{"title":"S550 Mustang Mufflers \u0026 Resonator Deletes","description":null,"products":[{"product_id":"corsa-2015-2026-ford-mustang-gt-dark-horse-3-double-h-pipe-with-stainless-steel-construction-5-0l","title":"CORSA 2015-2026 Ford Mustang GT\/Dark Horse 3\" Double H-Pipe with Stainless Steel Construction (5.0L)","description":"\u003cp\u003eThe CORSA 3.0-inch Double H-Pipe replaces the factory mid-pipe section on the 5.0L Coyote-powered Ford Mustang GT, including the Dark Horse, from 2015 through 2026. It is designed to work as part of a complete CORSA exhaust system, giving the V8 a more aggressive voice while keeping highway cruising free of drone.\u003c\/p\u003e\n\u003cp\u003eFor owners who already run an axle-back or plan a full exhaust build, this H-pipe is a straightforward way to raise the sound level and improve exhaust flow without welding or cutting. It suits drivers who want a noticeably stronger exhaust note that stays civil on long drives.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3.0-inch double H-pipe design for the 5.0L V8\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction\u003c\/li\u003e\n\u003cli\u003eEstimated 23.43% increase in exhaust flow, per CORSA (actual results may vary)\u003c\/li\u003e\n\u003cli\u003eAggressive sound through the gears with a distinct rumble at idle\u003c\/li\u003e\n\u003cli\u003eNo drone during cruise\u003c\/li\u003e\n\u003cli\u003eMoves an axle-back exhaust system up one sound level\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered and manufactured in Berea, Ohio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCORSA builds this H-pipe from premium stainless steel, chosen for its performance, appearance and contribution to the system's sound. Each pipe is made for specific vehicles to ensure correct fitment and performance.\u003c\/p\u003e\u003cp\u003eEvery unit is designed, engineered and manufactured by CORSA in Berea, Ohio.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe double H-pipe layout increases exhaust flow by an estimated 23.43% according to CORSA, with actual results varying by vehicle. On the street, it delivers an aggressive, high-performance tone through the gears and a distinct rumble at idle.\u003c\/p\u003e\u003cp\u003ePaired with an axle-back system, it raises the overall sound by one level, while CORSA's design keeps the cabin free of drone at cruising speed.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation; no welding needed\u003c\/li\u003e\n\u003cli\u003eIncludes the necessary hardware and detailed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds volume and character to an existing CORSA axle-back without introducing highway drone\u003c\/li\u003e\n\u003cli\u003eImproves exhaust flow over the factory mid-pipe section\u003c\/li\u003e\n\u003cli\u003eBolts on with no welding or fabrication\u003c\/li\u003e\n\u003cli\u003eBacked by a limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang Dark Horse \/ GT (5.0L), Fastback\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L), Convertible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble H-pipe\u003c\/li\u003e\n\u003cli\u003eInstallation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eLimited lifetime warranty with proof of purchase, for as long as you own the vehicle. The exhaust must be installed on the specified vehicle for the warranty to remain valid.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68304222191801,"sku":"COR14502","price":614.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/Picture1.jpg?v=1794370743"},{"product_id":"mbrp-3-exhaust-resonator-delete-x-pipe-stainless-steel-2020-2022-shelby-gt500-2026-mustang-dark-horse-sc-s7219409","title":"MBRP 3\" Exhaust Resonator Delete X-Pipe - Stainless Steel (2020-2022 Shelby GT500 \/ 2026 Mustang Dark Horse SC) - S7219409","description":"\u003cp\u003eThe MBRP XP-Series 3-inch Resonator Delete X-Pipe replaces the factory resonator section on the 2020-2022 Shelby GT500 and the 2026 Mustang Dark Horse SC. It is mandrel-bent stainless steel and is designed to raise the sound level and attitude of these supercharged Mustangs.\u003c\/p\u003e\n\u003cp\u003eThe factory resonator restricts both sound and exhaust flow. Swapping it for this free-flowing X-pipe increases flow, removes weight and gives the car a more aggressive tone, all in one relatively simple modification.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch X-pipe that replaces the factory resonators\u003c\/li\u003e\n\u003cli\u003eMandrel-bent for maximum flow\u003c\/li\u003e\n\u003cli\u003eStainless steel construction\u003c\/li\u003e\n\u003cli\u003eReduces back pressure and increases exhaust flow\u003c\/li\u003e\n\u003cli\u003eLighter than the factory section and resonators\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary clamps\u003c\/li\u003e\n\u003cli\u003eNo welding or tuning required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent Stainless Steel\u003c\/h3\u003e\u003cp\u003eMBRP builds this X-pipe from stainless steel and mandrel-bends the tubing to keep its full diameter through every bend for maximum flow.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonators opens up exhaust flow and noticeably increases the sound level, while the X-pipe design gives these cars a more aggressive tone. It is also lighter than the factory parts it replaces.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRequires cutting the factory exhaust piping; after that, it is a bolt-in installation\u003c\/li\u003e\n\u003cli\u003eNo welding required\u003c\/li\u003e\n\u003cli\u003eNo tuning required\u003c\/li\u003e\n\u003cli\u003eAll necessary clamps are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMuch more sound from a GT500 or Dark Horse SC\u003c\/li\u003e\n\u003cli\u003eBetter exhaust flow and less weight than the factory resonators\u003c\/li\u003e\n\u003cli\u003eSimple modification with no welding or tuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2020-2022 Ford Mustang GT500\u003c\/li\u003e\n\u003cli\u003e2026 Ford Mustang Dark Horse SC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWill NOT fit any other Mustang models beyond those listed above\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe\u003c\/li\u003e\n\u003cli\u003eAll necessary clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68304223928505,"sku":"MBRPS7219409","price":304.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_fb941d06-3b5c-4952-a7ad-f5cda0c32620.webp?v=1794435503"},{"product_id":"steeda-2015-2026-ford-mustang-gt-resonator-delete-h-pipe-with-304-stainless-steel-construction-direct-fit","title":"Steeda 2015-2026 Ford Mustang GT Resonator Delete H-Pipe with 304 Stainless Steel Construction (Direct-Fit)","description":"\u003cp\u003eThe Steeda Resonator Delete H-Pipe is a 304 stainless steel mid-pipe that takes the place of the factory resonator assembly on S550 and S650 Mustangs powered by the 5.0L Coyote V8. It is built from 2.5 inch mandrel-bent tubing and uses an H-style crossover design. It fits in the exhaust system downstream of the stock catalytic converters and upstream of the OEM mufflers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Steeda states gains of up to +2 hp and up to +2 lb-ft of torque. The manufacturer does not list specific test conditions for these figures.\u003c\/p\u003e\n\u003cp\u003eRemoving the resonator gives the exhaust a deeper, traditional muscle car tone, and the H-pipe layout is designed to build low-RPM torque compared to the factory resonator. It also cuts up to 6.5 pounds from the car. The pipe is intended for GT, Mach 1, and Bullitt models. It keeps the factory heat shields used on 2018 and newer GTs, works with virtually all aftermarket axle-back systems, and does not need a tune. That makes it a practical, budget-minded way to change the character of a Coyote-powered Mustang.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003e2.5 inch diameter mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover design that replaces the factory resonator\u003c\/li\u003e\n\u003cli\u003e32 inch overall length\u003c\/li\u003e\n\u003cli\u003eUp to 6.5 lbs lighter than the factory setup\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated gains of up to +2 hp and up to +2 lb-ft of torque\u003c\/li\u003e\n\u003cli\u003eImproves low-end torque compared to the factory resonator\u003c\/li\u003e\n\u003cli\u003eDeep, traditional muscle car exhaust note\u003c\/li\u003e\n\u003cli\u003eRetains the factory exhaust heat shields on 2018 and newer GT models without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eFlush-fit band clamps allow the pipe to be shortened if needed and help prevent leaks common with expanded-end kits\u003c\/li\u003e\n\u003cli\u003eSupplied band clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually all aftermarket axle-back exhaust kits\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003cli\u003eIntended for Mustang GT, Bullitt, and Mach 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this H-pipe from 304 stainless steel. 409 stainless often develops surface rust, and aluminized mild steel can corrode all the way through, while 304 resists both. That makes it a good choice for cars driven year-round or in wet climates.\u003c\/p\u003e\u003cp\u003eThe 2.5 inch tubing is mandrel bent, so the pipe keeps a consistent diameter through each bend. The pipe joins the exhaust with flush-fit band clamps rather than expanded slip-fit ends. Steeda notes that this approach avoids the exhaust leaks common with expanded-end kits and also lets the installer trim the pipe to a shorter length when needed.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith the factory resonator removed and the H-style crossover in place, the exhaust develops a deeper, more traditional muscle car tone. Steeda states that the H design increases torque at lower RPM compared to the factory resonator. The manufacturer quotes up to +2 hp and up to +2 lb-ft of torque, and no tune is required.\u003c\/p\u003e\u003cp\u003eSwapping the resonator assembly for this pipe saves up to 6.5 pounds. Because it works with virtually all aftermarket axle-back kits, it can be added to an existing rear exhaust or used as one step in a staged exhaust build.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCutting of the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market\u003c\/li\u003e\n\u003cli\u003eThe H-pipe mounts downstream of the stock catalytic converters and ahead of the OEM mufflers\u003c\/li\u003e\n\u003cli\u003eFactory heat shields on 2018 and newer GT models can stay in place without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the pipe to be cut to a shorter length if needed\u003c\/li\u003e\n\u003cli\u003eThe supplied band clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003cli\u003eNo tune is required after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a deeper, traditional V8 exhaust tone from your Coyote-powered Mustang without replacing the entire system\u003c\/li\u003e\n\u003cli\u003eThe H-pipe layout targets low-RPM torque compared to the factory resonator\u003c\/li\u003e\n\u003cli\u003eIt removes up to 6.5 pounds from the car\u003c\/li\u003e\n\u003cli\u003e304 stainless steel resists the surface rust and rust-through seen with 409 stainless and aluminized steel\u003c\/li\u003e\n\u003cli\u003eOn 2018 and newer GTs, you can keep the factory heat shields without modifying them\u003c\/li\u003e\n\u003cli\u003eIt pairs with virtually all aftermarket axle-back kits\u003c\/li\u003e\n\u003cli\u003eNo tune is needed, and the supplied clamps let you return to the factory resonator if you choose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT \/ Mach 1 \/ Bullitt\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel resonator delete H-pipe\u003c\/li\u003e\n\u003cli\u003eBand clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304692084921,"sku":"SDA-555-3619","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3619_P04.jpg?v=1794436008"},{"product_id":"steeda-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-304-stainless-steel-construction-direct-fit","title":"Steeda 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with 304 Stainless Steel Construction (Direct-Fit)","description":"\u003cp\u003eThe Steeda Resonator Delete X-Pipe replaces the factory resonator section on 5.0L Coyote-powered S550 and S650 Mustangs. It is built from T-304 stainless steel using mandrel-bent 2.5-inch diameter tubing, and it mounts in the factory location between the stock catalytic converters and the stock mufflers. Removing the resonators and adding an X-style crossover changes the exhaust note to a more aggressive, race-inspired tone. Steeda also cites gains in output, flow, and weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Steeda states gains of up to +8 hp and up to +9.5 lb-ft of torque. The manufacturer notes that no tune is required. No further test conditions are specified.\u003c\/p\u003e\n\u003cp\u003eThis part suits GT, Bullitt, Mach 1, and Dark Horse owners who want a sharper sound and a measurable improvement without a tune. Steeda states it works with virtually all aftermarket axle-back systems, so it can pair with an existing or planned rear exhaust. On 2018 and newer GT models, it keeps the factory exhaust heat shields without modifying either the pipe or the shields. The band clamps also leave a path back to stock, because they allow the factory resonator to be reinstalled.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eT-304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2.5-inch diameter tubing\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover with a smooth transition, which Steeda says creates more scavenging than traditional H-pipe designs\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated exhaust flow improvement of up to 20% over the factory resonator and H-pipe designs\u003c\/li\u003e\n\u003cli\u003eUp to +8 hp and up to +9.5 lb-ft of torque, per Steeda\u003c\/li\u003e\n\u003cli\u003eSheds up to 7 lb compared to the factory resonator section\u003c\/li\u003e\n\u003cli\u003e32-inch overall length\u003c\/li\u003e\n\u003cli\u003eFlush-fit band clamps allow the X-pipe to be shortened if needed\u003c\/li\u003e\n\u003cli\u003eClamp design helps prevent the exhaust leaks common with expanded-end kits\u003c\/li\u003e\n\u003cli\u003eRetains the factory exhaust heat shields on 2018 and newer GT models without cutting, expanding, or chiseling\u003c\/li\u003e\n\u003cli\u003eInstalls between the factory catalytic converters and factory mufflers\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually all aftermarket axle-back exhaust kits\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this X-pipe from T-304 stainless steel tubing. According to the manufacturer, it will not develop the surface rust typical of 409 stainless steel. It also will not rust completely through the way aluminized mild steel pipes can. That matters for a component mounted low under the car, where it is exposed to moisture, road salt, and heat cycling.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent at a 2.5-inch diameter, so the pipe keeps a consistent cross-section through each bend. Instead of expanded slip-fit ends, the X-pipe uses flush-fit band clamps. Steeda says this approach prevents the exhaust leaks common with expanded-end kits. The same clamps also allow the pipe to be trimmed to a shorter length when needed.