{"title":"S197 Mustang Tuning \u0026 Electronics","description":null,"products":[{"product_id":"raxiom-11-22-ford-mustang-f-150-ranger-axial-series-speedform-series-throttle-controller-407056","title":"Raxiom 11-22 Ford Mustang F-150 Ranger Axial Series SpeedForm Series Throttle Controller - 407056","description":"\u003cp\u003eEliminate your vehicles's sluggish throttle response with a SpeedForm Throttle Response Controller. All modern vehicles use a drive-by-wire system that controls the throttle body electronically, similar to a dimmer switch. While innovative, this design causes an irritating delay that is most noticeable when trying to speed up to merge with fast moving traffic or when passing a slower moving car. The SpeedForm Throttle Response Controller actually boost this signal to eliminate the delay for quicker, snappier throttle response, making it a must have for all drive-by-wire vehicles. The SpeedForm Throttle Response Controller comes with (5) preset control modes for Stock, Eco, Comfort\/Sport, Sport and Race applications. Each mode can further be adjusted with nine levels of sensitivity. This allows you to select the mode that works the best for your own personal driving style and needs. Stock - Acceleration is set to factory defaults. Display is NO. ECO - Designed for fuel economy. Display is EC. Comfort\/Sport - Balances performance and fuel economy. Display is P1. Sport - Improves engine response for better performance during daily commuting. Display is P2. Race - Maximum performance with immediate throttle response. Display is P3. The SpeedForm Throttle Response Controller connects directly into the stock throttle position sensor found on the drive-by-wire gas pedal using an OEM style plug and play connector with no permanent modifications required. The Throttle Response Controller is 100% reversible and will not leave residual codes on the factory PCM making it warranty friendly.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStock, Eco, Sport\/Comfort, Sport, and Race Modes\u003c\/li\u003e\n\u003cli\u003eNine Positions of Sensitivity Adjustment\u003c\/li\u003e\n\u003cli\u003eEliminates Drive-By-Wire Pedal Delay\u003c\/li\u003e\n\u003cli\u003eEasy Plug-and-Play Installation\u003c\/li\u003e\n\u003cli\u003eEnhances Vehicle Acceleration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2022 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003e407056\u003c\/p\u003e","brand":"Raxiom","offers":[{"title":"Default Title","offer_id":68327205470393,"sku":"RAX407056","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/d89a27283b95bdf330156b4c23e87016.jpg?v=1794520577"},{"product_id":"afe-sprint-booster-power-converter-2011-2021-mustang-77-13005","title":"AFE Sprint Booster Power Converter (2011-2021 Mustang) - 77-13005","description":"\u003cp\u003eSilver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency.  Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated\/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDoes Not Affect The Vehicles Electronic System\u003c\/li\u003e\n\u003cli\u003eReduces Throttle Response Time\u003c\/li\u003e\n\u003cli\u003eThree Position Settings\u003c\/li\u003e\n\u003cli\u003eImproves Acceleration\u003c\/li\u003e\n\u003cli\u003eEasy To Install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2021 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003e77-13005\u003c\/p\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":68327208517817,"sku":"AFE77-13005","price":314.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/f59c50492a04782fa82fb65cb76b8e6eL.jpg?v=1794520654"},{"product_id":"ford-performance-5-2l-mustang-gt500-engine-control-pack-m-6017-m52sc","title":"Ford Performance 5.2L Mustang GT500 Engine Control Pack - M-6017-M52SC","description":"\u003cp\u003eAdd a unique, stealth look to your Bronco with a blackout exterior package\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePCM w\/Ford Performance Calibration Requires Return Type Fuel System\u003c\/li\u003e\n\u003cli\u003eWill Not Work With Returnless Fuel System\u003c\/li\u003e\n\u003cli\u003eIncludes Electronic Throttle Control Accelerator Pedal Which Eliminates Throttle Cable Routing Problems\u003c\/li\u003e\n\u003cli\u003eUnique Control Pack Harness Replaces Stock Body Harness And Is Designed For Custom Vehicle Builds\u003c\/li\u003e\n\u003cli\u003eFeatures OBD-ll Diagnostic Port To Assist In Vehicle Calibration Upload And Problem Diagnosis\u003c\/li\u003e\n\u003cli\u003eInstallation Of This PCM In A Production