on which mufflers are installed behind it. Mishimoto recommends combining it with its Mustang GT Axleback exhaust for the best exhaust performance.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCut-and-clamp design made specifically for the 2015-and-later Mustang GT\u003c\/li\u003e\n\u003cli\u003eClamps into place and connects to either stock or aftermarket rear mufflers\u003c\/li\u003e\n\u003cli\u003eFits both manual and automatic transmission vehicles\u003c\/li\u003e\n\u003cli\u003eAdditional sleeve-style exhaust clamps are supplied for a reliable connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a louder exhaust with a sharper, higher-pitched tone under acceleration\u003c\/li\u003e\n\u003cli\u003eYou prefer to keep your current rear mufflers, whether factory or aftermarket, while changing the exhaust character\u003c\/li\u003e\n\u003cli\u003eYou want an exhaust component made of 304 stainless steel with mandrel-bent tubing and TIG-welded joints\u003c\/li\u003e\n\u003cli\u003eYou plan to build a matched system with the Mishimoto Mustang GT Axleback exhaust\u003c\/li\u003e\n\u003cli\u003eYou value the long-term coverage of the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe resonator delete section\u003c\/li\u003e\n\u003cli\u003eSleeve-style exhaust clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMishimoto Lifetime Warranty\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68306247712953,"sku":"MISMMEXH-MUS8-15XP","price":348.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/MMEXH-MUS8-15XP_1.jpg?v=1794436183"}],"url":"https:\/\/engmustangs.com\/collections\/s550-x-pipes-mid-pipes.oembed","provider":"ENG Mustangs","version":"1.0","type":"link"}