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe X-shaped crossover merges the two exhaust banks through a smooth transition. Steeda states this produces a stronger scavenging effect than a traditional H-pipe, which supports added power at high RPM. The manufacturer rates the design at up to 20% better exhaust flow than the factory resonator and H-pipe layouts. It also lists gains of up to 8 hp and 9.5 lb-ft of torque with no tune required.\u003c\/p\u003e\u003cp\u003eDeleting the resonators gives the Coyote V8 a more aggressive, race-inspired exhaust tone. The swap also removes up to 7 lb from the exhaust system.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts between the factory catalytic converters and the factory mufflers\u003c\/li\u003e\n\u003cli\u003eCutting of the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the X-pipe to be shortened to suit the installation\u003c\/li\u003e\n\u003cli\u003eOn 2018 and newer GT models, the factory heat shields can stay in place without modifying the X-pipe or the shields\u003c\/li\u003e\n\u003cli\u003eNo tune is required after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory resonators for a more aggressive exhaust tone on a Coyote-powered Mustang\u003c\/li\u003e\n\u003cli\u003eManufacturer-stated gains of up to 8 hp and 9.5 lb-ft without a tune\u003c\/li\u003e\n\u003cli\u003eT-304 stainless steel resists the surface rust seen on 409 stainless and the rust-through seen on aluminized steel\u003c\/li\u003e\n\u003cli\u003eRemoves up to 7 lb from the exhaust system\u003c\/li\u003e\n\u003cli\u003eKeeps the 2018 and newer factory heat shields without cutting or chiseling\u003c\/li\u003e\n\u003cli\u003eWorks with virtually all aftermarket axle-back systems, so it fits into a staged exhaust build\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT \/ Mach 1 \/ Dark Horse \/ Bullitt\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304692150457,"sku":"SDA-555-3618","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3618_P04.jpg?v=1794436009"},{"product_id":"steeda-304-stainless-resonator-delete-h-x-pipe-2015-2026-mustang-gt-555-3625","title":"Steeda 304 Stainless Resonator Delete H\/X-Pipe (2015-2026 Mustang GT) - 555-3625","description":"\u003cp\u003eThe Steeda 555-3625 is a resonator delete mid-pipe built from 304 stainless steel for the 5.0L Coyote-powered S550 and S650 Mustang. It replaces the factory resonator section with a hybrid H\/X layout, which Steeda also calls a Hex Pipe. A smooth transition and crossover are intended to combine the characteristics of an H-pipe and an X-pipe in one assembly. The tubing is 2.5 inch mandrel-bent, the overall length is 32 inches, and Steeda builds it in the USA to a patent-pending design.\u003c\/p\u003e\n\u003cp\u003eThe part is aimed at owners who want a more aggressive, race-inspired exhaust note and less weight without retuning the car. Steeda states that it removes up to 6 pounds and does not require a tune. It fits in the mid-pipe position, after the stock catalytic converters and before the stock mufflers, and works with virtually all aftermarket axle-back systems. Unlike many competing resonator deletes, it keeps the factory heat shields on 2018 and newer GT models with no cutting or modification of the shields. It suits GT, Bullitt, Mach 1, and Dark Horse owners building a lighter, louder exhaust in stages.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eU.S.-sourced T-304 stainless steel tubing\u003c\/li\u003e\n\u003cli\u003e2.5 inch diameter mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eHybrid H\/X (Hex Pipe) design with a smooth transition and crossover section\u003c\/li\u003e\n\u003cli\u003ePatent-pending design\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003e32 inch overall length\u003c\/li\u003e\n\u003cli\u003eFlush-fit band clamps allow the pipe to be cut shorter if needed\u003c\/li\u003e\n\u003cli\u003eBand clamps help prevent the exhaust leaks common with expanded-end kits\u003c\/li\u003e\n\u003cli\u003eRetains the factory exhaust heat shields on 2018 and newer GT models\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003cli\u003eRemoves up to 6 lbs compared to the factory setup\u003c\/li\u003e\n\u003cli\u003eAggressive, race-inspired exhaust tone\u003c\/li\u003e\n\u003cli\u003eNo tune required\u003c\/li\u003e\n\u003cli\u003eCompatible with virtually all aftermarket axle-back exhaust kits\u003c\/li\u003e\n\u003cli\u003eSteeda part number 555-3625\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eU.S.-Sourced T-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this H\/X-pipe from T-304 stainless steel tubing sourced in the United States and mandrel-bent to a consistent 2.5 inch diameter. According to the manufacturer, 304 stainless will not develop the surface rust typical of 409 stainless, and it will not corrode through the way aluminized mild steel pipes eventually can. For a component that sits low under the car and takes road spray, salt, and heat cycling, that material choice matters for long-term durability.\u003c\/p\u003e\u003cp\u003eThe pipe connects with flush-fit band clamps instead of expanded slip-fit ends. Steeda notes that this joint style helps prevent the exhaust leaks often seen with expanded-end kits. It also lets you trim the pipe shorter where needed for fitment. The design is patent pending, and the part is manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe core of the design is the hybrid H\/X crossover. A smooth transition between the two banks is meant to deliver the benefits of both an H-pipe and an X-pipe in one part. With the factory resonator gone, the Coyote V8 takes on a noticeably more aggressive, race-inspired tone.\u003c\/p\u003e\u003cp\u003eRemoving the resonator also takes weight out of the car, with Steeda citing a reduction of up to 6 pounds. The pipe requires no tune, so it can be installed without changing the engine calibration.\u003c\/p\u003e\u003cp\u003eOn 2018 and newer GT models, the pipe was engineered to work with the factory heat shields as they are. Many competing resonator deletes require you to cut and expand the pipe to clear the OE shields, or to chisel the shields off. This one avoids both. It is also compatible with virtually all aftermarket axle-back systems, so it pairs easily with an existing or planned rear exhaust upgrade.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts in the mid-pipe location, downstream of the stock catalytic converters and upstream of the stock mufflers\u003c\/li\u003e\n\u003cli\u003eCutting the OE exhaust pipes is required; Steeda notes this applies to all resonator deletes on the market\u003c\/li\u003e\n\u003cli\u003eNo tune is required after installation\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the H\/X-pipe to be cut to a shorter length if needed for fitment\u003c\/li\u003e\n\u003cli\u003eFactory heat shields on 2018 and newer GT models can stay in place without cutting or chiseling\u003c\/li\u003e\n\u003cli\u003eBand clamps allow the factory resonator to be reinstalled at a later date\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGives the Coyote V8 a more aggressive, race-inspired exhaust tone by eliminating the factory resonator\u003c\/li\u003e\n\u003cli\u003eTakes up to 6 pounds out of the exhaust system\u003c\/li\u003e\n\u003cli\u003eRequires no tune, so the engine calibration stays as it is\u003c\/li\u003e\n\u003cli\u003eT-304 stainless tubing resists the surface rust of 409 stainless and the rust-through of aluminized steel\u003c\/li\u003e\n\u003cli\u003eKeeps the factory heat shields on 2018 and newer GT models without cutting or removal\u003c\/li\u003e\n\u003cli\u003eWorks with virtually all aftermarket axle-back kits for a staged exhaust build\u003c\/li\u003e\n\u003cli\u003eBand-clamp connections allow the factory resonator to be reinstalled later\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT \/ Mach 1 \/ Dark Horse \/ Bullitt\u003c\/li\u003e\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68304696180921,"sku":"SDA-555-3625","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/hex_pipe_8-6-25__15449.1754504883.jpg?v=1794436007"},{"product_id":"roush-2015-2026-ford-mustang-gt-resonator-delete-h-pipe-with-improved-sound-direct-fit","title":"ROUSH 2015-2026 Ford Mustang GT Resonator Delete H-Pipe with Improved Sound (Direct-Fit)","description":"\u003cp\u003eThe ROUSH Resonator Delete H-Pipe is a direct-fit mid-pipe assembly for the 5.0L V8 Mustang GT that removes the factory resonator from the exhaust path. In its place is a 2.5-inch H-pipe formed from mandrel-bent stainless steel. ROUSH engineered it from OEM vehicle CAD data so it lines up with the factory exhaust components. It works with both Ford and ROUSH Active Exhaust Systems.\u003c\/p\u003e\n\u003cp\u003eRemoving the factory resonator, which ROUSH describes as restrictive, gives the exhaust a deeper, more aggressive tone with a race-inspired growl. ROUSH says the H-pipe increases flow through the exhaust system and lowers back pressure. It also states that replacing the resonator with this part will not set a check engine light. For S550 and later Mustang GT owners who want a more assertive V8 sound for street or track use from a single bolt-in mid-pipe change, it is a practical upgrade backed by a 3-year limited warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete design that removes the factory resonator from the exhaust system\u003c\/li\u003e\n\u003cli\u003eH-pipe configuration with 2.5-inch tubing\u003c\/li\u003e\n\u003cli\u003eConstructed from corrosion-resistant, high-grade stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent flow and reduced back pressure\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered using OEM vehicle CAD data for accurate fitment\u003c\/li\u003e\n\u003cli\u003eDirect-fit design\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford and ROUSH Active Exhaust Systems\u003c\/li\u003e\n\u003cli\u003ePer ROUSH, replacing the factory resonator with this H-pipe will not trigger a check engine light\u003c\/li\u003e\n\u003cli\u003eProduces a deeper, more aggressive, race-inspired exhaust tone\u003c\/li\u003e\n\u003cli\u003eSuitable for street and track use\u003c\/li\u003e\n\u003cli\u003eBacked by a ROUSH 3-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 2.5-Inch Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eROUSH builds the H-pipe assembly from high-grade stainless steel chosen for corrosion resistance and long service life. That matters for a component that sits low under the car and is exposed to heat, moisture, and road debris.\u003c\/p\u003e\u003cp\u003eThe 2.5-inch tubing is mandrel-bent, so the pipe keeps a consistent diameter through each bend instead of crimping or flattening. ROUSH developed the assembly from OEM vehicle CAD data so it fits the factory exhaust mounting points and connections.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonator changes the character of the 5.0L V8 exhaust note. ROUSH describes the result as a deep, aggressive, race-inspired growl. Because the part is compatible with Ford and ROUSH Active Exhaust Systems, cars with active exhaust can keep using that feature after the swap.\u003c\/p\u003e\u003cp\u003eWith the resonator gone and mandrel-bent tubing in place, ROUSH says the H-pipe increases exhaust flow and reduces back pressure, which it links to improved horsepower and torque. ROUSH does not publish specific gain figures. The manufacturer also states that the change will not trigger a check engine light.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eROUSH describes installation as quick and simple.\u003c\/li\u003e\n\u003cli\u003eDirect-fit design engineered from OEM vehicle CAD data to match the factory exhaust layout.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a deeper, more aggressive V8 exhaust tone than the factory resonator allows.\u003c\/li\u003e\n\u003cli\u003eYour car has a Ford or ROUSH Active Exhaust System and you want a mid-pipe that stays compatible with it.\u003c\/li\u003e\n\u003cli\u003eYou prefer stainless steel construction for corrosion resistance and durability.\u003c\/li\u003e\n\u003cli\u003eYou want mandrel-bent tubing that keeps flow consistent and reduces back pressure.\u003c\/li\u003e\n\u003cli\u003eYou want a resonator delete that, per ROUSH, will not set a check engine light.\u003c\/li\u003e\n\u003cli\u003eYou want a manufacturer-backed part covered by a 3-year limited warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\n\u003cli\u003e2015-2019 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eROUSH 3-year limited warranty\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68304696574137,"sku":"RSH422119","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c3d2b7c28f4e68e53a0cba3a279889dd.jpg?v=1794782234"},{"product_id":"roush-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-improved-sound-direct-fit","title":"ROUSH 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with Improved Sound (Direct-Fit)","description":"\u003cp\u003eThe ROUSH Resonator Delete X-Pipe is a direct-fit mid-pipe for the 5.0L Coyote V8 Mustang GT. It replaces the factory resonator section with a 2.5-inch stainless steel X-pipe, removing the resonators from the exhaust path and merging the two banks through an X-style crossover. ROUSH designs the assembly to cut back pressure, improve exhaust flow, and give the car a more aggressive, race-inspired exhaust note than the stock setup.\u003c\/p\u003e\n\u003cp\u003eThis is a practical upgrade for Mustang GT owners who want more sound and better flow without changing the rest of their exhaust system. ROUSH engineered the part from OEM vehicle CAD data for an accurate fit. It works with both Ford and ROUSH active exhaust systems, installs without vehicle modifications, ships with the necessary hardware, and is backed by a ROUSH limited warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEliminates the factory resonators for a more aggressive, growling exhaust tone\u003c\/li\u003e\n\u003cli\u003eX-pipe design increases exhaust flow and reduces back pressure\u003c\/li\u003e\n\u003cli\u003e2.5-inch X-pipe assembly\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for consistent flow through the bends\u003c\/li\u003e\n\u003cli\u003eHigh-grade stainless steel construction for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eDesigned and engineered using OEM vehicle CAD data for an accurate fit\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford factory active exhaust and ROUSH active exhaust systems\u003c\/li\u003e\n\u003cli\u003eFits both fastback and convertible 5.0L V8 Mustang GT models\u003c\/li\u003e\n\u003cli\u003e12-pound weight reduction compared to the stock assembly, as stated by ROUSH\u003c\/li\u003e\n\u003cli\u003eDirect-fit installation with no vehicle modifications required\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary hardware\u003c\/li\u003e\n\u003cli\u003eROUSH 3-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eROUSH builds the Resonator Delete X-Pipe from high-grade stainless steel. The material was chosen for long-term durability and corrosion resistance, two qualities that matter for a component mounted low under the car where it is exposed to road debris, moisture, and repeated heat cycles.\u003c\/p\u003e\u003cp\u003eThe 2.5-inch tubing is mandrel bent, so the pipe keeps a consistent inside diameter through each bend instead of crimping or flattening. ROUSH developed the assembly from OEM vehicle CAD data, which lets it bolt in at the factory mounting locations as a true direct-fit part.