GT500 Mustang Will Result In A No-Start Condition\u003c\/li\u003e\n\u003cli\u003eDesigned To Run M-6007-M52SC GT500 Crate Engine With A Manual Transmission\u003c\/li\u003e\n\u003cli\u003ePCM w\/Ford Performance Calibration Requires Return Type Fuel System\u003c\/li\u003e\n\u003cli\u003eIncludes Production PCM With Ford Performance Calibration\u003c\/li\u003e\n\u003cli\u003eWill Not Work With Returnless Fuel System\u003c\/li\u003e\n\u003cli\u003eNot For Use With 2007-2014 GT500 Engines\u003c\/li\u003e\n\u003cli\u003eNot For Use With GT350 5.2L Engines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2020-2026 Ford Mustang GT500\u003c\/li\u003e\n\u003cli\u003e2007-2014 Ford Mustang GT500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eM-6017-M52SC\u003c\/p\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68327212220601,"sku":"FRPM-6017-M52SC","price":2420.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/642c1dd195c0dcbb7eca25494e3c4b00.jpg?v=1794520748"},{"product_id":"ngk-6510-ltr7ix-11-spark-plugs-set-of-8","title":"NGK 6510 LTR7IX-11 Spark Plugs (Set of 8)","description":"\u003cp\u003eThe NGK ignition upgrade is built for 2011-2023 Ford Mustang (S197 \/ S550) applications. Fitment, specifications and options are listed below.\u003c\/p\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2023 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e","brand":"NGK","offers":[{"title":"Default Title","offer_id":68327236993209,"sku":"NGK-LTR7IX-11-8","price":79.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/m198668896.jpg?v=1794521250"},{"product_id":"ford-performance-5-0l-mustang-cold-spark-plug-set-2011-2024-5-0l-coyote-engines-with-aftermarket-superchargers","title":"Ford Performance 5.0L Mustang Cold Spark Plug Set (2011-2024 5.0L Coyote Engines with Aftermarket Superchargers)","description":"\u003cp\u003eFor more than 35 years Ford Performance Parts has been producing and developing performance parts with enthusiasts in mind. Whether you are building from the ground up or working to get that extra tenth of a second, Ford Performance delivers the products you need.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eSpark Plugs\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2011-2014 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003cli\u003e2011-2021 Ford Mustang GT\u003c\/li\u003e\n\u003cli\u003e2011-2021 Ford Mustang GT (5.0L)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eM-12405-M50A\u003c\/p\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68327237058745,"sku":"FRPM-12405-M50A","price":80.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/123387d3f2795351075d344eb5e9f93e.jpg?v=1794521252"},{"product_id":"ford-performance-early-5-0l-coyote-ignition-coil-set-2011-2016-mustang-gt-f-150-5-0l","title":"Ford Performance Early 5.0L Coyote Ignition Coil Set (2011-2016 Mustang GT \/ F-150 5.0L)","description":"\u003cp\u003eFord Racing 5.0L Coyote Engine Ignition Coil sets are designed for use on 2011-2015 Mustang GT 5.0L Coyote applications. These coils are direct replacements for the stock coils, so you can be assured of accurate performance.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGreat For Custom Builds Or Service\u003c\/li\u003e\n\u003cli\u003eOEM Coyote Coils\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2016 Ford Mustang GT (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eM-12029-M50C\u003c\/p\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68327238140089,"sku":"FRPM-12029-M50C","price":432.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/97a59d461f64c68b0b11c28b1f235a59.jpg?v=1794521253"},{"product_id":"mishimoto-ignition-coil-single-coil-2011-2016-mustang-5-0l-f-150-mmig-mus8-11","title":"Mishimoto Ignition Coil - Single Coil (2011-2016 Mustang 5.0L \/ F-150 ) - MMIG-MUS8-11","description":"\u003cp\u003eThe basic requirements for a properly running engine are fuel, air, compression, and spark. Before increasing the power of your V8, it is wise to ensure all maintenance is up to date and these processes are performing as intended. Weak spark from your ignition system can result in misfiring under high load driving, and spark blow-out under high boost, which is bad for performance. Mishimoto is proud to launch our new lineup of ignition coils, aimed at providing a high-quality replacement that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. Our ignition coils are designed and tested to meet or exceed OEM Ford performance standards and are available as a single