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonators changes the character of the Coyote V8's exhaust note. ROUSH describes the result as a racecar-like growl, with a more aggressive sound than the stock system produces.\u003c\/p\u003e\u003cp\u003eThe X-pipe merges the two exhaust banks and, with the mandrel-bent tubing, reduces back pressure and improves flow through the system. ROUSH states this improves horsepower, torque, and overall performance, but does not publish specific gain figures. The part also works with Ford's factory active exhaust, so owners with active valves can keep that function after installation.\u003c\/p\u003e\u003cp\u003eROUSH lists a 12-pound weight reduction compared to the stock assembly.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit design; ROUSH describes installation as quick and easy\u003c\/li\u003e\n\u003cli\u003eNo vehicle modifications required\u003c\/li\u003e\n\u003cli\u003eAll necessary hardware is included\u003c\/li\u003e\n\u003cli\u003eCompatible with Ford and ROUSH active exhaust systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonators for a noticeably more aggressive exhaust sound\u003c\/li\u003e\n\u003cli\u003eReduces back pressure and improves exhaust flow through the mid-pipe section\u003c\/li\u003e\n\u003cli\u003eMandrel-bent stainless steel tubing for consistent flow and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eEngineered from OEM CAD data for a direct fit with no modifications\u003c\/li\u003e\n\u003cli\u003eRetains compatibility with Ford factory active exhaust and ROUSH active exhaust systems\u003c\/li\u003e\n\u003cli\u003eReduces weight compared to the stock assembly\u003c\/li\u003e\n\u003cli\u003eCovered by a ROUSH 3-Year Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT (5.0L), Fastback \u0026amp; Convertible\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eROUSH Resonator Delete X-Pipe assembly\u003c\/li\u003e\n\u003cli\u003eAll necessary installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eROUSH 3-Year Limited Warranty\u003c\/p\u003e","brand":"Roush","offers":[{"title":"Default Title","offer_id":68304937517241,"sku":"RSH422046","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/rsh-422046_1_big.jpg?v=1794436044"},{"product_id":"kooks-2015-2026-ford-mustang-5-0l-v8-oem-resonator-delete-h-pipe-kit-11513500","title":"Kooks 2015-2026 Ford Mustang 5.0L V8 OEM Resonator Delete H-Pipe Kit - 11513500","description":"\u003cp\u003eThe Kooks 11513500 is an H-pipe resonator delete kit for the 5.0L V8 Mustang. It takes the place of the factory resonator in the mid-pipe section of the exhaust. The kit is listed in a 2-1\/4\" x 3\" x 2-1\/2\" configuration and is built to mate with the stock exhaust components on both ends: the OEM headers at the front and the OEM exhaust at the rear.\u003c\/p\u003e\n\u003cp\u003eThis part suits owners of 2015 and later 5.0L Mustangs who want to remove the factory resonator without replacing the rest of the exhaust. It fits between factory parts, and Kooks supplies the midpipe adapters and clamps needed to install it. Kooks says the part is handcrafted in the USA by a family-owned company with a long history in headers and exhaust systems.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH-pipe resonator delete design that replaces the factory resonator\u003c\/li\u003e\n\u003cli\u003eListed configuration: 2-1\/4\" x 3\" x 2-1\/2\"\u003c\/li\u003e\n\u003cli\u003eIncludes a 2-1\/4\" x 3\" H-pipe\u003c\/li\u003e\n\u003cli\u003eMidpipe adapters included\u003c\/li\u003e\n\u003cli\u003eClamps necessary for installation included\u003c\/li\u003e\n\u003cli\u003eConnects to OEM headers and OEM exhaust\u003c\/li\u003e\n\u003cli\u003eDesigned for 2015-2026 Mustang 5.0L V8 applications\u003c\/li\u003e\n\u003cli\u003eKooks part number 11513500\u003c\/li\u003e\n\u003cli\u003eHandcrafted in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHandcrafted in the USA by Kooks\u003c\/h3\u003e\u003cp\u003eKooks states that all of its products are handcrafted in the USA. The company describes itself as family owned and independently operated, now under a third generation of family leadership. It traces its history in headers and exhaust back to 1962.\u003c\/p\u003e\u003cp\u003eThe manufacturer says it has won championships and set records across many racing organizations, including NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, and SCCA. Kooks reports that its Statesville, North Carolina facility opened in July 2009 and covers 45,000 square feet on more than 11 acres of property.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the factory resonator in the mid-pipe section\u003c\/li\u003e\n\u003cli\u003eConnects to the OEM headers and the OEM exhaust\u003c\/li\u003e\n\u003cli\u003eMidpipe adapters and the clamps necessary for installation are included in the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator from the 5.0L Mustang exhaust and puts a Kooks H-pipe in its place\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the stock headers and stock rear exhaust, so the rest of the system can stay in place\u003c\/li\u003e\n\u003cli\u003eComes with the midpipe adapters and clamps needed for installation\u003c\/li\u003e\n\u003cli\u003eBuilt by an American manufacturer that handcrafts its headers and exhaust products in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang (5.0L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2-1\/4\" x 3\" H-Pipe\u003c\/li\u003e\n\u003cli\u003eMidpipe adapters\u003c\/li\u003e\n\u003cli\u003eClamps necessary for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68305044766905,"sku":"KSH11513500","price":347.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/2168a90554aec4f78bbb56c508780471_6d92ea9f-a0a6-406c-9e22-3933154ad236.png?v=1794376848"},{"product_id":"corsa-performance-3-stainless-double-hh-pipe-2015-2020-5-2l-shelby-gt350-21084","title":"Corsa Performance 3\" Stainless Double HH-Pipe (2015-2020 5.2L Shelby GT350) - 21084","description":"\u003cp\u003eThe Corsa Performance 21084 is a 3-inch stainless steel Double HH-Pipe built for the 5.2L V8 in the 2015-2020 Shelby GT350. It mounts in the mid-pipe position of the exhaust system and is designed to be paired with the rest of the exhaust as part of a complete Corsa setup. It gives GT350 owners a way to change how the Voodoo V8 sounds and breathes without cutting or welding.\u003c\/p\u003e\n\u003cp\u003eThe goal is a more aggressive exhaust note under acceleration and a pronounced rumble at idle, while avoiding drone at cruising speed. Corsa estimates a 23.43% increase in flow, and the pipe bolts in with the supplied hardware and instructions. For owners who already run a Corsa axle-back, or plan to, this HH-Pipe adds sound and flow through the middle of the system without sacrificing highway comfort.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch Double HH-Pipe configuration for the mid-pipe section of the exhaust\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction\u003c\/li\u003e\n\u003cli\u003eCorsa part number 21084\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the 2015-2020 Shelby GT350 5.2L V8\u003c\/li\u003e\n\u003cli\u003eEstimated 23.43% increase in exhaust flow (manufacturer estimate; actual results may vary)\u003c\/li\u003e\n\u003cli\u003eAggressive exhaust note through the gears with a distinct rumble at idle\u003c\/li\u003e\n\u003cli\u003eDesigned to produce no drone at cruising speed\u003c\/li\u003e\n\u003cli\u003eRaises sound output by one level when paired with Corsa axle-back exhaust systems\u003c\/li\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eIncludes the necessary hardware and detailed instructions\u003c\/li\u003e\n\u003cli\u003eDesigned, engineered and manufactured by Corsa in Berea, Ohio\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePremium Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eCorsa builds this HH-Pipe from premium stainless steel, which the company selects for its performance, appearance and contribution to the exhaust's sound. The 3-inch tubing is laid out in a Double HH configuration and sized for the GT350's 5.2L V8.\u003c\/p\u003e\u003cp\u003eEvery part of the product is designed, engineered and manufactured in Corsa's facility in Berea, Ohio. Corsa builds each of its exhaust products for specific vehicles to ensure correct fitment and performance, and it does not recommend or support using them on vehicles other than those listed.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eCorsa tuned this HH-Pipe to give the GT350 an aggressive, high-performance note through each gear and a distinct rumble at idle. It is also designed to avoid drone at cruising speed, so the extra volume comes without the cabin noise that tends to wear on you during long highway drives.\u003c\/p\u003e\u003cp\u003eIf you run a Corsa axle-back system, adding this HH-Pipe steps the sound up by one level over the axle-back alone. Corsa also estimates a 23.43% increase in exhaust flow compared to the stock configuration, though actual results may vary.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on installation with no welding required\u003c\/li\u003e\n\u003cli\u003eThe manufacturer describes installation as fast and easy\u003c\/li\u003e\n\u003cli\u003eNecessary hardware and detailed instructions are included with the kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a more aggressive sound and a stronger idle rumble to the GT350's 5.2L V8\u003c\/li\u003e\n\u003cli\u003eDesigned to avoid drone at cruising speed for comfortable highway driving\u003c\/li\u003e\n\u003cli\u003eTakes a Corsa axle-back system up one sound level\u003c\/li\u003e\n\u003cli\u003eEstimated 23.43% flow increase through the mid-pipe section\u003c\/li\u003e\n\u003cli\u003eBolts in without welding, using the hardware and instructions in the box\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel construction, backed by Corsa's limited lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2020 Ford Mustang GT350 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch stainless steel Double HH-Pipe\u003c\/li\u003e\n\u003cli\u003eNecessary installation hardware\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eCorsa limited lifetime warranty, valid with proof of purchase for as long as you own the vehicle. The exhaust must be installed on the specified vehicle for the warranty to remain valid.\u003c\/p\u003e","brand":"Corsa Performance","offers":[{"title":"Default Title","offer_id":68305053810873,"sku":"COR21084","price":674.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/hh_pipe.jpg?v=1794436062"},{"product_id":"mbrp-2-5-inch-h-pipe-resonator-bypass-t409-2015-2026-ford-mustang-s7283409","title":"MBRP 2.5-Inch H-Pipe Resonator Bypass T409. (2015-2026 Ford Mustang) - S7283409","description":"\u003cp\u003eThe MBRP S7283409 is a 2.5-inch H-pipe that takes the place of the factory resonated mid-pipe section on 2015-2026 Ford Mustang models. It is part of MBRP's ARMOR PLUS Series and is built from T409 stainless steel. It removes the resonators from the exhaust path and adds an H-style crossover between the two banks, with mandrel bent tubing used throughout to keep flow smooth.\u003c\/p\u003e\n\u003cp\u003eThis part suits Mustang owners who want a sharper exhaust tone and a less restrictive mid-pipe without moving to a full system. MBRP pairs the T409 construction with a lifetime warranty, and clamps are included for installation. The manufacturer also positions its exhaust products as a base for other bolt-on upgrades such as cold air intakes and programmers.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.5-inch tubing diameter\u003c\/li\u003e\n\u003cli\u003eH-pipe layout with resonator bypass design\u003c\/li\u003e\n\u003cli\u003eT409 stainless steel construction\u003c\/li\u003e\n\u003cli\u003ePart of the MBRP ARMOR PLUS Series\u003c\/li\u003e\n\u003cli\u003eMandrel bent tubing with no rippling in the bends\u003c\/li\u003e\n\u003cli\u003eLaser cut MBRP logo\u003c\/li\u003e\n\u003cli\u003eImproved exhaust tone compared to the resonated setup\u003c\/li\u003e\n\u003cli\u003eClamps included\u003c\/li\u003e\n\u003cli\u003eDeveloped with testing on MBRP's in-house Mustang 1100 AWD-SE chassis dynamometer, plus road and track mileage\u003c\/li\u003e\n\u003cli\u003eMBRP part number S7283409\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT409 Stainless Steel ARMOR PLUS Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds its ARMOR PLUS Series components from T409 stainless steel. The company describes this as a value-oriented, corrosion-resistant material that holds up against penetrating rust, and notes that the tubing is easy to keep clean. MBRP says T409 is well suited to drivers who don't see much precipitation or road salt.\u003c\/p\u003e\u003cp\u003eMBRP is clear about the limits of T409. Winter conditions, heavy salt air, and road treatments can speed up corrosion. The manufacturer's warranty does not cover that kind of corrosion unless the part or system fails completely. Owners in harsh winter climates should keep this in mind.\u003c\/p\u003e\u003cp\u003eEvery tube is mandrel bent, so the bends keep a consistent diameter without the rippling or crimping that can restrict flow. The pipe carries a laser cut MBRP logo.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eMandrel bending keeps the full tube diameter through each bend, which MBRP says lets exhaust leave the engine more efficiently. The manufacturer links better exhaust flow to more fresh air reaching the cylinders, which supports power output, performance, and engine longevity. MBRP does not publish specific horsepower or torque figures for this part.\u003c\/p\u003e\u003cp\u003eRemoving the resonators and adding an H-pipe crossover changes the exhaust note. MBRP describes the result as an improved exhaust tone. The company says its exhaust products are developed through dyno sessions on its in-house Mustang 1100 AWD-SE chassis dynamometer and through road and track testing, with an emphasis on minimal bend angles to clear exhaust quickly.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonators for a more pronounced exhaust tone\u003c\/li\u003e\n\u003cli\u003eAdds an H-pipe crossover in a 2.5-inch tube diameter\u003c\/li\u003e\n\u003cli\u003eMandrel bent tubing supports smooth exhaust flow through the mid-pipe\u003c\/li\u003e\n\u003cli\u003eT409 stainless steel resists penetrating rust in moderate climates\u003c\/li\u003e\n\u003cli\u003eComes with the clamps needed to connect it\u003c\/li\u003e\n\u003cli\u003eBacked by MBRP's lifetime warranty, subject to the corrosion exclusions stated by the manufacturer\u003c\/li\u003e\n\u003cli\u003eWorks as a foundation for other bolt-on upgrades such as intakes and tuners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2.5-inch T409 stainless steel H-pipe resonator bypass\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP backs ARMOR PLUS Series exhaust components with a lifetime warranty. Corrosion that is accelerated by winter conditions, heavy salt air, or road treatments is not covered unless the part or system fails completely.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305171644601,"sku":"MBRPS7283409","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_c100574e-8250-415e-8227-d94ddacb060c.webp?v=1794435521"},{"product_id":"steeda-304-stainless-resonator-delete-h-pipe-2015-2020-shelby-gt350-555-3621","title":"Steeda 304 Stainless Resonator Delete H-Pipe (2015-2020 Shelby GT350) - 555-3621","description":"\u003cp\u003eThe Steeda 555-3621 is a resonator delete H-pipe built for the Shelby GT350 and its 5.2L flat-plane crank Voodoo V8. It takes the place of the section of factory exhaust that sits downstream of the catalytic converters and ahead of the axle-back, removing the stock resonators and substituting an H-style crossover made from T304 stainless steel. Steeda's goal with this part is to move the GT350's exhaust note away from the sharper character of the factory and aftermarket X-pipe layouts and toward a deeper, more traditional muscle car tone.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturer-stated gains:\u003c\/strong\u003e Steeda states a gain of up to +6 hp and 4 lb-ft of torque. The manufacturer does not specify the test conditions for these figures.\u003c\/p\u003e\n\u003cp\u003eFor GT350 owners who want a different sound, somewhat better exhaust flow, and a little more low-end response, this H-pipe offers a simple clamp-on approach. Steeda states that it requires no tune and no welding, and because it is secured with clamps, the factory resonator can be reinstalled later if you decide to return the car to its original configuration. The stainless construction draws on design and manufacturing methods from Steeda's established GT X-pipe and H-pipe line.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete H-pipe designed for the 5.2L flat-plane crank Voodoo V8 in the Shelby GT350\u003c\/li\u003e\n\u003cli\u003eMade from T304 stainless steel\u003c\/li\u003e\n\u003cli\u003e30.75 in. overall length\u003c\/li\u003e\n\u003cli\u003eBand clamps let the pipe be cut down to a shorter length\u003c\/li\u003e\n\u003cli\u003eInstalls without welding, using a pair of flush-fit exhaust clamps\u003c\/li\u003e\n\u003cli\u003eNo tune required, according to Steeda\u003c\/li\u003e\n\u003cli\u003eRemoves the factory resonators to reduce exhaust restriction and weight\u003c\/li\u003e\n\u003cli\u003eReplaces the exhaust section between the catalytic converters and the axle-back\u003c\/li\u003e\n\u003cli\u003eIntended to improve low-end torque compared with the factory resonator\u003c\/li\u003e\n\u003cli\u003eAllows a return to the factory resonator using the supplied clamps\u003c\/li\u003e\n\u003cli\u003eIncorporates design and manufacturing elements from Steeda's GT X-pipe and H-pipe products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eSteeda builds this H-pipe from T304 stainless steel, a material chosen for its resistance to rust and corrosion over the long term. Steeda positions it as a clear step up from exhaust components made of T409 stainless or aluminized steel, which can corrode and eventually develop holes as they age.\u003c\/p\u003e\u003cp\u003eOwners should expect that heat from the exhaust can cause the 304 stainless to discolor over time. This is a cosmetic change only and does not affect the pipe's resistance to rusting through. The part also benefits from construction and design approaches Steeda carried over from its GT-series X-pipes and H-pipes, with the intent that it will hold up for as long as you own the car.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eSound is the main reason to choose this part. Steeda describes the H-pipe layout as giving the GT350 a lower, heavier rumble at idle and a more aggressive growl under acceleration. By comparison, the manufacturer characterizes both the stock and aftermarket X-pipe setups on this car as producing a thinner, raspier note. With the resonators removed, overall exhaust volume also goes up slightly.\u003c\/p\u003e\u003cp\u003eBeyond the sound, deleting the resonators lets exhaust gases leave the Voodoo engine with less restriction and takes some weight out of the system. H-pipe designs are generally associated with gains in low-end power and torque, whereas X-pipes tend to favor higher rpm performance. Steeda presents this H-pipe as a way to add some low-end response to the GT350 compared with the factory resonator.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNo welding is required; the H-pipe is held in position by two flush-fit exhaust clamps\u003c\/li\u003e\n\u003cli\u003eRemoving the factory resonator requires taking off the heat shield and cutting the exhaust\u003c\/li\u003e\n\u003cli\u003eThe band clamps allow the H-pipe to be trimmed to a shorter length if needed\u003c\/li\u003e\n\u003cli\u003eNo tune is required, according to Steeda\u003c\/li\u003e\n\u003cli\u003eThe included exhaust clamps can be used to put the factory resonator back on if you want to return to stock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want the GT350 to have a deeper, more traditional muscle car exhaust tone in place of the raspier X-pipe character\u003c\/li\u003e\n\u003cli\u003eYou want to add some low-end torque compared with the factory resonator\u003c\/li\u003e\n\u003cli\u003eT304 stainless steel construction resists the rust and corrosion that can affect T409 or aluminized steel exhausts\u003c\/li\u003e\n\u003cli\u003eClamp-on installation without welding and with no tune required keeps the project simple\u003c\/li\u003e\n\u003cli\u003eThe modification can be reversed, since the factory resonator can be refitted using the included clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2020 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSteeda T304 stainless steel resonator delete H-pipe\u003c\/li\u003e\n\u003cli\u003eExhaust clamps (pair of flush-fit clamps)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Steeda","offers":[{"title":"Default Title","offer_id":68305202577593,"sku":"SDA-555-3621","price":304.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/555-3621-v2-1__59737.1681300020_1.jpg?v=1794436072"},{"product_id":"ford-performance-2015-2018-ford-mustang-gt-x-pipe-with-high-flow-design-50-state-legal","title":"Ford Performance 2015-2018 Ford Mustang GT X-Pipe with High-Flow Design (50-State Legal)","description":"\u003cp\u003eThis Ford Performance X-Pipe replaces the resonator section of the factory mid-pipe on the Mustang GT with an X crossover. It is a cut-and-clamp design built from 2.75 inch mandrel-bent T-409 stainless steel tubing, and it works with the factory catalytic converters already on the car.\u003c\/p\u003e\n\u003cp\u003eFord's stock catalytic converters work well, but the factory resonator mid-pipe leaves room for improvement. The X crossover balances exhaust gas pressure between the two banks. The result is better flow and a louder, raspier exhaust note with a race-car character. For owners of Coyote 5.0L DOHC V8-powered Mustang GTs, it is a straightforward way to change the sound and flow of the exhaust while keeping the factory converters in place.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConverts the factory resonator mid-pipe into an X-pipe configuration\u003c\/li\u003e\n\u003cli\u003eX crossover design that balances exhaust gas pressure across the system\u003c\/li\u003e\n\u003cli\u003eImproved exhaust flow and a loud, raspy, race-car-style exhaust note\u003c\/li\u003e\n\u003cli\u003e2.75 inch diameter mandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eT-409 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eCut-and-clamp installation that reuses the stock clamps\u003c\/li\u003e\n\u003cli\u003eRetains the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eDesigned for Mustang GT models with the Coyote 5.0L DOHC V8 engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent T-409 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eThe X-Pipe is made from 2.75 inch diameter T-409 stainless steel tubing. Ford Performance specifies this material for durability in the exhaust system.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, which keeps the pipe at its full diameter through each bend. This supports the free-flowing design and avoids the restrictions that crimped bends can create.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe factory resonator mid-pipe is the main area this part addresses. Swapping the resonator for an X crossover balances exhaust gas pressure between the two sides of the system, which Ford Performance states improves exhaust flow and adds power.\u003c\/p\u003e\u003cp\u003eThe modern X crossover also changes the character of the exhaust. The result is a loud, raspy growl in the manner of a race car, noticeably more aggressive than the stock resonator setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation uses a cut-and-clamp method: the factory mid-pipe resonator section is cut out and removed.\u003c\/li\u003e\n\u003cli\u003eThe X-Pipe clamps into place using the stock clamps.\u003c\/li\u003e\n\u003cli\u003eThe factory catalytic converters are reused and stay in the system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator section, which Ford Performance identifies as the area of the stock mid-pipe that can be improved\u003c\/li\u003e\n\u003cli\u003eAdds a louder, raspier exhaust tone through the X crossover design\u003c\/li\u003e\n\u003cli\u003eKeeps the factory catalytic converters, so you do not need to buy replacement converters\u003c\/li\u003e\n\u003cli\u003eBuilt from 2.75 inch mandrel-bent T-409 stainless steel tubing for durability\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for the Coyote 5.0L DOHC V8 Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2018 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68305437524153,"sku":"FRPM-5251-M8","price":299.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/M-5251-M8_3.jpg?v=1794436094"},{"product_id":"mbrp-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-t-409-construction-2-5-diameter","title":"MBRP 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with T-409 Construction (2.5\" Diameter)","description":"\u003cp\u003eThe MBRP XP Series Resonator Delete X-Pipe is a mid-pipe section for the 5.0L Mustang GT and Bullitt. It takes the place of the factory resonator assembly in the exhaust system and works with the original catalytic converters, which remain in place. It covers both the S550 and S650 generations, so owners of either platform can use the same part to change how their exhaust sounds.\u003c\/p\u003e\n\u003cp\u003eThe factory resonator is there to quiet the exhaust, and MBRP notes that it also adds restriction and weight. Removing it lets more of the Coyote V8's sound come through. The X-pipe crossover balances pressure between the left and right banks, which MBRP says helps horsepower and gives a deeper, fuller tone. The pipe is made from 409 stainless steel with 2-1\/2 inch mandrel-bent tubing and bolts into place using clamps. It suits owners who want a more aggressive exhaust note without removing their catalytic converters.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePart of the MBRP XP Series\u003c\/li\u003e\n\u003cli\u003eResonator delete design that replaces the factory resonator\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover that balances exhaust pressure between the two banks\u003c\/li\u003e\n\u003cli\u003eMade from T-409 (409) stainless steel for corrosion resistance\u003c\/li\u003e\n\u003cli\u003e2-1\/2 inch (2.5 inch) diameter mandrel-bent piping\u003c\/li\u003e\n\u003cli\u003eReuses the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eBolt-in installation using clamps\u003c\/li\u003e\n\u003cli\u003eLighter than the factory resonator assembly, according to MBRP\u003c\/li\u003e\n\u003cli\u003eDesigned for S550 and S650 Mustang GT and Bullitt models with the 5.0L engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e409 Stainless Steel, Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eMBRP builds this X-pipe from 409 stainless steel, also listed as T-409, which is chosen for long-term corrosion resistance. That matters for a part mounted under the car, where it is exposed to road spray, moisture, and heat cycling.\u003c\/p\u003e\u003cp\u003eThe 2-1\/2 inch tubing is mandrel bent, so the pipe keeps a consistent inside diameter through each bend instead of narrowing where it is crimped. MBRP specifies this to help flow move efficiently through the system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eWith the factory resonator removed, more of the 5.0L V8's exhaust note reaches the tailpipes. MBRP says the stock resonator keeps the S550 and S650 quiet and restricts flow. Deleting it is meant to make the engine's sound and character more noticeable from the driver's seat.\u003c\/p\u003e\u003cp\u003eThe X-pipe junction lets exhaust pulses from each cylinder bank cross over and balance pressure between the two pipes. MBRP credits this with improving horsepower and giving a deeper, more powerful tone. The manufacturer does not publish specific power figures.\u003c\/p\u003e\u003cp\u003eMBRP describes the part as lightweight compared with the heavier factory resonator it replaces.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-in design that installs with clamps\u003c\/li\u003e\n\u003cli\u003eUses the factory catalytic converters, which stay in place\u003c\/li\u003e\n\u003cli\u003eMBRP describes installation as fast and easy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator to bring out more of the 5.0L V8's exhaust sound\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover balances pressure between banks for a deeper tone\u003c\/li\u003e\n\u003cli\u003e409 stainless steel resists corrosion for long-term use under the car\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 2-1\/2 inch tubing supports efficient exhaust flow\u003c\/li\u003e\n\u003cli\u003eKeeps the factory catalytic converters in the system\u003c\/li\u003e\n\u003cli\u003eBolt-in, clamp-on installation with no permanent changes to the factory converters\u003c\/li\u003e\n\u003cli\u003eCovered by MBRP's lifetime warranty against defects in materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang Bullitt \/ GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP lifetime warranty covering defects in materials and workmanship.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305438474425,"sku":"MBRPS7213409","price":219.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_f16569c0-98a5-434e-89af-d45f10a43081.webp?v=1794435533"},{"product_id":"mbrp-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-2-5-aluminum-construction-s7213al","title":"MBRP 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with 2.5\" Aluminum Construction (S7213AL)","description":"\u003cp\u003eThe MBRP S7213AL is a resonator delete X-pipe from MBRP's Installer Series, built for S550 and S650 Mustang GT and Bullitt owners who want a more open exhaust note without paying for a stainless steel system. It takes the place of the heavy factory resonator assembly in the mid-section of the exhaust and uses 2-1\/2 inch mandrel-bent aluminized steel tubing joined by an X-pipe crossover.\u003c\/p\u003e\n\u003cp\u003eMBRP describes the factory resonator as both quiet and restrictive, muting the sound of the 5.0L V8. Removing it and adding an X-pipe crossover is meant to produce a deeper, more aggressive tone while improving flow. The design keeps your factory catalytic converters in place, and the bolt-in, clamp-together layout suits enthusiasts who handle their own exhaust work. MBRP backs the part with a lifetime warranty against manufacturing defects.