coil or in sets of four. Once installed with a set of new spark plugs, one can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance from your Coyote. The primary frame of our coils is constructed from extremely robust phenolic resin, ensuring optimal longevity in high temperature environments. The precision lower boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. In addition, our coils are pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil. Mishimoto ignition coils are an ideal replacement for worn or defective factory coils. As with all our products, these ignition coils include our signature Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned and tested to meet or exceed OEM Ford performance specifications\u003c\/li\u003e\n\u003cli\u003eHigh-quality replacement coils available in full sets or single units\u003c\/li\u003e\n\u003cli\u003eImproves engine startup, idle, and restores performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2016 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMIG-MUS8-11\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327239123129,"sku":"MISMMIG-MUS8-11","price":53.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c3bbd358a39487b4c7ebd796992e17baL.jpg?v=1794521295"},{"product_id":"mishimoto-ignition-coil-fits-ford-mustang-5-0l-2011-2016-set-of-8-mmig-mus8-1108","title":"Mishimoto Ignition Coil, Fits Ford Mustang 5.0L 2011-2016, Set Of 8 - MMIG-MUS8-1108","description":"\u003cp\u003eThe basic requirements for a properly running engine are fuel, air, compression, and spark. Before increasing the power of your V8, it is wise to ensure all maintenance is up to date and these processes are performing as intended. Weak spark from your ignition system can result in misfiring under high load driving, and spark blow-out under high boost, which is bad for performance. Mishimoto is proud to launch our new lineup of ignition coils, aimed at providing a high-quality replacement that can bring your vehicle up to Stage 0 before moving on to horsepower adding modifications. Our ignition coils are designed and tested to meet or exceed OEM Ford performance standards and are available as a single coil or in sets of four. Once installed with a set of new spark plugs, one can expect a refreshed ignition system with improved engine startup, a smoother idle, and restored performance from your Coyote. The primary frame of our coils is constructed from extremely robust phenolic resin, ensuring optimal longevity in high temperature environments. The precision lower boot provides a barrier against moisture entry into the plug well, eliminating chances for spark plug contamination. In addition, our coils are pre-lubricated with dielectric grease to prevent corrosion and ensure an optimal connection between the spark plug and coil. Mishimoto ignition coils are an ideal replacement for worn or defective factory coils. As with all our products, these ignition coils include our signature Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDesigned and tested to meet or exceed OEM Ford performance specifications\u003c\/li\u003e\n\u003cli\u003eHigh-quality replacement coils available in full sets or single units\u003c\/li\u003e\n\u003cli\u003eImproves engine startup, idle, and restores performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2011-2016 Ford Mustang (5.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eMMIG-MUS8-1108\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":68327239155897,"sku":"MISMMIG-MUS8-1108","price":351.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c3bbd358a39487b4c7ebd796992e17baL_bc18022f-9237-4696-86b8-286610c1cda5.jpg?v=1794521296"},{"product_id":"edelbrock-covers-coil-supercharged-4-6l-ford-mustang-gts-2005-2009","title":"Edelbrock Covers Coil Supercharged 4 6L Ford Mustang GTs 2005-2009","description":"\u003cp\u003eEdelbrock part #41133 aluminum coil covers are designed for 2005-10 Mustang GT 4.6L with an Edelbrock supercharger. Our kit is geared towards those with competition versions of the supercharger kits, which do not include coil covers, but would like to add them. Covers are designed to fit around the supercharger unit and will not fit naturally aspirated motors.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFor Use w\/ Supercharger Systems\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2005-2009 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003e41133\u003c\/p\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":68407766581433,"sku":"41133","price":497.