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMBRP Installer Series resonator delete, part number S7213AL\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover that MBRP says balances pressure between the left and right exhaust banks\u003c\/li\u003e\n\u003cli\u003e2-1\/2 inch mandrel-bent tubing for more efficient exhaust flow\u003c\/li\u003e\n\u003cli\u003eAluminized steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eLightweight replacement for the heavy factory resonator\u003c\/li\u003e\n\u003cli\u003eRetains the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eBolt-in design that installs with clamps\u003c\/li\u003e\n\u003cli\u003eIntended for S550 and S650 Mustangs with the 5.0L V8\u003c\/li\u003e\n\u003cli\u003eMBRP lifetime warranty covering defects in materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAluminized Steel, 2-1\/2 Inch Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eThe S7213AL is part of MBRP's Installer Series, a line positioned as a lower-cost alternative to stainless steel kits while targeting comparable performance. The tubing is aluminized steel, which MBRP specifies for long-term corrosion resistance.\u003c\/p\u003e\u003cp\u003eThe piping is 2-1\/2 inch diameter and mandrel bent, so the tube keeps a consistent cross-section through each bend instead of crimping or narrowing. MBRP says this helps the exhaust flow more efficiently and supports performance.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory resonator removes a component that MBRP calls a source of both sound damping and restriction. The result is a louder, more pronounced exhaust note from the 5.0L V8.\u003c\/p\u003e\u003cp\u003eThe X-pipe crossover lets exhaust pulses from each bank interact and equalize pressure between the two pipes. MBRP credits this design with improving horsepower and producing a deeper, more powerful tone. The manufacturer does not publish specific gain figures.\u003c\/p\u003e\u003cp\u003eSwapping the heavy stock resonator for this lighter pipe assembly also cuts some weight from the exhaust system, though MBRP does not state an exact figure.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-in application that installs with clamps\u003c\/li\u003e\n\u003cli\u003eReplaces the factory resonator assembly\u003c\/li\u003e\n\u003cli\u003eReuses the factory catalytic converters\u003c\/li\u003e\n\u003cli\u003eMBRP describes installation as fast and easy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator, which MBRP identifies as a restriction that mutes the 5.0L V8\u003c\/li\u003e\n\u003cli\u003eAdds an X-pipe crossover for a deeper exhaust tone and balanced pressure between banks\u003c\/li\u003e\n\u003cli\u003eUses 2-1\/2 inch mandrel-bent tubing for more efficient flow\u003c\/li\u003e\n\u003cli\u003eAluminized steel offers corrosion resistance at a lower cost than stainless steel kits\u003c\/li\u003e\n\u003cli\u003eKeeps the factory catalytic converters in place\u003c\/li\u003e\n\u003cli\u003eBolt-in, clamp-together design suits home installation\u003c\/li\u003e\n\u003cli\u003eCovered by MBRP's lifetime warranty against defects in materials and workmanship\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang Bullitt \/ GT, Fastback \u0026amp; Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP lifetime warranty covering defects in materials and workmanship.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305440309433,"sku":"MBRPS7213AL","price":184.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_88779bc7-d8d7-42bc-99fb-2178561da5d6.webp?v=1794435536"},{"product_id":"borla-2018-2026-ford-mustang-gt-connection-pipes-with-resonator-mach-1-and-bullitt-compatible","title":"Borla 2018-2026 Ford Mustang GT Connection Pipes with Resonator (Mach 1 \u0026 Bullitt Compatible)","description":"\u003cp\u003eBorla part number 60661 is a resonator-equipped connection pipe assembly for the S550 Ford Mustang GT with the 5.0L V8. It occupies the section of the exhaust between the front of the system and the rear sections, and it places a resonator with an integrated internal H-pipe at that junction. Borla specifies it for use only as part of a Borla exhaust system, so it is a component for building or completing a Borla setup rather than a standalone universal part.\u003c\/p\u003e\n\u003cp\u003eThe assembly suits rear-wheel-drive, two-door Mustang GT coupes with either the automatic or manual transmission. It works on cars equipped with the factory Active Valve Performance Exhaust and on cars without it. Borla does not recommend it for convertibles. If you are assembling a Borla exhaust on a coupe and want a resonated connection section with built-in bank-to-bank crossover, this part is designed for that job.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla part number 60661\u003c\/li\u003e\n\u003cli\u003eConnection pipes with an integrated resonator\u003c\/li\u003e\n\u003cli\u003eInternal H-pipe built into the resonator\u003c\/li\u003e\n\u003cli\u003eCompatible with vehicles with or without the Active Valve Performance Exhaust\u003c\/li\u003e\n\u003cli\u003eSuitable for automatic and manual transmission cars\u003c\/li\u003e\n\u003cli\u003eDesigned for rear-wheel-drive, two-door Mustang GT 5.0L V8 models\u003c\/li\u003e\n\u003cli\u003eIntended for use only with Borla exhaust systems\u003c\/li\u003e\n\u003cli\u003eNot recommended for convertible models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eResonator with Integrated Internal H-Pipe\u003c\/h3\u003e\u003cp\u003eThe main design feature of this assembly is the internal H-pipe inside the resonator housing. Because the crossover is integrated into the resonator body, the connection section combines resonation and crossover in one component instead of using two separate pieces.\u003c\/p\u003e\u003cp\u003eBorla Performance Industries has focused on stainless steel performance exhaust for decades. The company started out building exhaust systems for concours-level classics from marques such as Rolls-Royce and Ferrari, and it later expanded into exhaust for modern street, off-road, and racing vehicles.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThis connection section is part of the Borla exhaust approach and is meant to contribute to the brand's characteristic exhaust note, which Borla calls its Sound of Power. Borla builds it to work within its own systems, so the resonator and internal H-pipe are matched to the other Borla components it pairs with.\u003c\/p\u003e\u003cp\u003eCompatibility with or without the Active Valve Performance Exhaust lets owners of valved and non-valved Mustang GT coupes use the same part in a Borla build.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla specifies this part for use only with Borla exhaust systems.\u003c\/li\u003e\n\u003cli\u003eBorla does not recommend this part for convertible models.\u003c\/li\u003e\n\u003cli\u003eThe part works on vehicles with or without the Active Valve Performance Exhaust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdds a resonator with an internal H-pipe to the connection section of a Borla exhaust system on a Mustang GT coupe\u003c\/li\u003e\n\u003cli\u003eCombines the crossover and the resonator in one assembly\u003c\/li\u003e\n\u003cli\u003eFits both Active Valve and non-valved exhaust-equipped cars\u003c\/li\u003e\n\u003cli\u003eWorks with either automatic or manual transmission Mustang GT models\u003c\/li\u003e\n\u003cli\u003eMatched to Borla components for owners building a complete Borla system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2023 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305568170169,"sku":"BOR60661","price":524.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60661-main-1-xlarge.jpg?v=1794430572"},{"product_id":"borla-t304-ss-h-pipe-2015-2026-ford-mustang-gt-2024-dark-horse-60752","title":"Borla T304 SS H-Pipe (2015-2026 Ford Mustang GT \/ 2024+ Dark Horse) - 60752","description":"\u003cp\u003eThe Borla 60752 is a T-304 stainless steel H-pipe built to take the place of the factory resonator on the 5.0L V8 Mustang. It fits in the mid-pipe section of the stock exhaust and adds a balance tube between the left and right banks. The pipe removes the OE resonator and joins the two sides of the exhaust in its place. It works with both automatic and manual transmission cars.\u003c\/p\u003e\n\u003cp\u003eBorla says the H-pipe evens out the exhaust pulses from each bank to improve performance and gives a sound that a crossover pipe of this type is known for. It is made from T-304 stainless with mandrel-bent tubing and CNC-controlled manufacturing for consistent fitment. It suits owners of Coyote-powered GT, Mach 1, and Dark Horse models who want a more aggressive exhaust note and a durable stainless replacement for the resonator. You can run it on its own or add other Borla components later.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the Original Equipment (O.E.) resonator only\u003c\/li\u003e\n\u003cli\u003eH-pipe design with a crossover balance tube that blends combustion pulses from both banks\u003c\/li\u003e\n\u003cli\u003eConstructed from T-304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for smooth, unrestricted flow\u003c\/li\u003e\n\u003cli\u003ePrecision CNC manufacturing for accurate fitment\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 33.2 in. long x 7.1 in. wide x 4.2 in. high\u003c\/li\u003e\n\u003cli\u003eInlets: 2.25 in. O.D.\u003c\/li\u003e\n\u003cli\u003ePipes: 2.75 in. O.D.\u003c\/li\u003e\n\u003cli\u003eOutlets: 2.5 in. I.D., angled slightly outward\u003c\/li\u003e\n\u003cli\u003eBorla logo laser etched on the balance tube\u003c\/li\u003e\n\u003cli\u003eCompatible with automatic and manual transmission vehicles\u003c\/li\u003e\n\u003cli\u003eCan be installed alone or combined with other Borla parts\u003c\/li\u003e\n\u003cli\u003eIncludes two 2.5 in. clamps\u003c\/li\u003e\n\u003cli\u003eBacked by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eT-304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eBorla builds this H-pipe from T-304 stainless steel. The manufacturer positions this alloy above T-400 series stainless such as 409 for both performance and durability.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, so the pipe keeps its full diameter through each bend instead of crimping or narrowing. Borla credits this with maximizing flow and power. CNC-controlled manufacturing keeps the dimensions consistent and helps the assembly line up accurately with the factory exhaust. The Borla logo is laser etched on the balance tube.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe crossover tube connects the left and right exhaust banks so the combustion pulses from each side of the V8 can merge. Borla states this produces improved performance.\u003c\/p\u003e\u003cp\u003eOn sound, Borla describes an aggressive, custom tone that it says only an H-pipe system can produce. Because the part removes the factory resonator, expect a change in the exhaust character compared with stock.\u003c\/p\u003e\u003cp\u003eThe outlets are 2.5 in. I.D. and angle slightly outward. The pipe can serve as a standalone upgrade or as one piece of a larger Borla exhaust setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces only the Original Equipment (O.E.) resonator\u003c\/li\u003e\n\u003cli\u003eInstallation requires cutting the O.E. exhaust\u003c\/li\u003e\n\u003cli\u003eCan be installed by itself or combined with other Borla exhaust components\u003c\/li\u003e\n\u003cli\u003eTwo 2.5 in. clamps are included for connecting the outlets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonator and adds an H-pipe crossover for a more aggressive exhaust tone\u003c\/li\u003e\n\u003cli\u003eBlends exhaust pulses between banks, which Borla states improves performance\u003c\/li\u003e\n\u003cli\u003eT-304 stainless construction for long-term corrosion resistance and durability\u003c\/li\u003e\n\u003cli\u003eMandrel bends preserve tube diameter for smooth exhaust flow\u003c\/li\u003e\n\u003cli\u003eCNC manufacturing for accurate fit with the factory exhaust\u003c\/li\u003e\n\u003cli\u003eWorks as a standalone upgrade or as part of a larger Borla system\u003c\/li\u003e\n\u003cli\u003eCovered by the Borla Million-Mile Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2025 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2021-2023 Ford Mustang Mach 1\u003c\/li\u003e\n\u003cli\u003e2024-2025 Ford Mustang Dark Horse (5.0L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla T-304 stainless steel H-pipe assembly\u003c\/li\u003e\n\u003cli\u003e2 x 2.5 in. clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eBorla Million-Mile Warranty\u003c\/p\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305578885305,"sku":"BOR60752","price":356.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60752-main-1-xlarge.jpg?v=1794430380"},{"product_id":"kooks-3-x-2-3-4-ss-off-road-race-only-x-pipe-2015-2019-shelby-gt350-retains-oem-mufflers-11543100","title":"Kooks 3\" x 2-3\/4\" SS Off-Road Race Only X-Pipe. 2015-2019 Shelby GT350. Retains OEM Mufflers. - 11543100","description":"\u003cp\u003eThe Kooks 11543100 is a stainless steel off-road X-pipe built for the 2015-2019 Shelby GT350. It is sized at 3 in x 2-3\/4 in and is designed to connect a Kooks header system to the car's factory rear exhaust. Its OEM-style outlet lets you keep the stock mufflers in place.\u003c\/p\u003e\n\u003cp\u003eThis X-pipe is a race-only component. It does not include catalytic converters, and it is intended for owners who are already running, or planning to run, Kooks headers on a track-focused GT350. Because the original mufflers stay in place, it suits builders who want to change the front half of the exhaust while keeping the factory rear section.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel X-pipe construction\u003c\/li\u003e\n\u003cli\u003e3 in x 2-3\/4 in sizing\u003c\/li\u003e\n\u003cli\u003eOEM outlet that mates to the stock exhaust\u003c\/li\u003e\n\u003cli\u003eRetains the factory mufflers\u003c\/li\u003e\n\u003cli\u003eOff-road design with no catalytic converters\u003c\/li\u003e\n\u003cli\u003eMust be paired with Kooks headers\u003c\/li\u003e\n\u003cli\u003eFactory exhaust must be cut during installation\u003c\/li\u003e\n\u003cli\u003eKooks part number 11543100\u003c\/li\u003e\n\u003cli\u003eNot legal for sale, installation, or use on licensed vehicles in California; not CARB compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Off-Road X-Pipe Construction\u003c\/h3\u003e\u003cp\u003eKooks builds this X-pipe from stainless steel. It uses 3 in tubing on the header side and an OEM outlet, listed as 2-3\/4 in, that connects to the factory GT350 exhaust. This allows the rest of the stock system, including the original mufflers, to remain on the car.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThis is a catless, off-road-only design, so it replaces the catalytic converter section of the factory system. It is engineered to work only with Kooks headers. Kooks does not publish horsepower, torque, or sound figures for this part.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe factory exhaust must be cut to fit this X-pipe\u003c\/li\u003e\n\u003cli\u003eKooks headers are required; this X-pipe is designed specifically to work with them\u003c\/li\u003e\n\u003cli\u003eThe OEM outlet connects to the stock exhaust, and the factory mufflers are retained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou are running Kooks headers on a GT350 and need a matching X-pipe to connect them to the factory exhaust\u003c\/li\u003e\n\u003cli\u003eYou want to keep the stock mufflers while replacing the front section of the exhaust\u003c\/li\u003e\n\u003cli\u003eYou are building a dedicated off-road or race car where a catless X-pipe is permitted\u003c\/li\u003e\n\u003cli\u003eYou want a stainless steel mid-section for the system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2019 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68305683284153,"sku":"KOO-11543100","price":1810.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/cae06c7c49560908480afe91fc3ef732_0a14492f-1a9a-4156-a41a-571f9c6ef988.png?v=1794379361"},{"product_id":"mbrp-s7215409-2015-2021-shelby-gt350-t409-3-resonator-delete-pipe","title":"MBRP S7215409 2015-2021 Shelby GT350 T409 3\" Resonator Delete Pipe","description":"\u003cp\u003eThe MBRP S7215409 is a 3-inch resonator delete pipe built from T409 stainless steel for the Ford Mustang Shelby GT350. It replaces the factory resonators with straight sections of tubing. The goal is to bring out more of the exhaust note from the GT350's engine while keeping the rest of the exhaust layout intact.\u003c\/p\u003e\n\u003cp\u003eFor GT350 owners who want a louder, more pronounced exhaust tone without replacing the entire system, this pipe is a direct approach. It is a bolt-on, no-weld design that mounts to the factory hangers. MBRP builds its T409 XP Series parts to stand up to road salt, rocks, tar, and grime, and backs that series with a lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3-inch diameter tubing\u003c\/li\u003e\n\u003cli\u003eT409 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eSixteen-gauge T409 material, per MBRP's XP Series description\u003c\/li\u003e\n\u003cli\u003eEliminates the factory resonators\u003c\/li\u003e\n\u003cli\u003eIncreases exhaust tone\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing with minimal bend angles, per MBRP\u003c\/li\u003e\n\u003cli\u003eBolt-on design with no welding required\u003c\/li\u003e\n\u003cli\u003eDirect fit to the OEM hangers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSixteen-Gauge T409 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMBRP makes this resonator delete from 3-inch T409 stainless steel. The company describes its XP Series material as sixteen-gauge T409, chosen for drivers whose cars see harsh road conditions. MBRP says it holds up to salt, rocks, tar, and road grime.\u003c\/p\u003e\u003cp\u003eMBRP states that its tubing is fully mandrel bent and uses minimal bend angles, so exhaust gases leave the system quickly. Over time, T409 can develop surface rust. Winter driving and road treatments can speed this up.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eRemoving the factory resonators is meant to increase exhaust tone, giving the GT350 a more noticeable sound. MBRP says it tunes its exhaust products for sound that stays civilized during normal driving and turns aggressive under throttle.\u003c\/p\u003e\u003cp\u003eMBRP reports that it develops its muscle car exhaust products on an in-house Mustang 1100 AWD-SE chassis dynamometer, along with on-road and track testing. The company positions its exhaust components as a foundation for other modifications such as cold air intakes, programmers, and tuners. MBRP does not publish specific horsepower or torque figures for this part.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBolt-on design, no welding required\u003c\/li\u003e\n\u003cli\u003eDirect fit to the OEM exhaust hangers\u003c\/li\u003e\n\u003cli\u003eMBRP estimates installation at one and a half to two hours (stated for its systems generally)\u003c\/li\u003e\n\u003cli\u003eMBRP states that the clamps and parts needed for installation are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory resonators to increase exhaust tone on a GT350\u003c\/li\u003e\n\u003cli\u003e3-inch T409 stainless steel construction for resistance to road salt, debris, and grime\u003c\/li\u003e\n\u003cli\u003eBolt-on, no-weld installation that uses the factory hangers\u003c\/li\u003e\n\u003cli\u003eCovered by MBRP's lifetime warranty on its XP Series (surface rust excluded)\u003c\/li\u003e\n\u003cli\u003eChanges the sound without requiring a full exhaust system replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2018 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eClamps and installation parts (per MBRP; no itemized list provided)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMBRP Lifetime Warranty on its XP Series. Surface rust that develops over time is not covered, and winter road conditions and road treatments may accelerate it.\u003c\/p\u003e","brand":"MBRP Exhaust","offers":[{"title":"Default Title","offer_id":68305690362041,"sku":"MBRPS7215409","price":294.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/unnamed_77bfa936-9547-4eda-97e5-1e9c5afec3ed.webp?v=1794435547"},{"product_id":"borla-connection-pipes-resonator-touring-2015-2017-mustang-60561","title":"Borla Connection Pipes - Resonator - Touring (2015-2017 Mustang) - 60561","description":"\u003cp\u003eBorla part number 60561 is a set of Touring resonator connection pipes for the 2015-2017 Ford Mustang GT with the 5.0L V8. This component is not a standalone exhaust upgrade. It is built specifically to work with a Borla exhaust system already on the car, adding a resonator section between existing Borla components.\u003c\/p\u003e\n\u003cp\u003eThe part suits S550 GT owners, including convertible owners, who already run Borla hardware and want to add a resonator using pipes engineered to mate with that system. Borla states that it will not work with exhaust systems from other manufacturers or with the factory Ford exhaust, so confirm that a compatible Borla system is installed before ordering.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBorla part number 60561\u003c\/li\u003e\n\u003cli\u003eTouring resonator connection pipes\u003c\/li\u003e\n\u003cli\u003eEngineered for 2015-2017 Mustang GT 5.0L V8 models, per the manufacturer listing\u003c\/li\u003e\n\u003cli\u003eListed for both automatic and manual transmission cars, rear-wheel drive, 2-door\u003c\/li\u003e\n\u003cli\u003eIntended only for vehicles already equipped with a Borla exhaust system\u003c\/li\u003e\n\u003cli\u003eNot compatible with competitor exhaust systems or the original equipment exhaust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEngineered to Integrate With Borla Exhaust Systems\u003c\/h3\u003e\u003cp\u003eBecause these pipes are designed around Borla's own exhaust layouts, they are meant to connect directly to existing Borla components rather than adapt to other brands. The manufacturer is explicit that compatibility is limited to Borla-equipped vehicles.\u003c\/p\u003e\u003cp\u003eBorla Performance Industries specializes in stainless steel performance exhaust. The company got its start roughly two decades before this listing was written, producing exhaust systems for collectible concours-grade Rolls-Royce and Ferrari automobiles, and has since expanded into exhaust for modern street, off-road, and racing vehicles.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe Touring designation places this part within Borla's Touring product line. Borla promotes its signature exhaust tone as the \"Sound of Power,\" and adding a resonator section is a way to shape how a compatible Borla system sounds on the Mustang GT's 5.0L V8.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eRequires an existing Borla exhaust system on the vehicle; the part will not connect to factory or other aftermarket exhaust systems\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou already run a Borla exhaust on a 2015-2017 Mustang GT and want to add a Touring resonator section\u003c\/li\u003e\n\u003cli\u003ePipes designed by the same manufacturer as your existing system, intended to connect to Borla components\u003c\/li\u003e\n\u003cli\u003eListed for both automatic and manual transmission GT models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2017 Ford Mustang GT (5.0L), Convertible\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDoes NOT Fit Competitors Or Original Equipment Systems\u003c\/li\u003e\u003c\/ul\u003e","brand":"Borla","offers":[{"title":"Default Title","offer_id":68305828118713,"sku":"BOR60561","price":534.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/60561-main-1-xlarge.jpg?v=1794430404"},{"product_id":"kooks-3-x-2-3-4-ss-oem-connection-adapter-2020-shelby-gt500-5-2l-11563000","title":"Kooks 3\" x 2-3\/4\" SS OEM Connection Adapter (2020+ Shelby GT500 5.2L) - 11563000","description":"\u003cp\u003eThe Kooks 11563000 is a 3 in. x 2-3\/4 in. OEM connection adapter made from 304 stainless steel for the 5.2L Shelby GT500, model year 2020 and newer. As the name indicates, it serves as a transition piece between two pipe sizes, 3 in. and 2-3\/4 in., where exhaust components meet the factory (OEM) connection on the GT500.\u003c\/p\u003e\n\u003cp\u003eFor GT500 owners building or reworking an exhaust system with Kooks components, this adapter handles the size change at the OEM connection point. Kooks states it has been manufacturing exhaust components for automotive enthusiasts for more than 50 years, and this piece carries the brand's part number 11563000 for straightforward identification when planning a build.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: Kooks 11563000\u003c\/li\u003e\n\u003cli\u003eAdapter sizing listed as 3 in. x 2-3\/4 in.\u003c\/li\u003e\n\u003cli\u003eBuilt from 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eStainless steel finish\u003c\/li\u003e\n\u003cli\u003eListed tube diameter: 2.000 in.\u003c\/li\u003e\n\u003cli\u003eDesigned as an OEM connection adapter for the 2020+ 5.2L Shelby GT500\u003c\/li\u003e\n\u003cli\u003eAutomotive application\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eKooks builds this connection adapter from 304 stainless steel and leaves it in a natural stainless steel finish. The part comes from a manufacturer that cites more than 50 years of producing exhaust components for enthusiasts.\u003c\/p\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIt provides a dedicated 3 in. to 2-3\/4 in. transition at the OEM connection on the 2020+ 5.2L Shelby GT500.\u003c\/li\u003e\n\u003cli\u003eIt is made from 304 stainless steel rather than a generic adapter material.\u003c\/li\u003e\n\u003cli\u003eIt is a Kooks part with a defined part number (11563000), which makes it easy to match to a Kooks GT500 exhaust or header build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2020-2026 Ford Mustang GT500 (5.2L)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68305835557049,"sku":"KOO-11563000","price":57.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/0f6968d2ad301b42d6d3924d660d74b6_491cacde-17de-48c2-a66f-cb1bc7ae743d.png?v=1794379724"},{"product_id":"mishimoto-2015-2018-ford-mustang-gt-h-pipe-resonator-delete-with-direct-fit-design-stainless-steel","title":"Mishimoto 2015-2018 Ford Mustang GT H-Pipe Resonator Delete with Direct-Fit Design (Stainless Steel)","description":"\u003cp\u003eThe Mishimoto H-Pipe Resonator Delete is a mid-pipe section for the Mustang GT that takes the place of the factory exhaust resonator. It is built entirely from 304 stainless steel with mandrel-bent tubing and TIG-welded joints. The goal is to open up the middle of the exhaust system for better flow and a more pronounced exhaust note.\u003c\/p\u003e\n\u003cp\u003eOwners who want more volume and a sharper tone from their Mustang GT's V8 without replacing the whole system will find this a practical upgrade. It works with both manual and automatic transmission cars, connects to either factory or aftermarket rear mufflers, and is backed by the Mishimoto Lifetime Warranty. Mishimoto suggests pairing it with its Mustang GT axle-back exhaust for the best overall exhaust performance.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete that replaces the factory exhaust resonator with a free-flowing crossover pipe section\u003c\/li\u003e\n\u003cli\u003eFull 304 stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for optimal exhaust flow\u003c\/li\u003e\n\u003cli\u003eTIG-welded construction\u003c\/li\u003e\n\u003cli\u003eCut-and-clamp, clamp-in installation designed for the 2015+ Mustang GT\u003c\/li\u003e\n\u003cli\u003eCompatible with stock or aftermarket rear mufflers\u003c\/li\u003e\n\u003cli\u003eFits both manual and automatic transmission vehicles\u003c\/li\u003e\n\u003cli\u003eAdditional sleeve-style exhaust clamps included for a secure connection\u003c\/li\u003e\n\u003cli\u003eProduces a more aggressive, higher-pitched tone under acceleration\u003c\/li\u003e\n\u003cli\u003eCovered by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eMishimoto builds this mid-pipe entirely from 304 stainless steel, which gives it a clean, finished look under the car. All of the tubing is mandrel-bent, so the pipe keeps its diameter through each bend. This helps the exhaust flow freely and avoids the restrictions that crimped bends can create.\u003c\/p\u003e\u003cp\u003eThe joints are TIG welded for a precise, consistent bead. The kit also includes extra sleeve-style exhaust clamps to make a dependable connection to the rest of the exhaust system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory resonator and replacing it with a free-flowing pipe section changes the character of the Mustang GT's exhaust. Mishimoto describes the result as more volume and a more aggressive, higher-pitched tone under acceleration.\u003c\/p\u003e\u003cp\u003eThe mandrel-bent stainless tubing is intended to provide optimal flow through the middle of the system. Because the pipe connects to either factory or aftermarket rear mufflers, you can adjust the final sound through your muffler choice. Mishimoto recommends its Mustang GT axle-back exhaust as a companion piece for maximum performance.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCut-and-clamp design developed specifically for the 2015+ Mustang GT\u003c\/li\u003e\n\u003cli\u003eClamp-in connection to stock or aftermarket rear mufflers using the included sleeve-style exhaust clamps\u003c\/li\u003e\n\u003cli\u003eSuitable for both manual and automatic transmission vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDelete the factory resonator to get more exhaust volume and a sharper tone under acceleration\u003c\/li\u003e\n\u003cli\u003e304 stainless steel, mandrel-bent, TIG-welded construction built for durability and appearance\u003c\/li\u003e\n\u003cli\u003eKeep your current rear mufflers or pair the pipe with aftermarket units\u003c\/li\u003e\n\u003cli\u003eWorks with manual and automatic transmission Mustang GT models\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2024 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eH-pipe resonator delete section\u003c\/li\u003e\n\u003cli\u003eSleeve-style exhaust clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMishimoto Lifetime Warranty\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68305993990329,"sku":"MISMMEXH-MUS8-15HP","price":339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/MMEXH-MUS8-15HP_1.jpg?v=1794436131"},{"product_id":"stainless-works-2018-2026-ford-mustang-gt-mid-resonator-delete-h-pipe-with-high-flow-design-direct-fit","title":"Stainless Works 2018-2026 Ford Mustang GT Mid-Resonator Delete H-Pipe with High-Flow Design (Direct-Fit)","description":"\u003cp\u003eThe Stainless Works Mid-Resonator Delete H-Pipe is a direct-fit crossover pipe for the 5.0L Mustang GT. It removes the factory middle resonator and puts a performance H-pipe in its place, so the car keeps a balanced crossover between the two banks without the restriction and sound damping of the stock resonator.