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/f750f80698a2d7e20c513d06e48d5304.jpg?v=1794729242"},{"product_id":"ford-racing-07-14-mustang-svt-4v-ignition-coil-set","title":"Ford Racing 07-14 Mustang SVT 4V Ignition Coil Set","description":"\u003cp\u003eFord Racing 2007-12 Mustang SVT 4V ignition coil sets are designed for use on 2007-12 Shelby GT500 5.4L DOHC applications. These coils are direct replacements for the stock coils, so you can be assured of accurate performance.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGreat For Custom Builds Or Service\u003c\/li\u003e\n\u003cli\u003eCompatible With 4V 5.4L Engines\u003c\/li\u003e\n\u003cli\u003eSVT High Voltage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2007-2014 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eM-12029-4V\u003c\/p\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68407766745273,"sku":"M-12029-4V","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/a75bf72f2f4b61efc9b9ed4973831899.jpg?v=1794729247"},{"product_id":"ford-racing-07-14-mustang-svt-coil-covers","title":"Ford Racing 07-14 Mustang SVT Coil Covers","description":"\u003cp\u003eThese Ford Racing ignition coil covers dress up almost any 4.6L or 5.4L DOHC engines with coil-on-plug ignition systems. These coil covers are available in a variety of finishes and logos. Let the competition know you are serious about performance!\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOriginal Equipment\u003c\/li\u003e\n\u003cli\u003ePowder Coat Finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2007-2014 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eM-6067-C\u003c\/p\u003e","brand":"Ford Performance Parts","offers":[{"title":"Default Title","offer_id":68407766843577,"sku":"M-6067-C","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/108e1ba642ae5deb856ea076d7130359.jpg?v=1794729250"},{"product_id":"granatelli-05-10-ford-mustang-6cyl-4-0l-performance-ignition-wires","title":"Granatelli 05-10 Ford Mustang 6Cyl 4.0L Performance Ignition Wires","description":"\u003cp\u003eThis blue 0-ohm spark plug wire set, Granatelli Motor Sports part number 26-1899S, fits the 2001-2010 Ford Mustang\/Ranger\/Explorer Sport Trac\/Explorer and Mazda B4000 with the 4.0L V6 engine. Before ordering, confirm your year, model and engine in the fitment chart below - for example, the 2005-2010 Ford Mustang 4.0L V6. 0 Ohm High Performance Spark Plug Wires: Upgrade your ignition system with Granatelli Motor Sports 0 Ohm performance ignition wires. Designed to deliver maximum ignition energy to the spark plug, these performance wires feature ultra-low resistance, patented noise suppression technology, stainless-steel connectors, and high-temperature silicone boots. Ideal for high-performance street, race, forced-induction, and modified applications. Built for Street \u0026amp; Race Performance: These Granatelli 0 Ohm ignition wires are designed for modern fuel-injected vehicles, street cars, race applications, and modified engines. They are especially well suited for applications using aftermarket headers, turbochargers, superchargers, or other performance upgrades. Vehicle Fitment: Fits the select vehicles listed below equipped with the V6 4L engine. Year \/ Make \/ Model \/ Engine: 2005-2010 \/ Ford \/ Mustang \/ V6 4L; 2001-2007 \/ Mazda \/ B4000 \/ V6 4L; 2001-2010 \/ Ford \/ Ranger \/ V6 4L; 2001-2005 \/ Ford \/ Explorer Sport Trac \/ V6 4L; 2001-2003 \/ Ford \/ Explorer \/ V6 4L. Product Specifications: Brand: Granatelli Motor Sports; Part Number: 26-1899S; Product Type: 0 Ohm High Performance Spark Plug Wires; Resistance: 0 Ohm; Wire Diameter: 8MM; Boot Material: High-Temperature Silicone; Connector: Stainless Steel Snap-Lock; Interference Protection: RFI \/ EMI Suppression; Temperature Rating: Up to 500F.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSpark plug wire built for performance and reliable fitment. Improves drivability, durability, and overall vehicle feel.\u003c\/li\u003e\n\u003cli\u003eignition wire built for performance and reliable fitment. Improves drivability, durability, and overall vehicle feel.\u003c\/li\u003e\n\u003cli\u003eengine line built for performance and reliable fitment. Improves drivability, durability, and overall vehicle feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2005-2010 Ford Mustang V6 (4.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003e26-1899S\u003c\/p\u003e","brand":"Granatelli Motor Sports","offers":[{"title":"Default Title","offer_id":68407767597241,"sku":"26-1899S","price":142.