\u003c\/p\u003e\n\u003cp\u003eStainless Works builds this H-pipe with smooth mandrel bends to keep exhaust flow moving efficiently and full TIG welding at the joints for strength and a clean finished look. It is designed for a clamp-in installation, and the clamps come in the box. That makes it a simple way for GT owners to change the exhaust note and support performance without welding or cutting new pipe, whether the car stays stock or is part of a larger exhaust build.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete that replaces the OEM middle resonator\u003c\/li\u003e\n\u003cli\u003eH-pipe crossover configuration\u003c\/li\u003e\n\u003cli\u003eDirect-fit design for the 5.0L Mustang GT\u003c\/li\u003e\n\u003cli\u003eSmooth mandrel bends to optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eFully TIG welded for strength and appearance\u003c\/li\u003e\n\u003cli\u003eClamp-in installation\u003c\/li\u003e\n\u003cli\u003eClamps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent, Fully TIG-Welded Construction\u003c\/h3\u003e\u003cp\u003eStainless Works forms this H-pipe with mandrel bends. Mandrel bending keeps the pipe's cross-section smooth and consistent through each curve, avoiding the crimped or flattened sections that can restrict flow.\u003c\/p\u003e\u003cp\u003eEvery joint is TIG welded. Stainless Works chose this method for the strength of the welds and for the clean, uniform bead it leaves on the finished part.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory middle resonator removes a component whose job is to quiet the exhaust. With the H-pipe in its place, the car gets a more pronounced exhaust sound, and Stainless Works describes the part as a way to improve both sound and power.\u003c\/p\u003e\u003cp\u003eThe H-pipe crossover links the two exhaust banks. The smooth mandrel bends are intended to help exhaust gases move through the mid-section of the system efficiently.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned for a clamp-in installation in place of the OEM middle resonator\u003c\/li\u003e\n\u003cli\u003eDirect-fit design\u003c\/li\u003e\n\u003cli\u003eRequired clamps are included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a more noticeable exhaust note from your 5.0L GT without changing the rest of the factory system\u003c\/li\u003e\n\u003cli\u003eYou prefer a clamp-in part that does not require welding to install\u003c\/li\u003e\n\u003cli\u003eYou want a mid-pipe with mandrel bends and full TIG welds instead of the factory resonator section\u003c\/li\u003e\n\u003cli\u003eYou are building the exhaust in stages and want a direct-fit H-pipe to start with or to add later\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete H-pipe\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68306070012089,"sku":"SSWM18RESDH","price":546.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/m18resdh-1-primary.jpg?v=1794436143"},{"product_id":"kooks-3-x-2-3-4-ss-green-catted-x-pipe-2015-2019-shelby-gt350-retains-oem-mufflers-11543300","title":"Kooks 3\" x 2-3\/4\" SS GREEN Catted X-Pipe. 2015-2019 Shelby GT350. Retains OEM Mufflers - 11543300","description":"\u003cp\u003eThe Kooks 11543300 is a stainless steel X-pipe for the Shelby GT350 with integrated Kooks GREEN catalytic converters. It uses a 3-inch inlet and a 2-3\/4-inch outlet sized to the factory connection, so it works with the stock rear exhaust and keeps the OEM mufflers in place. It is designed as part of a Kooks header system and must be paired with Kooks headers.\u003c\/p\u003e\n\u003cp\u003eThis X-pipe suits GT350 owners who are installing or have installed Kooks headers and want to keep catalytic converters in the system. The Kooks Ultra High Performance GREEN converters are EPA certified and 49-state legal. Retaining the factory mufflers lets owners complete a Kooks header and catted mid-section setup without replacing the rest of the exhaust. The part is not legal for sale, installation, or use on licensed vehicles in California and is not CARB compliant.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel X-pipe construction\u003c\/li\u003e\n\u003cli\u003e3-inch inlet by 2-3\/4-inch outlet (per product title)\u003c\/li\u003e\n\u003cli\u003eIntegrated Kooks Ultra High Performance GREEN catalytic converters\u003c\/li\u003e\n\u003cli\u003eConverters are EPA certified and 49-state legal\u003c\/li\u003e\n\u003cli\u003eOEM-style outlet for connection to the stock exhaust\u003c\/li\u003e\n\u003cli\u003eRetains the factory OEM mufflers\u003c\/li\u003e\n\u003cli\u003eDesigned for use with Kooks headers only\u003c\/li\u003e\n\u003cli\u003eManufacturer part number 11543300\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel X-Pipe with GREEN Catalytic Converters\u003c\/h3\u003e\u003cp\u003eKooks builds this X-pipe from stainless steel and integrates its own Ultra High Performance GREEN catalytic converters into the assembly. The converters carry EPA certification and are 49-state legal, so the system keeps emissions control hardware in place.\u003c\/p\u003e\u003cp\u003eThe 3-inch inlets are matched to Kooks headers, and the outlet uses factory sizing to connect to the stock exhaust. This lets the X-pipe slot into the GT350 system ahead of the original mufflers.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe factory exhaust must be cut to install this X-pipe.\u003c\/li\u003e\n\u003cli\u003eMust be used with Kooks headers; it is not intended for use with factory exhaust manifolds or other brands of headers.\u003c\/li\u003e\n\u003cli\u003eThe OEM-style outlet connects to the stock exhaust, and the factory mufflers are retained.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompletes a Kooks header installation on the Shelby GT350 with a matching X-pipe sized for the header outlets.\u003c\/li\u003e\n\u003cli\u003eKeeps catalytic converters in the exhaust using EPA certified, 49-state legal Kooks GREEN converters.\u003c\/li\u003e\n\u003cli\u003eWorks with the factory mufflers and stock rear exhaust, so no additional muffler or cat-back purchase is required.\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for an exhaust component that sits directly behind the headers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2019 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStainless steel X-pipe\u003c\/li\u003e\n\u003cli\u003eKooks Ultra High Performance GREEN catalytic converters (integrated)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68306104385721,"sku":"KSH11543300","price":2498.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/cae06c7c49560908480afe91fc3ef732_b6c551db-3fde-41aa-be8b-c25148c73ed8.png?v=1794380915"},{"product_id":"kooks-3-x-2-3-4-ss-catted-x-pipe-2015-2019-shelby-gt350-retains-oem-mufflers-11543200","title":"Kooks 3\" x 2-3\/4\" SS Catted X-Pipe. 2015-2019 Shelby GT350. Retains OEM Mufflers. - 11543200","description":"\u003cp\u003eThe Kooks 11543200 is a stainless steel catted X-pipe built for the 2015-2019 Shelby GT350. It uses 3 inch inlets and steps down to 2-3\/4 inch outlets that match the factory configuration, so it connects to the stock exhaust and keeps the original GT350 mufflers in place. Kooks tuner-style high-flow catalytic converters are built into the assembly.\u003c\/p\u003e\n\u003cp\u003eThis mid-pipe is the link between a set of Kooks headers and the factory rear exhaust. Owners who have installed or are planning Kooks headers get an X-pipe that keeps catalytic converters in the system and retains the stock mufflers, with no change to the rear section beyond what installation requires. It is a model-specific piece meant for GT350 owners finishing a Kooks header installation.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eKooks part number 11543200\u003c\/li\u003e\n\u003cli\u003eStainless steel X-pipe construction\u003c\/li\u003e\n\u003cli\u003e3 inch inlet diameter stepping to 2-3\/4 inch outlets\u003c\/li\u003e\n\u003cli\u003eKooks high-flow tuner catalytic converters built into the pipe\u003c\/li\u003e\n\u003cli\u003eOutlets sized to the factory exhaust so the stock system can be reused\u003c\/li\u003e\n\u003cli\u003eRetains the original equipment mufflers\u003c\/li\u003e\n\u003cli\u003eDesigned to pair with Kooks headers\u003c\/li\u003e\n\u003cli\u003eSpecific to the 2015-2019 Shelby GT350\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eStainless Steel Catted X-Pipe Construction\u003c\/h3\u003e\u003cp\u003eKooks builds this X-pipe from stainless steel, and the catalytic converters are part of the mid-pipe assembly itself, so no separate converter housings are needed. The 3 inch inlet side matches up with Kooks headers, and the outlet end narrows to 2-3\/4 inch to meet the factory exhaust.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe X-pipe layout links the left and right banks between the headers and the rear exhaust. The tuner-grade high-flow converters from Kooks keep catalysts in the system as part of a Kooks header setup. Because the factory mufflers stay on the car, the rear section of the stock GT350 exhaust remains in place.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eThe factory exhaust has to be cut to fit this X-pipe.\u003c\/li\u003e\n\u003cli\u003eThe X-pipe is designed to work only with Kooks headers and must be paired with them.\u003c\/li\u003e\n\u003cli\u003eThe outlets connect to the stock exhaust, and the original mufflers are reused.\u003c\/li\u003e\n\u003cli\u003eNot legal for sale, installation, or use on any licensed vehicle in California, and does not meet CARB compliance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eLinks a Kooks header installation to the factory GT350 exhaust without replacing the mufflers.\u003c\/li\u003e\n\u003cli\u003eKeeps catalytic converters in the system through the built-in Kooks high-flow tuner units.\u003c\/li\u003e\n\u003cli\u003eOutlets sized to the factory pipes let you keep the stock rear exhaust.\u003c\/li\u003e\n\u003cli\u003eStainless steel construction for a mid-pipe that sits directly beneath the car.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2019 Ford Mustang GT350\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eStainless steel X-pipe with Kooks high-flow tuner catalytic converters built in\u003c\/li\u003e\u003c\/ul\u003e","brand":"Kooks","offers":[{"title":"Default Title","offer_id":68306106974393,"sku":"KSH11543200","price":2039.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/ee47faa88fe48389cb1d31a3bc3c9cfe_130.png?v=1794436153"},{"product_id":"qtp-2015-2017-ford-mustang-gt-qtp-aggressor-cutout-pipes-550015","title":"QTP 2015-2017 Ford Mustang GT QTP Aggressor Cutout Pipes - 550015","description":"\u003cp\u003eThe QTP Aggressor Cutout Pipes, part number 550015, are an electric exhaust cutout kit engineered specifically for the 2015-2017 Ford Mustang GT with the 5.0L V8. Instead of asking the installer to choose a mounting location and fabricate the plumbing, QTP has already worked out the routing for this application, with the layout chosen for clearance, sound, and power. The kit uses 2.5 inch 304 stainless steel mandrel-bent tubing paired with two electric valves controlled by a toggle switch.\u003c\/p\u003e\n\u003cp\u003eThe appeal of an electric cutout is the ability to choose how the car sounds at any given moment. With the valves closed, exhaust follows its normal path through the existing system for quieter operation. Flip the switch and the valves open, giving a much louder, more aggressive tone. The kit uses a cut and clamp installation, does not require welding, is made in the USA, and is compatible with aftermarket exhaust systems, making it a practical option for S550 GT owners who want driver-selectable sound without giving up a quiet mode.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eElectric cutout pipe kit designed specifically for the 2015-2017 Mustang GT 5.0L\u003c\/li\u003e\n\u003cli\u003eTwo electric valves operated by a toggle switch for on-demand control of sound and power\u003c\/li\u003e\n\u003cli\u003e304 stainless steel construction throughout\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing with a 2.5 inch diameter\u003c\/li\u003e\n\u003cli\u003eNatural finish\u003c\/li\u003e\n\u003cli\u003eCut and clamp installation with no welding required\u003c\/li\u003e\n\u003cli\u003eVehicle-specific placement, so the mounting location is predetermined\u003c\/li\u003e\n\u003cli\u003eCompatible with aftermarket exhaust systems\u003c\/li\u003e\n\u003cli\u003eNot compatible with aftermarket long tube headers\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUSA-Made 304 Stainless Steel Mandrel-Bent Construction\u003c\/h3\u003e\u003cp\u003eQTP builds the Aggressor kit from 304 stainless steel, and the tubing is mandrel bent and produced in the USA. The 2.5 inch pipes are left in a natural finish, giving the system a clean stainless appearance under the car.\u003c\/p\u003e\u003cp\u003eBecause the kit is designed around this specific chassis, QTP has already determined where the cutouts sit and how the tubing is routed, with the goal of maintaining clearance while delivering the intended sound and performance. Stainless steel exhaust clamps are used to secure the components, keeping the hardware consistent with the rest of the system.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe core benefit of this kit is driver control. The two electric valves are operated from a toggle switch, so you can keep the Mustang GT relatively quiet for daily driving or open the cutouts for a significantly louder, more aggressive exhaust note whenever you choose.\u003c\/p\u003e\u003cp\u003eQTP states the layout was designed with sound and power in mind, and the system gives the user full control over both. No specific horsepower or torque figures are provided by the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eInstallation uses a cut and clamp method, meaning the existing exhaust is cut and the cutout pipes are clamped in place\u003c\/li\u003e\n\u003cli\u003eNo welding is required\u003c\/li\u003e\n\u003cli\u003eThe mounting location is predetermined for this vehicle, so no layout planning is needed\u003c\/li\u003e\n\u003cli\u003eInstructions and hardware are supplied with the kit\u003c\/li\u003e\n\u003cli\u003eWill not fit vehicles equipped with aftermarket long tube headers\u003c\/li\u003e\n\u003cli\u003eCan be used with aftermarket exhaust systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSwitch between a quieter exhaust and a much louder one at any time using the included toggle switch\u003c\/li\u003e\n\u003cli\u003eAvoid fabrication work, since the routing and valve placement are already engineered for the 2015-2017 Mustang GT 5.0L\u003c\/li\u003e\n\u003cli\u003eInstall without welding thanks to the cut and clamp design\u003c\/li\u003e\n\u003cli\u003e304 stainless steel mandrel-bent tubing provides a durable, clean-looking setup\u003c\/li\u003e\n\u003cli\u003eWorks alongside an existing aftermarket exhaust system\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2015-2017 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment notes:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eWill not fit with aftermarket long tube headers\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eExhaust clamps (stainless steel)\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 304 stainless steel tubing, made in the USA\u003c\/li\u003e\n\u003cli\u003eTwo electric cutout valves with a toggle switch\u003c\/li\u003e\n\u003cli\u003eInstallation instructions and mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"QTP","offers":[{"title":"Default Title","offer_id":68306131583161,"sku":"QTP550015","price":819.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/f708c7f4e1603615b012f1a6a7602d23.png?v=1794436157"},{"product_id":"bbk-2015-2026-ford-mustang-gt-resonator-delete-x-pipe-with-high-flow-design-direct-bolt-on","title":"BBK 2015-2026 Ford Mustang GT Resonator Delete X-Pipe with High-Flow Design (Direct Bolt-On)","description":"\u003cp\u003eThe BBK Performance high-flow resonator delete X-pipe replaces the restrictive factory resonator on 5.0L Mustang GT models from 2015 onward. It fits directly where the OEM resonator assembly mounts and uses an X-pipe layout to provide a less restrictive path for exhaust gases. BBK designs it to increase horsepower and torque and to give the car a more aggressive exhaust note than stock.\u003c\/p\u003e\n\u003cp\u003eThe pipe is intended for S550 and later Mustang GT owners who want more performance and sound from the mid-section of the exhaust without replacing the entire system. BBK offers it for the factory exhaust and for aftermarket systems that use full-length exhaust headers, so confirm your exhaust configuration before ordering. It is built from CNC mandrel-bent tubing and is designed and manufactured in the USA.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete pipe that replaces the factory OEM resonator\u003c\/li\u003e\n\u003cli\u003eX-pipe configuration with a high-flow design\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent tubing to improve exhaust flow\u003c\/li\u003e\n\u003cli\u003eDesigned to increase horsepower and torque\u003c\/li\u003e\n\u003cli\u003eProduces a more aggressive exhaust sound than the stock resonator\u003c\/li\u003e\n\u003cli\u003eOffered for the factory exhaust or for aftermarket systems using full-length exhaust headers\u003c\/li\u003e\n\u003cli\u003eSpecial reducers allow fitment to the factory exhaust where applicable\u003c\/li\u003e\n\u003cli\u003eIncludes detailed instructions plus the hardware and clamps required for installation\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA by BBK Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCNC Mandrel-Bent Tubing, Designed and Built in the USA\u003c\/h3\u003e\u003cp\u003eBBK forms the tubing for this resonator delete X-pipe with CNC mandrel bending. Mandrel bending keeps the tube diameter consistent through each bend, avoiding the crimped sections that restrict flow in press-bent pipe. CNC control keeps the bends consistent, which supports the direct-fit replacement of the factory resonator.\u003c\/p\u003e\u003cp\u003eBBK Performance designs and manufactures the pipe in the USA.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eThe factory resonator restricts exhaust flow. Removing it in favor of a high-flow X-pipe with mandrel-bent tubing lets the engine move exhaust gases more freely. BBK states that this improved flow increases horsepower and torque on the 5.0L Mustang GT.\u003c\/p\u003e\u003cp\u003eDeleting the resonator also changes the character of the exhaust. BBK designed this pipe to give the Mustang GT a more aggressive sound than the stock setup.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit replacement for the factory OEM resonator\u003c\/li\u003e\n\u003cli\u003eDetailed instructions, hardware, and clamps are included in the kit\u003c\/li\u003e\n\u003cli\u003eWhen installing on the factory exhaust, special reducers are used where applicable, and cutting and clamping is required\u003c\/li\u003e\n\u003cli\u003eVersions are offered for the factory exhaust and for aftermarket systems with full-length headers, so confirm your application before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the restrictive factory resonator to improve exhaust flow on the 5.0L Mustang GT\u003c\/li\u003e\n\u003cli\u003eGives the car a more aggressive exhaust note than stock\u003c\/li\u003e\n\u003cli\u003eCNC mandrel-bent tubing helps maintain flow through the bends\u003c\/li\u003e\n\u003cli\u003eCan be used with the factory exhaust or with aftermarket full-length header systems\u003c\/li\u003e\n\u003cli\u003eComes with instructions, hardware, and clamps for the installation\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in the USA by BBK Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eResonator delete X-pipe\u003c\/li\u003e\n\u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n\u003cli\u003eAll required hardware\u003c\/li\u003e\n\u003cli\u003eAll required clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BBK Performance Parts","offers":[{"title":"Default Title","offer_id":68306134958265,"sku":"BBK1818","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/50a4fb9dbad582f4307e322946ab9cd9.jpg?v=1794782261"},{"product_id":"stainless-works-2018-2026-ford-mustang-gt-mid-resonator-delete-x-pipe-with-high-flow-design-direct-fit","title":"Stainless Works 2018-2026 Ford Mustang GT Mid-Resonator Delete X-Pipe with High-Flow Design (Direct-Fit)","description":"\u003cp\u003eThe Stainless Works Mid-Resonator Delete X-Pipe is a direct-fit crossover for the 2018-2026 Ford Mustang GT with the 5.0L V8. It takes the place of the factory resonator in the middle of the exhaust system, putting a performance X-style crossover where the stock muffling chamber used to sit. The goal is a more distinctive exhaust note and better flow from the Coyote engine without rebuilding the whole system.\u003c\/p\u003e\n\u003cp\u003eBecause it is built as a clamp-in part, it suits owners who want a meaningful exhaust change they can handle in their own garage. The pipe uses smooth mandrel bends to keep exhaust gases moving efficiently and is fully TIG welded for strength and a clean finished look. The clamps needed to fit it are included. For Mustang GT owners who want more sound and a freer-flowing mid-section, it is a simple upgrade to the factory hardware.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete that removes the factory middle resonator\u003c\/li\u003e\n\u003cli\u003eX-pipe crossover design for the 2018-2026 Mustang GT 5.0L\u003c\/li\u003e\n\u003cli\u003eSmooth mandrel bends to optimize exhaust flow\u003c\/li\u003e\n\u003cli\u003eFully TIG welded construction for strength and appearance\u003c\/li\u003e\n\u003cli\u003eDirect-fit, clamp-in installation\u003c\/li\u003e\n\u003cli\u003eClamps included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent, Fully TIG-Welded Construction\u003c\/h3\u003e\u003cp\u003eStainless Works forms the tubing with smooth mandrel bends, which hold a consistent pipe diameter through each turn instead of crimping or flattening the tube. That consistency helps exhaust gases move through the crossover with less restriction.\u003c\/p\u003e\u003cp\u003eEvery joint is fully TIG welded. TIG welding gives precise, controlled beads that add structural strength at the seams and leave a neat, professional appearance on the finished part.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory mid resonator removes one of the stock exhaust's main sound-dampening components, so the 5.0L's exhaust note comes through more clearly. The X-pipe crossover then routes and merges flow between the two sides of the system.\u003c\/p\u003e\u003cp\u003eThe manufacturer presents the part as a way to improve both sound and power. It does not publish specific horsepower or torque figures.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned as a direct-fit, clamp-in installation\u003c\/li\u003e\n\u003cli\u003eRequired clamps are included with the X-pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRemoves the factory mid resonator for a more noticeable exhaust note from the 5.0L V8\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing keeps flow smooth through the crossover\u003c\/li\u003e\n\u003cli\u003eFully TIG welded joints provide strength and a clean look\u003c\/li\u003e\n\u003cli\u003eClamp-in, direct-fit design suits owners who do their own work\u003c\/li\u003e\n\u003cli\u003eComes with the clamps needed for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2018-2026 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMid-resonator delete X-pipe\u003c\/li\u003e\n\u003cli\u003eClamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Stainless Works","offers":[{"title":"Default Title","offer_id":68306141577401,"sku":"SSWM18RESDX","price":546.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/m18resdx-1-primary.jpg?v=1794436169"},{"product_id":"remus-2015-ford-mustang-coupe-cabrio-2-3l-ecoboost-non-resonated-front-section-pipe","title":"Remus 2015 Ford Mustang Coupe\/Cabrio 2.3L Ecoboost Non-Resonated Front Section Pipe","description":"\u003cp\u003eThe Remus Non-Resonated Front Section Pipe is an exhaust connecting pipe for the 2015 Ford Mustang with the 2.3L EcoBoost four-cylinder. As the name states, this front section is non-resonated, meaning it does not include a resonator in its design. It comes from Remus, the European exhaust manufacturer, and is intended for owners building out the exhaust on their EcoBoost-powered S550.\u003c\/p\u003e\n\u003cp\u003eThis pipe suits enthusiasts assembling a Remus exhaust system on a 2015 EcoBoost Mustang who want a front section without a resonator. Because the supplier listing gives very little technical detail, confirm the configuration and compatibility with the rest of your exhaust components before ordering.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eNon-resonated front section pipe with no resonator in the design\u003c\/li\u003e\n\u003cli\u003eDeveloped for the 2015 Ford Mustang 2.3L EcoBoost\u003c\/li\u003e\n\u003cli\u003eExhaust connecting pipe from Remus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProvides a front section pipe without a resonator for a 2015 EcoBoost Mustang exhaust build\u003c\/li\u003e\n\u003cli\u003eMade by Remus for the 2.3L EcoBoost platform, so it is intended to be used alongside other Remus exhaust components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2015 Ford Mustang EcoBoost (2.3L), Fastback\u003c\/li\u003e\u003c\/ul\u003e","brand":"Remus","offers":[{"title":"Default Title","offer_id":68306245157049,"sku":"RMS206215 1300","price":302.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/6e2ff09261609dc5322e29d5d38a9398.jpg?v=1794436179"},{"product_id":"mishimoto-2015-2018-ford-mustang-gt-x-pipe-resonator-delete-with-improved-sound-output-direct-fit-design","title":"Mishimoto 2015-2018 Ford Mustang GT X-Pipe Resonator Delete with Improved Sound Output (Direct-Fit Design)","description":"\u003cp\u003eThe Mishimoto X-Pipe Resonator Delete is a mid-pipe section for the S550-generation Ford Mustang GT that takes the place of the factory exhaust resonator. In its location, it installs an X-pipe crossover fabricated entirely from 304 stainless steel, with mandrel-bent tubing and TIG-welded joints. The aim is a less restrictive path for exhaust gases and a more pronounced exhaust note from the V8.\u003c\/p\u003e\n\u003cp\u003eThis part suits Mustang GT owners who want more volume and a sharper character from the exhaust without changing their rear mufflers. Mishimoto designed it to connect to either the factory rear mufflers or aftermarket units, and it works on both manual and automatic transmission cars. The manufacturer suggests pairing it with the Mishimoto Mustang GT Axleback exhaust for the strongest overall result. It is backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEliminates the factory resonator and installs an X-pipe crossover section in its location\u003c\/li\u003e\n\u003cli\u003eConstructed entirely of 304 stainless steel\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing for improved exhaust flow\u003c\/li\u003e\n\u003cli\u003eTIG-welded joints\u003c\/li\u003e\n\u003cli\u003eProduces a more aggressive, higher-pitched exhaust note under acceleration\u003c\/li\u003e\n\u003cli\u003eCut-and-clamp design developed specifically for the 2015-and-later Mustang GT\u003c\/li\u003e\n\u003cli\u003eClamps in place and connects to either stock or aftermarket rear mufflers\u003c\/li\u003e\n\u003cli\u003eCompatible with manual and automatic transmission vehicles\u003c\/li\u003e\n\u003cli\u003eAdditional sleeve-style exhaust clamps supplied for a secure connection\u003c\/li\u003e\n\u003cli\u003eCovered by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMandrel-Bent 304 Stainless Steel Construction\u003c\/h3\u003e\u003cp\u003eEvery section of this X-pipe is made of 304 stainless steel, a grade commonly chosen for exhaust work because it resists corrosion and holds up well to heat cycling. Mishimoto also cites the material's appearance as a benefit, which matters on a component that can be seen from under the car.\u003c\/p\u003e\u003cp\u003eThe tubing is mandrel bent, so the bends keep their diameter instead of pinching or collapsing the way crush-bent pipe can. The joints are TIG welded, a method that gives precise control over the weld and produces clean, consistent seams on stainless steel.\u003c\/p\u003e\n\u003ch3\u003ePerformance and Benefits\u003c\/h3\u003e\u003cp\u003eTaking out the factory resonator and installing an X-pipe crossover opens up the mid-section of the exhaust. Combined with the mandrel-bent tubing, this is intended to give exhaust gases a less restrictive route toward the rear mufflers.\u003c\/p\u003e\u003cp\u003eThe most noticeable change is the sound. Mishimoto states the X-pipe raises the overall volume of the Mustang GT exhaust and gives it a more aggressive, higher-pitched tone when accelerating. Because it works with factory or aftermarket rear mufflers, the final sound will depend on which mufflers are installed behind it. Mishimoto recommends combining it with its Mustang GT Axleback exhaust for the best exhaust performance.\u003c\/p\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCut-and-clamp design made specifically for the 2015-and-later Mustang GT\u003c\/li\u003e\n\u003cli\u003eClamps into place and connects to either stock or aftermarket rear mufflers\u003c\/li\u003e\n\u003cli\u003eFits both manual and automatic transmission vehicles\u003c\/li\u003e\n\u003cli\u003eAdditional sleeve-style exhaust clamps are supplied for a reliable connection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy You Need This\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eYou want a louder exhaust with a sharper, higher-pitched tone under acceleration\u003c\/li\u003e\n\u003cli\u003eYou prefer to keep your current rear mufflers, whether factory or aftermarket, while changing the exhaust character\u003c\/li\u003e\n\u003cli\u003eYou want an exhaust component made of 304 stainless steel with mandrel-bent tubing and TIG-welded joints\u003c\/li\u003e\n\u003cli\u003eYou plan to build a matched system with the Mishimoto Mustang GT Axleback exhaust\u003c\/li\u003e\n\u003cli\u003eYou value the long-term coverage of the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2015-2026 Ford Mustang GT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eX-pipe resonator delete section\u003c\/li\u003e\n\u003cli\u003eSleeve-style exhaust clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eMishimoto Lifetime Warranty\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68306247712953,"sku":"MISMMEXH-MUS8-15XP","price":348.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/MMEXH-MUS8-15XP_1.jpg?v=1794436183"}],"url":"https:\/\/engmustangs.com\/collections\/s550-mufflers-resonator-deletes.oembed?page=2","provider":"ENG Mustangs","version":"1.0","type":"link"}