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/c1330c55238c5f23d64999c7103ac552L.jpg?v=1794729285"},{"product_id":"jba-05-10-ford-ranger-05-10-ford-mustang-4-0l-ignition-wires-red","title":"JBA 05-10 Ford Ranger 05-10 Ford Mustang 4.0L Ignition Wires - Red","description":"\u003cp\u003eJBA PowerCables™ ignition wires provide less than half the resistance of most factory wires freeing spark energy and increasing performance! They feature 100% silicone jackets and unique boot ends designed for maximum clearance and long life for severe duty applications. These heavy-duty ignition wires come standard with wire-wound mag conductors for superior Electromagnetic Interference suppression (EMI). Why put old ignition wires on your new JBA equipped engine? Add JBA PowerCables for the best performance and reliability.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWire wound mag conductors for superior Electro Magnetic Interference suppression\u003c\/li\u003e\n\u003cli\u003eCustom tailored lengths w\/cylinder I.D. labels for easy installation\u003c\/li\u003e\n\u003cli\u003e100%   silicone jackets that are resistant to heat and abrasion\u003c\/li\u003e\n\u003cli\u003eExtra thick diameters for improved under hood appearance\u003c\/li\u003e\n\u003cli\u003eUltra low resistance design for improved performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2005-2010 Ford Mustang V6 (4.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eW0675\u003c\/p\u003e","brand":"JBA","offers":[{"title":"Default Title","offer_id":68407767826617,"sku":"W0675","price":136.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/29ddc647e95a9ee73c0053e28533ac4c.jpg?v=1794729291"},{"product_id":"jba-01-05-ford-ranger-05-10-ford-mustang-4-0l-ignition-wires-blue","title":"JBA 01-05 Ford Ranger\/05-10 Ford Mustang 4.0L Ignition Wires - Blue","description":"\u003cp\u003eJBA PowerCables™ ignition wires provide less than half the resistance of most factory wires freeing spark energy and increasing performance! They feature 100% silicone jackets and unique boot ends designed for maximum clearance and long life for severe duty applications. These heavy-duty ignition wires come standard with wire-wound mag conductors for superior Electromagnetic Interference suppression (EMI). Why put old ignition wires on your new JBA equipped engine? Add JBA PowerCables for the best performance and reliability.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWire wound mag conductors for superior Electro Magnetic Interference suppression\u003c\/li\u003e\n\u003cli\u003eCustom tailored lengths w\/cylinder I.D. labels for easy installation\u003c\/li\u003e\n\u003cli\u003e100%   silicone jackets that are resistant to heat and abrasion\u003c\/li\u003e\n\u003cli\u003eExtra thick diameters for improved under hood appearance\u003c\/li\u003e\n\u003cli\u003eUltra low resistance design for improved performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2005-2010 Ford Mustang V6 (4.0L)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003eW06759\u003c\/p\u003e","brand":"JBA","offers":[{"title":"Default Title","offer_id":68407767859385,"sku":"W06759","price":138.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/63f70a5d90bb56710bebb13457b74109.jpg?v=1794729292"},{"product_id":"nitrous-express-05-14-ford-mustang-custom-switch-panel","title":"Nitrous Express 05-14 Ford Mustang Custom Switch Panel","description":"\u003cp\u003eThese NX switch panels offer a clean and attractive switching solution for nitrous systems as well as many other electrical devices. These switch panels include a variety of interchangeable laser engraved switch nameplates allowing you to change any switch to any location.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eIncludes A Variety Of Interchangeable Laser Engraved Nameplates\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eVehicle Fitment\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2005-2014 Ford Mustang\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003ePart Number\u003c\/h3\u003e\u003cp\u003e15785\u003c\/p\u003e","brand":"Nitrous Express","offers":[{"title":"Default Title","offer_id":68407770185913,"sku":"15785","price":76.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0835\/3182\/5337\/files\/5de23991c25362c1bb5cf53dae36c586.jpg?v=1794729376"}],"url":"https:\/\/engmustangs.com\/collections\/s197-tuning-electronics.oembed","provider":"ENG Mustangs","version":"1.0","type":"link"}